| 1711 |
National Test House (NER), Guwahati
| NTH/NER/Custom/2023/06 (2023) - Customised Water Specification |
Customised Water Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (pH value - IS 3025 (Part 11) : 2022) |
1000.0 |
|
| 2 (Total dissolved solids, mg/l - IS 3025 (Part 16) : 2023) |
1000.0 |
|
| 3 (Conductivity, µS/cm) |
1000.0 |
|
| 4 (Total suspended matter, mg/l - IS 3025 (Part 17) : 2022) |
1000.0 |
|
| 5 (Total hardness (as CaCO3), mg/l - IS 3025 (Part 21) : 2009) |
1000.0 |
|
| 6 (Flouride (as F), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 7 (Sulphate (as SO4), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 8 (Iron (as Fe), mg/l - IS 3025 (Part 53) :2003, Clause 7) |
1000.0 |
|
| 9 (Turbidity, NTU - IS 3025 (Part 10) : 2023) |
1000.0 |
|
| 10 (Odour - IS 3025 (Part 5) : 2018) |
1000.0 |
|
| 11 (Total Arsenic (as As), mg/l - IS 3025 (Part 37): 2022) |
1000.0 |
|
| 13 (Bromide (as Br), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 14 (Nitrite (as NO2), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 12 (Nitrate (as NO3), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 15 (Chloride (as Cl), mg/l - IS 3025 (Part 75) : 2022) |
1000.0 |
|
| 17 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7) |
1000.0 |
|
| 18 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
1000.0 |
|
| 19 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
1000.0 |
|
| 20 (Mineral Oil, Test Method : IS 3025(Part - 39):20214, Clause 6) |
1000.0 |
|
| 21 (Biological Oxygen Demand, mg/l - IS 3025 (Part 44) : 2023) |
2500.0 |
|
| 22 (Chemical Oxygen Demand, mg/l - IS 3025 (Part 58) : 2023) |
2500.0 |
|
| 16 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
1000.0 |
|
| 23 (Ammonia (as total ammonia-N), mg/l) |
1000.0 |
|
| 24 (Phosphate (as PO4), mg/l) |
1000.0 |
|
| 25 (Total coliform bacteria) |
1000.0 |
|
| 26 (E. coli - IS 1622) |
1000.0 |
|
| 29 (Total alkalinity (as CaCO3)- IS 3025 (Part 23): 2023) |
1000.0 |
|
| 30 (Lead (as Pb), mg/l - IS 3025 (Part 47) : 1994) |
1000.0 |
|
| 31 (Cadmium (as Cd), mg/l - IS 3025 (Part 41) : 2022) |
1000.0 |
|
| 32 (Mercury (as Hg), mg/l - IS 3025 (Part 48) : 1994) |
1000.0 |
|
| 31 (Phosphate (as PO4), mg/l - IS 3025 (Part 75): 2022) |
1000.0 |
|
| 32 (Lithium (as Li), mg/l) |
1000.0 |
|
| 33 (Bismuth (as Bi), mg/l) |
1000.0 |
|
|
| 1712 |
National Test House (NR), Ghaziabad
| IS-9537(Part-II)-1981 Reaff. 2017 - Conduits for Electrical Installations- Rigid Steel Conduits |
Conduits for Electrical Installations- Rigid Steel Conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1713 |
National Test House (NR), Ghaziabad
| IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Dimensions) |
1000.0 |
|
| 7.4 (Uniformity of Thickness) |
1000.0 |
|
| 8 (Construction) |
1000.0 |
|
| 9.2 (Bending Test) |
2000.0 |
|
| 9.3 (Compression Test) |
2000.0 |
|
| 9.4 (Impact Test) |
2000.0 |
|
| 9.5 (Collapse Test) |
2000.0 |
|
| 11 (Resistance to Burning) |
2000.0 |
|
|
| 1714 |
National Test House (NR), Ghaziabad
| WD-01-HLS-94(Rev-03) (Amdt. No.4 of Oct 2020 Para No: 2.4) - Metallurgical Test of Spring Steel |
Metallurgical Test of Spring Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Chemical Composition As per IS 3195) |
4500.0 |
|
| - (Metallurgical Test) |
23500.0 |
|
|
| 1715 |
National Test House (NWR), Jaipur
| IS 13095 (2020) - Butterfly Valves for General Purposes ( First Revision ) |
Butterfly Valves for General Purposes ( First Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.1 (Performance Test) |
5000.0 |
|
| 17.2 (Hydrostatic Test of Body) |
2500.0 |
|
| 17.3 (Hydrostatic Test of Seat) |
2500.0 |
|
|
| 1716 |
National Test House (NR), Ghaziabad
| IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification |
Reinforcement couplers for mechanical splices of bars in concrete - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Tensile Strength as per IS 1608(Part 1):2022) |
1500.0 |
|
| 9.2 (Percentage Elongation as per IS 1608(Part 1):2022) |
1500.0 |
|
| 9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).) |
1000.0 |
|
| 8 (Chemical composition, % by mass) |
3000.0 |
|
|
| 1717 |
National Test House (ER), Kolkata
| NTH ER PAINT CUS SPECIFICATION 2023 (2023) - NTH ER PAINT CUS SPECIFICATION 2023
(Anti-Carbonation |
NTH ER PAINT CUS SPECIFICATION 2023
(Anti-Carbonation |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (As per Customer Requirement) |
12000.0 |
|
|
| 1718 |
National Test House (ER), Kolkata
| Custom - Wood Pellets |
Wood Pellets |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1. (Total Moisture) |
1200.0 |
|
| 2 (Ash content) |
1200.0 |
|
| 3 (Volatile matter) |
1200.0 |
|
| 4 (Fixed Carbon) |
1200.0 |
|
| 5 (Gross Calorific value) |
2000.0 |
|
| 6 (Sodium + Potassium) |
1200.0 |
|
| 7 (Cadmium) |
1200.0 |
|
| 8 (Chromium) |
1200.0 |
|
| 9 (Copper) |
1200.0 |
|
| 10 (Lead) |
1200.0 |
|
| 11 (Nickel) |
1200.0 |
|
| 12 (Zinc) |
1200.0 |
|
|
| 1719 |
National Test House (WR), Mumbai
| Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification |
Test as per Manufacturer/Customer Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test as per Manufacture / Customer Specification) |
25000.0 |
|
| 17 (LSZH Property) |
20000.0 |
|
|
| 1720 |
National Test House (WR), Mumbai
| RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR EPOXY BASED ZINC RICH PRIMER (TWO PACK) |
SPECIFICATION FOR EPOXY BASED ZINC RICH PRIMER (TWO PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Weight per epoxy equivalent on non-volatile vehicle content basis, (CL. 4 of IS 9162-79)) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max C) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Consistency (IS 101 (Part 1/Sec 5)-89) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4))) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Colour (IS 101 (Part 4/Sec 2))) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Dry Film Thickness per coat, min. a) By Brush (IS 101 (Part 3/Sec 2)-89 By Elecometer) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Volume Solid % min (Appendix-I)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Scratch hardness, (Load 1000 g), clause 3 of (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flexibility and adhesion (6.25mm mandrel), (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point (a) Component A (IS 101 (Part 1/Sec 6)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point, (b) Component B (IS 101 (Part 1/Sec 6)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Resistance to salt spray, for 1000 hrs (IS 101 (Part 6/Sec 1)-88) |
40000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Protection against corrosion under condition of condensation, for 1000 hrs (IS 101 (Part 6/Sec 1)-88) |
30000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties for Pack A, 18 Months (IS 101 (Part 6/Sec 2)-89) |
7000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties for Pack B, 18 Months (IS 101 (Part 6/Sec 2)-89) |
7000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life b) at 40 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Theoretical Spreading Capacity, min (with 10% Thinner), Appendix-I) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Fineness of grind, min (IS 101 (Part 3/Sec. 5)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Viscosity (Efflux time by ford cup No. 4 of paint i.e. mixture of two components at 27(+/-2 deg C) (with 10% Thinner)) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please Refer Annexure) |
1.0 |
|
| - (Resistance to Pull of adhesion test, (ASTM D 4541)) |
2000.0 |
|
| - (Abrasion resistance test, 1.0 Kg Load, CS-17 Wheel, 1000 cycle (ASTM D 4060)) |
3000.0 |
|
|
| 1721 |
National Test House (WR), Mumbai
| RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK) |
SPECIFICATION FOR FULL GLOSS POLYSILOXANE BASED ENAMEL (TWO PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Drying time, Max C) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Consistency (IS 101 (Part 1/Sec 5)) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Colour (IS 101 (Part 4/Sec 2))) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Dry Film Thickness per coat, minimum (IS 101 (Part 3/Sec 2)-89 By Elcometer) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Volume Solid % min (Appendix-I)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Scratch hardness, (Load 1.5 kg), clause 3 of (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flexibility and Adhesion (6.25 mm mandrel), (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point a) Component A (IS 101 (Part 1/Sec 6)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Flash Point Component B (IS 101 (Part 1/Sec 6)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Fineness of grind, Max (IS 101 (Part 3/Sec. 5)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Pot life a) at 40 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Gloss value at 60 Deg angle of incidence, Minimum (IS 101 (Part 4/Sec 4)-88)) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Keeping Properties, 18 Months (Appendix-III)) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Theoretical Spreading rate, min, Appendix-I) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27 (+/-2 Deg.C.) in supply condition (IS 101 (Part 1/Sec.5))) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests a) Resistance to 30% Sulphuric acid (wt by vol) for 24 hours (Appendix-V)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests b) Resistance to 20% caustic potash (wt by vol) for 24 hours (Appendix-V)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests c) Resistance to oil for 2 hours (Appendix-V)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests d) Resistance to Solvent for 3 hours (Appendix-V)) |
1500.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Accelerated Tests e) Resistance to Water for 240 hours (Appendix-V)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Durability Tests Accelerated Weathering test, for 1000 hours (Weather-o-meter, Xenon Arc Lamp) (Appendix-VI)) |
60000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Humidity Tests (on full system) for 4000 hrs (IS 101 (Part 6/Sec 1)) |
120000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (% Silicone on non-volatile binder basis, (min) (ASTM D 297 & Appendix-VIII) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Abrasion resistance test with 1.0 kg load & CS-17 Wheels, 1000 cycles, (ASTM D 4060)) |
3000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Adhesion & Compatibility test on full system (ASTM D 3359 & Appendix-VII)) |
2000.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please refer annexure) |
1.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4) -1987)) |
1200.0 |
|
| Appendix-VI Durability test (Durability tests Accelerated weathering test, 750 hrs (ASTM G 53, 4 hrs UV and 4 hrs condensation)) |
45000.0 |
|
|
| 1722 |
National Test House (ER), Kolkata
| IS : 2720 ( Part XXVII ) - 1977 - METHODS OF TEST FOR SOILS: PART (XXVII) DETERMINATION OF TOTAL SOLUBLE SULPHATES |
METHODS OF TEST FOR SOILS: PART (XXVII) DETERMINATION OF TOTAL SOLUBLE SULPHATES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2 (Total Soluble sulphate) |
2000.0 |
|
|
| 1723 |
National Test House (ER), Kolkata
| 7514 (2020) - Grease, Low Temperature ―Specification |
Grease, Low Temperature ―Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drop point,) |
1200.0 |
|
| 5 (Water content,) |
1200.0 |
|
| 6 (Copper strip, corrosion at 25 ºC, 24 h) |
1200.0 |
|
| 7 (Oil separation, percent by mass, 168 hrs, Max) |
1200.0 |
|
| 11 (Consistency of worked grease at 25.0 ± 0.5ºC (60 double
strokes)) |
1200.0 |
|
|
| 1724 |
National Test House (ER), Kolkata
| IS 7514 (2020) - Grease, Low Temperature ? Specification ( Second Revision ) |
Grease, Low Temperature ? Specification ( Second Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1725 |
National Test House (WR), Mumbai
| RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - Specification for Epoxy Based Micaceous Iron Oxide (Two-Pack) (Chapter-IV) |
Specification for Epoxy Based Micaceous Iron Oxide (Two-Pack) (Chapter-IV) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.4 (Weight per Epoxy Equivalent on Non-volatile vehicle content basis (IS 9162-79)) |
3500.0 |
|
| 3.5a (Pigment content (3.5a) (IS 101 (Part 8/Sec. 2)-90) |
2000.0 |
|
| Table No. II (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| Table No. II (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1))-86) |
1200.0 |
|
| Table No. II (Drying time, Max c) Hard dry at 70 Deg C (IS 101 (Part 3/Sec 1))-86) |
1500.0 |
|
| Table No. II (Consistency (IS 101 (Part 1/Sec 5)-89) |
1200.0 |
|
| Table No. II (Colour (IS 101 (Part 4/Sec 2))) |
1200.0 |
|
| Table No. II (Dry Film Thickness per coat, min. a) By Brush (IS 101 (Part 3/Sec 2)-89) |
1200.0 |
|
| Table No. II (Dry Film Thickness per coat, min. a) By airless spray (IS 101 (Part 3/Sec 2)-89) |
1200.0 |
|
| Table No. II (Volume Solid % min (Appendix-I)) |
2000.0 |
|
| Table No. II (Scratch hardness, (Load 1.5 kg), (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| Table No. II (Flexibility and adhesion (IS 101 (Part 5/Sec 2))-88) |
1200.0 |
|
| Table No.II (Flash Point for both packs (IS 101 (Part 1/Sec 6)-87) |
1200.0 |
|
| Table No. II (Resistance to salt spray for 1000 hrs (IS 101 (Part 6/Sec 1)-88) |
40000.0 |
|
| Table No. II (Protection against corrosion under condition of condensation for 1000 hrs (IS 101 (Part 6/Sec 1)-88) |
30000.0 |
|
| Table No. II (Keeping Properties for Pack A, 18 Months (IS 101 (Part 6/Sec 2)-89) |
7000.0 |
|
| Table No. II (Keeping Properties for Pack B, 18 Months (IS 101 (Part 6/Sec 2)-89) |
7000.0 |
|
| Table No. II (Pot life a) at 27 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| Table No. II (Pot life a) at 40 (+/- 2 Deg. C), Minimum (Appendix-II)) |
1500.0 |
|
| Table No. II (Mass in kg/10 liters, minimum (IS 101 (Part 1/Sec. 7)-87) |
1200.0 |
|
| Table No. II (Theoretical Coverage, Minimum (Appendix-I)) |
1200.0 |
|
| Table No. II (Adhesion and compatibility with primer and finish coat (ASTM D 3359-97 & Appendix-II)) |
2000.0 |
|
| Table No. II (Fineness of grind, minimum (IS 101 (Part 1/Sec. 7)-87) |
1200.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Please refer Annexure) |
1.0 |
|
| RDSO SPECIFICATION No.M&C/PCN/129/2018 (Finish (IS 101 (Part 3/Sec 4)-1987)) |
1200.0 |
|
| 3.5b (Pigment content: (3.5b)) |
2000.0 |
|
|
| 1726 |
National Test House (ER), Kolkata
| IS 12766 (1997) - Paper, computer - Specification (First Revision) |
Paper, computer - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1.1 (Grammage (Sustance)) |
1000.0 |
|
| 4.6 (Table 1) (Bulk) |
1000.0 |
|
| 4.6 (Table 1) (Moisture Content) |
1000.0 |
|
| 4.6 (Table 1) (Ash) |
2000.0 |
|
| 4.6 (Table 1) (Tensile index) |
2000.0 |
|
| 4.6 (Table 1) (Burst index) |
2000.0 |
|
| 4.6 (Table 1) (Tear index) |
2000.0 |
|
| 4.6 (Table 1) (Cobb Test) |
1000.0 |
|
| 4.6 (Table 1) (Opacity) |
2000.0 |
|
| 4.6 (Table 1) (Brightness) |
2000.0 |
|
| 4.6 (Table 1) (Smoothness) |
1000.0 |
|
|
| 1727 |
National Test House (ER), Kolkata
| Custom-28-ER-LM - Impact Test |
Impact Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Impact Test) |
85000.0 |
|
|
| 1728 |
National Test House (ER), Kolkata
| IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision) |
Mild steel wire for general engineering purposes (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Wrapping Test) |
1000.0 |
|
| 9.1 (Tensile Strength) |
3000.0 |
|
| 6 (Chemical Composition (Carbon)) |
625.0 |
|
| 6 (Chemical Composition (Manganese)) |
625.0 |
|
| 6 (Chemical Composition (Sulphur)) |
625.0 |
|
| 6 (Chemical Composition (Phosphorus)) |
625.0 |
|
| 0 (Mass of Zinc Coating) |
2000.0 |
|
| 0 (Uniformity of Coating) |
1000.0 |
|
| 0 (Coating Thickness) |
2000.0 |
|
| 0 (Weight) |
1000.0 |
|
| 0 (Tensile Strength of Wire) |
1000.0 |
|
| 7.1 (Wire Diameter) |
1000.0 |
|
| 7.1 (Wire Diameter) |
1000.0 |
|
| 13 (Freedom From Defects) |
1000.0 |
|
|
| 1729 |
National Test House (SR), Chennai
| NTH/WI/MC (on the lines of IS 4169) 11 (2014) - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines |
Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Force (above 1000 kN to 2000 kN) and deflection measurement calibration) |
25000.0 |
|
|
| 1730 |
National Test House (ER), Kolkata
| EN 10248-1 (1995) - Hot-rolled steel sheet piles - Part 1: Technical delivery conditions |
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Mass) |
2000.0 |
|
| 7.3 (Carbon) |
500.0 |
|
| 7.3 (Manganese) |
500.0 |
|
| 7.3 (Sulphur) |
500.0 |
|
| 7.3 (Phosphorus) |
500.0 |
|
| 7.3 (Silicon) |
500.0 |
|
| 7.3 (Nitrogen) |
500.0 |
|
| 7.4 (Yield Strength) |
1000.0 |
|
| 7.4 (Tensile Strength) |
1000.0 |
|
| 7.4 (Elongation) |
1000.0 |
|
| 8.7 (Dimensions) |
3000.0 |
|
|
| 1731 |
National Test House (NER), Guwahati
| IS 9755 (2021) - Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Visual Inspection Test) |
500.0 |
|
| Table-1 (Mass of Sack) |
500.0 |
|
| Table-1 (Ends/dm) |
500.0 |
|
| Table-1 (Picks/dm) |
500.0 |
|
| Table-1 (Breaking Strength (Lengthwise)) |
750.0 |
|
| Table-1 (Breaking Strength (Widthwise)) |
750.0 |
|
| Table-1 (Elongation@break of fabric (Lengthwise)) |
750.0 |
|
| Table-1 (Elongation@break of fabric (Widthwise)) |
750.0 |
|
| Table-1 (Breaking Strength of bottom seam) |
1000.0 |
|
| Table-1 (Inside Length) |
1000.0 |
|
| Table-1 (Inside width) |
1000.0 |
|
| Table-1 (Mass of Fabric) |
1000.0 |
|
| Table-1 (Ash Content) |
2000.0 |
|
|
| 1732 |
National Test House (NR), Ghaziabad
| NTH/NR/RPPT/Polycarbonate Sheet - Customized specification for Polycarbonate Sheet |
Customized specification for Polycarbonate Sheet |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's Requirement (Length) |
500.0 |
|
| Firm's Requirement (Width) |
500.0 |
|
| Firm's Requirement (Thickness) |
1000.0 |
|
| Firm's Requirement (Melt Flow Index) |
2000.0 |
|
| Firm's Requirement (Luminous Transmittance) |
2000.0 |
|
| Firm's Requirement (Density) |
1000.0 |
|
| Firm's Requirement (Tensile Strength at Yield) |
1000.0 |
|
| Firm's Requirement (Tensile Modulus) |
1000.0 |
|
| Firm's Requirement (Flexural Strength) |
2000.0 |
|
| Firm's Requirement (UV Layer (Top & Bottom)) |
2000.0 |
|
|
| 1733 |
National Test House (ER), Kolkata
| IS 2314 (2023) - Steel Sheet Piling Section - Specification - Part 2 Cold Formed Sheet Pile |
Steel Sheet Piling Section - Specification - Part 2 Cold Formed Sheet Pile |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Tensile Strength) |
1000.0 |
|
| 4 (Yield Stress) |
1000.0 |
|
| 4 (Elongation) |
1000.0 |
|
| 4 (Carbon) |
500.0 |
|
| 4 (Manganese) |
500.0 |
|
| 4 (Sulfur) |
500.0 |
|
| 4 (Phosphorus) |
500.0 |
|
| 4 (Silicon) |
500.0 |
|
| 8 (Dimensions) |
3000.0 |
|
| 8 (Mass) |
2000.0 |
|
| 9 (Surface Defects) |
1000.0 |
|
| 4 (Bend Test) |
1000.0 |
|
|
| 1734 |
National Test House (ER), Kolkata
| IS 15298 : Part 2 (2016) - Personal protective equipment: Part 2 safety footwear (Second Revision) |
Personal protective equipment: Part 2 safety footwear (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Test on Whole Footwear) |
4000.0 |
|
| 5.1 (Test on Upper) |
3000.0 |
|
| 5.1 (Test on Vamp lining) |
2500.0 |
|
| 5.1 (Test on Quarter Lining) |
2500.0 |
|
| 5.1 (Test on Tongue) |
1000.0 |
|
| 5.1 (Test on Outsole) |
3000.0 |
|
| 5.1 (Test on Insocks and insoles) |
1000.0 |
|
| 6.2.2.2 (Electrical Resistance(Antistatic)) |
5000.0 |
|
| 5.4.7 (pH of Upper) |
500.0 |
|
| 5.4.9 (Chromium VI Content of Upper) |
500.0 |
|
| 5.5.4 (pH of Vamp Lining) |
250.0 |
|
| 5.5.5 (Chromium VI Content of Vamp Lining) |
250.0 |
|
| 5.5.4 (pH value of Quarter Lining) |
250.0 |
|
| 5.5.5 (Chromium VI Content of Quarter lining) |
250.0 |
|
| 5.6.2 (pH value of Tongue) |
250.0 |
|
| 5.6.3 (Chromium VI Content of Tongue) |
250.0 |
|
| 5.7.2 (pH of Insock) |
250.0 |
|
| 5.7.5 (Chromium VI content of Insock) |
250.0 |
|
| 5.7.2 (pH of Insole) |
250.0 |
|
| 5.7.5 (Chromium VI content of Insole) |
250.0 |
|
|
| 1735 |
National Test House (ER), Kolkata
| IS 16719 (2022) - Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification |
Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| xii) (Flexibility (180º bend over 6.25 mm diameter rod)) |
1200.0 |
|
| xi) (Salt Spray, 5 percent NaCl (see Note)) |
100000.0 |
|
| x) (Water absorption, percent by weight, Max) |
2500.0 |
|
| ix) (Impact resistance, Min) |
2500.0 |
|
| viii) (Hardness, Min) |
2500.0 |
|
| viii) (Cathodic disbondment test, Max) |
2500.0 |
|
| vi) (Abrasion resistance, Max) |
2500.0 |
|
| v) (c) (c)Sodium hydroxide pass 1 percent by weight) |
2500.0 |
|
| v) (b) (b) Sulphuric acid pass 1 percent by weight) |
2500.0 |
|
| v) (a) (a) De-ionized water pass) |
2500.0 |
|
| v) (Immersion and vapour phase, 30 days) |
5000.0 |
|
| iv) (Adhesion test) |
2500.0 |
|
| iv) (a) (a) Tape test) |
1200.0 |
|
| iii) (Electrical insulation (holidays)) |
2500.0 |
|
| ii) (Thickness, dry film(Internal &External application)) |
1200.0 |
|
| 6.5 (Lead Restriction) |
2500.0 |
|
| 6.3 (Consistency) |
1200.0 |
|
| 6.2 (Recoating Properties) |
1200.0 |
|
| 6.1 (Application Properties) |
1200.0 |
|
|
| 1736 |
National Test House (NWR), Jaipur
| Custom Specification (Viridian Lab) - Custom Specification (Viridian Lab) |
Custom Specification (Viridian Lab) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tests) |
- |
|
|
| 1737 |
National Test House (WR), Mumbai
| Customized specification for Hypertron Hybrid - Customized specification for Hypertron Hybrid |
Customized specification for Hypertron Hybrid |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Acid-Alkali resistance (Immersed membranesTensile strength and Elongation test)-As per test method ASTM D 412) |
6000.0 |
|
| - (Hardness(Shore D) - As per test method ASTM D 2240) |
1000.0 |
|
| - (Hardness(Shore A) - As per test method ASTM D 2240) |
1000.0 |
|
| - (Elongation (As per test method ASTM D 412)) |
2000.0 |
|
| - (Tensile strength (As per test method ASTM D 412)) |
2000.0 |
|
| - (Tear Resistance (As per test method ASTM D 624)) |
4000.0 |
|
| - (Taber abrasion(As per test method ASTM D 4060)) |
3000.0 |
|
| - (Water permeability of coating(As per test method ASTM E 96)) |
5000.0 |
|
| - (Salt spray test-100 hours (As per test method ASTM B 117)) |
4000.0 |
|
| - (Impact test (As per test method ASTM D 2794)) |
1500.0 |
|
|
| 1738 |
National Test House (ER), Kolkata
| Custom/Sanitary Napkin/2023 - Custom/Sanitary Napkin/2023 |
Custom/Sanitary Napkin/2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Pad Length) |
500.0 |
|
| 2.0 (Pad width) |
500.0 |
|
| 3.0 (Pad Thickness) |
1000.0 |
|
| 5.0 (Absorbency) |
1000.0 |
|
| 6.0 (pH of Absorbent Material) |
1000.0 |
|
| 4.0 (Weight of Pad) |
1000.0 |
|
|
| 1739 |
National Test House (NWR), Jaipur
| IS 191 (2007) - Copper - Specification (Fourth Revision) |
Copper - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Copper + Silver ) |
2000.0 |
|
|
| 1740 |
National Test House (NWR), Jaipur
| IS:191 Clause 7.1 Table 4 - Copper-Specification |
Copper-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (4) (Copper) |
2000.0 |
|
|
