| 931 |
National Test House (ER), Kolkata
| BP 22494 Rev No. 07 - Epoxy Glass Mat Laminated Sheets & Components Fire Retardant. |
Epoxy Glass Mat Laminated Sheets & Components Fire Retardant. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Specific Gravity) |
1000.0 |
|
| 9.1 (Tensile Strength) |
2000.0 |
|
| 9.2 (Cross Breaking Strength) |
2000.0 |
|
| 9.4 (Compression Strength - Proof) |
2000.0 |
|
| 9.5 (Splitting Load) |
2000.0 |
|
| 8.3 (Specific Gravity) |
1000.0 |
|
| 9.1 (Tensile Strength) |
2000.0 |
|
| 9.2 (Cross Breaking Strength) |
2000.0 |
|
| 9.4 (Compression Strength - Proof) |
2000.0 |
|
| 9.5 (Splitting Load) |
2000.0 |
|
|
| 932 |
National Test House (NR), Ghaziabad
| IS 15450 (2022) - Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification |
Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 9.1 (Table 2) (Outside Diameter) |
500.0 |
|
| Clause 9.1 (Table 2) (Out of Roundness) |
500.0 |
|
| Clause 9.1 (Table 2) (Wall Thickness) |
500.0 |
|
| Clause 9.1 (Table 2) (Outer PE Layer Thickness) |
500.0 |
|
| 9.3 (Length of Pipe) |
500.0 |
|
| 10 (Visual Appearance) |
1000.0 |
|
| 11.1 (Density @27°C) |
1000.0 |
|
| 11.2 (Melt Flow Rate) |
2000.0 |
|
| 11.3 (Overall Migration) |
5000.0 |
|
| 11.4 (Oxidation Induction Time) |
2000.0 |
|
| 11.5 (Carbon Black Content) |
2000.0 |
|
| 11.5 (Carbon Black Dispersion) |
1000.0 |
|
| 11.9 (Apparent Tensile Strength) |
5000.0 |
|
| 11.10 (Burst Pressure Test) |
2000.0 |
|
| 11.11.1 (Short Term Hydrostatic Test) |
5000.0 |
|
| 11.11.2 (Long Term Hydrostatic Test) |
5000.0 |
|
|
| 933 |
National Test House (WR), Mumbai
| IS 12701:1996 - Rotational Moulded Polyethylene Water Storage Tanks |
Rotational Moulded Polyethylene Water Storage Tanks |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| As per table 1 (Minimum Bottom Thickness) |
1000.0 |
|
| As per table 1 (Minimum Wall Thickness) |
1000.0 |
|
| 5.4 (Wall Thickness above effective height) |
1000.0 |
|
| 7.2 (Resistance to Impact) |
2000.0 |
|
| 7.4 (Tensile Strength) |
2000.0 |
|
| 7.5 (Flexural Modulus) |
2000.0 |
|
| 7.1 (Resistance to deformation) |
2000.0 |
|
|
| 934 |
National Test House (WR), Mumbai
| AAR (1994) - Clean Silica Sand |
Clean Silica Sand |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Test for presence of impurities (Clay, looms, mica and other foreign matters)) |
500.0 |
|
| 2.1 (Solubility in HCl in 24 hours, %) |
1000.0 |
|
| 2.1.1 (Determination of Silica, %) |
2000.0 |
|
| 3.1 (Caking Test) |
1000.0 |
|
| 3.2 (Gradation Test, % passing) |
2000.0 |
|
|
| 935 |
National Test House (WR), Mumbai
| Customized Specification For APP Modified Bituminous Sheet Membrane - Customized Specification For APP Modified Bituminous Sheet Membrane |
Customized Specification For APP Modified Bituminous Sheet Membrane |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Thickness as per EN 1849-1) |
1000.0 |
|
| - (Tensile Strength in Transverse Direction as per EN 12311-1) |
2000.0 |
|
| - (Elongation in Longitudinal Direction as per EN 12311-1) |
1000.0 |
|
| - (Elongation in Transverse Direction as per EN 12311-1) |
1000.0 |
|
| - (Tear Strength in Longitudinal direction as per ASTM D 5147) |
2000.0 |
|
| - (Tear Strength in Transverse direction as per ASTM D 5147) |
2000.0 |
|
| - (Softening Point as per ASTM D 36) |
2000.0 |
|
| - (Flexibility at low temperature(-2deg. C) as per EN 1109) |
2000.0 |
|
| - (Flow resistance @120 deg.C after 2 hours as per EN 1110) |
2000.0 |
|
| - (Water absorption as per ASTM D 5147) |
2000.0 |
|
|
| 936 |
National Test House (WR), Mumbai
| Customized Specification for General Purpose Silicon Sealant - Customized Specification for General Purpose Silicon Sealant |
Customized Specification for General Purpose Silicon Sealant |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Density at 25 Deg.C in gm./cc.) |
1000.0 |
|
| - (Tensile Strength(Kg./cm2)) |
2000.0 |
|
| - (Elongation at Break(%)) |
2000.0 |
|
| - (Shore A Hardness) |
2000.0 |
|
| - (Dielectric Strength) |
3000.0 |
|
|
| 937 |
National Test House (NER), Guwahati
| IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Nominal Mass of strand - IS 14268: 2022.) |
1500.0 |
|
| 6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.) |
1000.0 |
|
| 6.1 (Nominal Diameter of strand- IS 14268: 2022.) |
1000.0 |
|
| 6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
1000.0 |
|
| 6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
3000.0 |
|
| 6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.) |
1000.0 |
|
| 6.2 (Length of lay of Strand- IS 14268: 2022.) |
1000.0 |
|
| 4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.) |
1000.0 |
|
| 4.1.2 (Carbon (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Sulphur (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Phosphorus (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (NIckel (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Chromium (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Manganese (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Silicon (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Copper (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Molybdenum (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Aluminium (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018)) |
500.0 |
|
| 6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.) |
1000.0 |
|
|
| 938 |
National Test House (NWR), Jaipur
| IS 1239 : Part 1 (2004) - Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1.1 (Chemical composition (Carbon)) |
625.0 |
|
| 6.1.1 (Chemical composition (Manganese)) |
625.0 |
|
| 6.1.1 (Chemical composition (Sulphur)) |
625.0 |
|
| 6.1.1 (Chemical composition (Phosphorus)) |
625.0 |
|
| 12 (Galvanizing (Mass of Zinc coating)) |
2000.0 |
|
| 12 (Galvanizing (Uniformity of Zinc coating)) |
1000.0 |
|
| 14.2 (Bend test on tube (upto and including 50 mm NB)) |
1000.0 |
|
| 8.1 (Mass per meter) |
1000.0 |
|
| 8 (Dimension (Outside diameter), mm.) |
1000.0 |
|
| 8 (Dimensions (Thickness), mm.) |
1000.0 |
|
| 14.1.1(b)(1) (% Elongation) |
1000.0 |
|
| 14.3 (Flattening Test on tube above 50 mm NB) |
1000.0 |
|
| 14.1 (Tensile Strength) |
2000.0 |
|
| 14.1.1 (% Elongation on gauge length of 5.65 x Sq. root area) |
1000.0 |
|
| 14.1.1(a) (% Elongation) |
1000.0 |
|
| 6.1.1 (Chemical composition (As per annexure)) |
3000.0 |
|
|
| 939 |
National Test House (NR), Ghaziabad
| IS 1397 (2020) - Kraft Paper for Packing and Wrapping — Specification ( Third Revision ) |
Kraft Paper for Packing and Wrapping — Specification ( Third Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5 (Moisture Content) |
1000.0 |
|
| 5.5 (pH) |
1000.0 |
|
| 5.5 (Burst Index) |
2000.0 |
|
| 5.5 (Tear Index(MD)) |
1000.0 |
|
| 5.5 (Tear Index (CD)) |
1000.0 |
|
| 5.5 (Tensile Index (MD)) |
1000.0 |
|
| 5.5 (Tensile Index(CD)) |
1000.0 |
|
| 5.5 (Folding Endurance) |
1500.0 |
|
| 5.5 (Cobb Test) |
1000.0 |
|
| 5.5 (Cobb Test) |
1000.0 |
|
|
| 940 |
National Test House (WR), Mumbai
| IS 17545:2021 - WHITE CEMENT BASED POLYMERIC PUTTY |
WHITE CEMENT BASED POLYMERIC PUTTY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Form and Condition) |
500.0 |
|
| 4.3 (Consistency) |
500.0 |
|
| 4.4 (Lead Restriction-ASTM D3335-85a.) |
1000.0 |
|
| 4.5 Table, 1, (i) (Average Tensile adhesion strength@ 14days-Annex B) |
2000.0 |
|
| 4.5, Table 1, (ii) (Water retentivity-Annex C) |
1000.0 |
|
| 4.5, Table 1, (iii) (Initial Setting time-Annex D) |
250.0 |
|
| 4.5, Table 1, (iii) (Final Setting time-Annex D) |
250.0 |
|
| 4.5, Table 1, (iv) (Polymer content(based on loss on ignition)-Annex E) |
1000.0 |
|
| 4.5, Table 1, (v) (Degree of whiteness-Annex B of IS 8042) |
2000.0 |
|
| 4.5, Table 1, (vi) (Cement content-Annex B of IS 5410) |
1000.0 |
|
| 4.6 Table 2 (28 days Compressive strength-IS 4031(6)) |
1000.0 |
|
| custom (Potlife) |
1000.0 |
|
| 4.5 Table 1,V (Degree of whiteness) |
1500.0 |
|
| custom (Fineness) |
1000.0 |
|
| custom (Bulk density) |
1000.0 |
|
| custom (Water absorption) |
1000.0 |
|
|
| 941 |
National Test House (NER), Guwahati
| 15388 (2003) - Silica Fume Specification (Custom requirements) |
Silica Fume Specification (Custom requirements) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4, Table 1(i) (Silica SiO2 (IS 1727), percent by mass) |
2000.0 |
|
| 4, Table 1(ii) (Moisture Content, percent by mass) |
800.0 |
|
| 4, Table 1(iii) (Loss on ignition (IS 1727), percent by mass) |
1000.0 |
|
| 4, Table 1(iv) (Alkalies as Na2O, (IS 4032), percent) |
1000.0 |
|
| 5, Table 2(ii) (Oversize particle retained on 45 micron IS sieve (IS 1727), percent) |
1000.0 |
|
| 5, Table 2(iv) (Compressive Strength at 7 days as per cent of control sample (IS 1727), %) |
3000.0 |
|
| - - (Specific Gravity [IS 2386(Part 3)]) |
1000.0 |
|
| - - (Bulk Density [IS 2386 (Part 3)], g/cc) |
1000.0 |
|
|
| 942 |
National Test House (WR), Mumbai
| IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY |
WHITE CEMENT BASED POLYMERIC PUTTY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (FORM &CONDITION) |
100.0 |
|
| 4.3 (Consistency) |
100.0 |
|
| 4.4 (Lead Restriction ( as metallic lead)) |
1000.0 |
|
| 4.5 Table 1(i) (Tensile adhesion strength (avg. of min 3 readings)
@14 days, N/mm2,) |
2500.0 |
|
| 4.5 Table 1(ii) (Water retentivity, percent) |
1000.0 |
|
| 4.5 Table 1(iii) (Initial Setting time-Annex D in minutes) |
200.0 |
|
| 4.5 Table 1(iii) (Final Setting time-Annex D
in minutes) |
200.0 |
|
| 4.5 Table 1(iv) (Polymer content (based on loss on ignition), percent by mass) |
1000.0 |
|
| 4.5 Table 1(vi) (Cement content, percent
Annex B of IS 5410) |
1200.0 |
|
| 4.6 Optional requirement (Compressive strength, 28 days in N/mm2
(IS 4031 (Part 6))) |
3000.0 |
|
| 4.5 Table 1(v) (Degree of whiteness, percent) |
1200.0 |
|
|
| 943 |
National Test House (WR), Mumbai
| Customized Specification for Waste Container(Dust Bin)(Dust Bin) - Customized Specification for Waste Container(Dust Bin) |
Customized Specification for Waste Container(Dust Bin) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Material Identification) |
2000.0 |
|
| - (Tensile Strength at Break as per ASTM D 638) |
2000.0 |
|
| - (Elongation at Break as per ASTM D 638) |
2000.0 |
|
| - (Volume capacity(Ltrs)) |
1000.0 |
|
| - (Density as per ASTM D 792) |
1000.0 |
|
| - (Ball Drop test @ 1Kg. from 0.3 M height(3times at different locations)on the lines of IS 12701:1996) |
2000.0 |
|
|
| 944 |
National Test House (WR), Mumbai
| None - Association of American Railboard ( Silica Sand) |
Association of American Railboard ( Silica Sand) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Solubility) |
1000.0 |
|
| - (Silica content) |
1500.0 |
|
|
| 945 |
National Test House (WR), Mumbai
| 1865 (1991) - Iron Castings with Spheroidal or Nodular Graphite- Specification |
Iron Castings with Spheroidal or Nodular Graphite- Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.1 (Tensile Strength as per IS 1608 Part 1 or relevant standard test method) |
1000.0 |
|
| 12.1 (0.2 percent proof stress ( Grade Specified in Table 1 of IS 1865) - Test method as per IS 1608 Part-1) |
1000.0 |
|
| 12.1 (Percentage of Elongation ( Grade Specified in Table 1 of IS 1865) - Test Method as per IS 1608 Pat-1) |
1000.0 |
|
| 12.2 (Impact Test carried out V-Notch Charpy Test as per IS 1757 ( Clause 12.2.1, 12.2.2. and 13.3.1 Table 3 and 4 of IS 1865)) |
5000.0 |
|
| 13.2 (Brinell Hardness Test as per IS 1500 Part-1 ( Specified in Annexure-A of IS 1865)) |
2000.0 |
|
| A-5 (Microstructure as per IS 7754 ( Specification in Annexure A-5 of IS 1865)) |
3500.0 |
|
| 6 (Visual Examination as per IS 1865, Clause.61. and 6.2 with customer specified drawing) |
1000.0 |
|
| 8 (Visual Examination as per IS 1865 Cl.8.1 and 8.2) |
1000.0 |
|
| 0 (Dimension Measurement of Cast and Finished Product as per customer specified drawing with tolerances) |
1000.0 |
|
| 0 (Visual Examination of Finished Product as per customer specification) |
1000.0 |
|
|
| 946 |
National Test House (NR), Ghaziabad
| IRC SP 81 (2008) - Tentative Specification for Slurry Seal and Micro surfacing |
Tentative Specification for Slurry Seal and Micro surfacing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 3 (Gradation) |
2000.0 |
|
| Table 2 (Water Absorption) |
1000.0 |
|
| Table 2 (Soundness with Sodium Sulphate) |
2000.0 |
|
|
| 947 |
National Test House (WR), Mumbai
| None - Custom- Non Flammable Adhesive (Gen Chem) |
Custom- Non Flammable Adhesive (Gen Chem) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Consistency) |
1000.0 |
|
| - (Coverage) |
1000.0 |
|
| - (Odour) |
500.0 |
|
| - (Wet Strength) |
4500.0 |
|
| - (Shear Strength) |
4500.0 |
|
| - (Fire Resistance) |
3000.0 |
|
| - (Drying Time) |
1000.0 |
|
| - (Colour) |
500.0 |
|
|
| 948 |
National Test House (NR), Ghaziabad
| IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Breaking Force of Single Wire) |
2000.0 |
|
| 7 (Freedom from defect) |
1000.0 |
|
| 4 (Sulphur) |
500.0 |
|
| 4 (Phosphorus) |
500.0 |
|
| 8.1 (Wrapping Test of wire) |
1000.0 |
|
| 9.1 (Breaking Force of Strand) |
3000.0 |
|
| 9.1 (Elongation of Strand) |
1000.0 |
|
| 8.1 (Wire Diameter) |
1000.0 |
|
| 9.2 (Mass of Zinc Coating) |
2000.0 |
|
|
| 949 |
National Test House (ER), Kolkata
| NCD 1435 (-) - NCD 1435 EPOXY RED OXIDE SHOP PRIMER |
NCD 1435 EPOXY RED OXIDE SHOP PRIMER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Preliminary Examination
IS101 Part 1 /Sce 2 ,1987) |
500.0 |
|
| 2 (Relative consistency Efflux time immediately after mixing by
ford cup no 4 at 27+/-2 deg C in seconds
IS 101 Part 1 /Sce 2 ,1989) |
1200.0 |
|
| 3 (Application properties &
finish IS 101 Part 1 /Sce 2 ,1987) |
1200.0 |
|
| 4 (Drying time, hrs
a) Surface Dry
IS 101) |
500.0 |
|
| 5 (Drying time, hrs
a) Hard Dry
IS 101) |
500.0 |
|
| 6 (Flexibility and adhesion( 7 days
drying) IS 101 Part 5 /Sce 2 ,1988) |
1500.0 |
|
| 7 (Dry film thickness(DFT) , microns per coat
IS 101 Part 3 /Sce 2 ,1989) |
1500.0 |
|
| 8 (Flash point (mixed material ) in minutes
IS 101 Part 1 /Sce 6 ,1987) |
1500.0 |
|
| 9 (Pot life Hrs,
AS per APPENDIX A) |
1000.0 |
|
| 10 (Percent pigment
IS 101 Part 8 /Sce 2 1986) |
2500.0 |
|
| 11 (Percent volatile matter
,IS 101-1986 Part 2 /Sce 2) |
1500.0 |
|
| 12 (Weight in kg per ten litre
IS 101-1986 Part 1 /Sce 7) |
1500.0 |
|
| 13 (Resistance to corrosion under condition of condensation for a period of 14 days
( one coat on grit blasted MS panel) after 7 days of curing
IS 101 Part 6 /Sce 1 1988) |
4000.0 |
|
| 14 (Resistance to sea water under condition of cathodic protection
for 6 weeks APPENDIX C) |
10000.0 |
|
|
| 950 |
National Test House (WR), Mumbai
| BS 204 :2001 (2001) - Classification of Thermoplastic Wood Adhesives for Non-Structural Application |
Classification of Thermoplastic Wood Adhesives for Non-Structural Application |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 2, Sl. No. 1 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm.) |
4000.0 |
|
| Table 2, Sl. No. 1 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm.) |
4000.0 |
|
| Table 2, Sl. No. 2 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 3 hr followed by 7 days at Std Atmosphere)) |
5000.0 |
|
| Table 2, Sl. No. 2 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 3 hr followed by 7 days at Std Atmosphere)) |
5000.0 |
|
| Table 2, Sl. No. 3 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days)) |
5000.0 |
|
| Table 2, Sl. No. 3 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days)) |
5000.0 |
|
| Table 2, Sl. No. 4 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days followed by 7 days in Std Atmosphere)) |
5000.0 |
|
| Table 2, Sl. No. 4 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in water at 20 +/- 5 Deg for 4 days followed by 7 days in Std Atmosphere)) |
5000.0 |
|
| Table 2, Sl. No. 5 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thin Bond Line, in N/sq mm. (After conditioning in boiling water for 3 hr followed by 2 hr in water at 20 +/- 5 Deg C).) |
6000.0 |
|
| Table 2, Sl. No. 5 (Tensile Shear Strength of Lap Joints (Adhesion Strength) for Thick Bond Line, in N/sq mm. (After conditioning in boiling water for 3 hr followed by 2 hr in water at 20 +/- 5 Deg C).) |
6000.0 |
|
|
| 951 |
National Test House (WR), Mumbai
| IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Freedom from defect) |
1000.0 |
|
| 8.1 (Wrapping Test of wire) |
1000.0 |
|
| 9.1 (Breaking Force of Strand) |
3000.0 |
|
| 9.1 (Elongation of Strand) |
1000.0 |
|
| 8.1 (Wire Diameter) |
1000.0 |
|
| 9.2 (Mass of Zinc Coating) |
2000.0 |
|
| 4 (Sulphur) |
500.0 |
|
| 4 (Phosphorus) |
500.0 |
|
|
| 952 |
National Test House (NR), Ghaziabad
| IS 15058 (2002) - PVC WATER-STOPS AT TRANSVERSE CONTRACTION JOINTS FOR USE IN MASONRY AND CONCRETE DAMS |
PVC WATER-STOPS AT TRANSVERSE CONTRACTION JOINTS FOR USE IN MASONRY AND CONCRETE DAMS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dimensions) |
1000.0 |
|
| Table-1 (Tensile Strength) |
1000.0 |
|
| Table-1 (Elongation) |
1000.0 |
|
| Table-1 (Hardness) |
1000.0 |
|
| Table-1 (Water Absorption) |
1000.0 |
|
| Table-1 (Cold Bend Temperature at which sample doesn't crack) |
1000.0 |
|
| Table-1 (Accelerated Extraction Test, Tensile Strength) |
1500.0 |
|
| Table-1 (Accelerated Extraction Test, Elongation) |
1500.0 |
|
| S.No. vii(a) of Table-1 (Weight Increase at 7 days) |
1000.0 |
|
| S.No. vii(b) of Table-1 (Weight decrease at 7 days) |
1000.0 |
|
| S.No. vii(c) of Table-1 (Change in Hardness at 7 days) |
1000.0 |
|
| S.No. vii(d) of Table-1 (Weight increase at 28 days) |
1000.0 |
|
| S.No. vii(e) of Table-1 (Weight decrease at 28 days) |
1000.0 |
|
| S.No. vii(f) of Table-1 (Dimension Change) |
2000.0 |
|
|
| 953 |
National Test House (SR), Chennai
| CUS/SR/CH/CPWD-Chennai - Custom standard for Sulphates in Ground Water and Soil |
Custom standard for Sulphates in Ground Water and Soil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test results (Borehole 1)) |
13000.0 |
|
| 2 (Test results (Borehole 2)) |
13000.0 |
|
|
| 954 |
National Test House (ER), Kolkata
| IS 1726 (1991) - Cast Iron Man Hole Covers and Frames |
Cast Iron Man Hole Covers and Frames |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Dimension of Man Hole covers) |
1000.0 |
|
| 7 (Dimension of Frames) |
1000.0 |
|
| 10 (Load Test) |
5000.0 |
|
|
| 955 |
National Test House (ER), Kolkata
| P-6 B269-000-02-42-PCS-0001 Rev. 2 (-) - P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
P-6 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume of Solids % (ASTMD 2697
Air drying method )) |
2500.0 |
|
| 2 (Dry Film Thickness per coat,
microns) |
1000.0 |
|
| 3 (Theoretical coverage m2/litre/coat) |
1500.0 |
|
| 4 (weight per litre in Kg/litre) |
1500.0 |
|
| 5 (Touch Dry @ 30°C) |
250.0 |
|
| 6 (Hard Dry Time in hrs @ 30°C) |
250.0 |
|
| 7 (Overcoating Intervals Hours) |
1000.0 |
|
| 8 (Pot Life for two components paint @ 30°C Hrs) |
1500.0 |
|
| 9 (Adhesion ASTM D 4541 MPa) |
5000.0 |
|
| 10 (Temperature Resistance at 80 Deg .C
Method A- ASTM D 2485) |
2500.0 |
|
|
| 956 |
National Test House (ER), Kolkata
| Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024 |
Customized Specification for Paint Coatings NTH ER 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (PULL OF ADHESION ,MPa
ASTM D4541) |
3500.0 |
|
| 2 (HUMIDITY RESISTANCE FOR 2000 hrs
ASTM D4585) |
100000.0 |
|
| 3 (HUMIDITY RESISTANCE FOR 1000 hrs
ASTM D4585) |
50000.0 |
|
| 4 (SALT SPRAY TEST FOR 2000 hrs
ASTM B 117) |
100000.0 |
|
| 5 (UV RESISTANCE FOR 1000 hrs
(ASTM G 154) |
50000.0 |
|
| 6 (SALT SPRAY TEST FOR 5000 hrs
ASTM B 117) |
250000.0 |
|
| 7 (TENSILE STRENGTH, MPa
ASTM D 638) |
3000.0 |
|
| 8 (ELONGATION %
ASTM D 638) |
1000.0 |
|
| 9 (WATER IMMERSION TEST for 14 days) |
5000.0 |
|
| 10 (UV RESISTANCE FOR 500 hrs (ASTM G 154) |
25000.0 |
|
| 11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117) |
125000.0 |
|
| 12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117) |
50000.0 |
|
| 13 (Dry film Thickness(DFT),in microns) |
100.0 |
|
| 15 (Scratch hardness (at the load of 1000gm)
IS: 101 (part 5 / Sec 1) 1988
(Reaffirmed 2019)) |
1000.0 |
|
| 16 (Adhesion of film
ASTM 3359
(Circular Blade cross cut)
/IS:101.5.2.1988) |
2000.0 |
|
| 17 (Finish
IS:101 (Part 3/ sec 4) 1987
(Reaffirmed 2019)) |
1000.0 |
|
| 18 (Accelerated Weathering
QUV test for 240 hours) |
12000.0 |
|
| 19 (Resistance to petrol benzol mixture
(To pass 500g scratch hardness after the exposure)
jSS-8010-82:2012, Appendix - D) |
2000.0 |
|
| 20 (Resistance to warm
water at 45±3° C for 4 hours
jSS-8010-82:2012,Appx E) |
3500.0 |
|
| 21 (Accelerated storage
stability test at 60° C for 96 h
jSS-8010-82:2012, Appendix - C) |
3500.0 |
|
| 22 (RESISTANCE TO SALT WATER
JSS-8010-82:2012, Appendix - F) |
8000.0 |
|
| 23 (Resistance to LUBRICATING OIL
jSS-8010-82:2012, Appendix - A) |
5000.0 |
|
| 24 (Resistance to heat at 150° C
JSS-8010-82:2012, Appendix- B) |
3500.0 |
|
| 25 (Humidity test at 95% RH & 30ºC TO 60ºC for 72 hours
IS:101 part .6.1.1988.) |
3000.0 |
|
| 26 (QUV test for 822 hours
Test Condition:24 hours Cycle of 8 hrs UV to 60ºC and 4 hrs
condensations to 40ºC
ASTM G154, ASTM D
4587) |
42000.0 |
|
| 27 (Resistance to low Temperature at -40 +/- 0.1ºC
for 08 hrs) |
10000.0 |
|
| 28 (Protection against corrosion
for 48 Hours IS 101) |
2000.0 |
|
| 29 (Resistance to High Temperature at 120 ± 0.1°C
for 8 hours.) |
1000.0 |
|
| 30 (Chemical Resistance In detergent) |
2500.0 |
|
| 31 (Chemical Resistance
(Petroleum, Diesel, Acetone
solvent)
ASTM D 2792) |
5000.0 |
|
| 32 (Salt Spray Test ASTM B 117 for48 hours
101B/ IS 101.6.3.1990) |
1200.0 |
|
| 33 (Outdoor Durability Test 25 days
JSS-8010-82 2012.Annex G) |
20000.0 |
|
| 34 (Impact Resistance test
ASTM 2794-93) |
5000.0 |
|
| 35 (Adhesion test, MPa
(ASTM D4541)) |
3500.0 |
|
| 36 (Abrasion Resistance (ASTM D 4060)
1000g load/CS 17/1000 Cycle) |
4000.0 |
|
| 37 (Hardness) |
3000.0 |
|
| 38 (Flexibility
ASTM D 522)) |
1500.0 |
|
| 39 (Dry heat Resistance) |
3500.0 |
|
| 40 (Storage Stability) |
2500.0 |
|
| 41 (Keeping property) |
10000.0 |
|
| 42 (Gloss Value) |
600.0 |
|
| 43 (Dry Film Thickness (DFT)) |
600.0 |
|
| 45 (Flash Point in Deg c
(IS 101 part 1 sec 6)) |
1200.0 |
|
| 46 (Salt Spray test
for 480 hours
ASTM B 117/ISO 9227) |
24000.0 |
|
| 47 (Salt spray test
for 1440 hours
ASTM B117/ISO 9227) |
72000.0 |
|
| 48 (Corrosion/Salt Fog Test
ASTM B117
14 DAYS) |
16800.0 |
|
| 49 (color) |
1200.0 |
|
| 50 (Appearance) |
1200.0 |
|
| 51 (Accelerated Weathering Test (QUV) as per IS15489:2013
for 2000hrs) |
100000.0 |
|
|
| 957 |
National Test House (ER), Kolkata
| IS 16098(Part 2) - STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE |
STRUCTURED-WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Outer Diameter(mm.)) |
1000.0 |
|
| - (Inner Diameter(mm.)) |
1000.0 |
|
| - (Wall Thickness(mm.)) |
1000.0 |
|
| - (Impact Test) |
2000.0 |
|
| - (Resistance to heating oven test) |
2000.0 |
|
| - (Ring Flexibility) |
2000.0 |
|
| Firm's request (Tensile Strength) |
2000.0 |
|
| Firm's request (Elongation) |
1000.0 |
|
| Firm's request (Hardness (Shore D)) |
1000.0 |
|
|
| 958 |
National Test House (ER), Kolkata
| IS 16098 Part 2 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Joints-Elastomeric Sealing Rings) |
1000.0 |
|
| 8.2.2 (Impact Strength of Injection Moulded and Fabricated Fittings) |
1000.0 |
|
| 8.2.1 (Mechnical of Fittings-General) |
2000.0 |
|
| 8.1.2 (Mechnical of pipes-Ring Flexibility) |
2000.0 |
|
| 8.1.1 (Mechnical of pipes-General) |
2000.0 |
|
| 7.1 (Appearance and Color ) |
1000.0 |
|
| 6.3.5 (Wall Thickness) |
1000.0 |
|
| 6.3.4 (Dia and joining dimensions of sockets and spigots) |
1000.0 |
|
| 6.3.2 (Length) |
1000.0 |
|
| 6.3.1 (Diameter ) |
1000.0 |
|
| 5.1 (Base Density) |
1000.0 |
|
| 7.2 (Resistance to Heating (Oven Test)) |
2000.0 |
|
| 5.1 (Melt Flow Rate (Base Material)) |
2000.0 |
|
| 1 (Thermal Stability(OIT)) |
2000.0 |
|
| Firm's request (Tensile Strength) |
2000.0 |
|
| Firm's request (Elongation) |
1000.0 |
|
| Firm's request (Hardness (Shore D)) |
1000.0 |
|
| Firm's request (Density) |
1000.0 |
|
| Firm's request (Melting Point) |
1000.0 |
|
|
| 959 |
National Test House (ER), Kolkata
| Custom - Powder of Quartzite lumps |
Powder of Quartzite lumps |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Fe2O3) |
1200.0 |
|
| 2 (SiO2) |
2000.0 |
|
|
| 960 |
National Test House (NER), Guwahati
| IS 2333 (1992) - Plaster of paris for ceramic industry - Specification (Second Revision) |
Plaster of paris for ceramic industry - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Calcium Sulphate ( As CaSO4)) |
1200.0 |
|
| 4.2 (Matter Insoluble in HCL) |
1000.0 |
|
| 4.3 (Carbonates ( As CaCO3)) |
1200.0 |
|
| 4.2 (Free moisture) |
500.0 |
|
| 4.3 (Compound water) |
1200.0 |
|
|
