NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1171

National Test House (ER), Kolkata

CPWD--Specification for Flood light Fitting - CPWD--Specification for Flood light Fitting

CPWD--Specification for Flood light Fitting

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Insulation Resistance (IS 10322 Part 5 Sec 5: 2013))	2000.0
A.2 (Electric Strength (IS 10322 Part 5 Sec 5: 2013))	3000.0
A.3 (Resistance to ingress of solid particle (IS 10322: Part 5: Sec 5: 2013))	6000.0
A.4 (Resistance to Ingress of water (Moisture) (S 10322: Part 5: Sec 5: 2013))	6000.0
A.5 (Endurance Test and Thermal test ((IS 10322: Part 5: Sec 5: 2013))	5500.0
A.6 (Moisture (Humidity) Resistance Test (IS 16103 : Part 1 : 2012))	2000.0
A.7 (Insulation Resistance after Moisture Resistance test (IS 16103: Part 1: 2012))	2000.0
A.8 (Electrical Parameters – Input power, Current, Voltage, and power factor (IS 16106; 2012))	4000.0
A.9 (Electrical Parameters – Output Current, output Voltage, and Total Circuit Power (IS 16104; 2012))	3000.0
A.10 (Surge Test up to 10kV (IEC 61000-4-5))	10000.0
A.11 (High Voltage Test ( IS 15885-Part 1: 2011))	3000.0
A.12 (Drop Test (Mechanical Impact Test –IK08 as per IS 17050-2023))	1.0
A.13 (Vibration (Sinusoidal) Test along 3 axis (IS 9000: Part 8: 1981))	15000.0
A.14 (Scratch Test (L 3 of IS 101 Part 5 Sec 2))	1500.0
A.16 (Photometry Test (IS 10322: Part 5: Sec 5: 2013))	10000.0

1172

National Test House (WR), Mumbai

15388 (2003) - Silica Fume Specification (Custom requirements)

Silica Fume Specification (Custom requirements)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4, Table 1(i) (Silica SiO2 (IS 1727), percent by mass)	2000.0
4, Table 1(ii) (Moisture Content, percent by mass)	800.0
4, Table 1(iii) (Loss on ignition (IS 1727), percent by mass)	1000.0
4, Table 1(iv) (Alkalies as Na2O, (IS 4032), percent)	1000.0
5, Table 2(ii) (Oversize particle retained on 45 micron IS sieve (IS 1727), percent)	1000.0
5, Table 2(iv) (Compressive Strength at 7 days as per cent of control sample (IS 1727), %)	3000.0
- - (Bulk Density [IS 2386 (Part 3)], g/cc)	1000.0
- - (Specific Gravity [IS 2386(Part 3)])	1000.0
56 (Ferric Oxide [IS 1727 ], %)	1000.0
5.7 of IS 1727 (Alumina [IS 1727 ], %)	1000.0
5.8 (Calcium Oxide [IS 1727 ], %)	1000.0
5.9 (Magnesia [IS 1727], %)	1000.0
5.10 (Sulphuric Anhydride [IS 1727], %)	1000.0
2.4 (Particle size [Sieve Analysis (IS 2386 Part 1)], Percentage passing.)	2000.0

1173

National Test House (ER), Kolkata

IS 7369 (1983) - Specification for wheels and castors (First Revision)

Specification for wheels and castors (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.0 (Dimensions of Wheel)	2000.0
3.0 (Identification of material)	3000.0
6.0 (Load test)	5000.0

1174

National Test House (NR), Ghaziabad

IS 13498- 2017 (2017) - BATHING BAR SPECIFICATION (for NR)

BATHING BAR SPECIFICATION (for NR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 5.1, 7.3 and 8.1, Table 1 (Please see the annexure.)	10000.0

1175

National Test House (NR), Ghaziabad

IS 7884 (2023) - Shampoo - Specification

Shampoo - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CL-3.4, Table 1 (Please see Annexure.)	8000.0

1176

National Test House (NR), Ghaziabad

IS 13114 (1991) - forged brass gate, globe and check valves for water works purposes

forged brass gate, globe and check valves for water works purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimensions)	1000.0
9.2 (Materials)	2000.0
9.3 (Shell Test (Hydrostatic Test))	2500.0
9.3 (Seat & Backseat Test (Hydrostatic Test))	2500.0

1177

National Test House (NR), Ghaziabad

IS 13095 (2020) - Butterfly Valves for General Purposes ( First Revision )

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Face to Face Dimensions)	1000.0
17.2 (Hydrostatic Test of Body)	2500.0
17.3 (Hydrostatic Test of Seat)	2500.0
15 (Materials)	2000.0
17.4 (Hydrostatic Test of Disc Strength)	2500.0
17.1 (Performance Test)	5000.0

1178

National Test House (NWR), Jaipur

CUSTOM-PI for IS 8042 (2015) - Performance Improver for white cement

Performance Improver for white cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (a) of IS 8042 (CaO + MgO, %)	3000.0
4.1 (b) of IS 8042 (Whiteness, %)	1000.0

1179

National Test House (NER), Guwahati

IS:16353-2015 -CLINKER - PORTLAND CEMENT CLINKER

PORTLAND CEMENT CLINKER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 Cl 5 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	1000.0
Table 1 Cl 5 (Ratio of percentage of Alumina to that of Iron Oxide)	1000.0
Table 1 Cl 5 (Total sulphur content calculated as sulphuric anhydride (SO3))	500.0
Table 1 Cl 5 (Free lime, percent by mass,)	1500.0
Table 1 Cl 5 (Chloride content, percent by mass,)	200.0
Table 1 Cl 5 (Magnesia (as MgO), percent by mass)	1500.0
Table 1 Cl 5 (Insoluble residue, percent by mass)	500.0
Table 1 Cl 5 (Total loss on ignition , Percent by mass)	500.0
Table 1 Cl 5 (Alkali content (as Na2O), percent by mass)	500.0

1180

National Test House (ER), Kolkata

Custom/Shoe (2023) - Custom/Shoe

Custom/Shoe

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Tensile Strength)	-
2.0 (Elongation at break)	-
3.0 (Compression Set)	-
4.0 (Hardness, IRHD)	-
5.0 (Ross Flex Test)	2000.0

1181

National Test House (SR), Chennai

CSD Standard for Agarbatti (2023) - Agarbatti sample with CSD Index

Agarbatti sample with CSD Index

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension, inches)	1000.0
2 (Colour)	1000.0
3 (Visual inspection)	1000.0
4 (Uniformity of coating)	1000.0
5 (Fragrance)	1000.0
6 (Size of the stick)	1000.0
7 (Burning quality)	1000.0
8 (Burning time, minutes)	1000.0

1182

National Test House (ER), Kolkata

Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore

Customer Specification NTH ER Electrical Alipore

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Customer Specification NTH ER Electrical Alipore)	5000.0
2 (Customer Specification NTH ER Electrical Alipore)	10000.0
3 (Customer Specification NTH ER Electrical Alipore)	15000.0
4 (Customer Specification NTH ER Electrical Alipore)	20000.0
5 (Customer Specification NTH ER Electrical Alipore)	25000.0
6 (Customer Specification NTH ER Electrical Alipore)	30000.0
7 (Customer Specification NTH ER Electrical Alipore)	35000.0
8 (Customer Specification NTH ER Electrical Alipore)	40000.0
9 (Customer Specification NTH ER Electrical Alipore)	45000.0
10 (Customer Specification NTH ER Electrical Alipore)	50000.0
11 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	55000.0
12 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	60000.0
13 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	65000.0
14 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	70000.0
15 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	75000.0
16 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	80000.0
17 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	85000.0
18 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	90000.0
19 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	95000.0
20 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	100000.0
21 (Customer Specification NTH ER Electrical Alipore)	110000.0
22 (Customer Specification NTH ER Electrical Alipore)	120000.0
23 (Customer Specification NTH ER Electrical Alipore)	130000.0
24 (Customer Specification NTH ER Electrical Alipore)	140000.0
25 (Customer Specification NTH ER Electrical Alipore)	150000.0
26 (Customer Specification NTH ER Electrical Alipore)	160000.0
27 (Customer Specification NTH ER Electrical Alipore)	170000.0
28 (Customer Specification NTH ER Electrical Alipore)	180000.0
29 (Customer Specification NTH ER Electrical Alipore)	190000.0
30 (Customer Specification NTH ER Electrical Alipore)	200000.0

1183

National Test House (ER), Kolkata

FCO 1985 NANO FERTILISER - The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024)

The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Schedule VII Clause 20 D(1) (As per Annexure (Attached)-NON NABL)	10000.0

1184

National Test House (ER), Kolkata

CUSTOM-31-ER-MCALI - Calibration of Inductive Probe

Calibration of Inductive Probe

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	3000.0

1185

National Test House (ER), Kolkata

CUSTOM-30-ER-MCALI - Calibration of Rudder Template

Calibration of Rudder Template

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Angle)	5000.0

1186

National Test House (NER), Guwahati

FCO 1985 NANO FERTILISER - The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024)

The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1187

National Test House (NR), Ghaziabad

IS 1065 : Part 1 (2019) - Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Available Chlorine)	2500.0

1188

National Test House (WR), Mumbai

Customer Specified - Specification

Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1189

National Test House (NER), Guwahati

1489_1 (BIS _NTH_NER) (2015) - Portland Pozzolana Cement - Specification: Part 1 Fly Ash Based

Portland Pozzolana Cement - Specification: Part 1 Fly Ash Based

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 Table 1_1 (Insoluble residue (IS 4032 : 1985), percent by mass)	1000.0
6 Table 1_2 (Magnesia (IS 4032: 1985), Percent by mass)	600.0
6 Table 1_3 (Total Sulphur Content calculated as sulphuric anhydride (SO3) ( IS 4032:1985), percent by mass)	800.0
6 Table 1_4 (Loss on Ignition (IS 4032 : 1985), percent by mass)	800.0
6 Table 1_5 (Chloride Content (IS 4032 : 1985), percent by mass)	800.0
6 Table 1_6 (Alkali content (IS 4032: 1985), percent by mass)	1000.0
7 Table 2_1 (Fineness [ IS 4031 (Part 2):1999], m^2/kg)	750.0
7 Table 2_2 (Soundness by Le-Chatelier method [IS 4031 (Part 3):1988], in mm)	500.0
7 Table 2_2 (Soundness by Autoclave method [IS 4031 (Part 3):1988], in percent)	1000.0
7 Table 2_3 (Setting Time, Initial [IS 4031 (Part 5) : 1988], in minutes)	250.0
7 Table 2_3 (Setting Time, Final [IS 4031 (Part 5) : 1988], in minutes)	250.0
7 Table 2_4 (Compressive Strength - 3 days (72 +/-1 hr), [IS 4031 (Part 6): 1988], MPa)	800.0
7 Table 2_4 (Compressive Strength - 7 days (168 +/-2 hr), [IS 4031 (Part 6): 1988], MPa)	800.0
7 Table 2_4 (Compressive Strength - 28 days (672 +/-4 hr), [IS 4031 (Part 6): 1988], MPa)	800.0
7 Table 2_6 (Drying Shrinkage [IS 4031 (Part 10):1988], in percent)	800.0

1190

National Test House (WR), Mumbai

Custom-23-ER-LM - FLEXIBLE COPPER WIRE

FLEXIBLE COPPER WIRE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Diameter of Wire)	1000.0
2 (Thickness of Wire)	1000.0
3 (Tensile Strength of Wire)	3000.0

1191

National Test House (NER), Guwahati

269_(BIS_NTH_NER) (2015) - Ordinary Portland Cement - Specification

Ordinary Portland Cement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 Table 1_1 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide (IS 4032:1985))	1000.0
6 Table 2_2 (Ratio of percentage of alumina to that of iron oxide (IS 4032 : 1985))	1000.0
6 Table 2_3 (Insoluble residue (IS 4032 : 1985), in percent)	600.0
6 Table 2_4 (Magnesia (IS 4032 : 1985), percent by mass)	600.0
6 Table 2_5 (Total sulphur content calculated as sulphuric anhydride (SO3) [IS 4932 : 1985], in percent by mass)	600.0
6 Table 2_6 (Loss on ignition (IS 4032 : 1985), in percent by mass)	600.0
6 Table 2_7 (Chloride Content (IS 4032 : 1985), in percent by mass)	600.0
6 Table 2_8 (Alkali content (IS 4032 : 1985), percent)	2000.0
7 Table 3_1 (Fineness [IS 4031 (Part 1): 1999], in m^2/kg)	1000.0
7 Table 3_2 (Soundness by Le Chatelier method [IS 4031 (Part 1): 1988], in mm)	1000.0
7 Table 3_2 (Soundness by Autoclave method [IS 4031 (Part 1): 1988], in percent)	1000.0
7 Table 3_3 (Setting Time - Initial [IS 4032 (Part 5) : 1988], in minutes)	500.0
7 Table 3_3 (Setting Time - Final [IS 4032 (Part 5) : 1988], in minutes)	500.0
7 Table 3_4 (Compressive Strength - 3 days (72 +/- 1 h) [ IS 4031 (Part 6) : 1988], in MPa)	1000.0
7 Table 3_4 (Compressive Strength - 7 days (168 +/- 2 h) [ IS 4031 (Part 6) : 1988], in MPa)	1000.0
7 Table 3_4 (Compressive Strength - 28 days (672 +/- 4 h) [ IS 4031 (Part 6) : 1988], in MPa)	1000.0

1192

National Test House (WR), Mumbai

1489_1 (BIS _NTH_NER) (2015) - Portland Pozzolana Cement - Specification: Part 1 Fly Ash Based

Portland Pozzolana Cement - Specification: Part 1 Fly Ash Based

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1193

National Test House (NR), Ghaziabad

IS 13213 (2018) - Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible Tests))	60000.0
Cl 1 Table 1 (Please see Annexure Durability ( Outdoor exposure only) + Keeping properties)	30000.0

1194

National Test House (NR), Ghaziabad

IS 14946 (2001) - Zinc ethyl silicate primer, two components - Specification

Zinc ethyl silicate primer, two components - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible tests))	90000.0
Cl 1 Table 1 (Please see Annexure for Salt spray & Protection against corrosion test)	70000.0

1195

National Test House (NR), Ghaziabad

IS 13213 (2018) - Polyurethane Full Gloss Enamel (Two Pack) — Specification

Polyurethane Full Gloss Enamel (Two Pack) — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Polyurethane Full Gloss Enamel (Two Pack) — Specification (Please refer annexure for tests result)	46000.0

1196

National Test House (ER), Kolkata

MDTS-153 Rev –Nil dated 04.01.2005 (2005) - MDTS-153 Schedule for technical requirements of Adhesive compound for fixing Bonded mineral wool/Glass wool Rail Coach Factory Kapurthala

MDTS-153 Schedule for technical requirements of Adhesive compound for fixing Bonded mineral wool/Glass wool Rail Coach Factory Kapurthala

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1 (2.1 Form and Condition)	500.0
2.2 (2.2 Consistency)	500.0
2.3 (2.3 Viscosity by ford cup No 4 in seconds)	1500.0
2.4 (2.4 Mass in Kg/10 litres)	1500.0
2.5 (2.5 Drying time in hours a) Initial set)	1000.0
2.5 (2.5 Drying time in hours b)optimal set)	1000.0
2.6 (2.6 PH of the emulsion)	1000.0
2.7 (2.7 Softening point of the solids by R&B method)	1500.0
2.8 (2.8 Solubility of the solids % a)In benzene)	1500.0
2.8 (Solubility of the solids % b) In Carbon disulphide)	1500.0
3.0 (Composition a) Total Non –Volatile matter(solids) %)	1500.0
3.0 (Composition b) Water Content %)	1500.0
3.0 (Composition c)Ash Content%)	1500.0
4.1 (4.0 Performance requirements 4.1 Jolting Test: (For 100 Hrs when the thermal insulation pasted to M S panel Size 300X300 cm is allowed to Fall from a height of 5 cm every seconds .If insulation wool disintegrates during testing, compressed blocks of suitable thickness and density, made of smiler material ,may be used for this test)	25000.0
4.2 (4.2 Coverage(meter square per litre) with viscosity range 130-160 seconds and Dry film thickness of 120 microns)	2500.0

1197

National Test House (ER), Kolkata

CUSTOM-29-ER-MCALI - Calibration of Force Calibration Machine

Calibration of Force Calibration Machine

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	10000.0

1198

National Test House (ER), Kolkata

CUSTOM-28-ER-MCALI - Calibration of Eyepiece Reticle

Calibration of Eyepiece Reticle

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	3000.0

1199

National Test House (WR), Mumbai

IS 7328:2020 (2020) - Specification for Polyethylene Material for Moulding and Extrusion

Specification for Polyethylene Material for Moulding and Extrusion

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Density)	2000.0
- (Melt Flow Rate)	2000.0

1200

National Test House (WR), Mumbai

Custom for IS:7328 - Custom for IS:7328

Custom for IS:7328

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found