NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

301

National Test House (WR), Mumbai

RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter V/Cl. 3.2 (Abrasion resistance-1000 cycles)	3000.0
Chapter V/Cl. 3.2 (Humidity test.)	11000.0
Chapter V/Cl. 3.2 (Durability Tests : Accelerated weathering test)	110000.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to solvents)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to water)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to oil)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to 20% caustic potash (weight by volume))	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume))	1500.0
Chapter V/Cl. 3.2 (Gloss at 60 degree angle of incidence)	1200.0
Chapter V/Cl. 3.2 (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter V/Cl. 3.2 (Fineness of grind)	1200.0
Chapter V/Cl. 3.2 (Theoretical Spreading rate)	1200.0
Chapter V/Cl. 3.2 (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter V/Cl. 3.2 (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter V/Cl. 3.2 (Mass in Kg/10 litres)	1200.0
Chapter V/Cl. 3.2 (Keeping Properties for both the packs)	5000.0
Chapter V/Cl. 3.2 (Flash Point (b) Component B)	1200.0
Chapter V/Cl. 3.2 (Flash Point (a) Component A)	1200.0
Chapter V/Cl. 3.2 (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter V/Cl. 3.2 (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter V/Cl. 3.2 (Volume solids)	1200.0
Chapter V/Cl. 3.2 (Dry film thickness/Per coat)	1200.0
Chapter V/Cl. 3.2 (Colour)	1200.0
Chapter V/Cl. 3.2 (Finish)	1200.0
Chapter V/Cl. 3.2 (Consistency)	1200.0
Chapter IV / Table I (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter V/Cl. 3.2 (Drying time b) Hard Dry)	1200.0
Chapter V/Cl. 3.2 (Drying time a) Surface Dry)	1200.0
Chapter II/Cl. 4.1 (Theoretical Spreading Capacity)	1200.0
Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation)	9000.0
Chapter II/Cl. 4.1 (Resistance to salt spray)	21000.0
Chapter II/Cl. 3.2.1.2 (Pigment Content)	1500.0
Chapter II/Cl. 3.2.1.1 Table 1 (Weight per epoxy equivalent on non-volatile vehicle content basis)	3000.0
Durability test (Durability test, Accelerated test for durability, 750 hrs, (ASTM G 53) 4 hrs UV and 4 hrs condensation)	45000.0

302

National Test House (NR), Ghaziabad

398 (Part-4) (1994) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES, PART 4 ALUMINIUM ALLOY STRANDED CONDUCTORS (ALUMINIUM-MAGNESIUM-SILICON TYPE)

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES, PART 4 ALUMINIUM ALLOY STRANDED CONDUCTORS (ALUMINIUM-MAGNESIUM-SILICON TYPE)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.4 (Lay Ratio)	1000.0
6 (Freedom From Defects)	1000.0
7.1 (Wire Diameter)	1000.0
12.2.1 (Breaking Load Test of Strand)	3000.0
12.3 (Elongation Test)	3000.0
12.4 (Resistance Test)	2000.0
8 (Joints in Wires)	1000.0
12.2 (Breaking Load Test of Wire)	3000.0

303

National Test House (NR), Ghaziabad

NTH/NER/Custom/2022/03 - Chemical General

Chemical General

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Silica (as SiO2), % by mass)	1000.0

304

National Test House (ER), Kolkata

IS 12447 (1988) - Specification for zinc wire for sprayed zinc coatings

Specification for zinc wire for sprayed zinc coatings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Diameter, mm)	1000.0
9.1 (Tensile Strength (UTS), N/mm2)	2000.0
9.2 (Elongation %)	1000.0
9.3 (Wrapping Test)	1000.0
5.1 (Chemical Composition, Percent by Mass)	5000.0
8 (Freedom from Defects)	1000.0
8 (Wire condition)	1000.0

305

National Test House (WR), Mumbai

BSEN 13348 (2016) - Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Dimension - Outer Diameter mm, in accordanc e with BS EN 13348 (2016) Table 2, 3 and 4)	1000.0
6.3 (Dimension - Thickness of the Tube in mm in accordance with BS EN 13348(2016) Table 2, 3 and 4)	1000.0
6.2 (Tensile Strength)	2000.0
6.2 (Elongation)	1000.0
6.2 (Hardness)	2000.0
8.5 (Bending Test)	1000.0
8.6 (Drift Expansion test)	2000.0
6.1 (Cu + Ag)	4000.0
6.1 (Phosphorus (% by mass))	1000.0
6.1 (Copper (% by mass))	2000.0

306

National Test House (NR), Ghaziabad

IS 1891 : Part 1 (2021) - CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

307

National Test House (NR), Ghaziabad

IS 3735 (1996) - Canvas Shoes, Rubber Sole

Canvas Shoes, Rubber Sole

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

308

National Test House (NR), Ghaziabad

IS 13893 (1994) - Polyurethane soles semirigid - specification

Polyurethane soles semirigid - specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

309

National Test House (NR), Ghaziabad

IS 10702 (1992) - Rubber hawal chappal - Specification (Second Revision)

Rubber hawal chappal - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

310

National Test House (NR), Ghaziabad

IS 11544 (1986) - Specification for slipper, rubber

Specification for slipper, rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

311

National Test House (NR), Ghaziabad

IS 6719 (1972) - Solid Pvc Soles And Heels

Solid Pvc Soles And Heels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

312

National Test House (NR), Ghaziabad

IS 5557 : Part 2 (2018) - All rubber gum boots and ankle boots: Part 2 occupational purposes

All rubber gum boots and ankle boots: Part 2 occupational purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per Specification (Results of Test)	5000.0

313

National Test House (NR), Ghaziabad

IS 15298 : Part 2 (2016) - Personal protective equipment: Part 2 safety footwear (Second Revision)

Personal protective equipment: Part 2 safety footwear (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per specification (Results of Test)	5000.0

314

National Test House (WR), Mumbai

IS 8887 (2004) - Bitumen Emulsion for Roads (Cationic Type)

Bitumen Emulsion for Roads (Cationic Type)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 and 6.2 (Viscosity by say bolt viscometer)	1000.0
4.2 and 6.2 (Solubility in Trichloroethylene)	1000.0
4.2 an 6.2 (Residue by Evaporation)	1500.0

315

National Test House (WR), Mumbai

IS 14223 (Part 1):2023 - Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5,Table 1-(i) (Specific gravity ( as per IS 1124))	1000.0
5,Table-1(ii) (Water absorption (as per IS 1124))	1000.0
5,Table-1(iii) (Compressive strength, in N/mm2 (as per IS 1121 (Part 1)))	3000.0
5,Table-1(vi) (Hardness, in Mohs (as per IS 13630 (Part 13)))	2000.0
5,Table-1(x) (Resistance to wear- a)Average b)Individual maximum, in mm (as per IS 1706))	4000.0
custom (Moisture content (%))	500.0
custom (Dry density)	1000.0
custom (Flexural strength)	3000.0
custom (Porosity)	1000.0

316

National Test House (NWR), Jaipur

IS 9417 (2018) - Welding of high strength steel bars for reinforced concrete construction - Recommendations (Second Revision)

Welding of high strength steel bars for reinforced concrete construction - Recommendations (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.1.1 (Tensile Test)	3000.0
13.1.2 (Mechanical Bend Test)	1000.0

317

National Test House (NWR), Jaipur

IS 13620 (1993) - Fusion Bonded Epoxy Coated Reinforcing Bars -

Fusion Bonded Epoxy Coated Reinforcing Bars -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Coating Thickness)	1500.0
8 (Chemical composition)	5000.0

318

National Test House (NWR), Jaipur

CUS/SR/NDT/CUSTOM/001 (2024) - Welding wire

Welding wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Size of Wire)	1000.0
2.0 (Type of Wire)	2000.0
8 (Chemical composition)	5000.0

319

National Test House (NWR), Jaipur

Custom-7-ER-LM - Galvanized Steel Rope Net Wire

Galvanized Steel Rope Net Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Tensile Strength of Element wire)	3000.0
1 (Breaking Force of Rope)	3000.0
8 (Chemical composition)	5000.0

320

National Test House (SR), Chennai

IS 6419 (1996) - Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14.3.3 (All weld Impact test)	3000.0
14.3.2 (Ultimate Tensile Strength (All Weld Metal Mechanical Test ))	3000.0
14.3.2 (Yeild Strength (All Weld Metal Mechanical Test ))	500.0
14.3.2 (Percent Elongation (All Weld Metal Mechanical Test ))	-
14.3.1 (Preparation of Weld assembly)	5000.0
14.2 (Radiography Test)	1000.0
10.2.3 (Helix)	500.0
10.2.2 (Cast)	500.0
10.2.1 (Temper)	1000.0
10.1 (Finish)	500.0
8.3 (Dimension of Coils)	500.0
8.2 (Dimension of Rims)	500.0
8.1 (Dimension of Spools)	500.0
10.1 (Finish)	500.0
5 (Diameter of Wire)	500.0
6 (Reels of Wire)	500.0
7 (Reeling Conditions)	500.0
14.1 (Copper)	500.0
14.1 (Vanadium)	500.0
14.1 (Molybdenum)	500.0
14.1 (Chromium)	500.0
14.1 (Nickel)	500.0
14.1 (Phosphorus)	500.0
14.1 (Sulphur)	500.0
14.1 (Manganese)	500.0
14.1 (Silicon)	500.0
14.1 (Carbon)	500.0
14.1 (Aluminium)	500.0
14.1 (Zirconium)	500.0
14.1 (Titanium)	500.0

321

National Test House (ER), Kolkata

ASTM D1200 - Standard test method for Viscosity by Ford Viscosity Cup

Standard test method for Viscosity by Ford Viscosity Cup

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimensional Measurement)	2500.0

322

National Test House (NWR), Jaipur

ILC Of paper - Customized Specification for the ILC of paper

Customized Specification for the ILC of paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

323

National Test House (ER), Kolkata

Custom - Liquor

Liquor

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ethanol (% volume/volume))	1200.0
2 (Detection of Methyl Alcohol)	1200.0

324

National Test House (NER), Guwahati

IS 17505(Part-1):2021 - Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 17.1 Table 9 i) b) (Conductor resistance test)	1500.0
Clause 17.1 Table 9 iii (Minimum thickness of insulation)	250.0
Clause 17.1 Table 9 iii (Manufacturer's identification)	250.0
Clause 17.1 Table 9 iii (Average thickness of insulation)	250.0
Clause 17.1 Table 9 iii (Minimum thickness of outer sheath)	250.0
Clause 17.1 Table 9 iii (Average thickness of outer sheath)	250.0
Clause 17.1 Table 9 iii (Minimum thickness of inner sheath)	250.0
Clause 17.1 Table 9 iii (Average thickness of inner sheath)	250.0
Clause 17.1 Table 9 iv) a) (Tensile strength for insulation)	1000.0
Clause 17.1 Table 9 iv) a) (Percentage elongation for insulation)	1000.0
Clause 17.1 Table 9 iv) a) (Variation of tensile strength after ageing for insulation)	1000.0
Clause 17.1 Table 9 iv) a) (Variation in percentage elongation after ageing for insulation)	1000.0
- (2nd Core)	2000.0

325

National Test House (ER), Kolkata

IS 2721 (2003) - Galvanized steel chain link fence fabric - Specification (Second Revision)

Galvanized steel chain link fence fabric - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Uniformity of Zn coating)	1000.0
2 (Chemical analysis)	2500.0
8 (Mass of Zinc Coating)	2000.0
7 (Workmanship & Finish)	1000.0

326

National Test House (ER), Kolkata

CUSTOM - Andust

Andust

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (pH)	1200.0
2 (Specific gravity)	1200.0

327

National Test House (ER), Kolkata

CUSTOM-34-ER-MCALI - Calibration of Dial Snap Gauge

Calibration of Dial Snap Gauge

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	2000.0

328

National Test House (WR), Mumbai

Custom specification- Bipolar for metro rail (general chemical) - Custom specification- Bipolar for metro rail (general chemical)

Custom specification- Bipolar for metro rail (general chemical)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Appearance)	500.0
- (Odour)	500.0
- (Skin Irritation)	500.0
- (pH Value)	1000.0
- (Viscosity by Flow cup)	1000.0
- (Accelerated Corrosion test ( For 21 Hours) with raw water)	1500.0
- (Accelerated Corrosion (for 21 hours) with Bipolar)	1500.0
- (Specific Gravity)	1000.0

329

National Test House (NWR), Jaipur

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.xi.a (Volume solids)	3000.0
CLAUSE-4.5.2,Table-1 (Dry Film Thickness(DFT))	1500.0
6.7 (Pigment content)	1000.0
6.6.iii.a (Drying time Surface Dry)	1200.0
6.6.iii.b (Drying time Hard Dry)	1200.0
6.6.iii.d (Drying time Tack Free)	1200.0
6.6.iii.c (Hard dry at 70 DegC with 15 min flash- off time)	1200.0
6.6.ii (Mass, in kg/101itres)	1500.0
6.6.viii (Scratch hardness after 48 h air drying (1 000 g weight))	1500.0

330

National Test House (WR), Mumbai

IS 8986 (2022) (2022) - Hexagonal Integral Drill Steel and Extension Rods and Hollow Round Drill Steel in Bar Form — Dimensions (Second Revision)

Hexagonal Integral Drill Steel and Extension Rods and Hollow Round Drill Steel in Bar Form — Dimensions (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Dimension - Hexagonal Integral Drill Steel and Extension Rods in mm Clause 2.1 and Table 1 of IS 8986 or any other relevant National & International Standard Specified)	1000.0
2 (Dimension -Hollow Round Drill Steel in Bar Form for Extension Rods, in mm, Clause 2.2, Table 2 of IS 8986 or any other national or International Stanard specified)	1000.0
2 (Mass per Meter in Kg/M as per Table 1 or 2 of IS 8986 or any other National or International Standard specified.)	1000.0
0 (Rockwell Hardness Test in HRC)	2000.0
0 (Mechanical Properties - Tensile Strength, Yield Strength and % of Elongation as per IS 1608 Prt-1 or ASTM E8 or any other relevant National or International specification.)	4000.0
2 (Sectional Area in mm2 as per IS 8986 Clause 2 Table 1 /Table 2)	1000.0
0 (Chemical Composition in mass% by OES method or any other National or International product specification specified test method.)	3500.0