| 91 |
National Test House (SR), Chennai
| IS 8041 (1990) - Rapid hardening portland cement - Specific4tion (Second Revision) |
Rapid hardening portland cement - Specific4tion (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Fineness) |
1000.0 |
|
| 6.2 (Soundness-Lechatlier method) |
500.0 |
|
| 6.3 (Setting time Initial) |
250.0 |
|
| 6.3 (Setting time,Final) |
250.0 |
|
| 6.4 (Compressive strength-(24 hours ±30 minutes)) |
2000.0 |
|
| 6.4 (Compressive strength-(72 hours ±1hour)) |
2000.0 |
|
| 5.1,Table 1 (Chemical requirements:) |
4000.0 |
|
|
| 92 |
National Test House (WR), Mumbai
| ASTM / IS - Flooring / Coating Material |
Flooring / Coating Material |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - - (Hardness (on the lines of ASTM D 2240: 2015)) |
1000.0 |
|
| - - (Compressive Strength (on the lines of ASTM D695:2015), Compressive Strength at Failure, MPa) |
2000.0 |
|
| - - (Flammability (On the lines of ASTM D 635: 2014),) |
2000.0 |
|
| - - (Impact Resistance (on the lines of ASTM D 2794),) |
2000.0 |
|
| - - (Taber Abrasion Test (on the lines of ASTM D4060),) |
3000.0 |
|
| - - (Pull off Adhesion against concrete (on the lines of ASTM D 4541)) |
5000.0 |
|
| 3 of IS 2386 (Loose Bulk Density, kg/m^3) |
500.0 |
|
| 3 of IS 2386 (Part 3) (Compacted Bulk Density, kg/m^3) |
500.0 |
|
| 9.5.3 of IS 1727 (Consistency (Flow table method), in mm) |
1000.0 |
|
| 12.5 of IS 1237 (Water Absorption, in %) |
1000.0 |
|
| 12.6 of IS 1237 (Wet Transverse Strength, in N/mm^2) |
2000.0 |
|
| 7 of ASTM D 4541 (Pull off adhesion against concrete after 7 day, MPa) |
5000.0 |
|
| 7 of ASTM D 4541 (Pull off adhesion against concrete after 1 day, MPa) |
5000.0 |
|
| 7 of ASTM D 4541 (Pull off adhesion against concrete after 14 day, MPa) |
5000.0 |
|
| 7 of ASTM D 4541 (Pull off adhesion against concrete after 28 day, MPa) |
5000.0 |
|
|
| 93 |
National Test House (NR), Ghaziabad
| NTH/NR/CUSTO/PAINT - ANTI SKID PAINT |
ANTI SKID PAINT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (SKID RESISTANCE TEST) |
5000.0 |
|
| 2 (Impact resistant test) |
2000.0 |
|
| 3 (Scratch Hardness test) |
2000.0 |
|
| 3 (Water resistant test) |
2000.0 |
|
| 4 (Fire Resistance test for 2 hours at Bunsen burner flame) |
2000.0 |
|
| 5 (Fire Resistance test for 4 hours at Bunsen burner flame) |
4000.0 |
|
|
| 94 |
National Test House (NR), Ghaziabad
| Customised PU Paint/25 - Testing of PU Paint |
Testing of PU Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Skin formation) |
2000.0 |
|
| 2 (Colour) |
2000.0 |
|
| 3 (Solid Content %) |
2000.0 |
|
| 4 (Density,g/ml) |
2000.0 |
|
|
| 95 |
National Test House (NWR), Jaipur
| IS 1664 (2002) - Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision) |
Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.3 (Total ash in moisture free sample) |
500.0 |
|
| 6.3 (Arsenic (as As2O3)) |
1000.0 |
|
| 6.3 (Lead (as Pb)) |
1000.0 |
|
| 6.3 (Acid Insoluble Ash) |
500.0 |
|
| 6.3 (Sulphur) |
1000.0 |
|
| 6.3 (Zinc (as Zn)) |
500.0 |
|
| 6.3 (Cobalt (as Co)) |
1000.0 |
|
| 6.3 (Manganese (as Mn)) |
500.0 |
|
| 6.3 (Copper (as Cu)) |
500.0 |
|
| 6.3 (Iodine (as KI)) |
1000.0 |
|
| 6.3 (Iron Content) |
500.0 |
|
| 6.3 (Salt as NaCl) |
500.0 |
|
| 6.3 (Magnesium) |
500.0 |
|
| 6.3 (Phosphorus) |
500.0 |
|
| 6.3 (Calcium (as Ca)) |
500.0 |
|
| 6.3 (Moisture) |
500.0 |
|
|
| 96 |
National Test House (ER), Alipore
| CUSTOM PAINT ONSITE TESTING-1 (2024) - CUSTOM PAINT ONSITE TESTING-1 |
CUSTOM PAINT ONSITE TESTING-1 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Distinctness of Image (DOI)) |
10000.0 |
|
|
| 97 |
National Test House (ER), Alipore
| MICR Cheque Paper Sensitization to chemicals and UV Light - MICR Cheque Paper Sensitization to chemicals and UV Light |
MICR Cheque Paper Sensitization to chemicals and UV Light |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test for Chemical Sensitization Ethanol) |
450.0 |
|
| 2 (Test for Chemical Sensitization Acetone) |
450.0 |
|
| 3 (Test for Chemical Sensitization Benzene) |
450.0 |
|
| 4 (Test for Chemical Sensitization Chloroform) |
450.0 |
|
| 5 (Test for Chemical Sensitization Ethylene Glycol") |
450.0 |
|
| 6 (Test for Chemical Sensitization Bleaching powder) |
450.0 |
|
| 7 (Test for Chemical Sensitization Ammonia solution 30%) |
450.0 |
|
| 8 (Test for Chemical Sensitization Sodium meta bisulfite solution 10%) |
450.0 |
|
| 9 (Test for Chemical Sensitization Oxalic acid solution 5%) |
450.0 |
|
| 10 (Test for Exposure to UV lamp (for 24 Hours)) |
350.0 |
|
|
| 98 |
National Test House (ER), Alipore
| ASTM B117 SALT SPRAY TEST PAINT LAB (2022) - ASTM B117 SALT SPRAY TEST FOR 96 HOURS |
ASTM B117 SALT SPRAY TEST FOR 96 HOURS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (ASTM B117 SALT SPRAY TEST FOR 96 HOURS) |
5000.0 |
|
|
| 99 |
National Test House (NWR), Jaipur
| IS 1964:2001 (2001) - Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics |
Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Method-A (Grammage of Fabric (GSM)) |
1000.0 |
|
|
| 100 |
National Test House (ER), Alipore
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA ) [501kVA TO 1000 kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.3(b) (Temperature Rise Test) |
35000.0 |
|
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship) |
1500.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
15000.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load)) |
7000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
20000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1500.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
6000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
3000.0 |
|
| 21.4(a) (Determination of sound levels) |
6000.0 |
|
| 21.4( e) (BDV of Oil in the transformer) |
10000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
2500.0 |
|
| As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current) |
12000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
5000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
5000.0 |
|
| N.A. (Unbalance Current) |
5000.0 |
|
|
| 101 |
National Test House (ER), Alipore
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) [201kVA TO 500kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.3(b) (Temperature Rise Test) |
30000.0 |
|
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship) |
1500.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
15000.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load)) |
6000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
15000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1000.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
5500.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
2500.0 |
|
| 21.4(a) (Determination of sound levels) |
6000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
2500.0 |
|
| As per CBIP Manual No. 317 Cl (Harmonics of No-load Current) |
12000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
4000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
4000.0 |
|
| N.A. (Unbalance Current) |
4000.0 |
|
|
| 102 |
National Test House (ER), Alipore
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA ) [1kVA to 200KVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.3(b) (Temperature Rise Test) |
24000.0 |
|
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship) |
1500.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
10000.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load)) |
5000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
10000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1000.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
5500.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
2500.0 |
|
| 21.4(a) (Determination of sound levels) |
5000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
2500.0 |
|
| As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test) |
3000.0 |
|
| As per CBIP Manual No. 317 Cl (Harmonics of No-load Current) |
10000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
3000.0 |
|
| N.A. (Unbalance Current) |
3000.0 |
|
|
| 103 |
National Test House (ER), Alipore
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) [1kVA to 100kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.3(b) (Temperature Rise Test) |
15000.0 |
|
| 21.2(a) (Measurement of Winding Resistance) |
700.0 |
|
| 21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship) |
700.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
6000.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
3500.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
5000.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load)) |
3000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
6500.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
700.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
3000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
1200.0 |
|
| 21.4(a) (Determination of sound levels) |
5000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
1200.0 |
|
| As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test) |
2000.0 |
|
| As per CBIP Manual No. 317 Cl (Harmonics of No-load Current) |
6000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
2000.0 |
|
| N.A. (Unbalance Current) |
2000.0 |
|
|
| 104 |
National Test House (ER), Alipore
| IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Lead Restriction as metallic lead) |
1500.0 |
|
| 4.3 table 1(i) (Drying time a) Hard dry) |
1500.0 |
|
| 4.3 table 1(ii) (Consistency) |
1000.0 |
|
| 4.3 table 1(iii) (Finish) |
500.0 |
|
| 4.3 table 1(iv) (Wet opacity meter square per liter) |
500.0 |
|
| 4.3 table 1(v) (Mass, kg/10 Litres,) |
1000.0 |
|
| 4.3 table 1(vi) (Colour) |
200.0 |
|
| 4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus)) |
1000.0 |
|
| 4.3 table 1(viii) (Stripping test ( By scratch hardness tester)) |
1000.0 |
|
| 4.3 table 1(ix) (Flash point deg.C) |
1000.0 |
|
| 4.3 table 1(x) (Volatile matter content, percent by mass,) |
1000.0 |
|
| 4.3 table 1(xi) (Resistance to humidity under conditions of condensation) |
2000.0 |
|
| 4.3 table 1(xii) (Resistance to water) |
1000.0 |
|
| 4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v)) |
1500.0 |
|
| 4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution)) |
1500.0 |
|
| 4.3 table 1(xv) (Resistance to chlorine
(0.05 percent of chlorine (m/v).) |
1000.0 |
|
| 4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,) |
1500.0 |
|
| 4.3 table 1(xvii) (Keeping properties(12 Months)) |
5000.0 |
|
|
| 105 |
National Test House (ER), Alipore
| IS 158 (2015) - Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision) |
Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3,xvi (Keeping properties) |
500.0 |
|
| 4.3,xv (Flash Point) |
500.0 |
|
| 4.3,xiv (Resistance to heat) |
200.0 |
|
| 4.3,xiii (Resistance to alkali) |
1000.0 |
|
| 4.3,xii (Resistance to acid) |
2000.0 |
|
| 4.3,xi (Volatile matter, percent by mass) |
200.0 |
|
| 4.3,x (Protection against corrosion under conditions of condensation) |
2000.0 |
|
| 4.3, ix (Stripping Test) |
1000.0 |
|
| 4.3, viii (Flexibility and adhesion, bend test with 6.25
mm dia mandrel and type 1 apparatus) |
1000.0 |
|
| 4.3,vii (Water Content,percent by mass) |
100.0 |
|
| 4.3,vi (Mass, kg/10litre) |
100.0 |
|
| 4.3,v (Colour) |
100.0 |
|
| 4.3,iv (Wet opacity) |
500.0 |
|
| 4.3,iii (Finish) |
100.0 |
|
| 4.3,ii (Consistency) |
1000.0 |
|
| 4.3,i (Drying time : Hard dry) |
1000.0 |
|
| 4.2 (Lead Restrictions) |
1500.0 |
|
|
| 106 |
National Test House (ER), Alipore
| IS 5083 (1988) - Specification for knifing stopper (Second Revision) |
Specification for knifing stopper (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.10.ii (Keeping properties) |
5000.0 |
|
| 3.10.i (Water content) |
1200.0 |
|
| 3.9 (Drying T i m e ) |
1200.0 |
|
| 3.7 (Hold Out Properties) |
2000.0 |
|
| 3.6 (Rubbing Properties) |
2000.0 |
|
| 3.5 (Stopping Properties) |
2000.0 |
|
| 3.4 (compatibility) |
1200.0 |
|
| 3.3 (Consistency ) |
1200.0 |
|
| 3.2 (Composition ) |
1200.0 |
|
| 3.1 (Form and Condition) |
1200.0 |
|
|
| 107 |
National Test House (ER), Alipore
| IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision) |
Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.6.xiii (Keeping properties) |
5000.0 |
|
| 6.6.xii (Accelerated storage stability test, at 60 degC, 96 h) |
3000.0 |
|
| 6.6.xi.b (Phthalic anhydride content of
non-volatile vehicle) |
3000.0 |
|
| 6.6.xi.a (Volume solids) |
3000.0 |
|
| 6.6.x (Flash point) |
1500.0 |
|
| 6.6.ix (Flexibility and adhesion) |
1200.0 |
|
| 6.6.viii (Scratch hardness after 48 h air
drying (1 000 g weight)) |
1500.0 |
|
| 6.6.vii (Water content (if suspected to be present) |
1200.0 |
|
| 6.6.vi (Colour) |
1200.0 |
|
| 6.6.v (Fineness of grind,) |
1200.0 |
|
| 6.6.iv.b (Gloss , 60 deg) |
1500.0 |
|
| 6.6.iv.a (Fnish) |
1200.0 |
|
| 6.6.iii.d (Drying time Tack Free) |
1200.0 |
|
| 6.6.iii.c (Hard dry at 70 DegC
with 15 min flash-
off time) |
1200.0 |
|
| 6.6.iii.b (Drying time Hard Dry) |
1200.0 |
|
| 6.6.iii.a (Drying time Surface Dry) |
1200.0 |
|
| 6.6.ii (Mass, in kg/101itres) |
1500.0 |
|
| 6.6.i.b (Viscosity byFord cup No. 4) |
1200.0 |
|
| 6.6.i.a (Consistency) |
1200.0 |
|
| 6.5 (Resistance to Alkali (for Finishing Only) |
1500.0 |
|
| 6.4 (Resistance to Acid (for Finishing Only)) |
1500.0 |
|
| 6.3 (Durability( Normal Outdoor Exposer)) |
10000.0 |
|
| 6.2.6 (Application Properties) |
1200.0 |
|
| 6.2.5 (Thinning Properties) |
1200.0 |
|
| 6.2.4 (Skin Formation) |
1200.0 |
|
| 6.2.3 (Freedom from Coarse Particles) |
1200.0 |
|
| 6.2 (Condition in Container) |
1200.0 |
|
| 6.1 (Composition) |
1200.0 |
|
| CLAUSE-4.5.2,Table-1 (Dry Film Thickness(DFT)) |
1500.0 |
|
| 6.7 (Pigment content) |
1000.0 |
|
| 1 (1) |
- |
|
|
| 108 |
National Test House (ER), Alipore
| IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING |
ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 109 |
National Test House (ER), Alipore
| IS 341 (2016) - Black japan, types a, b and c - Specification (Second Revision) |
Black japan, types a, b and c - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| x) (Keeping properties) |
5000.0 |
|
| ix) (Flash point) |
1200.0 |
|
| viii) (Resistance to heat (for 2 h) (for Type C)) |
1200.0 |
|
| vii) (Resistance to kerosene for Types B and C)) |
1500.0 |
|
| vi) (Stripping test) |
1200.0 |
|
| b) (Scratch hardness (load 1 000g)) |
1500.0 |
|
| a) (Bend test (with 6.25 mm dia mandrel and in type 1 apparatus)) |
1500.0 |
|
| iv) (Ash content percent by mass) |
1200.0 |
|
| iii) (Volatile matter content, percent by mass, Max) |
2000.0 |
|
| ii) (Finish) |
1200.0 |
|
| 5.6 Table i) b) (b) Hard dry) |
1500.0 |
|
| 5.6 Table i) a) (a) surface dry) |
1200.0 |
|
| 5.5 (Durability) |
8000.0 |
|
| 5.4 (Lead Restriction) |
2500.0 |
|
| 5.3 (Reaction with Varnish, Exterior) |
1200.0 |
|
| 5.2 (Reaction with White Paint) |
1000.0 |
|
| 5.1 (Composition) |
2000.0 |
|
|
| 110 |
National Test House (ER), Alipore
| IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision) |
Aluminium paints for general purposes - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 ix (Keeping properties) |
5000.0 |
|
| 5.3viii (Flash point) |
2000.0 |
|
| 5.3 vii (Resistance to humidity under condition of condensation) |
3000.0 |
|
| 5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel) |
200.0 |
|
| 5.3 v (Wet Opacity) |
500.0 |
|
| 5.3 iv (Mass) |
200.0 |
|
| 5.3 iii (Finish) |
200.0 |
|
| 5.3 ii (Consistency) |
200.0 |
|
| 5.3 i (Drying Time Hard dry) |
200.0 |
|
| 5.2 (Lead Resistrction) |
500.0 |
|
| 5.1.1 (Leafing Value) |
1500.0 |
|
| 5.1 (Compostion) |
200.0 |
|
| 5.2 (Lead Restriction) |
500.0 |
|
| Table 1 Cl 3 (Form & Condition) |
1000.0 |
|
| Table 1 Cl 3 (Grease content) |
1500.0 |
|
| Table 1 Cl 3 (Residue on Sieve) |
1000.0 |
|
| Table 1 Cl 3 (Volatile matters) |
500.0 |
|
| Table 1 Cl 3 (Acid Value) |
500.0 |
|
|
| 111 |
National Test House (ER), Alipore
| Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024 |
Customized Specification for Paint Coatings NTH ER 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (PULL OF ADHESION ,MPa
ASTM D4541) |
3500.0 |
|
| 2 (HUMIDITY RESISTANCE FOR 2000 hrs
ASTM D4585) |
100000.0 |
|
| 3 (HUMIDITY RESISTANCE FOR 1000 hrs
ASTM D4585) |
50000.0 |
|
| 4 (SALT SPRAY TEST FOR 2000 hrs
ASTM B 117) |
100000.0 |
|
| 5 (UV RESISTANCE FOR 1000 hrs
(ASTM G 154) |
50000.0 |
|
| 6 (SALT SPRAY TEST FOR 5000 hrs
ASTM B 117) |
250000.0 |
|
| 7 (TENSILE STRENGTH, MPa
ASTM D 638) |
3000.0 |
|
| 8 (ELONGATION %
ASTM D 638) |
1000.0 |
|
| 9 (WATER IMMERSION TEST for 14 days) |
5000.0 |
|
| 11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117) |
125000.0 |
|
| 10 (UV RESISTANCE FOR 500 hrs (ASTM G 154) |
25000.0 |
|
| 12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117) |
50000.0 |
|
| 13 (Dry film Thickness(DFT),in microns) |
100.0 |
|
| 15 (Scratch hardness (at the load of 1000gm)
IS: 101 (part 5 / Sec 1) 1988
(Reaffirmed 2019)) |
1000.0 |
|
| 16 (Adhesion of film
ASTM 3359
(Circular Blade cross cut)
/IS:101.5.2.1988) |
2000.0 |
|
| 17 (Finish
IS:101 (Part 3/ sec 4) 1987
(Reaffirmed 2019)) |
1000.0 |
|
| 18 (Accelerated Weathering
QUV test for 240 hours) |
12000.0 |
|
| 19 (Resistance to petrol benzol mixture
(To pass 500g scratch hardness after the exposure)
jSS-8010-82:2012, Appendix - D) |
2000.0 |
|
| 36 (Abrasion Resistance (ASTM D 4060)
1000g load/CS 17/1000 Cycle) |
4000.0 |
|
| 33 (Outdoor Durability Test 25 days
JSS-8010-82 2012.Annex G) |
20000.0 |
|
| 52 (SALT SPRAY TEST FOR 500 hrs ASTM B 117) |
25000.0 |
|
|
| 112 |
National Test House (ER), Alipore
| Custom Food Grade Epoxy Paint (2024) - Custom Food Grade Epoxy Paint |
Custom Food Grade Epoxy Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Adhesion (Mpa)) |
2500.0 |
|
| 2 (Specific gravity Comp. A & Comp. B) |
2400.0 |
|
| 3 (Pot life) |
1200.0 |
|
| 4 (Solid Content) |
1200.0 |
|
| 5 (Color) |
1200.0 |
|
| 6 (Chemical Resistance
(All Test)) |
7500.0 |
|
| 7 (Drinking Water Performance Test for Heavy metals) |
10000.0 |
|
| 8 (Dry film Thickness per coat (microns)) |
1200.0 |
|
|
| 113 |
National Test House (SR), Chennai
| IS 12436:1988 - Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation |
Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A-2 (Density(as per IS 7888:1976):) |
1000.0 |
|
|
| 114 |
National Test House (ER), Alipore
| MMDTS19041 REV-02 DATE 01.01.2024 - - |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 4 Table 1 Sr No 1 (Drying timeat25±2˚C a. Surface dry, max
IS:101-86 (Part3/Sec.1),
Reaffirmed 2017 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 1 (Drying time at2 5±2˚C b) Curing time
IS:101-86 (Part3/Sec.1),
Reaffirmed 2017 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 2 (Consistency
IS:101-89 (Part1/Sec.5),
Reaffirmed 2019 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 3 (Finish
IS:101-87 (Part 3/Sec.4),
Reaffirmed 2019 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 4 (Colour
IS:101-89 (Part 4/Sec.2),
Reaffirmed 2021 or latest) |
100.0 |
|
| Cl 4 Table 1 Sr No 5 (Dry film thickness per coat,
by Spray
/dipping roller/wipes
IS:101-89 (Part3/Sec.2 )
Reaffirmed 2019 or latest version
ASTM D7091 (latest version)/by DFT gauge) |
250.0 |
|
| Cl 4 Table 1 Sr No 7 (a )Scratch hardness(at1.5 Kg. load)
IS:101-88 (Part5/Sec.2),
Reaffirmed 2014 or Latest Version
b)Pencil Hardness test
ASTM D3363 or Latest Version) |
3500.0 |
|
| Cl 4 Table 1 Sr No 8 (Flexibility & Adhesion (6.25 mm mandrel)
IS:101-88 (Part5/Sec.2),Reaffirmed 2014 or Latest Version) |
250.0 |
|
| Cl 4 Table 1 Sr No 9 (Flash Point deg C
IS: 101-87(Part 1/ Sec.6),Reaffirmed 2019 or latest version) |
250.0 |
|
| Cl 4 Table 1 Sr No 10 (Resistance to salt spray
For 3000 hours
ASTM B-117/2019 or latest version) |
125000.0 |
|
| Cl 4 Table 1 Sr No 11 (Protection against
Corrosion under condition of
Condensation for 2500 hours
IS:101-88(Part6/Sec.1),Reaffirmed 2015 or latest) |
100000.0 |
|
| Cl 4 Table 1 Sr No 13 (Spreading & Covering surface area Capacity, .@ DFT ≥5microns
Appendix-I of RDSO specification no. M&C/ PCN 100/ 2018) |
500.0 |
|
| Cl 4 Table 1 Sr No 14 (Resistance to chemicals For 24 hours
1) 25% caustic soda solution (w/v)
2) 30% (V/V) H2SO4
IS:101-89 (Part7 /Sec.2) RA 2020 or latest) |
2000.0 |
|
| Cl 4 Table 1 Sr No 15 (Mass in kg/ 10litres,
IS:101-87 (Part1/Sec.7)Reaffirmed 2020 or latest) |
500.0 |
|
| Cl 4 Table 1 Sr No 16 (Impact resistance test
height 31 Inch, load 6.45pound (200 Inch pound load
ASTM2794-93 or latest) |
2000.0 |
|
| Cl 4 Table 1 Sr No 17 (Resistance to tap Water or raw water for 3000 hours
IS: 101-90 (Part7/Sec.2)
Reaffirmed- 2005 or latest) |
7500.0 |
|
| Cl 4 Table 1 Sr No 18 (Abrasion Resistance test 1000 cycle with CS-17 wheel & 1 kg load
ASTMD-4060 or latest) |
2500.0 |
|
| Cl 4 Table 1 Sr No 19 (Glossat60 angle of incidence
IS:101-88 (Part 4/ Sec.4)
Reaffirmed-2020 or latest) |
1500.0 |
|
| Cl 4 Table 1 Sr No20 (Anti-graffiti properties
ASTM D-6578/ 13 /(latest version)
Marker:Edding 3000) |
7500.0 |
|
| Cl 4 Table 1 Sr No 21 (Durability Test–
Accelerated weathering test:
QUV 4 hours and 4 hours Condensation alternatively, (750hrs), Temp. 50 O C as per ASTM G154-or latest) |
25000.0 |
|
|
| 115 |
National Test House (ER), Alipore
| RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Chapter V/Cl. 3.2 (Abrasion resistance-1000 cycles) |
3000.0 |
|
| Chapter V/Cl. 3.2 (Humidity test.) |
11000.0 |
|
| Chapter V/Cl. 3.2 (Durability Tests : Accelerated weathering test) |
110000.0 |
|
| Chapter V/Cl. 3.2 (Accelerated Tests Resistance to water) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Accelerated Tests Resistance to solvents) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Accelerated Tests Resistance to oil) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Accelerated Tests Resistance to 20% caustic potash (weight by volume)) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume)) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Gloss at 60 degree angle of incidence) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Fineness of grind) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Theoretical Spreading rate) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Pot life(After induction time)ii) 40 ± 2 Deg C) |
2000.0 |
|
| Chapter V/Cl. 3.2 (Pot life (After induction time) at i) 27 ± 2 Deg C) |
1500.0 |
|
| Chapter V/Cl. 3.2 (Mass in Kg/10 litres) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Keeping Properties for both the packs) |
5000.0 |
|
| Chapter V/Cl. 3.2 (Flash Point (b) Component B) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Flash Point (a) Component A) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Flexibility & Adhesion (6.25mm mandrel)) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Scratch hardness (1.5 Kg LOAD)) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Volume solids) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Dry film thickness/Per coat) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Colour) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Finish) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Consistency) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Drying time c) Hard Dry at 70 Deg C) |
1200.0 |
|
| Chapter V/Cl. 3.2 (Drying time b) Hard Dry) |
1200.0 |
|
| Chapter III/Cl. 2.2.1 (Drying time a) Surface Dry) |
1200.0 |
|
| Chapter II/Cl. 3.2.1.2 (Pigment Content) |
1500.0 |
|
| Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation) |
9000.0 |
|
| Chapter II/Cl. 4.1 (Resistance to salt spray) |
21000.0 |
|
|
| 116 |
National Test House (ER), Alipore
| MMDTS 18034 (Rev. 04) (2019) - Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 ((Anti Graffiti test ASTM D-6578)) |
5000.0 |
|
| 4 (DFT(Dry Film Thickness)) |
1200.0 |
|
| 3 (Chemical Resistance
1)30% H2SO4
2)20% NaOH) |
2000.0 |
|
|
| 117 |
National Test House (WR), Mumbai
| IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Lead Restriction as metallic lead) |
1500.0 |
|
| 4.3 table 1(i) (Drying time a) Hard dry) |
1500.0 |
|
| 4.3 table 1(ii) (Consistency) |
1000.0 |
|
| 4.3 table 1(iii) (Finish) |
500.0 |
|
| 4.3 table 1(iv) (Wet opacity meter square per liter) |
500.0 |
|
| 4.3 table 1(vi) (Colour) |
200.0 |
|
| 4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus)) |
1000.0 |
|
| 4.3 table 1(viii) (Stripping test ( By scratch hardness tester)) |
1000.0 |
|
| 4.3 table 1(ix) (Flash point deg.C) |
1000.0 |
|
| 4.3 table 1(x) (Volatile matter content, percent by mass,) |
1000.0 |
|
| 4.3 table 1(xi) (Resistance to humidity under conditions of condensation) |
2000.0 |
|
| 4.3 table 1(xii) (Resistance to water) |
1000.0 |
|
| 4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v)) |
1500.0 |
|
| 4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution)) |
1500.0 |
|
| 4.3 table 1(xv) (Resistance to chlorine
(0.05 percent of chlorine (m/v).) |
1000.0 |
|
| 4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,) |
1500.0 |
|
| 4.3 table 1(xvii) (Keeping properties(12 Months)) |
5000.0 |
|
|
| 118 |
National Test House (NR), Ghaziabad
| Nitrile Rubber - Nitrile Rubber |
Nitrile Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's requirement (Thickness) |
1000.0 |
|
| Firm's requirment (Density) |
1000.0 |
|
| Firm's requirement (Fire Rating) |
4000.0 |
|
|
| 119 |
National Test House (NR), Ghaziabad
| IS/IEC 62271 : Part 103 (2011) - High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.102.2.1 (Mechanical Endurance Test for Class M1 Switches) |
100000.0 |
|
| 6.2.6.1 of IEC 62271-1 (Power Frequency Voltage Test) |
10000.0 |
|
|
| 120 |
National Test House (NR), Ghaziabad
| IS/IEC 62271 : PART 100 (2008) - High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.101.1, 7.101.2.1, 7.101.2.2, 7.101.2.3 (Circuit Breaker Endurance Test for Class M2 10000 Operations) |
100000.0 |
|
|
