| 1561 |
National Test House (ER), Kolkata
| M&C/ PCN/ 127 /2020 (Rev 2.0 ) Dated Sep 2020 (2020) - RDSO Specification for Anti-Graffiti Clear coat for the exterior painting of Railway coaches, Diesel & Electric locomotives” |
RDSO Specification for Anti-Graffiti Clear coat for the exterior painting of Railway coaches, Diesel & Electric locomotives” |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drying Time at (27± 2)˚C , i)Surface Dry/Touch Dry
As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017) |
400.0 |
|
| 1 (Drying Time at (27± 2)˚C ii)Hard Dry As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017) |
400.0 |
|
| 1 (Drying Time at (27± 2)˚C iii) Recoating Time
As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017) |
400.0 |
|
| 2 (Finish (IS 101 (Part 3/Sec 4): 1987) |
400.0 |
|
| 3 (Gloss at 60˚
IS : 101-88 (Part 4/Sec-4),) |
1200.0 |
|
| 4 (Flexibility & Adhesion
(By Mandrel size 6.25 mm)
IS : 101-88 (Part -5/Sec-2),) |
1200.0 |
|
| 5 (Impact Resistance test at Height 100cm (39.37 inch) and weight 2.0 Kg (4.409 pound) on 0.50 mm thick cured panel. ASTM-D-2794) |
1500.0 |
|
| 6 (Adhesion Test ( Cross Cut Tape Test) ASTM-D-3359) |
1200.0 |
|
| 7 (Consistency/Efflux Time at (27± 2)˚C
IS : 101-89 (Part -1 Sec-5),) |
1500.0 |
|
| 8 (Protection against corrosion under conditions of condensation (500 hrs)
IS: 101-88 (Part- 6 /Sec- 1),) |
15000.0 |
|
| 9 (Solvent MEK Rub Test 100 DS ASTM D-5402) |
1500.0 |
|
| 10(a) (ACCELERATED TESTS
Resistance to 30 % ,w/v (a)Citric acid for 3 Hours
appendix III) |
1000.0 |
|
| 10(b) (ACCELERATED TESTS (b) Resistance to 5% ,v/v Ammonia for 20 Minutes
appendix III) |
1000.0 |
|
| 10(c) (ACCELERATED TESTS (c) Resistance to Lubricating oil for 24 Hours
appendix III) |
1000.0 |
|
| 10(d) i (ACCELERATED TESTS (d) Resistance to Solvents for 20 Minutes
(i)Acetone appendix III) |
1000.0 |
|
| 10(d) ii (ACCELERATED TESTS
d) Resistance to Solvents for 20 Minutes
(ii) Toluene appendix III) |
1000.0 |
|
| 11 (Mass in Kg/10 litres (IS : 101-87 (Part -1/ Sec7),Reaffirmed 2019)) |
1000.0 |
|
| 12 (Flash Point deg.C
(IS: 101-87 (Part- 1/ Sec6),Reaffirmed 2019)) |
1000.0 |
|
| 13 (Keeping Property/Shelf Life for 1 year) |
10000.0 |
|
| 14 (Anti Graffiti test ASTM D-6578) |
5000.0 |
|
| 15 (Identification of Base Material/Resin By FTIR METHOD) |
4000.0 |
|
| 16 (Coverage ( Spreading Capacity) , Min. , at 1-4 microns DFT, By Spray, Dipping, Roller, Wiping method
appendix-I) |
1200.0 |
|
| 17 (Dry Film Thickness per coat in micron, by Wipe/Spray
APPENDIX-I) |
1000.0 |
|
| 18 (Pencil Hardness ASTM –D- 3363) |
1500.0 |
|
| 19 (Volume Solid,%
APPENDIX-I) |
2000.0 |
|
| 20 i (Durability Tests :
Accelerated Weathering by (Fluorescent UV-Condensation Type for 750 Hours
ASTM-G-154 (APPENDIX-IV)
Cycle 4 Hrs. U.V. Light from UV-B lamps with a peak emission @ 313 nm. and 4 Hours Condensation alternatively, temp. 50 ˚C) |
45000.0 |
|
| 20 ii (Durability Tests :
Accelerated Weathering by Xenon Arc for 2000hours
DIN- 53387 Superseded by
DIN EN ISO 4892-2) |
120000.0 |
|
|
| 1562 |
National Test House (SR), Chennai
| IRS-GE-1 (2016) - Specifications for Track ballast (IRS-GE-1) |
Specifications for Track ballast (IRS-GE-1) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.2.1 (Aggregate abrasion Value (IS 2386(IV):1963)) |
2500.0 |
|
| 2.2.2 (Aggregate Impact Value (IS 2386(Part IV):1963)) |
2500.0 |
|
| 2.2.3 (Water absorption ( IS 2386 (III):1963)) |
1000.0 |
|
| 2.3 (Size and Gradation (as per annexure IV of IRS-GE-1,June 2016)) |
2000.0 |
|
|
| 1563 |
National Test House (SR), Chennai
| IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST |
SPECIFICATIONS FOR TRACK BALLAST |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.3 (Size and Gradation (IRS-GE-I, JUNE-2016)) |
2000.0 |
|
| 2.2.3 (Water absorption (IS 2386 (Part III):1963)) |
1000.0 |
|
| 2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
| 2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
| - (Elongation Index : {as per IS 2386 (1)}) |
1500.0 |
|
|
| 1564 |
National Test House (WR), Mumbai
| Customer specification - Flame retardant test for 4 hours |
Flame retardant test for 4 hours |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 27600 (FLAME RETARDANT TEST FOR 4 Hrs.) |
3000.0 |
|
|
| 1565 |
National Test House (ER), Kolkata
| FCO 1985 (Annexure) - FCO-1985 (Annexure) |
FCO-1985 (Annexure) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1 to 3 test parameters) |
2000.0 |
|
| 2 (4 to 6 parameters (Vide Annexure)) |
4000.0 |
|
| 3 (7 or more parameters (Vide annexure)) |
7000.0 |
|
|
| 1566 |
National Test House (WR), Mumbai
| ASTM D2240 (2015) - Standard Test Method for Rubber Property—Durometer Hardness |
Standard Test Method for Rubber Property—Durometer Hardness |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1567 |
National Test House (NR), Ghaziabad
| BS 1474 (1987) - Specification for Wrought aluminium, and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections |
Specification for Wrought aluminium, and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Tensile strength, N/mm2) |
1000.0 |
|
| 4 (Chemical composition, % by mass) |
5000.0 |
|
| 6 (Percent Elongation) |
1000.0 |
|
| 7 (Dimensions, mm) |
1000.0 |
|
| 0 (Anodic Coating) |
2000.0 |
|
| 6 (0.2% Proof Stress, N/mm2) |
1000.0 |
|
|
| 1568 |
National Test House (ER), Kolkata
| BS EN 14901-1:2014+A1:2019 (Nov 2019) - Ductile Iron Pipes ,Fittings and Accessories
Requirements and Test Methods for Organic Coatings of Ductile Iron Fittings and Accessories
Part-1 Epoxy Coatings(Heavy duty) |
Ductile Iron Pipes ,Fittings and Accessories
Requirements and Test Methods for Organic Coatings of Ductile Iron Fittings and Accessories
Part-1 Epoxy Coatings(Heavy duty) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1.Heat ageing resistance in air (Annexure A Table A.1) Durability: Cl 7.2.5.1
(Test condition: stored in Hot air oven at 110(+/-2)Deg C for 30 Days
& Tested for Non Porosity as read in cl No 7.2.4)) |
7500.0 |
|
| 2 (Heat ageing resistance in air (Annexure A Table A.1) Durability: Cl 7.2.5.1
(Test condition: stored in Hot air oven at 110(+/-2)Deg C for 60 Days& Tested for Non Porosity as read in cl No 7.2.4)) |
7500.0 |
|
| 3 (Heat ageing resistance in air (Annexure A Table A.1) Durability: Cl 7.2.5.1
(Test condition: stored in Hot air oven at 110(+/-2)Deg C for 90 Days & Tested for Non Porosity as read in cl No 7.2.4)) |
7500.0 |
|
| 4 (Heat aging resistance in Water
Test Condition :Immersion in deionized Water at 70 (+/-2)Deg for 07 Days followed by adhesion test)
Adhesion in MPa) |
5000.0 |
|
| 5 (.Chemical Resistance for Coatings in swear Applications
a) Sulphuric Acid at PH-3(EN 598 as read in Cl No 7.9.2 ) at 18 (+/-2)Deg C
Test Duration 06 months) |
10000.0 |
|
| 6 (Chemical Resistance for Coatings in swear Applications b) Sodium Hydroxide at PH-13(EN 598 r as read in Cl No 7.9.2 ) (+/-2)Deg C Test Duration 06 months) |
10000.0 |
|
| 7 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
i) pH) |
1000.0 |
|
| 8 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
.ii) Turbidity (NTU)) |
1000.0 |
|
| 9 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
iii) Total Hardness (asCaCO3), mg/l) |
1000.0 |
|
| 11 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
iv) Chloride (Cl) mg/l) |
1000.0 |
|
| 12 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
v) Nitrate (as NO3), mg/l) |
1000.0 |
|
| 13 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
Vi) Iron (as Fe), mg/l) |
1000.0 |
|
| 10 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
vii) Arsenic (as As), mg/l) |
1000.0 |
|
| 14 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
viii) Fluoride (as F), mg/l) |
1000.0 |
|
| 15 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
ix)Cadmium ), mg/l) |
1000.0 |
|
| 16 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
X Chromium ), mg/l) |
1000.0 |
|
| 17 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
xi)Mercury ), mg/l) |
1000.0 |
|
| 18 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
xii Lead ), mg/l) |
1000.0 |
|
| 20 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
ix) Total Coliform
(CFU/100 ml)) |
1500.0 |
|
| 19 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
x) Faecal Streptococc CFU/100 ml)) |
1500.0 |
|
| 21 (4. Material in contact with potable water
Leaching of Metals µ organisms from the product into Water after water Kept in contact for 30 Days
xi) Odour &Taste) |
2000.0 |
|
| additional parameter 1 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
a) odour &Flovour:
b) odour &Flovour:) |
5000.0 |
|
| additional parameter 2 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
a)TDS
b)TDS) |
2000.0 |
|
| additional parameter 3 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a)Chromium (as Cr)
b) Chromium (as Cr)) |
2000.0 |
|
| additional parameter 4 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a) Manganese(as Mn)
b)Manganese(as Mn)) |
2000.0 |
|
| additional parameter 6 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a)Cobalt(as CO)
b)Cobalt(as CO)) |
2000.0 |
|
| additional parameter 7 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
d) Nickel(as Ni)
d) Nickel(as Ni)) |
2000.0 |
|
| additional parameter7 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a) Arsenic (as As)
b)Arsenic (as As)) |
3000.0 |
|
| additional parameter 8 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a)Cadmium (as Cd)
b)Cadmium (as Cd)) |
3000.0 |
|
| additional parameter 10 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a)Mercury(as Hg)
b)Mercury(as Hg)) |
3000.0 |
|
| additional parameter11 (Test Details:
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Materials in contact with water intended for Human Consumption
a)one sample stored at 23(+/-)2 Deg C & b) another sample at60(+/-)2 Deg C for 24 Hours
Leaching of Heavy Metals in ppm
a)Lead(as Pb)
b)Lead(as Pb)) |
2500.0 |
|
|
| 1569 |
National Test House (NR), Ghaziabad
| NTH/NR/CHEM/CUSTOM/PU PRIMER & TOP COAT - SURFACE PU PRIMER & TOP COAT |
SURFACE PU PRIMER & TOP COAT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (PU Based Floor Coating PRIMER (Please see Annexure)) |
8000.0 |
|
| Table 1 (PU PRIMER TOP COAT ( Please see Annexure)) |
8000.0 |
|
|
| 1570 |
National Test House (NR), Ghaziabad
| NTH/NR/CHEM/CUSTOM/CONDENSER CHILLEDWATER - CONDENSER AND CHILLED WATER AS PER CUSTOMER REQUIREMENT |
CONDENSER AND CHILLED WATER AS PER CUSTOMER REQUIREMENT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (chilled water (Please see Annexure0) |
7000.0 |
|
| Table 1 (CONDENSER WATER ( Please see Annexure)) |
7000.0 |
|
|
| 1571 |
National Test House (ER), Kolkata
| CUSTOM/TEXTILE/2023 (2023) - CUSTOM/TEXTILE/2023 |
CUSTOM/TEXTILE/2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Blend Composition) |
2000.0 |
|
| 2.0 (Tensile Strength) |
2000.0 |
|
| 3.0 (Elongation , Weft) |
1000.0 |
|
| 4.0 (Tensile Strength, Weft) |
2500.0 |
|
|
| 1572 |
National Test House (NER), Guwahati
| IS 3589 (2001) - Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.1 (Carbon) |
500.0 |
|
| 8.1 (Manganese) |
1000.0 |
|
| 8.1 (Sulphur) |
500.0 |
|
| 8.1 (Phosphorus) |
500.0 |
|
| 8 (Chemical composition) |
5000.0 |
|
| 11 (Dimension (Diameter)) |
1000.0 |
|
| 11 (Thickness, mm) |
1000.0 |
|
| 11 (Weight) |
1000.0 |
|
| 9.1 (Yield Strength) |
1000.0 |
|
| 9.1 (Tensile Strength) |
1000.0 |
|
| 9.1 (Elongation) |
1000.0 |
|
| 9.2 (Flattening test) |
1000.0 |
|
|
| 1573 |
National Test House (WR), Mumbai
| Custom CC Tiles, NTH(WR) - Cement Based Tiles - Terrazo |
Cement Based Tiles - Terrazo |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 & 8.1 of IS 1237 (Dimension & Tolerances (On the lines of IS 1237), in mm) |
500.0 |
|
| 7 & 8.1 of IS 1237 (Thickness and Thickness of wearing layer (on the lines of IS 1237), in mm) |
500.0 |
|
| 12.2 of IS 1237 (Flatness of tiles (on lines of IS 1237 cl. 12.2), in %) |
500.0 |
|
| 12.3 of IS 1237 (Perpendicularity of tiles (on lines of IS 1237 cl. 12.3), in %) |
500.0 |
|
| 12.4 of IS 1237 (Straightness of tiles (on lines of IS 1237 cl. 12.4), in %) |
500.0 |
|
| 12.5 of IS 1237 (Water Absorption (On lines of IS 1237 Cl. 12.5), in %) |
1000.0 |
|
| 12.6 of IS 1237 (Wet Transverse Strength (On lines of IS 1237 Cl. 12.6), in %) |
2000.0 |
|
| 12.7 of IS 1237 (Resistance to Wear (on the lines of IS 1237 Cl 12.7), in mm) |
2000.0 |
|
| Part 13 - IS 13630 (Scratch Hardness on Mho's Scale (One the lines of IS 13630 (Part 13))) |
2000.0 |
|
| Part 14 - IS 13630 (Drop Ball Impact Resistance (on lines of IS 13630 (Part 14))) |
2000.0 |
|
| 6.1 of IS 3367 (Compressive Strength (on the lines of IS 3367), MPa) |
2000.0 |
|
| Part 4 of IS 13630 (Coefficient of Linear Thermal Expension (on the lines of IS 13630 -Part 4),) |
3000.0 |
|
| IS 101 (Gloss at 60 Deg. (on the lines of IS 101)) |
1200.0 |
|
|
| 1574 |
National Test House (ER), Kolkata
| R&D as per Customer Specification NTH ER Paint Lab (2023) - R&D as per Customer Specification NTH ER Paint Lab |
R&D as per Customer Specification NTH ER Paint Lab |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Heat Resistance Test
at 60-65 Deg C) |
1200.0 |
|
| 3 (Heat Resistance Test
at 85-95 Deg C) |
1200.0 |
|
| 2 (Heat Resistance Test
at 150-160 Deg C) |
1200.0 |
|
|
| 1575 |
National Test House (ER), Kolkata
| EN 14399 Part-3 (2015) - High-strength structural bolting assemblies for Preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
High-strength structural bolting assemblies for Preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Dimensions of bolts) |
2000.0 |
|
| 3.2 & Table 3 (Mechanical Properties of Bolts( Rockwell Hardness Scale- C) as per Clause No.- 7 of ISO 898 (Part-1):2013) |
2000.0 |
|
| 3.2 & Table-3 (Mechanical Properties of Bolts( Proof Load) as per Clause No.- 7 of ISO 898 (Part-1):2013) |
2000.0 |
|
| 3.2 & Table-3 (Mechanical Properties of Bolts( Ultimate Tensile Load) as per Clause No.- 7 of ISO 898(Part-1):2013) |
2000.0 |
|
| 3.2 & Table-3 (Mechanical Properties of Bolts( Tensile Strength) as per Clause No.- 7 of ISO 898(Part-1):2013) |
2000.0 |
|
| 3.2 & Table-3 (Chemical Composition of Bolts as per Clause No.- 6 of ISO 898 Part-1:2013) |
2000.0 |
|
| 4.1 (Dimensions of nuts) |
2000.0 |
|
| 4.2 & Table-5 (Mechanical Properties of Nuts( Rockwell Hardness Scale - C) as per Clause No.- 7 of ISO 898(Part-2):2012) |
2000.0 |
|
| 4.2 & Table-5 (Mechanical Properties of Nuts ( Proof Load) as per Clause No.- 7 of ISO 898(Part-2):2012) |
3000.0 |
|
| 4.2 & Table-5 (Chemical Composition of Nuts as per Clause No.- 6 of ISO 898 Part-2:2012) |
2000.0 |
|
| 3.2 (Charpy Impact Test of Bolt) |
5000.0 |
|
| 3.2 (Zinc coating thickness on Bolt as per ISO 10684) |
2000.0 |
|
| 4.2 (Zinc coating thickness on Nut as per ISO 10684) |
2000.0 |
|
| 3.2 (Depth of Decarburization) |
3000.0 |
|
|
| 1576 |
National Test House (ER), Kolkata
| ILC PAINT SAMPLE (2023) - ILC PAINT SAMPLE |
ILC PAINT SAMPLE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drying Time , (a) Surface dry IS:101 Part 3 Section 1) |
400.0 |
|
| 2 (Drying Time , (b) Hard dry IS:101 Part 3 Section 1) |
400.0 |
|
| 3 (Drying Time , (c) Tack Free IS:101 Part 3 Section 1) |
400.0 |
|
| 4 (Colour as per IS:5) |
400.0 |
|
| 5 (Mass in Kg / Ten Litre as per IS:101 Part-1 Section-7) |
1200.0 |
|
| 6 (Scratch Hardness as per IS:101 Part-5 Section-2) |
1200.0 |
|
| 7 (Efflux Time (Consistency by flow cup B-4 Ford Cup) IS:101 Part-1 Section-5) |
1200.0 |
|
| 8 (Wet Opacity as per IS:101 Part-4 Section-1) |
1200.0 |
|
| 9 (Resistance to petrol Benzol Mixture as per IS:101 Part-7 Section-2 (Immersion method)) |
1200.0 |
|
| 10 (Wet Opacity meter square per liter
IS 101 part 4 sec 1 1988 RA 2019) |
1000.0 |
|
| 11 (Gloss at 60
IS 101 (Part 4/Sec 4) : 2020) |
1000.0 |
|
| 12 (Flexibility and Adhesion
IS 101 part 5 sec 2 1988 RA 2019) |
1000.0 |
|
| 13 (Resistance to Humidity Under Conditions of Condensation
IS 101 part 6 sec 1 1988 RA 2020) |
1200.0 |
|
| 14 (Accelerated Storage Stability test
(IS 8982)) |
1200.0 |
|
| 15 (Resistance to Heat
IS 101 part 7 sec 3, 2020) |
1200.0 |
|
| 16 (Resistance to Warm Water
IS 8982) |
1200.0 |
|
| 17 (Resistance to Acid
IS 2932 2013) |
1200.0 |
|
| 18 (Resistance to Alkali
IS 2932:2013) |
1200.0 |
|
| 19 (Fineness of Grind in micron
IS 101 part 3 section 5 ,2019) |
1200.0 |
|
| 20 (Finish
IS 101 part 3 sec 4,1987 RA 2019) |
1200.0 |
|
| 22 (Water Content
IS 101 part 2 sec 1 2018) |
1200.0 |
|
| 23 (Flash Point(Abel cup)
IS 101 part 1 sec 6 ,1987 RA 2019) |
1200.0 |
|
|
| 1577 |
National Test House (SR), Chennai
| IS 9103 (1999) - Specification for Concrete Admixtures - |
Specification for Concrete Admixtures - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.1 (Slump of Control Concrete Mix at 15 Minutes) |
2000.0 |
|
| 7.2.4 (Bleeding concrete additive) |
2000.0 |
|
| 8.2.3 (Length change concrete additive) |
2000.0 |
|
| 8.2.2 (Comparative Flexural Compressive strength for one duration of concrete additive) |
5000.0 |
|
| 8.2.2 (Flexural strength for one duration of concrete additive) |
5000.0 |
|
| 8.2.1 (Comparative Compressive strength for one duration of concrete) |
5000.0 |
|
| 8.2.1 (Comparative Compressive strength for three duration of concrete) |
10000.0 |
|
| 7.2.3 (Setting time of concrete additive allowable Deviation from control sample) |
2000.0 |
|
| 7.2.5 (Water content of Concrete additive) |
1000.0 |
|
| 9 (pH) |
1000.0 |
|
| 9 (Chloride ion content) |
1000.0 |
|
| 9 (Relative density) |
1000.0 |
|
| 9 (Ash content) |
1000.0 |
|
| 9 (Dry Material content) |
1000.0 |
|
| 9 (Colour (as per IS 9103)) |
1000.0 |
|
|
| 1578 |
National Test House (ER), Kolkata
| IS 15961 (2012) - Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Thickness of Sheet (base metal thickness), mm) |
1000.0 |
|
| 3.3 (Coated thickness (total coated thickness), mm) |
1000.0 |
|
| 9.1 (Mass of coating (Both sides), g/Sq m) |
2000.0 |
|
| 7.1 (Carbon. percent) |
500.0 |
|
| 7.1 (Manganese, percent) |
500.0 |
|
| 7.1 (Sulphur, percent) |
500.0 |
|
| 7.1 (Phosphorous, percent) |
500.0 |
|
| 8.3 (Tensile Strength) |
1000.0 |
|
| 8.3 (Yield Strength) |
1000.0 |
|
| 8.3 (Percent Elongation) |
1000.0 |
|
|
| 1579 |
National Test House (ER), Kolkata
| CUSTOMER SPECIFICATION NTH ER PAINT LAB 2023 (2023) - CUSTOMER SPECIFICATION NTH ER PAINT LAB 2023 |
CUSTOMER SPECIFICATION NTH ER PAINT LAB 2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Appearance) |
500.0 |
|
| 2 (Consistency) |
1000.0 |
|
| 3 (Density at 30 deg .C gm/cc) |
1200.0 |
|
| 4 (Workable time
(Pot Life)) |
1200.0 |
|
| 5 (Cured Film property) |
1000.0 |
|
| 6 (Residue on Sieve % by mass
a)300 micron sieve) |
1000.0 |
|
| 7 (Residue on Sieve % by mass
b)150 micron sieve) |
1000.0 |
|
| 8 (Residue on Sieve % by mass
c)75 micron sieve) |
1000.0 |
|
| 9 (Residue on Sieve % by mass
d)45 micron sieve) |
500.0 |
|
| 10 (Residue on Sieve % by mass
e)Pan
(below 45 micron)) |
500.0 |
|
| 11 (Specific Gravity
(at dilution Method)) |
1000.0 |
|
| 12 (Non Volatile Content% by mass) |
1500.0 |
|
| 13 (PH) |
1000.0 |
|
| 14 (Whiteness Index) |
1500.0 |
|
| 15 (Contrast Ratio) |
1500.0 |
|
| 16 (Dilution %
(Recommended by using Distilled water for Smooth viscous paint suitable for Application)) |
1000.0 |
|
|
| 1580 |
National Test House (NWR), Jaipur
| IRS-GE-1 (2016) - Specifications for Track ballast (IRS-GE-1) |
Specifications for Track ballast (IRS-GE-1) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.2.1 (Aggregate abrasion Value (IS 2386(IV):1963)) |
2500.0 |
|
| 2.2.2 (Aggregate Impact Value (IS 2386(Part IV):1963)) |
2500.0 |
|
| 2.2.3 (Water absorption ( IS 2386 (III):1963)) |
1000.0 |
|
|
| 1581 |
National Test House (ER), Kolkata
| AAI SPECIFICATION FOR RUNWAY MARKING PAINT (2023) - SPECIFICATION OF RUNWAY MARKING PAINT (White &Golden yellow |
SPECIFICATION OF RUNWAY MARKING PAINT (White &Golden yellow |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Gloss at 45 (before wear)) |
500.0 |
|
| 2 (Gloss at 45 (After wear400 revolutions )) |
2000.0 |
|
| 3 (Opacity before wear
Using diffused reflectance measured at an angle of 90) |
500.0 |
|
| 4 (Opacity' (after wear. 400 revolutions)
Using diffused reflectance measured at an angle of 90) |
2500.0 |
|
| 5 (Drying Time in minutes) |
1200.0 |
|
| 6 (Residue on 63 microns sieve %) |
1200.0 |
|
| 7 (Area coverage on standard Plate (new' surface) (Old surface) sqm/litre) |
2000.0 |
|
| 8 (Consistency at 30 deg C(+/-) by Ford cup No B-4) |
1500.0 |
|
| 1 (1) |
- |
|
| 9 (Density gm/cc) |
1200.0 |
|
|
| 1582 |
National Test House (NR), Ghaziabad
| ASTM A240 (2020) - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Tensile Strength) |
1000.0 |
|
| 5 (Yield Strength) |
1000.0 |
|
| 5 (Elongation in 50mm) |
1000.0 |
|
| 5 (Hardness) |
2000.0 |
|
| 4 (Chemical composition, % by mass) |
5000.0 |
|
| 0 (Dimension, mm) |
2000.0 |
|
| 0 (Load Test, kN) |
1000.0 |
|
|
| 1583 |
National Test House (NR), Ghaziabad
| ASTM A240/A240M-15b (2015) - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1584 |
National Test House (WR), Mumbai
| IS 636 (2018) - Non-percolating flexible fire fighting delivery hose |
Non-percolating flexible fire fighting delivery hose |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (General Requirements-Inner Lining) |
1500.0 |
|
| 6.2 (Internal Diameter, mm) |
1000.0 |
|
| 6.3 (Length, m) |
1000.0 |
|
| 6.4 (Mass, g) |
1000.0 |
|
| 6.5 (Coil Diameter, cm) |
1000.0 |
|
| 6.6 (Hydrostatic Proof Pressure Test) |
5000.0 |
|
| 6.7 (Hydrostatic Burst Pressure Test) |
5000.0 |
|
| 6.8 (Kink Test) |
2000.0 |
|
| 6.9 (Change in Length, %) |
1000.0 |
|
| 6.10 (Change in Diameter, %) |
1000.0 |
|
| 6.11.1 (Adhesion, mm/minute) |
2000.0 |
|
| 6.11.2 (Accelerated Ageing- Appearance) |
1000.0 |
|
| 6.11.2 (Accelerated Ageing- Hydrostatic Burst Pressure Test) |
5000.0 |
|
| 6.11.2 (Accelerated Ageing- Adhesion, mm/minute) |
2000.0 |
|
| 6.12 (Abrasion Resistance) |
2000.0 |
|
| 6.13 (Water Pick Up / Moisture Absorption, kg/Sq. m.) |
1000.0 |
|
| 6.14 (Heat Resistance) |
2000.0 |
|
| 6.15 (Oil Resistance Test- Appearance) |
1000.0 |
|
| 6.15 (Oil Resistance Test - Adhesion) |
2000.0 |
|
|
| 1585 |
National Test House (Satellite Centre), Varanasi
| IS 1848 : Part 2 (2018) - Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.6 ( Smoothness Bendsten) |
2000.0 |
|
| 4.6 (Wax Pick) |
2000.0 |
|
| 4.6 (Gloss) |
1500.0 |
|
| 4.6 (Double Fold) |
1500.0 |
|
| 4.6 (One Minute Cobb) |
2000.0 |
|
| 4.6 (Opacity) |
2000.0 |
|
| 4.6 (Brightness) |
2000.0 |
|
| 4.5 (pH (Hot Extract)) |
1000.0 |
|
| 4.3 (Thickness) |
1000.0 |
|
| 4.2 (Substance (Grammage),) |
1000.0 |
|
|
| 1586 |
National Test House (NWR), Jaipur
| IS 2508 (2016) - Low Density Polyethylene Films |
Low Density Polyethylene Films |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Nominal thickness) |
1000.0 |
|
|
| 1587 |
National Test House (NR), Ghaziabad
| Customer Spec P U TOP COAT (-) - MIL-PRF-85295E PU TOP COAT |
MIL-PRF-85295E PU TOP COAT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Appearance) |
1000.0 |
|
| Table 1 (Recoatability) |
1000.0 |
|
| Table 1 (Colour) |
1000.0 |
|
| Table 1 (Specular Gloss) |
1500.0 |
|
| Table 1 (Scratch Hardness at 1500 g load) |
1000.0 |
|
| Table 1 (Bend test (6.25mm Mandrel)) |
1000.0 |
|
| Table 1 (Cross-Cut Resistance (Adhesion)) |
1.0 |
|
| Table 1 (Water Resistance) |
1500.0 |
|
| Table 1 (Hydrocarbons Resistance) |
1500.0 |
|
| Clause 6.4 of IS 8662/2004 (Resistance to Acids) |
1000.0 |
|
| Table 1 (Corrosion Resistance (Neutral Salt Spray)) |
15000.0 |
|
| Table 1 (Resistant to Alkali) |
1000.0 |
|
| Table 1 (Heat Resistance) |
1000.0 |
|
| Table 1 (Flexibiliy & Adhesion) |
1500.0 |
|
|
| 1588 |
National Test House (SR), Chennai
| IS 2694 :2018 - School Chalks -Moulded,White-Specification |
School Chalks -Moulded,White-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Materials) |
1000.0 |
|
| 3.2 (Finish) |
1000.0 |
|
| 3.3 (Hardness) |
1000.0 |
|
| 3.4,Table 1 (Calcium sulphate(CaSO4.2H2O)) |
2000.0 |
|
| 3.4,Table 1 (Free Moisture) |
1000.0 |
|
| 3.4,Table 1 (Length of sticks) |
1000.0 |
|
| 3.4,Table 1 (Diameter of Thicker end) |
1000.0 |
|
| 3.4,Table 1 (Mass per 100 sticks) |
1000.0 |
|
| 3.4,Table 1 (Transverse breaking strength) |
2000.0 |
|
| 3.1 (Test for free from Poisonous & Toxic materials) |
5000.0 |
|
|
| 1589 |
National Test House (SR), Chennai
| IS 4222:2018 - Coloured Chalks, Moulded-Specification |
Coloured Chalks, Moulded-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Materials) |
1000.0 |
|
| 3.1.1 & 3.2 (Freedom from Poisonous and Toxic Materials & Colours) |
5000.0 |
|
| 3.3 (Finish) |
1000.0 |
|
| 3.4 (Performance) |
1000.0 |
|
| 3.1 (Calcined gypsum quality) |
2000.0 |
|
| 3.5 (Free moisture) |
1000.0 |
|
| 3.5,Table 1 (Length of sticks) |
1000.0 |
|
| 3.5,Table 1 (Diameter at thicker end) |
1000.0 |
|
| 3.5,Table 1 (Weight per 100 sticks) |
1000.0 |
|
| 3.5,Table 1 (Transverse breaking strength) |
2000.0 |
|
|
| 1590 |
National Test House (Satellite Centre), Varanasi
| IS 1943 (1995) - Textiles – A-twill jute bags (second revision) |
Textiles – A-twill jute bags (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1(iv) (Picks/dm) |
1000.0 |
|
| 5.1(iii) (Ends/dm) |
1000.0 |
|
| 5.1(ii) (Corrected Mass) |
1000.0 |
|
| 5.1(i) (Outside Width) |
1000.0 |
|
| 5.1(i) (Outside Length) |
1000.0 |
|
|
