| 181 |
Thermal Ageing & Environmental Test for RTD - Thermal Ageing & Environmental Test for RTD |
Thermal Ageing & Environmental Test for RTD |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (Thermal Ageing & Environmental Test for RTD) |
20000.0 |
|
|
| 182 |
IS 894 (2023) - SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 2 (Fibre Composition) |
2000.0 |
|
| Table-1 (Ends per inch) |
1000.0 |
|
| Table-1 (Picks per inch) |
1000.0 |
|
| Table-1 (Breaking Load, kgs) |
2000.0 |
|
| Table-1 (Weight per square meter (GSM)) |
1000.0 |
|
| Table-1 (Type of Weaves) |
1000.0 |
|
| Table 2 (Colour fastness to Light) |
3000.0 |
|
| Table 2 (Colour fastness to Washing) |
2000.0 |
|
| Table 2 (Colour fastness to Rubbing) |
2000.0 |
|
|
| 183 |
IS 9968 (Part-1) 1988 (1988) - SPECIFICATlON FOR ELASTOMER INSULATED CABLES |
SPECIFICATlON FOR ELASTOMER INSULATED CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.2.(a) (Annealing Test (For Copper)) |
1000.0 |
|
| 21.2.(b) (Tensile test ( for alummrum )) |
1000.0 |
|
| 21.2.(c) (wrapping test ( for aluminium );) |
500.0 |
|
| 21.2.(d) (Conductor resistance test) |
1500.0 |
|
| 21.2.(e) (Test for thickness of insulation and sheath.and overall diameter ( where specified )) |
1000.0 |
|
| 21.2.(f) (Tensile strength and elongation at break of insulation and sheath) |
1500.0 |
|
| 21.2.(g) (Hot set test for insulation and sheath) |
1000.0 |
|
| 21.2.(h) (High voltage test) |
3000.0 |
|
| 21.2.(i) (Insulation resistance test) |
2000.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
|
| 184 |
IS:1554 ( Part 1 ) - 1988 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1(a).(1),15.2(a) (Annealing test ( for copper )) |
1000.0 |
|
| 15.2(b),15.1(a).(2) (Tensile test ( for aluminium )) |
1000.0 |
|
| 15.1(a).(3),15.2(c) (Wrapping test ( for aluminium )) |
500.0 |
|
| 15.1(a).(4),15.2(d),15.3(a) (Conductor resistance test) |
2000.0 |
|
| 15.2(e),15.1(c) (Test for thickness of insulation and sheath) |
1000.0 |
|
| 15.2(f), (Tensile strength and elongation at break of insulation and sheath) |
1000.0 |
|
| 15.2(g),15.1(e) (Insulation resistance test) |
1500.0 |
|
| 15.2(h),15.1(g) (High voltage test at room temperature) |
1000.0 |
|
| 15.1.1 , 15.2.1 (Oxygen index test) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Temperature index) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Flame retmdance test on single cable) |
5000.0 |
|
| 15.1.1 (Flame retardance test on bunched cables) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Test for halogen acid gas evolution) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Smoke density) |
5000.0 |
|
| 15.1(b) (Test for armouring wires/strips-Dimension) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Tensile strength) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Elongation at break) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Torsion test for round wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Winding test for formed wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Uniformity of zinc coating) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Mass of zinc coating) |
2000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Resistivity) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Tensile strength and elongation at break) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Ageing in air oven) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Shrinkage test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Hot deformation) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Loss of mass in air oven) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Heat shock test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Thermal stability) |
1000.0 |
|
| 15.1(f) (High voltage test ( water immersion test )) |
3000.0 |
|
| 15.1(h) (Flammability test) |
500.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
| - (Test on 4th core) |
2000.0 |
|
|
| 185 |
RDSO/SPN/TC/98/2011 Rev 0 (2011) - RDSO Specification for Surge Protective Devices for Telecommunication Equipments |
RDSO Specification for Surge Protective Devices for Telecommunication Equipments |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 5.9 (Nominal Voltage Operation) |
3000.0 |
|
| Cl 5.9 (Maximum continuous operating voltage) |
3000.0 |
|
| Cl. 5.9 (Voltage Protection Level) |
5000.0 |
|
| Cl. 5.9 (Temperature Conditioning-Cold Test: Temperature: -10 deg C, Duration: 4 hours, Electrical Loading of Device:230V,50 Hz.) |
5000.0 |
|
| Cl. 5.9 (Temperature Conditioning-Dry Heat Test, Temperature: +60 deg C,Duration: 4 hours, Electrical Loading of Device: 230V,50 Hz) |
5000.0 |
|
| Cl. 5.9 (Temperature Conditioning-Damp Heat Test: Temperature: +60 deg C,Relative Humidity:95%,Duration: 4 hours, Electrical Loading of Device: 230V,50 Hz) |
5000.0 |
|
| Cl. 5.9 (Visual Indication) |
2000.0 |
|
| Cl. 5.9 (Degree of Protection-IP20(Protection against Electric Shock): Test Finger Diameter: 12 mm, Applied Force: 10 N, Application Point: Every possible accessible position.) |
7500.0 |
|
| Cl. 5.9 (Fire retardant Test as per UL94(Resistance to Flame & ignition):Flammability Test:) |
5000.0 |
|
|
| 186 |
Custom - Cement content |
Cement content |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Cement Content) |
5000.0 |
|
| 2 ((Cement : sand : aggregate) ratio) |
5000.0 |
|
|
| 187 |
MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1 - MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1 |
MAINTENANCE INSTRUCTION NUMBER TI/MI/0050 - Rev. 1 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.0 (Breaking Strength) |
2000.0 |
|
| 5.0 (Retention of breaking strength after UV exposure) |
2000.0 |
|
| 5.0 (UV exposure (144 hrs)) |
7200.0 |
|
|
| 188 |
BP 22494 Rev No. 07 - Epoxy Glass Mat Laminated Sheets & Components Fire Retardant. |
Epoxy Glass Mat Laminated Sheets & Components Fire Retardant. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Specific Gravity) |
1000.0 |
|
| 9.1 (Tensile Strength) |
2000.0 |
|
| 9.2 (Cross Breaking Strength) |
2000.0 |
|
| 9.4 (Compression Strength - Proof) |
2000.0 |
|
| 9.5 (Splitting Load) |
2000.0 |
|
| 8.3 (Specific Gravity) |
1000.0 |
|
| 9.1 (Tensile Strength) |
2000.0 |
|
| 9.2 (Cross Breaking Strength) |
2000.0 |
|
| 9.4 (Compression Strength - Proof) |
2000.0 |
|
| 9.5 (Splitting Load) |
2000.0 |
|
|
| 189 |
NCD 1435 (-) - NCD 1435 EPOXY RED OXIDE SHOP PRIMER |
NCD 1435 EPOXY RED OXIDE SHOP PRIMER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Preliminary Examination
IS101 Part 1 /Sce 2 ,1987) |
500.0 |
|
| 2 (Relative consistency Efflux time immediately after mixing by
ford cup no 4 at 27+/-2 deg C in seconds
IS 101 Part 1 /Sce 2 ,1989) |
1200.0 |
|
| 3 (Application properties &
finish IS 101 Part 1 /Sce 2 ,1987) |
1200.0 |
|
| 4 (Drying time, hrs
a) Surface Dry
IS 101) |
500.0 |
|
| 5 (Drying time, hrs
a) Hard Dry
IS 101) |
500.0 |
|
| 6 (Flexibility and adhesion( 7 days
drying) IS 101 Part 5 /Sce 2 ,1988) |
1500.0 |
|
| 7 (Dry film thickness(DFT) , microns per coat
IS 101 Part 3 /Sce 2 ,1989) |
1500.0 |
|
| 8 (Flash point (mixed material ) in minutes
IS 101 Part 1 /Sce 6 ,1987) |
1500.0 |
|
| 9 (Pot life Hrs,
AS per APPENDIX A) |
1000.0 |
|
| 10 (Percent pigment
IS 101 Part 8 /Sce 2 1986) |
2500.0 |
|
| 11 (Percent volatile matter
,IS 101-1986 Part 2 /Sce 2) |
1500.0 |
|
| 12 (Weight in kg per ten litre
IS 101-1986 Part 1 /Sce 7) |
1500.0 |
|
| 13 (Resistance to corrosion under condition of condensation for a period of 14 days
( one coat on grit blasted MS panel) after 7 days of curing
IS 101 Part 6 /Sce 1 1988) |
4000.0 |
|
| 14 (Resistance to sea water under condition of cathodic protection
for 6 weeks APPENDIX C) |
10000.0 |
|
|
| 190 |
IS 1726 (1991) - Cast Iron Man Hole Covers and Frames |
Cast Iron Man Hole Covers and Frames |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Dimension of Man Hole covers) |
1000.0 |
|
| 7 (Dimension of Frames) |
1000.0 |
|
| 10 (Load Test) |
5000.0 |
|
|
| 191 |
P-6 B269-000-02-42-PCS-0001 Rev. 2 (-) - P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697
Air drying method )) |
2500.0 |
|
| 2 (Dry Film Thickness per coat,
microns) |
1000.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C) |
250.0 |
|
| 6 (Hard Dry Time in hrs @ 30°C) |
250.0 |
|
| 7 (Overcoating Intervals Hours) |
1000.0 |
|
| 8 (Pot Life for two components paint @ 30°C Hrs) |
1500.0 |
|
| 9 (Adhesion ASTM D 4541 MPa) |
5000.0 |
|
| 10 (Temperature Resistance at 80 Deg .C
Method A- ASTM D 2485) |
2500.0 |
|
|
| 192 |
Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024 |
Customized Specification for Paint Coatings NTH ER 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (PULL OF ADHESION ,MPa
ASTM D4541) |
3500.0 |
|
| 2 (HUMIDITY RESISTANCE FOR 2000 hrs
ASTM D4585) |
100000.0 |
|
| 3 (HUMIDITY RESISTANCE FOR 1000 hrs
ASTM D4585) |
50000.0 |
|
| 4 (SALT SPRAY TEST FOR 2000 hrs
ASTM B 117) |
100000.0 |
|
| 5 (UV RESISTANCE FOR 1000 hrs
(ASTM G 154) |
50000.0 |
|
| 6 (SALT SPRAY TEST FOR 5000 hrs
ASTM B 117) |
250000.0 |
|
| 7 (TENSILE STRENGTH, MPa
ASTM D 638) |
3000.0 |
|
| 8 (ELONGATION %
ASTM D 638) |
1000.0 |
|
| 9 (WATER IMMERSION TEST for 14 days) |
5000.0 |
|
| 10 (UV RESISTANCE FOR 500 hrs (ASTM G 154) |
25000.0 |
|
| 11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117) |
125000.0 |
|
| 12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117) |
50000.0 |
|
| 13 (Dry film Thickness(DFT),in microns) |
100.0 |
|
| 15 (Scratch hardness (at the load of 1000gm)
IS: 101 (part 5 / Sec 1) 1988
(Reaffirmed 2019)) |
1000.0 |
|
| 16 (Adhesion of film
ASTM 3359
(Circular Blade cross cut)
/IS:101.5.2.1988) |
2000.0 |
|
| 17 (Finish
IS:101 (Part 3/ sec 4) 1987
(Reaffirmed 2019)) |
1000.0 |
|
| 18 (Accelerated Weathering
QUV test for 240 hours) |
12000.0 |
|
| 19 (Resistance to petrol benzol mixture
(To pass 500g scratch hardness after the exposure)
jSS-8010-82:2012, Appendix - D) |
2000.0 |
|
| 20 (Resistance to warm
water at 45±3° C for 4 hours
jSS-8010-82:2012,Appx E) |
3500.0 |
|
| 21 (Accelerated storage
stability test at 60° C for 96 h
jSS-8010-82:2012, Appendix - C) |
3500.0 |
|
| 22 (RESISTANCE TO SALT WATER
JSS-8010-82:2012, Appendix - F) |
8000.0 |
|
| 23 (Resistance to LUBRICATING OIL
jSS-8010-82:2012, Appendix - A) |
5000.0 |
|
| 24 (Resistance to heat at 150° C
JSS-8010-82:2012, Appendix- B) |
3500.0 |
|
| 25 (Humidity test at 95% RH & 30ºC TO 60ºC for 72 hours
IS:101 part .6.1.1988.) |
3000.0 |
|
| 26 (QUV test for 822 hours
Test Condition:24 hours Cycle of 8 hrs UV to 60ºC and 4 hrs
condensations to 40ºC
ASTM G154, ASTM D
4587) |
42000.0 |
|
| 27 (Resistance to low Temperature at -40 +/- 0.1ºC
for 08 hrs) |
10000.0 |
|
| 28 (Protection against corrosion
for 48 Hours IS 101) |
2000.0 |
|
| 29 (Resistance to High Temperature at 120 ± 0.1°C
for 8 hours.) |
1000.0 |
|
| 30 (Chemical Resistance In detergent) |
2500.0 |
|
| 31 (Chemical Resistance
(Petroleum, Diesel, Acetone
solvent)
ASTM D 2792) |
5000.0 |
|
| 32 (Salt Spray Test ASTM B 117 for48 hours
101B/ IS 101.6.3.1990) |
1200.0 |
|
| 33 (Outdoor Durability Test 25 days
JSS-8010-82 2012.Annex G) |
20000.0 |
|
| 34 (Impact Resistance test
ASTM 2794-93) |
5000.0 |
|
| 35 (Adhesion test, MPa
(ASTM D4541)) |
3500.0 |
|
| 36 (Abrasion Resistance (ASTM D 4060)
1000g load/CS 17/1000 Cycle) |
4000.0 |
|
| 37 (Hardness) |
3000.0 |
|
| 38 (Flexibility
ASTM D 522)) |
1500.0 |
|
| 39 (Dry heat Resistance) |
3500.0 |
|
| 40 (Storage Stability) |
2500.0 |
|
| 41 (Keeping property) |
10000.0 |
|
| 42 (Gloss Value) |
600.0 |
|
| 43 (Dry Film Thickness (DFT)) |
600.0 |
|
| 45 (Flash Point in Deg c
(IS 101 part 1 sec 6)) |
1200.0 |
|
| 46 (Salt Spray test
for 480 hours
ASTM B 117/ISO 9227) |
24000.0 |
|
| 47 (Salt spray test
for 1440 hours
ASTM B117/ISO 9227) |
72000.0 |
|
| 48 (Corrosion/Salt Fog Test
ASTM B117
14 DAYS) |
16800.0 |
|
| 49 (color) |
1200.0 |
|
| 50 (Appearance) |
1200.0 |
|
| 51 (Accelerated Weathering Test (QUV) as per IS15489:2013
for 2000hrs) |
100000.0 |
|
|
| 193 |
IS 16098(Part 2) - STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE |
STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Outer Diameter(mm.)) |
1000.0 |
|
| - (Inner Diameter(mm.)) |
1000.0 |
|
| - (Wall Thickness(mm.)) |
1000.0 |
|
| - (Impact Test) |
2000.0 |
|
| - (Resistance to heating oven test) |
2000.0 |
|
| - (Ring Flexibility) |
2000.0 |
|
| Firm's request (Tensile Strength) |
2000.0 |
|
| Firm's request (Elongation) |
1000.0 |
|
| Firm's request (Hardness (Shore D)) |
1000.0 |
|
|
| 194 |
IS 16098 Part 2 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Joints-Elastomeric Sealing Rings) |
1000.0 |
|
| 8.2.2 (Impact Strength of Injection Moulded and Fabricated Fittings) |
1000.0 |
|
| 8.2.1 (Mechnical of Fittings-General) |
2000.0 |
|
| 8.1.2 (Mechnical of pipes-Ring Flexibility) |
2000.0 |
|
| 8.1.1 (Mechnical of pipes-General) |
2000.0 |
|
| 7.1 (Appearance and Color ) |
1000.0 |
|
| 6.3.5 (Wall Thickness) |
1000.0 |
|
| 6.3.4 (Dia and joining dimensions of sockets and spigots) |
1000.0 |
|
| 6.3.2 (Length) |
1000.0 |
|
| 6.3.1 (Diameter ) |
1000.0 |
|
| 5.1 (Base Density) |
1000.0 |
|
| 7.2 (Resistance to Heating (Oven Test)) |
2000.0 |
|
| 5.1 (Melt Flow Rate (Base Material)) |
2000.0 |
|
| 1 (Thermal Stability(OIT)) |
2000.0 |
|
| Firm's request (Tensile Strength) |
2000.0 |
|
| Firm's request (Elongation) |
1000.0 |
|
| Firm's request (Hardness (Shore D)) |
1000.0 |
|
| Firm's request (Density) |
1000.0 |
|
| Firm's request (Melting Point) |
1000.0 |
|
|
| 195 |
Custom - Powder of Quartzite lumps |
Powder of Quartzite lumps |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Fe2O3) |
1200.0 |
|
| 2 (SiO2) |
2000.0 |
|
|
| 196 |
NTH ER Paint 2024 (0) - NTH ER Paint 2024 |
NTH ER Paint 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Lead (as pb)
by AAS (ASTM D 3335)) |
700.0 |
|
| 2 (Cadmium (as Cd)
by AAS (ASTM D 3335)) |
700.0 |
|
| 3 (Chromium as Cr
By AAS(ASTM D 3718)) |
700.0 |
|
| 4 (Mercury as Hg)
by AAS (ASTM D 3624)) |
700.0 |
|
| 1 (Appearance) |
1200.0 |
|
|
| 197 |
15607 - BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION |
BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.4 (Density at 15 °C, kg/m3) |
1200.0 |
|
| 4.4 (Kinematic viscosity at 40 °C, cSt) |
1200.0 |
|
| 4.4 (Copper strip corrosion, 3 h at 50 °C, Max) |
1200.0 |
|
| 4.4 (Acid value, mg KOH/g, Max) |
1200.0 |
|
|
| 198 |
IS 3975 (1999) - Low carbon galvanized steel wires, formed wires and tapes for armouring of cables |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Sulphur) |
500.0 |
|
| 6.2 (Phosphorus) |
500.0 |
|
| 7 (Dimension) |
1000.0 |
|
| 8.1 (Tensile Strength) |
2000.0 |
|
| 8.2 (Torsion Test for round wire only) |
1000.0 |
|
| 8.3 (Wrapping Test) |
1000.0 |
|
| 8.4 (Resistance Test for round and formed wire) |
2000.0 |
|
| 9.1 (Mass of Zinc Coating) |
2000.0 |
|
| 9.2 (Uniformity of Coating) |
1000.0 |
|
| 9.3 (Adhesion Test) |
1000.0 |
|
| 11 (Freedom from defect) |
1000.0 |
|
| 8.1 (% Elongation) |
1000.0 |
|
|
| 199 |
11087. (1986) - Specification For Paper For Magnetic Ink Character Recognition Cheque Printing. |
Specification For Paper For Magnetic Ink Character Recognition Cheque Printing. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Description) |
1000.0 |
|
| 3.2 (Absence of Magnetizable Particles.) |
1000.0 |
|
| 3.3 (Substance) |
1000.0 |
|
| 3.4 (Thickness) |
1000.0 |
|
| 3.5 (Sizes) |
1000.0 |
|
| 3.6 (Smoothness) |
1000.0 |
|
| 3.6 (Porosity) |
1000.0 |
|
| 3.6 (Opacity) |
2000.0 |
|
| 3.6 (Wax pick) |
2000.0 |
|
| 3.6 (Tearing Strength) |
2000.0 |
|
| 3.6 (Stiffness) |
1000.0 |
|
| 3.9 (Chemical Sensitize Test) |
10000.0 |
|
| Firm's request (UV Sensitization Test (24 hrs)) |
1200.0 |
|
|
| 200 |
CUSTOMER SPECIFICATION PAINT LAB (0) - CUSTOMER SPECIFICATION PAINT LAB |
CUSTOMER SPECIFICATION PAINT LAB |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Salt spray test 24 hours, after 48 hours, after 72 hours ,after 96 hours &after 120 hours
I)Delta E Value (before Exposure)
II)Delta E Value (after Exposure)
III)Gloss Value (before Exposure)
iv) Gloss Value (after Exposure)) |
8000.0 |
|
| 2 (Rusting/corrosion test as per ASTM B-117
Test results after 24, 48, 72, 96 and 120 hours exposure of salt spray for rusting/corrosion evaluation) |
6000.0 |
|
| 3 (Salt Spray Test 96 hrs.) |
4800.0 |
|
| 4 (Dry film thickness) |
1200.0 |
|
| 5 (Cross hatch adhesion test) |
1500.0 |
|
| 6 (Impact resistance test) |
1500.0 |
|
| 7 (Pencil hardness test) |
1500.0 |
|
| 8 (Bend Test) |
1200.0 |
|
| 9 (Gloss) |
1200.0 |
|
| 10 (Salt Spray (ASTM B117)
100 hrs) |
5000.0 |
|
| 11 (Wasahbility and cleanibility) |
2000.0 |
|
| 12 (Drying Time (a) Surface dry) |
1200.0 |
|
| 13 (Drying time (b) Hard dry) |
1200.0 |
|
| 14 (Finish) |
1200.0 |
|
| 15 (VOC (%by mass)) |
3000.0 |
|
| 17 (Resistance to alkali) |
1500.0 |
|
| 18 (Accelerated storage stability) |
3000.0 |
|
|
| 201 |
12089 - SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT |
SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Manganese oxide) |
1200.0 |
|
| 3.2 (Magnesium oxide) |
1200.0 |
|
| 3.2 (Sulphide sulphur) |
1200.0 |
|
|
| 202 |
1654:1992 - Lead Antimony Alloys-Specification |
Lead Antimony Alloys-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Antimony) |
1200.0 |
|
| 5.1 (Lead) |
1200.0 |
|
| 5.1 (Arsenic) |
1200.0 |
|
| 5.1 (Tin) |
1200.0 |
|
| 5.1 (Copper) |
1200.0 |
|
| 5.1 (Bismuth) |
1200.0 |
|
| 5.1 (Iron) |
1200.0 |
|
| 5.1 (Zinc) |
1200.0 |
|
| 5.1 (Silver) |
1200.0 |
|
|
| 203 |
CUSTOM - Mineral Wool |
Mineral Wool |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Shot Content) |
2000.0 |
|
|
| 204 |
4276 - Soyabean Oil- Specification |
Soyabean Oil- Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.7 (Moisture and Insoluble impurities) |
1200.0 |
|
| 5.7 (Colour on the Lovibond scale, expressed as (Y + 5R)) |
1200.0 |
|
| 5.7 (Refractive index at 40ºC) |
1200.0 |
|
| 5.7 (Saponification value) |
1200.0 |
|
| 5.7 (Iodine value (Wijs)) |
1200.0 |
|
| 5.7 (Acid value, Max) |
1200.0 |
|
| 5.7 (Unsaponifiable matter,) |
1200.0 |
|
|
| 205 |
IS 16353 (2015) - Portland Cement Clinker - Specification |
Portland Cement Clinker - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Insoluble residue) |
600.0 |
|
| 5 (Total loss on ignition) |
600.0 |
|
| 5 (Alkali content expressed as sodium oxide(Na2O)) |
1200.0 |
|
| 5 (Magnesia) |
600.0 |
|
| 5 (Chloride content) |
500.0 |
|
| 5 (Free lime) |
600.0 |
|
| 5 (Total Sulphur content calculated as sulphuric anhydride(SO3)) |
500.0 |
|
| 5 (C3S + C2S) |
600.0 |
|
| 5 (C3A) |
600.0 |
|
| 5 (C3S) |
600.0 |
|
| 5 (Ratio of percentage of alumina to that of iron oxide) |
600.0 |
|
| 5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
600.0 |
|
|
| 206 |
F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre of mix paint) |
1200.0 |
|
| 5 (Touch Dry @ 30°C in Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1500.0 |
|
| 8 (Overcoating Intervals Hours) |
1200.0 |
|
| 9 (Pot Life in Hrs) |
1200.0 |
|
| 10 (Adhesion ASTM D 4541 in Mpa) |
3500.0 |
|
| 11 (Temperature Resistance (at 150 Deg C ASTM D 2485 (Method A)) |
1500.0 |
|
|
| 207 |
F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1200.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C ; Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C in hours) |
1000.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life) |
1500.0 |
|
| 10 (Adhesion ASTM D 4541 Mpa) |
3500.0 |
|
| 11 (Tensile Strength ( ASTM D638) N/mm2) |
5000.0 |
|
| 12 (Temperature Resistance (at 90 Deg C ASTM D 2485 Method A) |
2500.0 |
|
|
| 208 |
F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION |
F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat in microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in; Hours) |
500.0 |
|
| 7 (Overcoating Intervals Hours) |
1500.0 |
|
| 8 (Pot Life) |
1200.0 |
|
| 9 (Adhesion ASTM D 4541) |
3500.0 |
|
| 10 (MEK rub test ASTM D4752) |
1500.0 |
|
| 11 (% Zinc Content on dry film) |
2000.0 |
|
| 12 (Temperature Resistance at 400 Deg C ASTM D 2485 Method B) |
1500.0 |
|
|
| 209 |
F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1200.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1200.0 |
|
| 4 (weight per litre in Kg/litre) |
1200.0 |
|
| 5 (Touch Dry @ 30°C) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1200.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life in hours) |
1500.0 |
|
| 10 (Adhesion ASTM D 4541) |
3500.0 |
|
| 11 (Temperature Resistance at 80Deg C
Method A ASTM D 2485) |
1500.0 |
|
|
| 210 |
F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2
SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM -
NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697 Air drying method )) |
1500.0 |
|
| 2 (Dry Film Thickness per coat, microns) |
1300.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1000.0 |
|
| 4 (weight per litre in Kg/litre) |
1000.0 |
|
| 5 (Touch Dry @ 30°C in Hours) |
500.0 |
|
| 6 (Hard Dry Time @ 30°C in Hours) |
500.0 |
|
| 7 (Full Cure @ 30°C) |
1500.0 |
|
| 8 (Overcoating Intervals Hours) |
1500.0 |
|
| 9 (Pot Life in hours) |
1000.0 |
|
| 10 (Adhesion ASTM D 4541) |
3500.0 |
|
| 11 (Temperature Resistance at 80 Deg C
ASTM D 2485 Method A) |
2500.0 |
|
|
