NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

961

National Test House (ER), Kolkata

NTH ER Paint 2024 (0) - NTH ER Paint 2024

NTH ER Paint 2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Lead (as pb) by AAS (ASTM D 3335))	700.0
2 (Cadmium (as Cd) by AAS (ASTM D 3335))	700.0
3 (Chromium as Cr By AAS(ASTM D 3718))	700.0
4 (Mercury as Hg) by AAS (ASTM D 3624))	700.0
1 (Appearance)	1200.0

962

National Test House (NR), Ghaziabad

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4 (Bond Strength (Pull out test))	15000.0

963

National Test House (ER), Kolkata

15607 - BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION

BIODIESEL (B-100) — FATTY ACID METHYL ESTERS (FAME) — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.4 (Density at 15 °C, kg/m3)	1200.0
4.4 (Kinematic viscosity at 40 °C, cSt)	1200.0
4.4 (Copper strip corrosion, 3 h at 50 °C, Max)	1200.0
4.4 (Acid value, mg KOH/g, Max)	1200.0

964

National Test House (WR), Mumbai

Customized Specification for APP Modified Polyester Reinforced Bitumen Membrane - APP Modified Polyester Reinforced Bitumen Membrane

APP Modified Polyester Reinforced Bitumen Membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Roll Size)	500.0
- (Thickness as per ASTM D 5147)	1000.0
- (Roll Weight)	500.0
- (Softening Point as per ASTM D 36)	1500.0
- (Tensile Strength in Longitudinal Direction as per ASTM D 5147, N/5cm)	1000.0
- (Tensile Strength in Transverse Direction as per ASTM D 5147, N/5cm)	1000.0
- (Elongation at break in Transverse Direction as per ASTM D 5147, %)	1000.0
- (Elongation at break in Longitudinal Direction as per ASTM D 5147,%)	1000.0
- (Tear Strength in Longitudinal Direction as per ASTM D 5147, N)	2000.0
- (Tear Strength in Transverse Direction as per ASTM D 5147, N)	2000.0
- (Water Absorption as per ASTM D 5147)	2000.0
- (Compound Stability as per ASTM D 5147)	2000.0
- (Low Temperature Flexibility as per ASTM D 5147)	2000.0
- (Resistance to Ageing for 200hrs, UV as per ASTM G 154)	12000.0
- (Ageing in Weather-O-Meter for 200hrs as per ASTM G 155)	12000.0
- (Dimensional Stability in both directions as per ASTM D 5147)	2000.0
- (Penetration in dm at 25 deg. as per ASTM D 5)	1500.0

965

National Test House (ER), Kolkata

IS 3975 (1999) - Low carbon galvanized steel wires, formed wires and tapes for armouring of cables

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Sulphur)	500.0
6.2 (Phosphorus)	500.0
7 (Dimension)	1000.0
8.1 (Tensile Strength)	2000.0
8.2 (Torsion Test for round wire only)	1000.0
8.3 (Wrapping Test)	1000.0
8.4 (Resistance Test for round and formed wire)	2000.0
9.1 (Mass of Zinc Coating)	2000.0
9.2 (Uniformity of Coating)	1000.0
9.3 (Adhesion Test)	1000.0
11 (Freedom from defect)	1000.0
8.1 (% Elongation)	1000.0

966

National Test House (ER), Kolkata

11087. (1986) - Specification For Paper For Magnetic Ink Character Recognition Cheque Printing.

Specification For Paper For Magnetic Ink Character Recognition Cheque Printing.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Description)	1000.0
3.2 (Absence of Magnetizable Particles.)	1000.0
3.3 (Substance)	1000.0
3.4 (Thickness)	1000.0
3.5 (Sizes)	1000.0
3.6 (Smoothness)	1000.0
3.6 (Porosity)	1000.0
3.6 (Opacity)	2000.0
3.6 (Wax pick)	2000.0
3.6 (Tearing Strength)	2000.0
3.6 (Stiffness)	1000.0
3.9 (Chemical Sensitize Test)	10000.0
Firm's request (UV Sensitization Test (24 hrs))	1200.0

967

National Test House (NWR), Jaipur

IS 9815 (1994) - SERVO-MOTOR OPERATED AUTOMATIC LINE VOLTAGE CORRECTORS & CUSTOMER REQUIREMENTS

SERVO-MOTOR OPERATED AUTOMATIC LINE VOLTAGE CORRECTORS & CUSTOMER REQUIREMENTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.1 a (Physical Examination)	2000.0
11.1 b (Insulation Resistance Test)	5000.0
11.1 c (High Voltage Test)	5000.0
11.1 d (Provision for Earthing)	5000.0
11.1 f (Output Voltage)	5000.0
11.1 h (Measurement of no-load losses)	6000.0
11.1 k (Load loss test and efficiency)	7000.0

968

National Test House (NWR), Jaipur

IS : 9815( Part 1) :1994,Reaffirmed in : 2019 (1994 : Reaffirmed in : 2019) - Servo-Motor Operated Automatic Line Voltage Correctors

Servo-Motor Operated Automatic Line Voltage Correctors

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

969

National Test House (NR), Ghaziabad

1538 (1993) - Cast Iron Fittings for Pressure pipes for Water, Gas & Sewage

Cast Iron Fittings for Pressure pipes for Water, Gas & Sewage

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Chemical Composition, % by Mass)	3000.0
6.1 (Brinell Hardness test)	2000.0
9.1 (Dimension test)	2000.0

970

National Test House (ER), Kolkata

CUSTOMER SPECIFICATION PAINT LAB (0) - CUSTOMER SPECIFICATION PAINT LAB

CUSTOMER SPECIFICATION PAINT LAB

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Salt spray test 24 hours, after 48 hours, after 72 hours ,after 96 hours &after 120 hours I)Delta E Value (before Exposure) II)Delta E Value (after Exposure) III)Gloss Value (before Exposure) iv) Gloss Value (after Exposure))	8000.0
2 (Rusting/corrosion test as per ASTM B-117 Test results after 24, 48, 72, 96 and 120 hours exposure of salt spray for rusting/corrosion evaluation)	6000.0
3 (Salt Spray Test 96 hrs.)	4800.0
4 (Dry film thickness)	1200.0
5 (Cross hatch adhesion test)	1500.0
6 (Impact resistance test)	1500.0
7 (Pencil hardness test)	1500.0
8 (Bend Test)	1200.0
9 (Gloss)	1200.0
10 (Salt Spray (ASTM B117) 100 hrs)	5000.0
11 (Wasahbility and cleanibility)	2000.0
12 (Drying Time (a) Surface dry)	1200.0
13 (Drying time (b) Hard dry)	1200.0
14 (Finish)	1200.0
15 (VOC (%by mass))	3000.0
17 (Resistance to alkali)	1500.0
18 (Accelerated storage stability)	3000.0

971

National Test House (NR), Ghaziabad

IS 205 (1992) - Non Ferrous Metal Butt Hinges

Non Ferrous Metal Butt Hinges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Dimensions)	2000.0
7.2 (Anodizing)	2000.0

972

National Test House (NR), Ghaziabad

IS 204 (1992) - Tower Bolts

Tower Bolts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
7 (Anodizing)	2000.0

973

National Test House (NR), Ghaziabad

IS 208 (2020) - Door Handles

Door Handles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
7 (Anodizing)	2000.0

974

National Test House (NR), Ghaziabad

IS 2681 (1993) - Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks

Non-ferrous metal sliding door bolts (Aldrops) for use with padlocks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
8.2 (Anodizing)	2000.0

975

National Test House (ER), Kolkata

12089 - SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT

SPECIFICATION FOR GRANULATED SLAG FOR THE MANUFACTURE OF PORTLAND SLAG CEMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Manganese oxide)	1200.0
3.2 (Magnesium oxide)	1200.0
3.2 (Sulphide sulphur)	1200.0

976

National Test House (ER), Kolkata

1654:1992 - Lead Antimony Alloys-Specification

Lead Antimony Alloys-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Antimony)	1200.0
5.1 (Lead)	1200.0
5.1 (Arsenic)	1200.0
5.1 (Tin)	1200.0
5.1 (Copper)	1200.0
5.1 (Bismuth)	1200.0
5.1 (Iron)	1200.0
5.1 (Zinc)	1200.0
5.1 (Silver)	1200.0

977

National Test House (WR), Mumbai

IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated)

Galvanized Steel Sheets (Plain and Corrugated)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 ,15 (Dimensions)	1000.0
3.3 (Thickness of sheet (uncoated), mm)	1000.0
7 (Mass of Zinc coating ( Total Both sides))	2000.0
8.1 (Tensile Strength)	2000.0
8.1 (Yield Stress)	1000.0
8.1 (Elongation Percent)	1000.0
8.2 (Bend Test)	1000.0
12 (Freedom from Defects)	1000.0
14 ,15 (Dimensions)	1000.0
5.1 (Carbon, % by mass)	500.0
5.1 (Manganese, % by mass)	500.0
5.1 (Sulphur, % by mass)	500.0
5.1 (Phosphorous, % by mass)	500.0
0 (Coating Thickness of sheet at Top Side A, Bottom Side B and Total Coating Thickness)	1500.0
0 (Uniformity of Zinc Coating)	2000.0
5.1 (Chemical Compisitions in %, The base steel chemistry of galvanized sheets and coils shall be as per Table 1. The Product analysis of steel, when carried out either by the methods specified in relevant parts of IS 228 or any other established instrumental/chemical method)	3500.0
3.3 (Thickness of Sheet ( Base Matel))	1000.0

978

National Test House (NER), Guwahati

IS 14255 (1995) - Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

979

National Test House (NER), Guwahati

IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17.3 (Marking)	100.0
15.1 (a) iv (Resistance of conductor-R)	500.0
15.1 (a) iv (Resistance of conductor-Y)	500.0
15.1 (a) iv (Resistance of conductor-B)	500.0
15.1 (a) iv (Resistance of conductor-Black)	250.0
15.1.C (Minimum thickness of insulation)	250.0
15.1.C (Minimum thickness of sheath)	250.0
15.1.C (Average thickness of insulation)	250.0
15.1.C (Average thickness of sheath)	250.0
3.1 (Conductor)	100.0
6.1 (Armouring)	100.0
8.1 (Conductor)	100.0
8.3 (Conductor)	250.0
9.1 (Insulation)	100.0
9.2 (Insulation)	250.0
9.3 (Insulation)	100.0
9.4 (Insulation)	100.0
10.1 (Core Identification)	100.0
10.2 (Core Identification)	100.0
10.3 (CORE IDENTlFICATION)	100.0
11.1 (Laying up of cores)	100.0
12.1 (INNER SHEATH (COMMON COVERING))	100.0
12.2 (INNER SHEATH (COMMON COVERING))	250.0
12.3 (INNER SHEATH (COMMON COVERING))	100.0
13.1 (Armouring)	100.0
13.3 (ARMOURING)	100.0
13.1.4 (ARMOURING)	250.0
14.1 (Outer Sheath)	100.0
14.2 (Outer Sheath)	250.0
15.1 (a) ii (Tensile Test )	500.0
15.1 (a) iii (Wrapping test)	500.0

980

National Test House (ER), Kolkata

CUSTOM - Mineral Wool

Mineral Wool

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Shot Content)	2000.0

981

National Test House (ER), Kolkata

4276 - Soyabean Oil- Specification

Soyabean Oil- Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7 (Moisture and Insoluble impurities)	1200.0
5.7 (Colour on the Lovibond scale, expressed as (Y + 5R))	1200.0
5.7 (Refractive index at 40ºC)	1200.0
5.7 (Saponification value)	1200.0
5.7 (Iodine value (Wijs))	1200.0
5.7 (Acid value, Max)	1200.0
5.7 (Unsaponifiable matter,)	1200.0

982

National Test House (ER), Kolkata

IS 16353 (2015) - Portland Cement Clinker - Specification

Portland Cement Clinker - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Insoluble residue)	600.0
5 (Total loss on ignition)	600.0
5 (Alkali content expressed as sodium oxide(Na2O))	1200.0
5 (Magnesia)	600.0
5 (Chloride content)	500.0
5 (Free lime)	600.0
5 (Total Sulphur content calculated as sulphuric anhydride(SO3))	500.0
5 (C3S + C2S)	600.0
5 (C3A)	600.0
5 (C3S)	600.0
5 (Ratio of percentage of alumina to that of iron oxide)	600.0
5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	600.0

983

National Test House (ER), Kolkata

F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F-17 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1200.0
3 (Theoretical coverage m2/litre/coat)	1500.0
4 (weight per litre in Kg/litre of mix paint)	1200.0
5 (Touch Dry @ 30°C in Hours)	500.0
6 (Hard Dry Time @ 30°C in Hours)	500.0
7 (Full Cure @ 30°C)	1500.0
8 (Overcoating Intervals Hours)	1200.0
9 (Pot Life in Hrs)	1200.0
10 (Adhesion ASTM D 4541 in Mpa)	3500.0
11 (Temperature Resistance (at 150 Deg C ASTM D 2485 (Method A))	1500.0

984

National Test House (ER), Kolkata

F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F-20 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1200.0
3 (Theoretical coverage m2/litre/coat)	1200.0
4 (weight per litre in Kg/litre)	1500.0
5 (Touch Dry @ 30°C Hours)	500.0
6 (Hard Dry Time @ 30°C ; Hours)	500.0
7 (Full Cure @ 30°C in hours)	1000.0
8 (Overcoating Intervals Hours)	1500.0
9 (Pot Life)	1500.0
10 (Adhesion ASTM D 4541 Mpa)	3500.0
11 (Tensile Strength ( ASTM D638) N/mm2)	5000.0
12 (Temperature Resistance (at 90 Deg C ASTM D 2485 Method A)	2500.0

985

National Test House (ER), Kolkata

F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION

F-9 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEWCONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat in microns)	1200.0
3 (Theoretical coverage m2/litre/coat)	1500.0
4 (weight per litre in Kg/litre)	1500.0
5 (Touch Dry @ 30°C)	500.0
6 (Hard Dry Time @ 30°C in; Hours)	500.0
7 (Overcoating Intervals Hours)	1500.0
8 (Pot Life)	1200.0
9 (Adhesion ASTM D 4541)	3500.0
10 (MEK rub test ASTM D4752)	1500.0
11 (% Zinc Content on dry film)	2000.0
12 (Temperature Resistance at 400 Deg C ASTM D 2485 Method B)	1500.0

986

National Test House (ER), Kolkata

F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F6B EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1200.0
3 (Theoretical coverage m2/litre/coat)	1200.0
4 (weight per litre in Kg/litre)	1200.0
5 (Touch Dry @ 30°C)	500.0
6 (Hard Dry Time @ 30°C)	500.0
7 (Full Cure @ 30°C)	1200.0
8 (Overcoating Intervals Hours)	1500.0
9 (Pot Life in hours)	1500.0
10 (Adhesion ASTM D 4541)	3500.0
11 (Temperature Resistance at 80Deg C Method A ASTM D 2485)	1500.0

987

National Test House (ER), Kolkata

F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F6A -EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1300.0
3 (Theoretical coverage m2/litre/coat)	1000.0
4 (weight per litre in Kg/litre)	1000.0
5 (Touch Dry @ 30°C in Hours)	500.0
6 (Hard Dry Time @ 30°C in Hours)	500.0
7 (Full Cure @ 30°C)	1500.0
8 (Overcoating Intervals Hours)	1500.0
9 (Pot Life in hours)	1000.0
10 (Adhesion ASTM D 4541)	3500.0
11 (Temperature Resistance at 80 Deg C ASTM D 2485 Method A)	2500.0

988

National Test House (ER), Kolkata

F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 (0) - F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

F-2 EIL SPECIFICATION B269-000-02-42-PCS-0001 Rev. 2 SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATING SYSTEM - NEW CONSTRUCTION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume of Solids % (ASTMD 2697 Air drying method ))	1500.0
2 (Dry Film Thickness per coat, microns)	1000.0
3 (Theoretical coverage m2/litre/coat)	1000.0
4 (weight per litre in Kg/litre)	500.0
5 (Touch Dry @ 30°C Hours)	500.0
6 (Hard Dry Time @ 30°C Hours)	500.0
7 (Overcoating Intervals Hours)	1000.0
8 (Pot Life in Hrs for two component paints)	1000.0
9 (Adhesion ASTM D 4541)	3500.0
10 (Abrasion Resistance ASTM D 4060 For 1000 g load/1000 cycles CS-17 wheel)	3500.0
11 (Temperature Resistance (at 80 deg C.) Method A- ASTM D 2485)	2500.0

989

National Test House (ER), Kolkata

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Carbon)	500.0
4.3 (Sulphur)	500.0
4.3 (Phosphorus)	500.0
4.3 (Silicon)	500.0
4.3 (Manganese)	500.0
4.3 (Chromium)	500.0
4.3 (Nickel)	500.0
4.3 (Molybdenum)	500.0
4.3 (Copper)	500.0
9.3 (Bend Test)	1000.0
5.2 (Rib Area)	1000.0
7.2 (Nominal Mass per meter Run)	1000.0
9.4 (Rebend Test (Upto 25 mm))	1000.0
8.6 (Charpy Impact Test at Room Temperature)	5000.0
9.2 (0.2 % Proof Stress / Yield Stress)	1000.0
9.2 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area)	500.0
9.2 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Crosss- Sectional Area,)	500.0
9.2 (Tensile Strength (up to 12 mm),)	500.0
9.2 (Tensile Strength (16 to 25 mm))	1000.0
9.2 (Tensile Strength (32 mm))	1500.0
9.4 (Rebend Test (32 mm))	1500.0
5.7 (Bond Stress of deformed bar at Ultimate Failure (for size up to 12 mm))	1250.0
5.7 (Bond Stress of plain bar at Ultimate Failure (for size up to 12 mm))	1250.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (For size up to 12 mm ))	1250.0
5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size up to 12 mm))	1250.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (For size up to 12 mm))	1250.0
5.7 (Bond Stress of Deformed bar at 0.025 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size up to 12 mm))	1250.0
5.7 (Bond Stress of Plain bar at 0.025 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at 0.025 mm slip (for size 16 to 32mm))	1875.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.025 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of Plain bar at 0.25 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at 0.25 mm slip (for size 16 to 32 mm))	1875.0
5.7 (Percentage increase in Bond Stress of Deformed Bar against corresponding Plain Bar at 0.25 mm slip (for size 16 to 32 mm),)	1875.0
5.7 (Bond Stress of plain bar at Ultimate Failure (for size 16 to 32 mm))	1875.0
5.7 (Bond Stress of deformed bar at Ultimate Failure (for size 16 to 40 mm))	1875.0

990

National Test House (WR), Mumbai

Customized Specification for FLEXSEAL 4 mm. - Customized Specification for FLEXSEAL 4 mm.

Customized Specification for FLEXSEAL 4 mm.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength (Transverse) as per ASTM D 5147 (N/50mm.))	1000.0
- (Tensile Strength (Longitudinal) as per ASTM D 5147 (N/50mm.))	1000.0
- (Elongation as per ASTM D 5147 (Longitudinal))	1000.0
- (Elongation as per ASTM D 5147 (Transverse))	1000.0
- (Tear Strength(Longitudinal) as per ASTM D 5147)	1000.0
- (Low Temperature Flexibility as per ASTM D 5147)	3000.0
- (Compound Stability at 100 deg. C as per ASTM D 5147)	3000.0
- (Dimensional Stability as per ASTM D 5147(Longitudinal))	1000.0
- (Dimensional Stability as per ASTM D 5147(Transverse))	1000.0
- (Tear Strength(Transverse) as per ASTM D 5147)	1000.0