NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

511

National Test House (NWR), Jaipur

Custom Specification-NWR - Hardened Concrete

Hardened Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cement Content)	2500.0
2 (Silt Content)	1000.0
3 (pH Value)	500.0
4 (Alkali Aggregate Reactivity)	1000.0

512

National Test House (NWR), Jaipur

IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Breaking Load of Completed Barbed Wire)	1000.0
12.1 (Tensile Strength of Line Wire)	1000.0
12.3 (Ductility)	1000.0
12.2.1 (Zinc Coating of Line wire)	2000.0
5 (Dimension/ Sizes)	1000.0
9 (Freedom from Defects)	500.0
12.2.2 (Zinc Coating of Point wire)	2000.0

513

National Test House (NWR), Jaipur

IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Sulphur)	500.0
4 (Phosphorus)	500.0
6.2 (Breaking Force of Single Wire)	2000.0
7 (Freedom from defect)	1000.0
8.1 (Wrapping Test of wire)	1000.0
9.1 (Breaking Force of Strand)	3000.0
9.1 (Elongation of Strand)	1000.0
8.1 (Wire Diameter)	1000.0
9.2 (Mass of Zinc Coating)	2000.0

514

National Test House (ER), Kolkata

335 : 2018 - New Insulating Oils — Specification (Fifth Revision)

New Insulating Oils — Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.4 (Breakdown Voltage)	10000.0

515

National Test House (ER), Kolkata

IS 335 (1993) - NEW INSULATING OILS- SPECIFICATION

NEW INSULATING OILS- SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

516

National Test House (ER), Kolkata

1866 : 2000 (2000) - CODE OF PRACTICE FOR ELECTRICAL MAINTENANACE AND SUPERVISION OF MINERAL INSULATING OIL IN EQUIPMENT

CODE OF PRACTICE FOR ELECTRICAL MAINTENANACE AND SUPERVISION OF MINERAL INSULATING OIL IN EQUIPMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Breakdown Voltage)	10000.0

517

National Test House (ER), Kolkata

IS 2911 (2010) - Design and Construction of Pile Foundation - Drilling Mud (Bentonite)

Design and Construction of Pile Foundation - Drilling Mud (Bentonite)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 [D-3 (a)] (Liquid limit)	1000.0
7.4 [D-3 (b)] (Density)	1000.0
7.4 [D-3 (c)] (Marsh Viscosity)	1000.0
7.4 [D-3 (d)] (pH Value)	1000.0

518

National Test House (NWR), Jaipur

Custom specification (NWR)-Misc. - Custom specification (NWR)-Misc.

Custom specification (NWR)-Misc.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Electrical Conductivity (EC))	500.0
2 (pH)	500.0
4 (Total Dissolved Solids (TDS))	500.0
3 (Coliform)	1000.0
5 (Test Result)	3000.0
0 (Mechanical Tests)	5000.0

519

National Test House (WR), Mumbai

Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies - Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies

Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Specific Gravity as per ASTM D 790)	1000.0
- (Hardness as per ASTM D 2240)	1000.0
- (Tensile Strength at yield as per ASTM D 638)	2000.0
- (Flexural Modulus as per ASTM D 790)	2000.0
- (Water absorption at 23(+/-)1deg.C for 24(+1/2, -o)hours)	2000.0

520

National Test House (WR), Mumbai

17908 (2023) - Fibre Cement Sheet - Lightweight Concrete Sandwich Panels

Fibre Cement Sheet - Lightweight Concrete Sandwich Panels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Overall Length, in mm)	1000.0
6.2 (Overall Width, in mm)	1000.0
6.2 (Thickness, in mm)	1000.0
6.2 (Indentation Depth, in mm)	500.0
6.2.1.1 (Straightness of Edge, in mm/m)	1000.0
6.2.1.2 (Squareness of edge, in mm/m)	1000.0
6.3 (Density, in kg/m^3)	1000.0
6.4.1 (Bending Strength (Three Point Loading), N/mm^2))	4000.0
6.4.2 (Bending Strength (Uniformly Distributed Load), in N/m^2)	4000.0
6.5 (i) (Impact Test (Small Hard Body impact - Surface damage),)	1500.0
6.5 (i) (Impact Test (Small hard body impact - Perforations))	1500.0
6.5 (ii) (Impact Test (Large soft body impact), deformation in mm)	1500.0
6.6.2 (Tensile Strength, in N/mm^2)	2000.0
6.6.3 (Screw Withdrawal Strength, in kN)	1500.0

521

National Test House (WR), Mumbai

303 (2024) - Plywood for General Purpose

Plywood for General Purpose

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Length, in mm)	500.0
8.1 (Width, in mm)	500.0
8.2 (Thickness, in mm)	500.0
8.3 (Squareness, in mm/m)	500.0
8.3 (Edge Straightness, in mm/m)	500.0
5 (Classification by Appearance)	1000.0
9 (Workmanship and finish,)	1000.0
11.3.1 (a) (Glue Adhesion - Water Resistance Test)	2000.0
11.3.1 (b) (Glue Adhesion Test - Water Resistance Test - BWR Grade)	2000.0
11.3.1 cb) (Glue Adhesion Test - Water Resistance Test - BWP Grade)	2000.0
11.3.2 (Mycological Test)	1500.0
11.4 (Moisture Content, in %)	1000.0
11.5 (Static Bending Strength (Modulus of Rupture -Along), in N/mm^2)	1000.0
11.5 (Static Bending Strength (Modulus of Rupture - Across), in N/mm^2)	1000.0
11.5 (Static Bending Strength (Modulus of Elasticity-Along), in N/mm^2)	1000.0
11.5 (Static Bending Strength (Modulus of Elasticity- Across), in N/mm^2)	1000.0

522

National Test House (WR), Mumbai

CUS/SR/MECH-55 (2024) - Mechanical Properties of Metal

Mechanical Properties of Metal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions, mm)	2000.0
2.0 (Brinell Hardness, HBW)	2000.0
5.0 (Powder Coating Thickness, micron)	2000.0
6.0 (Tensile strength, N/mm²)	1000.0
7.0 (Yield strength, N/mm²)	1000.0
8.0 (Percentage Elongation, %)	1000.0
9.0 (Weight, kg)	1000.0

523

National Test House (WR), Mumbai

CUS/SR/MECH-8 - Composite Sandwich Shutter

Composite Sandwich Shutter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	3000.0
2.0 (Breaking load)	3000.0

524

National Test House (WR), Mumbai

CUS/SR/MECH-14 - Trek Bottle

Trek Bottle

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Height)	1000.0
2.0 (Weight)	1000.0
3.0 (Capacity)	1000.0
4.0 (Hot water test)	3000.0
5.0 (Cold water test)	3000.0
6.0 (Chemical composition, % by mass)	6000.0

525

National Test House (WR), Mumbai

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2.5 (Relaxation Losses)	50000.0
6.2.4 (Relaxation Losses)	50000.0
6.1 (Nominal Mass)	1500.0
6.1 (Nominal Area )	1000.0
6.1 (Nominal Diameter )	1000.0
6.1 (Nominal Mass of strand - IS 14268: 2022.)	1500.0
6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.)	1000.0
6.1 (Nominal Diameter of strand- IS 14268: 2022.)	1000.0
6.2.3 (Elongation)	1000.0
6.2.2 (0.2% Proof Load)	1000.0
6.2.2 (Breaking Strength)	3000.0
6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.)	3000.0
6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.)	1000.0
4.2 (Length of lay of 9.5 mm strand)	1000.0
4.2 (Length of lay for dia 15.2mm)	500.0
4.5 (Visual observation)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
Table 2 (Cl 6.1, Cl 4.2) (Dimension and Mass)	1000.0
4.5 (Workmanship and Finish)	1000.0
4.1.2 (Chemical composition (Annexure for NABL parameters))	3500.0
4 (Chemical composition (Annexure for non-NABL parameters))	3000.0
Note 1 (Modulus of Elasticity, N/mm2)	1000.0
6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.)	1000.0

526

National Test House (WR), Mumbai

CUS/SR/MECH-27 (2022) - Stainless Steel Kadai

Stainless Steel Kadai

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Thickness)	1000.0
2.0 (Inside diameter)	1000.0

527

National Test House (WR), Mumbai

CUS/SR/MECH-11 - Insulated Tiffin Carrier

Insulated Tiffin Carrier

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Weight)	1000.0
2.0 (Capacity)	1000.0

528

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/022-CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa (2024) - CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa

CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification and Marking)	-
2 (Product Dimension, in mm as per TDS / relevant Product IS specification)	1000.0
3 (Weight in g as per TDS / relevant Product IS specification)	1000.0
4 (Capacity in L, as per TDS / relevant Product IS Specification)	500.0
5 (Workmanship and Finish- Visual Examination as per IS 1660 / relevant product specification of National or International standard Test method specified)	500.0
6 (Non-Stick Coating thickness, in µm as per IS 9730 / IS 6012 or any other relevant International or National standard test method specified)	2000.0
7 (Non-Stick Quality test, (Coating shall permit the test foods to be removed intact & coating surfaces to be wiped clean.) as per IS 1660 or relevant product specification or any other International / National Standard test method)	1000.0
8 (Finish of the coating - Visual Defects Test as per IS 1660 or any other International/national Standard or relevant product specification. Non-stick coatings shall be free from defects visible to naked eye.)	1000.0
9 (Salt-Water Corrosion Test, As per IS 9730 No defects additional to those initially present shall be observed in the coating.)	2000.0
10 (Adhesion Test – Cross hatch Test, As per IS 9730 No complete squares and not more than 5 percent of the total cross hatched area of the coating shall be lifted from the base and wall of the utensil.)	2000.0
11 (Adhesion Test – Peel Test,As per IS 9730 Peeled away coating length shall not be greater than 2 mm.)	2000.0
12 (Abrasion Resistance, As per IS 1660:2009 When the coating surface is rubbed two or three times with emery paper or emery cloth with emery conforming to grit number 180 of IS 715 ( Part 1) using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface.)	500.0
13 (Hardness Test as per IS 1660:2009)	500.0
14 (Test on Handle- Visual Examination as per IS 1660 Handle shall be sufficiently strong to support a mass in the utensil equivalent to three times the mass of the water capacity of the utensil in the position of normal use without visible permanent deformation of the handle or utensil)	500.0
15 (Body Assembly-Visual as per TDS / IS 1660 Stay cool handle fitted to body)	1000.0
16 (Coating Thickness by Microscopic Method as per IS 5523)	2500.0
17 (Material of Utensil as per TDS declaration /IS 21 / IS 1660 / any other relevant product specification specified National or International Standard Test Method)	3500.0
18 (Material of Lid as per TDS Declaration / IS 1660 refered product specification and method / any other relevant product specification specified in the international or National standard)	3500.0

529

National Test House (WR), Mumbai

IS 1660 (2009) - Wrought aluminium utensils - Specification (First Revision)

Wrought aluminium utensils - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimension, mm)	1000.0
8 (Workmanship & finish)	1000.0
7.2 (Test on Handle)	500.0
8.4.1.2 (Finish of the coating)	500.0
8.4.2 (Coating thickness test)	2500.0
8.4.3 (Abrasion resistance test)	500.0
8.4.5 (Hardness test)	500.0
4 (Materials of Lid)	3500.0
4 (Materials of utensil)	3500.0
TDS-1 (Weight)	500.0
8.5 (Non-Stick Unreinforced Plastics Coatings on Domestic Cooking Utensils)	8000.0
8.5 (Coating thickness test as per IS 9730)	2000.0
TDS-2 (Capacity , ml)	500.0

530

National Test House (WR), Mumbai

IS 2074 : 2023 (2023) - READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC CHROME PRIMING ― SPECIFICATION

READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC CHROME PRIMING ― SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Composition)	300.0
5.3 (Compatibility with Thinner)	100.0
5.4 (Freedom from Objectionable Impurities)	100.0
5.5 (Lead Restriction)	100.0
Table 1 (Consistency (Annexure C))	100.0
Table 1 (Viscosity by ford cup No. 4 at 27±2°C ((Part l/Sec 5))	500.0
Table 1 (Mass, in kg/10 l, (Part l/Sec 7))	500.0
Table 1 (Drying time, h, Max: a) Surface dry ((Part 3/Sec 1))	500.0
Table 1 (Drying time, h, Max: a) Hard dry ((Part 3/Sec 1))	500.0
Table 1 (Finish, (IS 101 Part 3/Sec 4))	500.0
Table 1 (Gloss 60°, Max (IS 101 Part 4/ sec 4))	500.0
Table 1 (Fineness of grind, microns, Max (IS 101 Part 3/Sec 5))	500.0
Table 1 (Colour (IS 101 (Part 4/Sec 2)))	500.0
Table 1 (Flexibility and adhesion: a) Bend test with 6.25mm dia mandrel and in type 1 apparatus) (IS 101 (Part 5/Sec 2)))	500.0
Table 1 (Flexibility and adhesion: b) Scratch hardness ( Load 1 000g ) (IS 101 (Part 5/Sec 2)))	500.0
Table 1 (Flash point (IS 101 (Part l/Sec 6)))	500.0
Table 1 (Volume solids, (IS 101 (Part 8/Sec 6)))	1.0
Table 1 (Resistance to humidity under conditions of condensation a) Resistance to humidity, (IS 101 (Part 6/Sec 1)))	499.0
Table 1 (b) Resistance to seawater (applicable for marine paints only), Annexure D)	1000.0
Table 1 (Accelerated storage stability test, Annexure F)	500.0
Table 1 (Keeping properties for 12 Months, (IS 101 (Part 6/Sec 2)))	5000.0
Table 2 (Consistency, Annexure C of IS 2074)	300.0
Table 2 (Hard dry, h, Max (IS 101 (Part 3/Sec 1)))	500.0
Table 2 (Non- volatile vehicle, (IS 101 (Part 8/Sec 2)))	500.0
Table 1 (Wet opacity, (IS 101 (Part 4/ Sec 1)))	500.0
Table 1 (c) Resistance to salt spray, (Annexure E of 2074), (IS 101 (Part 6/Sec 1)))	500.0

531

National Test House (NR), Ghaziabad

IS 1202-2021 (2021) - Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1 (Specific Gravity of Bitumen)	2000.0

532

National Test House (ER), Kolkata

IS 14887 (2014) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Ash Content)	2000.0
4.1.1 (Avg. Breaking Strength and Elongation of fabric after UV exposure)	2000.0
4.1.1 (Elongation at break of fabric, Widthwise)	2000.0
4.1.1 (Elongation at break of fabric, Lengthwise)	2000.0
4.1.1 (Minimum Breaking Strength of bottom seam)	2000.0
4.1.1 (Avg. Breaking Strength of fabric, Widthwise)	2000.0
4.1.1 (Avg. Breaking Strength of fabric, Lengthwise)	2000.0
4.1.1 (Mass of Sack)	1000.0
4.1.1 (Capacity)	2000.0
4.1.1 (Picks/dm)	1000.0
4.1.1 (Ends/dm)	1000.0
4.1.1 (Dimensions, Inside Width)	1000.0
4.1.1 (Dimensions, Inside Length)	1000.0
4.1 (Mass of Bale)	1000.0
4.2 (UV Resistant Test(192 hrs.))	9600.0
4.2 (GSM of Fabrics)	1000.0

533

National Test House (SR), Chennai

IS 1586 : Part 1 (2018) - Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision)

Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

534

National Test House (NR), Ghaziabad

EN 10084 (2008) - CASE HARDENED STEEL

CASE HARDENED STEEL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 3 (Carbon)	1500.0
Table 3 (Silicon)	1500.0
Table 3 (Manganese)	1000.0
Table 3 (Phosphorus)	2000.0
Table 3 (Sulphur)	1000.0
Table 3 (Chromium)	1000.0
Table 3 (Molybdenum)	1000.0
Table 3 (Nickel)	1000.0
CLAUSE- 7.3.1 (Grain Size)	3000.0
Clause 7.3.2.1 (Microscopic Inclusions)	4000.0
Cl 1 Table 1 (Brinell Hardness (HBW))	2000.0

535

National Test House (WR), Mumbai

Customized Specification for ILC of Paper - Customized Specification for ILC of Paper

Customized Specification for ILC of Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash at 900 deg. C as per IS 1060(Part 5/Sec 3))	-
- (ISO Brightness as per IS 1060(part 4/Sec 13))	-
- (Opacity as per IS/ISO 2471)	-

536

National Test House (WR), Mumbai

IBR 1950 (2023) - Qualified Boiler Welder's Certificate

Qualified Boiler Welder's Certificate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IBR 1950 (Welder qualification)	4500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Horizontally Fixed)	3500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Horizontally Fixed)	4500.0
NTH Additional Charges for Testing (Scientist Charges)	5000.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Vertically Fixed)	4500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Vertically Fixed)	3500.0
Chapter XIII (Certification of welder per position of welding on Plate (SMAW/FCAW) (Plate and Electrodes not supplied by NTH))	3000.0
Chapter XIII (Certification of welder on Pipe & Branch Pipe by TIG/GTAW)	9000.0
Chapter XIII (Certification of welder per position of welding on Pipe/Tube by MMAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Pipe by TIG/GTAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Tube by TIG/GTAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Plate (SMAW+TIG / GTAW)(Plate and Electrodes not supplied by NTH))	3500.0

537

National Test House (SR), Chennai

14255 (1995) - Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 sl no 1(a)(i), 10.2 (a) (Tensile Test on phase/ street light conductor)	1000.0
10.1 sl no 1(a)(ii), 10.2 (b) (Wrapping Test on phase/ street light conductor)	500.0
10.1 sl no 1(a)(iii) (Resistance Test on phase/ street light conductor)	2000.0
10.1 sl no 1(b)(i) ,10.2 sl no(c) (Test on messenger conductor Breaking load)	1000.0
10.1 sl no 1(b)(ii), 10.2 (d) (Test on messenger conductor Elongation test)	1500.0
10.1 sl no 1(c)(i),10.2 (g) (Physical test for XLPE insulation Tensile strength and elongation at break)	1500.0
10.1 sl no 1(c)(ii) (Physical test for XLPE insulation Ageing in air oven)	2000.0
10.1 sl no 1(c)(iii),10.2(h) (Physical test for XLPE insulation Hot set test)	2000.0
10.1 sl no 1(c)(iv) (Physical test for XLPE insulation Shrinkage)	1000.0
10.1 sl no 1(c)(v) (Physical test for XLPE insulation Water absorption test)	1000.0
10.1 sl no 1(d)(i) (Physical test for PE insulation Tensile strength and elongation at break)	1500.0
10.1 sl no 1(d)(iv) (Physical test for PE insulation Vicat softening point)	1000.0
10.1 sl no 1(d)(ii) (Physical test for PE insulation Melt flow index)	1000.0
10.1 sl no 1(d)(v) (Physical test for PE insulation Environment stress cracking)	1500.0
10.1 sl no 1(e),10.2(f) (Test for thickness of insulation)	1500.0
10.1 sl no 1(f),10.2(j) (Insulation resistance (Volume Resistivity) test)	1500.0
10.1 sl no 1(g),10.2(k) (High Voltage test)	1500.0
10.2 (e) (Conductor resistance test)	2000.0
Test on 2nd core (Test on 2nd core)	2000.0
Test on 3rd core (Test on 3rd core)	2000.0
Test on 4th core (Test on 4th core)	2000.0
10.1 sl no 1(b)(iii) (Resistance test on messenger conductor)	1000.0

538

National Test House (WR), Mumbai

Customized Specification for Nylon material - Customized Specification for Nylon material

Customized Specification for Nylon material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Specific Gravity as per ASTM D 792)	1000.0
- (Hardness as per ASTM D 2240)	1000.0
- (Tensile Strength at yield as per ASTM D 638)	2000.0
- (Flexural Modulus as per ASTM D 790)	2000.0
- (Water absorption as per ASTM D 570)	2000.0

539

National Test House (WR), Mumbai

Customized specification for ASTM D 638 - Customized specification for ASTM D 638

Customized specification for ASTM D 638

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength and Elongation as per ASTM D 638)	3000.0

540

National Test House (NR), Ghaziabad

Custom-2-NTH-LM - Straining/Intermediate Y arm

Straining/Intermediate Y arm

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Leg Length)	500.0
2 (Thickness)	500.0
3 (General Dimensions)	1000.0
4 (Tensile Strength)	1500.0
5 (Yield Strength)	1500.0
6 (Percentage Elongation)	1000.0
8 (Mass of Zinc coating)	1000.0
9 (Uniformity of coating)	500.0
10 (Powder Coating)	1000.0
7 (Carbon)	500.0
7 (Sulphur)	500.0
7 (Phosphorus)	500.0
7 (Manganese)	500.0
7 (Silicon)	500.0
7 (Carbon equivalent)	500.0
11 (Salt Spray Test for 1440 Hours)	72000.0