| 2221 |
National Test House (ER), Kolkata
| F-17 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-17 Technical Name: Novolac epoxy phenolic coating cured with polyamine adduct hardener . HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-17 Technical Name: Novolac epoxy phenolic coating cured with polyamine adduct hardener . HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2500.0 |
|
| 10 (Temperature resistance 150 ⁰ C (ASTM D 2485 method A)) |
4000.0 |
|
| 11 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 13 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 14 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 15 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 16 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 17 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 18 (Ash Content (% by mass)Component-B (Accelerator )) |
1200.0 |
|
|
| 2222 |
National Test House (ER), Kolkata
| F-16 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 comp paints, hours) |
1200.0 |
|
| 9 (Temperature resistance 650 ⁰ C (ASTM D 2485 method B)) |
4200.0 |
|
| 10 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 11 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 12 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 14 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 15 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 16 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 17 (Ash Content (% by mass)Component-B (hardener )) |
1200.0 |
|
|
| 2223 |
National Test House (ER), Kolkata
| F-15 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-15 Technical Name: Two component epoxy phenolic coating cured with polyamine adduct hardener HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-15 Technical Name: Two component epoxy phenolic coating cured with polyamine adduct hardener HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 comp paints, hours) |
2000.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2500.0 |
|
| 10 (Temperature resistance 150 ⁰ C (ASTM D 2485 method A)) |
4000.0 |
|
| 11 (Full cure at 30 Deg C (for immersion / high temperature service)) |
1500.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 14 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 15 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 16 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 17 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 18 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2224 |
National Test House (ER), Kolkata
| High Polymer Cus specification (2003) - Wrapping Coating Material |
Wrapping Coating Material |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.5 Viii (Solubility of coal tar based tape in petrol,% by mass
C-2 SOLUBILITY OF COAL TAR BASED TAPE
IN PETROL IS 15337:2003 RA 2018 (Annex c)) |
5000.0 |
|
|
| 2225 |
National Test House (ER), Kolkata
| NTH/ER/CHEM/Acidity - Total acidity of Transformer Oil |
Total acidity of Transformer Oil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Total acidity of transformer oil) |
1200.0 |
|
|
| 2226 |
National Test House (ER), Kolkata
| Custom-17-ER-LM - TRAINING |
TRAINING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Training) |
132000.0 |
|
|
| 2227 |
National Test House (ER), Kolkata
| NTH/ER/CHEM/Alumina - Alumina content as Al2O3 in Fire Brick |
Alumina content as Al2O3 in Fire Brick |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Alumina Content as Al2O3) |
2000.0 |
|
|
| 2228 |
National Test House (ER), Kolkata
| F-12 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-12 Technical Name: Heat resistant silicone aluminium paint suitable upto 540 Deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-12 Technical Name: Heat resistant silicone aluminium paint suitable upto 540 Deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Temperature resistance 540 ⁰ C Dry Service (ASTM D 2485 method B)) |
4200.0 |
|
| 9 (Temperature resistance540 ⁰ C (ASTM D 2485 method B)) |
1200.0 |
|
| 10 (Non Volatile Matter (% by mass)) |
1200.0 |
|
| 11 (Volatile Matter (% by mass)) |
1200.0 |
|
| 12 (Specific Gravity (ASTM D1475)) |
1200.0 |
|
| 13 (Ash Content (% by mass)) |
1200.0 |
|
|
| 2229 |
National Test House (ER), Kolkata
| F-11 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-11 Technical Name: Heat resistant synthetic medium based two pack Aluminium paint suitable upto 250 deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-11 Technical Name: Heat resistant synthetic medium based two pack Aluminium paint suitable upto 250 deg C dry temperature
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Temperature resistance250 ⁰ C (ASTM D 2485 method A)) |
4200.0 |
|
| 9 (Non Volatile Matter (% by mass) Component-A -Aluminium Paste) |
1200.0 |
|
| 10 (Non Volatile Matter (% by mass) Component-B (Accelerator)) |
1200.0 |
|
| 11 (Volatile Matter (% by mass) Component-A Aluminium Paste) |
1200.0 |
|
| 12 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 13 (Specific Gravity Component-A Aluminium Paste (ASTM D1475)) |
1200.0 |
|
| 14 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 15 (Ash Content (% by mass)Component-B (Accelerator)) |
1200.0 |
|
| 16 (Temperature resistance 250 ⁰ C (ASTM D 2485 method B)) |
1000.0 |
|
|
| 2230 |
National Test House (WR), Mumbai
| IS 6219 (1989) - Methods of Test for General Purpose Flat Pallets for Through Transit of Goods |
Methods of Test for General Purpose Flat Pallets for Through Transit of Goods |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Dimensions, (Length, Width, thickness, etc.), mm) |
2000.0 |
|
| 4.2 & 6.4 (Moisture Content of individual components [as per IS 1708 (P-1) 1986], in %) |
2000.0 |
|
| 4.1 (Dimension of Top Planks (upto 8 Nos), in nn) |
4000.0 |
|
| 4.1 (Dimension of Stringers (upto 3 Stringers), in mm) |
1500.0 |
|
| 4.1 (Dimension of Bottom Planks (upto 3 Planks), in mm) |
1500.0 |
|
| 4.1 (Dimension of Blocks (upto 10 Nos), in mm) |
5000.0 |
|
|
| 2231 |
National Test House (ER), Kolkata
| F-9 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-9 Technical Name :Inoranic zinc silicate coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-9 Technical Name :Inoranic zinc silicate coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 400 ⁰ C (ASTM D 2485 method B)) |
1000.0 |
|
| 11 (Temperature resistance 400 ⁰ C (ASTM D 2485 method B)) |
2000.0 |
|
| 12 (Zinc Content as Zn in dry film % by mass) |
1200.0 |
|
| 13 (MEK rub test ASTM D 4752) |
1200.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-A Zinc dust) |
1000.0 |
|
| 15 (Non Volatile Matter (% by mass) Component-B liquid accelerator) |
1000.0 |
|
| 16 (Volatile Matter (% by mass) Component-A Zinc dust) |
1200.0 |
|
| 17 (Volatile Matter (% by mass) Component-B liquid accelerator) |
1200.0 |
|
| 18 (Specific Gravity Component-A Zinc dust (ASTM D1475)) |
1200.0 |
|
| 19 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-A Zinc dust) |
1200.0 |
|
| 21 (Ash Content (% by mass)Component-B Liquid Accelerator) |
1200.0 |
|
|
| 2232 |
National Test House (ER), Kolkata
| F-8 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-8 Technical Name: Self priming surface tolerant high build epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-8 Technical Name: Self priming surface tolerant high build epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1000.0 |
|
| 11 (Temperature resistance 80 ⁰ C (ASTM D 2485 method B)) |
2000.0 |
|
| 12 (Full cure at 30 Deg C (for immersion / high temperature service)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 15 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 16 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2233 |
National Test House (SR), Chennai
| OIML R 76-1 (2006) - Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Weighing balance calibration) |
4000.0 |
|
|
| 2234 |
National Test House (ER), Kolkata
| Customised specification for Cumin Powder - Customised specification for Cumin Powder |
Customised specification for Cumin Powder |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Description) |
500.0 |
|
| 2 (Moisture, Percent by mass) |
500.0 |
|
| 3 (Total ash ,Dry basis ,Percent by mass) |
500.0 |
|
| 4 (Acid insoluble ash on dry basis, Percent by mass) |
500.0 |
|
| 5 (Volatile oil on dry basis, Percent by mass) |
500.0 |
|
| 6 (Non Volatile ether extract , Percent by mass) |
500.0 |
|
| 7 (Salmonella (in 25 g)) |
500.0 |
|
|
| 2235 |
National Test House (ER), Kolkata
| F-7 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-7 Technical Name High build coal tar epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-7 Technical Name High build coal tar epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Pot life at 30⁰C for two component paints, hrs) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1200.0 |
|
| 11 (Temperature resistance 80 ⁰ C (ASTM D 2485 method B)) |
1200.0 |
|
| 12 (Full cure at 30 Deg C (for immersion / high temperature service)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 14 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 15 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 16 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 20 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2236 |
National Test House (WR), Mumbai
| 260 (2001) - ALUMINIUM SULPHATE, NON-FERRIC |
ALUMINIUM SULPHATE, NON-FERRIC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (i) (Insoluble matter, percent by mass) |
600.0 |
|
| 4.2 (ii) (pH ( of 5 percent solution )) |
600.0 |
|
| 4.2 (iii) (Heavy metals (as Pb)) |
700.0 |
|
| 4.2(iv) (Iron (as Fe), percent by mass) |
600.0 |
|
| 4.2 (vi) (Arsenic (as AS203), parts per million) |
700.0 |
|
| 4.2 (vii) (Ammonium salts (as NH3), percent by mass) |
600.0 |
|
| 4.2 (viii) (Aluminium (as Al203), percent by mass) |
700.0 |
|
| 4.2 RESULTS AS PER ANNEXURE (4.2 RESULTS AS PER ANNEXURE) |
5000.0 |
|
|
| 2237 |
National Test House (SR), Chennai
| CUS/SR/MECH/10 - Hoist Chain |
Hoist Chain |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Proof Load) |
2500.0 |
|
| 2.0 (Breaking load) |
2500.0 |
|
|
| 2238 |
National Test House (ER), Kolkata
| Customised Specification Organic Manure (On the lines of FCO-1985) - Customised Specification Organic Manure (On the lines of FCO-1985) |
Customised Specification Organic Manure (On the lines of FCO-1985) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture, Percent by weight) |
1000.0 |
|
| 3 (Bulk density (g/cm Sq.)) |
1000.0 |
|
| 4 (Total Organic matter (percent by weight)) |
1000.0 |
|
| 5 (Total Organic carbon (percent by weight)) |
1000.0 |
|
| 6 (Total Nitrogen (as N), percent by weight) |
1000.0 |
|
| 7 (Total Phosphates (As P2O5), Percent by weight) |
1000.0 |
|
| 8 (Total potassium (as K2O), percent by weight) |
1000.0 |
|
| 9 (Calcium (as Ca), mg/kg) |
1000.0 |
|
| 10 (Magnesium (as Mg), mg/Kg) |
1000.0 |
|
| 11 (Iron (as Fe), mg/Kg) |
1000.0 |
|
| 12 (Zinc (as Zn), mg/Kg) |
1000.0 |
|
| 2 (pH (dilution at 10%)) |
1000.0 |
|
|
| 2239 |
National Test House (ER), Kolkata
| F-6 C EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6 C Technical Name : Solventless epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6 C Technical Name : Solventless epoxy coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds % minimum) |
1200.0 |
|
| 2 (DFT per coat microns) |
1200.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1200.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1200.0 |
|
| 9 (Full cure at 30oC (for immersion/ high temperature service)) |
1200.0 |
|
| 10 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 11 (Temperature resistance
(ASTM D 2485 Methods A)) |
1200.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 14 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 15 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 16 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 17 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 18 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 19 (Ash Content (% by mass)Component-B) |
1200.0 |
|
|
| 2240 |
National Test House (ER), Kolkata
| F-6B EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6B Technical Name :Epoxy high build coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6B Technical Name :Epoxy high build coating HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, microns) |
1000.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Weight per liter in kg/litre) |
1200.0 |
|
| 5 (Touch dry at 30 Deg c max (hours)) |
1200.0 |
|
| 6 (Hard dry at 30 deg C max(hours)) |
1200.0 |
|
| 7 (Over coating interval , hours) |
1200.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Non Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 11 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 12 (Volatile Matter (% by mass) Component-A (Base)) |
1200.0 |
|
| 13 (Volatile Matter (% by mass) Component-B (Hardener)) |
1200.0 |
|
| 15 (Ash Content (% by mass)Component-A (Base)) |
1200.0 |
|
| 16 (Ash Content (% by mass)Component-B) |
1200.0 |
|
| 17 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1200.0 |
|
| 18 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1200.0 |
|
| 19 (Temperature resistance 80 ⁰ C (ASTM D 2485 method A)) |
1000.0 |
|
| 1.1 (Colour
as per Manufacturer’s supply shade’) |
100.0 |
|
|
| 2241 |
National Test House (ER), Kolkata
| F-6A EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-6A Technical Name :Epoxy high build coating
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
F-6A Technical Name :Epoxy high build coating
HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, μ) |
1000.0 |
|
| 3 (Theoretical covering capacity in m2/coat/ litre) |
1000.0 |
|
| 4 (Weight per litre in Kg/litre) |
1000.0 |
|
| 5 (Touch dry at 30DegC (max.)) |
1000.0 |
|
| 6 (Hard dry at 30Deg.C (max.)) |
1000.0 |
|
| 7 (Full cure at 30 deg.C
(for immersion/ high temperature
service)) |
1000.0 |
|
| 8 (Over-coating interval, hrs) |
1000.0 |
|
| 9 (Pot life at for two component
paints, hrs) |
1000.0 |
|
| 10 (Adhesion (ASTM D 4541)) |
2000.0 |
|
| 11 (Temperature resistance 80 deg.C for 24 hrs
(ASTM D 2485 Method A)) |
2000.0 |
|
| 12 (Non Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 13 (Non Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 14 (Volatile Matter (% by mass) Component-A (Base)) |
1000.0 |
|
| 15 (Volatile Matter (% by mass) Component-B (Hardener)) |
1000.0 |
|
| 16 (Specific Gravity Component-A (Base) (ASTM D1475)) |
1000.0 |
|
| 17 (Specific Gravity Component-B curing agent(ASTM D1475)) |
1000.0 |
|
| 18 (Ash Content (% by mass)Component-A (Base)) |
1000.0 |
|
| 19 (Ash Content (% by mass)Component-B) |
1000.0 |
|
|
| 2242 |
National Test House (ER), Kolkata
| F-2 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-2 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name : Aliphatic PU finish paint |
F-2 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name : Aliphatic PU finish paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
1000.0 |
|
| 2 (DFT per coat, microns) |
1000.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Weight per liter in kg/litre) |
1000.0 |
|
| 5 (Touch dry at 30 Deg c) |
500.0 |
|
| 6 (Hard dry at 30 deg C max) |
500.0 |
|
| 7 (Over coating interval , hours) |
1000.0 |
|
| 8 (Potlife at 30 deg C for 2 component paints, hours) |
1000.0 |
|
| 9 (Adhesion ASTM D 4541 (Mpa)) |
2000.0 |
|
| 10 (Abrasion Resistance, mg per
1000gm/CS17/1000cycle (ASTM D4060)) |
2000.0 |
|
| 11 (Temperature resistance 80⁰ C
(ASTM D 2485 Method A)) |
2000.0 |
|
| 12 (Non Volatile Matter, % By mass Component-A (Base)) |
1000.0 |
|
| 13 (Non Volatile Matter, % By mass Component-B (Hardener)) |
1000.0 |
|
| 14 (Volatile Matter, % By mass Component-A (Base)) |
1000.0 |
|
| 15 (Volatile Matter, % By mass Component-B (Hardener)) |
1000.0 |
|
| 16 (Specific gravity of base (ASTM D1475)) |
1000.0 |
|
| 17 (Specific gravity of Curing agent (ASTM D1475)) |
1000.0 |
|
| 18 (Ash Content, % By mass Component-A (Base)) |
1000.0 |
|
| 19 (Ash Content, % By mass Component-B (Hardener)) |
1000.0 |
|
|
| 2243 |
National Test House (ER), Kolkata
| P-6 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name :Epoxy zinc phosphate primer |
P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS
Technical Name :Epoxy zinc phosphate primer |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume soilds %) |
2000.0 |
|
| 2 (DFT per coat microns) |
100.0 |
|
| 3 (Theoretical covering capacity in m sq/coat/litre) |
1000.0 |
|
| 4 (Touch dry at 30 Deg c max (hours)) |
1000.0 |
|
| 5 (Hard dry at 30 deg C max(hours)) |
1000.0 |
|
| 6 (Over coating interval , hours) |
1000.0 |
|
| 7 (Potlife at 30 deg C for 2 comp paints, hours) |
1000.0 |
|
| 8 (Adhesion ASTM D 4541 (Mpa)) |
5000.0 |
|
| 9 (Temperature resistance min deg C 80 METHOD A
ASTM D2485) |
3000.0 |
|
| 10 (Non Volatile Matter % By mass Component-A (Base)) |
1000.0 |
|
| 11 (Non Volatile Matter % By mass Component-B (Hardener)) |
1000.0 |
|
| 12 (Volatile Matter % By mass Component-A (Base)) |
500.0 |
|
| 13 (Volatile Matter % By mass Component-B (Hardener)) |
500.0 |
|
| 14 (Specific Gravity Component-A (Base)) |
500.0 |
|
| 15 (Specific Gravity Component-B (Hardener)) |
500.0 |
|
| 16 (Ash content Component-A (Base)) |
1000.0 |
|
| 17 (Ash Content % By mass Component-B (Hardener)) |
1000.0 |
|
| 10 (weight per litre in kg/litre) |
500.0 |
|
| 11 (Abrasion Resistance(ASTM D4060)1000gm load/1000Cycles
CS17 wheel or CS 10 wheel) |
2000.0 |
|
|
| 2244 |
National Test House (WR), Mumbai
| JAPANESE INDUSTRIAL STANDARD JIS K 5659 (2018) - JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures |
JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4 (Condition inside container
As per 4.1.2 a of JIS K5600-1-1) |
1200.0 |
|
| 7.5 (Low temperature stability at (-5 deg.C) As per 3.3.7 of JIS K5600-1-1) |
5000.0 |
|
| 7.6 (Surface Drying Property as per JIS K 5600) |
1200.0 |
|
| 7.7 (Appearance of the Film ( As per of JIS K5600-1-1 )) |
1200.0 |
|
| 7.8 (Pot life) |
1500.0 |
|
| 7.10 (Specular Gloss (60º) as per JIS K5600-4-7) |
1200.0 |
|
| 7.11 (Overcoatability) |
1200.0 |
|
| 7.12 (Flexibility 10 mm dia mandrel of type I tester as per JIS 5600-5-1) |
1200.0 |
|
| 7.13 (Falling weight Resistance 300 gram weight& drop height 500 mm (As per JIS K 5600-5-3)) |
1500.0 |
|
| 7.14 (Interlayer adhesion-I(between undercoat and intermediate coat)) |
2000.0 |
|
| 7.15 (Interlayer adhesion-II(between Intermediate coat & top coat)) |
2000.0 |
|
| 7.16 (Alkali Resistance (dilute Calcium Hydroxide),Immersing method, for 168 Hours at 23 ±1 Deg c) |
1500.0 |
|
| 7.17 (Acid Resistance (dilute Sulfuric Acid 5gram per litre),Immersing method, for 168 Hours at 23 ±1 Deg c) |
1500.0 |
|
| 7.19 (Non Volatile Matter content % As per JIS K 5601-1-2) |
1200.0 |
|
| 7.20 (Accelerated weathering Resistance- Xenon arc Exposure period 2000 hours
As per of JIS K5600-7-7) |
120000.0 |
|
| 7.20 b (Accelerated weathering Resistance by Xenon arc Exposure period 500 hours) after 24 Months Natural Weathering Resistance test (As per of JIS K5600-7-7)) |
15000.0 |
|
| 7.21 (Natural Weathering Resistance
(for 24 Months) as per JIS K 5600-7-6) |
20000.0 |
|
| JIS K 5659 (Please refer annexure for test results) |
1.0 |
|
| 7.18 (Humidity and Cool-Heat Cycling Resistance Test Condition :Immersion in water at 23 Deg C for 18 hours followed by cooling at -20 deg C for 03 Hours ,Heat at 50 deg C for 03 hours (10 Cycles)) |
10000.0 |
|
| JIS K 5659 (Scratch Hardness test (IS 101 (Part 5/Sec 2))) |
1200.0 |
|
| JIS K 5659 (Adhesion, Cross Cut) |
1500.0 |
|
| JIS K 5659 (Mix density, (IS 101 (Part 1/Sec 7)) |
1200.0 |
|
| JIS K 5659 (Dry Film Thickness (DFT) (IS 101 (Part 3/Sec 2)) |
1200.0 |
|
| 7.9 (Contrast ratio %) |
2000.0 |
|
|
| 2245 |
National Test House (NWR), Jaipur
| IS 9537 : Part 2 (1981) - Specification for conduits for electrical installations: Part 2 rigid steel conduits |
Specification for conduits for electrical installations: Part 2 rigid steel conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2246 |
National Test House (WR), Mumbai
| 13209 (2024) - Indelible Ink-Specification |
Indelible Ink-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Description) |
1000.0 |
|
| 3.3 (Colour) |
1000.0 |
|
| 3.4 (pH) |
1000.0 |
|
| 3.5 (Total solids) |
1000.0 |
|
| 3.6 (Development) |
1000.0 |
|
| 3.7.1 (Performance- Resistance to Bleaching) |
1000.0 |
|
| 3.7.2 (Performance- Resistance to organic solvents) |
1000.0 |
|
|
| 2247 |
National Test House (ER), Kolkata
| NTH ER PAINT LAB CUSTOMER SPECIFICATION (2012) - PAINT ,RFU,FINISHING,MATT AIR DRYING BRUSHING /SPRAYING |
PAINT ,RFU,FINISHING,MATT AIR DRYING BRUSHING /SPRAYING |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Film strength at impact
Impact Resistance Test
(ASTM D 2794)) |
2000.0 |
|
| 2 (Hardness test: Pencil Hardness test
IS:101(part 5/Sec1)1988
(Reaffirmed2019).) |
1000.0 |
|
| 3 (Scratch Hardness test (1500 g weight) for pencil hardness up to 2H
IS 101 Part 5 sec 2 RA 2019) |
1000.0 |
|
| 4 (Drying Time a) Surface Dry
IS 101 (Part 3/sec 1), 1986) |
1000.0 |
|
| 5 (Drying Time b) Hard Dry &tack free
IS 101 (Part 3/sec 1), 1986) |
1000.0 |
|
| 6 (Specular Gloss at 60 º IS 101 (Part 4/Sec 4)) |
1000.0 |
|
| 7 (Finish
IS 101 part 3 sec 4,1987) |
1000.0 |
|
| 8 (Fineness of Grind ,in microns
IS 101 part 3 section 5) |
1000.0 |
|
| 9 (Mass in kg/10 ltrs
IS 101 part 1 sec 7) |
1000.0 |
|
| 10 (Accelerated Weathering Test
QUV –UVA lamp 340 nm
For10 days(at Basic Climate Condition) MIL Std -810-G) |
20000.0 |
|
| 11 (Resistance to Petrol -Benzene Mixture Immersion test
jSS-8010-82:2012,Appendix -D.) |
2000.0 |
|
| 12 (Resistance to Warm water
jSS-8010-82:2012,Appendix-E) |
1000.0 |
|
| 13 (Accelerated Storage Stability Duration 96 hours at 60 Deg .C
jSS-8010-82:2012,Appendix -C.) |
2000.0 |
|
| 14 (Resistance to salt Water:- 7 Cycles JSS-8010-82:2012,Appendix -F.
Test Condition (one Cycle):-One Hour immersion in salt water Three Hours outside exposure at angle of 45 Deg Facing south then one hour refrigeration at 4 plus minus 2 Deg C then again exposued angle of 45 Deg Facing south till next cycle) |
3500.0 |
|
| 15 (Resistance to Lubricating oil (immersion test for 2 hours at 50 Deg c
jSS-8010-82:2012,Appendix -A.) |
1000.0 |
|
| 16 (Resistant to heat (at 150 deg c for 2 hours)
JSS-8010-82:2012,Appendix-B) |
1000.0 |
|
| 17 (Resistance to low temperature for 120 hours at-20 deg c (+/- 0.1 deg c )) |
5000.0 |
|
| 18 (Accelerated weathering Test
Xenon Radiation For 30days
as per moderate climatic conditions.
MIL STD -810-G.) |
40000.0 |
|
| 6 (ANTI GRAFFITI PROPERTIES
ASTM D 6578) |
5000.0 |
|
| 1.2 (COVERING STRENGTH
covering strength must be tested on a Garmsen clear glass plate with a
minimum dry film thickness applied according to WN 11500 over a black and
white contrast card. There may be no visible contrast between the black and
white backgrounds.) |
2500.0 |
|
|
| 2248 |
National Test House (NR), Ghaziabad
| IS 6911 (2017) - Stainless Steel Plate, Sheet and Strip - Specification |
Stainless Steel Plate, Sheet and Strip - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6,Table 3 Chemical Composition (Tests as per Annexure ( Chemical Composition )- NON NABL) |
1000.0 |
|
| 6,Table 3 Chemical Composition (Tests as per Annexure ( Chemical Composition )-NABL) |
5000.0 |
|
|
| 2249 |
National Test House (NR), Ghaziabad
| RDSO-Poly Ring (2022) - Poly Ring |
Poly Ring |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Compression Load) |
8000.0 |
|
| 2 (Material Identification) |
4980.0 |
|
|
| 2250 |
National Test House (NER), Guwahati
| IS 383 for coarse aggregate (2016) - Coarse and fine aggregate for concrete |
Coarse and fine aggregate for concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Test for Combined Flakiness and Elongation Index
( IS:2386(part -I)1963)) |
3000.0 |
|
| 4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963)) |
2000.0 |
|
| 2 (Test for Specific Gravity ( IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption ( IS:2386(part -III)1963)) |
1000.0 |
|
| 13 (Test for Soundness of Aggregate(IS 2386(5):1963)) |
2000.0 |
|
| 7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963)) |
500.0 |
|
| 8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963)) |
500.0 |
|
| 11 (Test for Surface moisture(IS 2386(3):1963)) |
1000.0 |
|
| 14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method) |
3000.0 |
|
| 5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 12 (Test for Deleterious Materials(IS 2386(Part 2):1963)) |
2000.0 |
|
|
