| 151 |
IS-9537(Part-II)-1981 Reaff. 2017 - Conduits for Electrical Installations- Rigid Steel Conduits |
Conduits for Electrical Installations- Rigid Steel Conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Wall Thickness) |
500.0 |
|
| 9.3 (Compression Test) |
3000.0 |
|
| 7 (Outside Diameter) |
500.0 |
|
| 7 (Checking the Minimum Outside Diameter (Cl.7.2.1)) |
500.0 |
|
| 7 (Checking the Maximum Outside Diameter (Cl.7.2.2)) |
500.0 |
|
| 9.2 (Bending Test) |
1000.0 |
|
|
| 152 |
IS 1599 (2023) - Metallic Materials - Bend Test |
Metallic Materials - Bend Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 1599 (Bend test) |
1500.0 |
|
|
| 153 |
IS 9537 : Part 2 (1981) - Specification for conduits for electrical installations: Part 2 rigid steel conduits |
Specification for conduits for electrical installations: Part 2 rigid steel conduits |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 154 |
IS 6911 (1992) - Stainless steel plate, sheet and strip |
Stainless steel plate, sheet and strip |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Sulphur (% by mass)) |
700.0 |
|
| 3.1 (Phosphorous (% by mass)) |
700.0 |
|
| 3.1 (Chromium (% by mass)) |
500.0 |
|
| 3.1 (Nickel (% by mass)) |
500.0 |
|
| 3.1 (Molybdenum (% by mass)) |
500.0 |
|
|
| 155 |
Custom specification NTH WR Metal Sample - Custom specification NTH WR Metal Sample (OES) |
Custom specification NTH WR Metal Sample (OES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Custom specification NTH WR Metal Sample (Please referred annexure) |
5000.0 |
|
| custom specification NTH WR Metal OES (Carbon (C)) |
700.0 |
|
| custom specification NTH WR Metal OES (Manganese (Mn)) |
700.0 |
|
| custom specification NTH WR Metal OES (Silicon (Si)) |
700.0 |
|
| custom specification NTH WR Metal OES (Sulphur (S)) |
700.0 |
|
| custom specification NTH WR Metal OES (Phosphorus (P)) |
700.0 |
|
| custom specification NTH WR Metal OES (Nickel (Ni)) |
700.0 |
|
| custom specification NTH WR Metal OES (Molybdenum (Mo)) |
700.0 |
|
| custom specification NTH WR Metal OES (Chromium (Cr)) |
700.0 |
|
| custom specification NTH WR Metal OES (Titanium (Ti)) |
700.0 |
|
|
| 156 |
Custom for IS:7328 - Custom for IS:7328 |
Custom for IS:7328 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Customer specified) |
2000.0 |
|
| 2 (Customer specified) |
2000.0 |
|
|
| 157 |
Custom for IS:5405 - Sanitary Napkin with wings |
Sanitary Napkin with wings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (As per Customer Requirements) |
2000.0 |
|
| 2 (As per customer requirements) |
500.0 |
|
| 3. (As per customer requirements) |
500.0 |
|
| 4 (Customer Specified) |
500.0 |
|
| 5 (Customer Specified) |
500.0 |
|
| 6 (Customer Specified) |
1000.0 |
|
| 7 (Customer Specified) |
1000.0 |
|
| 8 (Customer Specified) |
500.0 |
|
| 9 (Customer Specified) |
500.0 |
|
| 10 (Customer Specified) |
2000.0 |
|
| 11 (Customer Specified/On the lines of IS:1390) |
1000.0 |
|
|
| 158 |
IS 1757 Part 1 (2020) - Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision ) |
Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Impact Test without sample preparation) |
4000.0 |
|
| 9 (Impact Test with sample preparation) |
5000.0 |
|
|
| 159 |
IS 1500 : Part 1 (2019) - Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision) |
Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Hardness) |
2000.0 |
|
|
| 160 |
Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060 |
Method of Test for Paper on the lines of IS 1060 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Tests) |
2000.0 |
|
| 1 () |
- |
|
|
| 161 |
ASTM E 1086 (2014) - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry |
Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Chromium (Cr)- ASTM E 1086) |
1000.0 |
|
| - (Nickel (Ni) ASTM E 1086) |
1000.0 |
|
|
| 162 |
IS 209 (1992) - Zinc ingot - Specification (Fourth Revision) |
Zinc ingot - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Zinc) |
2000.0 |
|
|
| 163 |
IS 4027 : Part 6 (1987) - Methods of chemical analysis of bronzes: Part 6 determination of zinc by complexometric (EDTA) method (First Revision) |
Methods of chemical analysis of bronzes: Part 6 determination of zinc by complexometric (EDTA) method (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Zinc % by mass) |
2000.0 |
|
|
| 164 |
IS 4027 : Part 1 (1987) - Methods of chemical analysis of bronzes: Part 1 determination of copper and lead by electrolytic method (First Revision) |
Methods of chemical analysis of bronzes: Part 1 determination of copper and lead by electrolytic method (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Copper) |
2000.0 |
|
|
| 165 |
Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 166 |
IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST |
SPECIFICATIONS FOR TRACK BALLAST |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.3 (Size and Gradation (IRS-GE-I, JUNE-2016)) |
2000.0 |
|
| 2.2.3 (Water absorption (IS 2386 (Part III):1963)) |
1000.0 |
|
| 2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
| 2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963) |
1500.0 |
|
|
| 167 |
IS 1608 : Part 1 (2018) - Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision) |
Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 14 (Tensile Test with sample preparation) |
4000.0 |
|
| 14 (Tensile Test without sample preparation) |
3000.0 |
|
| 1 () |
- |
|
| 0 (Mechanical Tests) |
5000.0 |
|
| 0 (Bend Test) |
2000.0 |
|
|
| 168 |
IS 1003 : Part 2 (1994) - Timber Panelled And Glazed Shutters: Part 2 Windows and Ventilator Shutters |
Timber Panelled And Glazed Shutters: Part 2 Windows and Ventilator Shutters |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Table 1, Fig 2 to 4 (Construction and workmanship -IS 1003 (Part 2) : 1994) |
1000.0 |
|
| 7, Table 2 & 3, Fig 6 (Dimensions, Sizes and Tolerances -IS 1003 (Part 2) : 1994) |
2000.0 |
|
| 8 (Location of Fittings and accessories -IS 1003 (Part 2) : 1994) |
1000.0 |
|
| 9 (Finish -IS 1003 (Part 2) : 1994) |
1000.0 |
|
| 10 (Glazing -IS 1003 (Part 2) : 1994) |
1000.0 |
|
| 11.1 (Slamming Test -IS 1003 (Part 2) : 1994, Annex C) |
1000.0 |
|
|
| 169 |
IS 1003 : Part 1 (2003) - Timber Panelled and Glazed Shutters-Door shutter |
Timber Panelled and Glazed Shutters-Door shutter |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Location of fittings and accessories -IS 1003 (Part 1) : 2003) |
1000.0 |
|
| 6, Table 1, Fig 2 to 4 (Construction and Workmanship -IS 1003 (Part 1) : 2003) |
2000.0 |
|
| 9 (Finish -IS 1003 (Part 1) : 2003) |
1000.0 |
|
| 11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998) |
2000.0 |
|
| 11.2 (General Flatness-IS 4020 (Part 3):1998) |
1000.0 |
|
| 11.3 (Local Planeness-IS 4020 (Part 4):1998) |
1000.0 |
|
| 11.4 (Impact Indentation-IS 4020 (Part 5):1998) |
1000.0 |
|
| 11.5 (Flexure Testing-IS 4020 (Part 6):1998) |
1000.0 |
|
| 11.6 (Edge Loading Test-IS 4020 (Part 7):1998) |
1500.0 |
|
| 11.7 (Shock Resistance Test-IS 4020 (Part 8):1998) |
1500.0 |
|
| 11.8 (Buckling Test-IS 4020 (Part9):1998) |
1500.0 |
|
| 11.9 (Slamming Test-IS 4020 (Part 10):1998) |
1500.0 |
|
| 11.10 (Misuse Test-IS 4020 (Part 11):1998) |
1.0 |
|
| 11.11 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998) |
1.0 |
|
|
| 170 |
IS 2095 : Part 3 (2018) - Gypsum Plaster Boards — Specification Part 3 Reinforced Gypsum Plaster Boards, Tiles, Cornices and Mouldings ( Third Revision ) |
Gypsum Plaster Boards — Specification Part 3 Reinforced Gypsum Plaster Boards, Tiles, Cornices and Mouldings ( Third Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, 6.1 to 6.5, Table1 (Dimensions and Tolerances-IS 2095 (3):2018) |
500.0 |
|
|
| 171 |
IS 2095 : Part 2 (2001) - Gypsum plaster boards - specification: Part 2 coated/laminated gypsum plaster boards |
Gypsum plaster boards - specification: Part 2 coated/laminated gypsum plaster boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 to 6.5, Table1 (Dimensions & Tolerances, Shape, Mass-IS 2095 (2):2001) |
2000.0 |
|
| 7 (Finish--IS 2095 (2):2001) |
500.0 |
|
| 8.1 (Visual inspection-IS 2095 (2):2001) |
500.0 |
|
| 8.2 (Transverse strength-IS: 2542 (Part 2/Sec 4 )) |
4000.0 |
|
|
| 172 |
IS 2095 : Part 1 (2011) - Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1, Table1 /Table2, 8.1 (Dimensions-IS: 2542 (Part 2/Sec 1)) |
500.0 |
|
| 7.2, 8.2 (Taper Profile-IS 2095 (1):2011) |
2000.0 |
|
| 7.3, Table3, 8.1 (Transverse Strength-IS: 2542 (Part 2/Sec 4)) |
4000.0 |
|
| 10 (Finish-IS 2095 (1):2011) |
500.0 |
|
|
| 173 |
Timber-Custom (1973 & 1986) - Timber Identification, moisture content and Density-Custom |
Timber Identification, moisture content and Density-Custom |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cust 1 (Identification of Timber (IS 4970:1973)) |
5000.0 |
|
| Cust 2 (Moisture Content-IS 1708 (1):1986) |
1000.0 |
|
| Cust 3 (Density-IS 1708 (2):1986) |
1000.0 |
|
| Cust4 (Static Bending Strength, MOR & MOE-Kg/cm2 IS 1708(5):1986) |
2000.0 |
|
| Cust 5 (Compressive strength parallel to the grain IS 1708 (8):1986) |
2000.0 |
|
| Cust 6 (Compressive strength perpendicular to the grain, Kg/cm2 , IS 1708 (8):1986) |
2000.0 |
|
|
| 174 |
IS 4970 & 1708 Identification of Wood & Moisture content (1973) - Key for Identification of Commercial Timbers |
Key for Identification of Commercial Timbers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Identification of Timber (IS 4970:1973)) |
5000.0 |
|
| 2 (Test for Moisture Content(IS 1708(Part 1):1986) |
1000.0 |
|
| 0 (Specific gravity/Density/gm/cm3) |
500.0 |
|
|
| 175 |
IS 710 (2010) - Marine Plywood -Specification |
Marine Plywood -Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Dimensions-IS 710:2010, Annex B) |
1000.0 |
|
| 7 (Workmanship & Finish-IS 710:2010) |
1000.0 |
|
| 9.1.1 (Moisture content-IS 1734 (Part 1):1983) |
1000.0 |
|
| 9.1.2.1 (Glue Adhesion in Dry State-Glue Shear Strength-IS 1734 (Part 4):1983) |
2000.0 |
|
| 9.1.2.2 (Glue Adhesion in Dry State-Adhesion of Plies in dry state-IS 1734 (Part 5):1983) |
1000.0 |
|
| 9.1.3.1.1 (Water Resistance Test-Glue Shear Strength-IS 710:2010 & IS 1734 (Part 4):1983) |
2500.0 |
|
| 9.1.3.1.2 (Water Resistance Test-Adhesion of Plies-IS 710:2010 & IS 1734 (Part 5):1983) |
1000.0 |
|
| 9.1.4 (Tensile Strength-IS 1734 (Part 9):1983) |
2500.0 |
|
| 9.1.5 (Mycological Test-Observation, Glue Shear Strength and Adhesion of Plies- IS 1734 (Part 7, 4 & 5):1983) |
2500.0 |
|
| 9.1.6 (Static Bending Strength-IS 1734 (Part 11):1983) |
3000.0 |
|
| 9.1.7 (Wet Bending Strength-IS 710:2010 & IS 1734 (Part 11):1983) |
3000.0 |
|
| 9.1.8 (Retention of preservative-IS 2753 (Parts 1 & 2)) |
3000.0 |
|
|
| 176 |
IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 177 |
IS IS 1708 : Part 1 (1986) - Timber |
Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 0 (Moisture Content) |
1000.0 |
|
| 1 (1) |
- |
|
|
| 178 |
IS 383 for coarse aggregate (2016) - Coarse and fine aggregate for concrete |
Coarse and fine aggregate for concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963)) |
2000.0 |
|
|
| 179 |
IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
|
| 180 |
IS 5405 (2019) - Sanitary napkins – Specification (second revision) |
Sanitary napkins – Specification (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2 (Ability to withstand pressure after abrorption) |
1000.0 |
|
| 7.1 (pH Value) |
5000.0 |
|
| 6 (Manufacture, workmanship and finish) |
1000.0 |
|
| 5 (Dimensions / Sizes) |
1000.0 |
|
| 4 (Type and Shape of Napkins) |
1000.0 |
|
| 3 (Material (Cover, absorbant core, bottom sheet)) |
1000.0 |
|
| 5 (Pad Length (Absorbent core only)) |
1000.0 |
|
| 5 (Pad width (Absorbent core only)) |
1000.0 |
|
| 7.3.2 (Test for common skin Pathogen-Staphylococcus Aureus) |
3000.0 |
|
| 7.3.1 (Bacterial and fungal Bioburden) |
5000.0 |
|
|
