NTH - Management Information System

National Test House (ER), Alipore

Kolkata, Kolkata, West Bengal, 700027

- ssingh1[at]nth[dot]gov[dot]in

Scope List

Reset

220 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

211

IS 2026 : Part 1 (2011) - Power Transformers: Part 1 General (Second Revision)

Power Transformers: Part 1 General (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1.2(a) (Temp Rise)	7000.0
10.1.3(d) (Measurement of Zero phase sequence impedance for 3 Phase transformer)	3000.0
10.1.1(a) (Windlng Resistance)	1600.0
10.1.1(b) (Voltage ratio & Phase Displacement)	3200.0
10.1.3(g) (Measurement of Hormonices of the no load current)	10000.0
10.1.1(d) (No Load loss and current)	9600.0
10.1.3(j) (Measurement of Insulation Resistance)	2400.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	3000.0
10.1.1(e) (Induced Overvoltage)	6400.0
10.1.3 (f) (Noise Level)	10000.0
10.1.1(e) (AC voltage withstand test)	4000.0
10.1.1 (C) (% impedance and load loss)	12800.0
17.3.2 (a) of CBIP Pub. No. 317 (Vacuum Test - Type (Deflection))	10000.0
17.3.2 (b) of CBIP Pub. No. 317 (Oil Leakage Test (Pressure Test - Type))	10000.0
7 (Rating Plate Details)	-
7 (As per Specification)	-
CBIP Publication no. 317 (Polarization Index Test)	2500.0
CBIP Publication no. 317 (Measurement of Unbalance Current)	5000.0

212

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

213

IS 2932 (2013) - Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing

Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

214

SLS 1126.1-2020 - Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4.2,9.10 (Cranking performance for dry charge batteries)	15000.0
9.1 (1st 20 h capacity Test)	25000.0
9.2 (1st Reserve Capacity Test)	20000.0
9.3.1 (cranking performance test)	20000.0
9.6.1.1 (Corrosion Test)	15000.0
9.6.2 (Endurance in cycle test)	45000.0
9.5 (charge retention test)	20000.0
9.4 (Charge Acceptance Test)	15000.0
9.9 (Electrolyte Retention Test)	10000.0
9.8 (Vibration Resistance Test)	15000.0
9.7 (Water consumption Test)	15000.0
9.6.1.2 (Endurance in cycle test)	55000.0

215

JIS D 5302-2004 - Lead Acid Batteries for Motorcycles

Lead Acid Batteries for Motorcycles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.2 (Capacity (10 hour rate) for 1 sample)	10000.0
8.3.3 (High Rate Discharge for 1 sample)	10000.0
8.3.4 (Vibration resistance)	10000.0
Reference 1 (Heavy Load Life Duration)	60000.0
Reference 2 (Shallow Cycle Endurance)	60000.0
Reference 3 (Characteristics of Electrolyte Decrease)	30000.0
Reference 4 (Storage Characteristic Feature Test)	20000.0

216

IS 1652 (2013) - Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Verification of Constructional Requirements)	5000.0
7 (Verification of Marking)	2000.0
6.1 (Verification of Dimensions)	3000.0
10.6 (Test for Capacity)	25000.0
10.11 (Test for Voltage during Discharge)	10000.0
10.10 (Ampere-hour and watt hour efficiency test)	10000.0
10.8 (Test for loss of Capacity on Storage)	10000.0
10.9 (Endurance Test)	90000.0
10.12 (Loss of water test)	10000.0
10.13 (Test for suitability of floating battery operation)	10000.0
10.14 (Short circuit & Internal Resistance Test)	15000.0
- (Witness for Endurance Test)	13000.0

217

IS 13369 (1992) - Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2 (Verification of Constructional Requirements)	20000.0
11.3 (Verification of Marking)	1000.0
11.4 (Verification of Dimensions)	1000.0
11.5 (Test for Capacity)	20000.0
11.8 (Ampere-hour and watt hour efficiency test)	10000.0
11.6 (Test for loss of Capacity on Storage)	10000.0
11.7 (Endurance Test)	45000.0
11.9 (Water loss test)	10000.0
11.1 (Equilibrium Float current test)	10000.0
11.5 (Test for Capacity at -13 deg C to -15 deg C)	20000.0

218

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	20000.0
21.3(b) (Temperatur Rise Test)	40000.0
21.2(g) (Separate Source AC voltage withstand test)	2500.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship)	2000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load))	8000.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	4000.0
21.4(a) (Determination of sound levels)	7000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection)	20000.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	20000.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	5000.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	15000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
N.A. (Unbalance Current)	5000.0

219

Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore

Customer Specification NTH ER Electrical Alipore

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Customer Specification NTH ER Electrical Alipore)	5000.0
2 (Customer Specification NTH ER Electrical Alipore)	10000.0
3 (Customer Specification NTH ER Electrical Alipore)	15000.0
4 (Customer Specification NTH ER Electrical Alipore)	20000.0
5 (Customer Specification NTH ER Electrical Alipore)	25000.0
6 (Customer Specification NTH ER Electrical Alipore)	30000.0
7 (Customer Specification NTH ER Electrical Alipore)	35000.0
8 (Customer Specification NTH ER Electrical Alipore)	40000.0
9 (Customer Specification NTH ER Electrical Alipore)	45000.0
10 (Customer Specification NTH ER Electrical Alipore)	50000.0
11 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	55000.0
12 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	60000.0
13 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	65000.0
14 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	70000.0
15 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	75000.0
16 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	80000.0
17 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	85000.0
18 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	90000.0
19 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	95000.0
20 (Customer Specification NTH ER Electrical Alipore - Customer Specification NTH ER Electrical Alipore)	100000.0
21 (Customer Specification NTH ER Electrical Alipore)	110000.0
22 (Customer Specification NTH ER Electrical Alipore)	120000.0
23 (Customer Specification NTH ER Electrical Alipore)	130000.0
24 (Customer Specification NTH ER Electrical Alipore)	140000.0
25 (Customer Specification NTH ER Electrical Alipore)	150000.0
26 (Customer Specification NTH ER Electrical Alipore)	160000.0
27 (Customer Specification NTH ER Electrical Alipore)	170000.0
28 (Customer Specification NTH ER Electrical Alipore)	180000.0
29 (Customer Specification NTH ER Electrical Alipore)	190000.0
30 (Customer Specification NTH ER Electrical Alipore)	200000.0

220

IS 1651 (2013) - Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.2 (Verification of Constructional Requirements)	5000.0
12.3 (Verification of Marking)	2000.0
12.4 (Verification of Dimensions)	3000.0
12.5 (Capacity)	25000.0
12.10 (Test for Voltage during Discharge)	10000.0
12.9 (Ampere-hour and watt hour efficiency test)	10000.0
12.7 (Test for loss of Capacity on Storage)	10000.0
12.8 (Endurance Test)	90000.0
12.11 (Water loss test)	10000.0
12.12 (Test for suitability of floating battery operation)	10000.0
12.13 (Short circuit & Internal Resistance Test)	15000.0
12.13 (Short circuit & Internal Resistance Test(Current more than 1000 Amps))	15000.0