NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1951

National Test House (NER), Guwahati

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0

1952

National Test House (ER), Kolkata

NTHER-Calibration of Micro-ohm Meter - NTHER-Calibration of Micro-ohm Meter

NTHER-Calibration of Micro-ohm Meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Calibration of Micro-ohm Meter(1A))	2000.0
A2 (Calibration of Micro-ohm Meter(100A))	3000.0

1953

National Test House (WR), Mumbai

ASTM D 257 (1999) - Solid insulating materials

Solid insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Solid insulating materials)	1000.0

1954

National Test House (SR), Chennai

IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Hydrostatic Characteristics)	5000.0
7.1.3 (Length)	1000.0
7.1.2 (Wall Thickness)	1000.0
7.1.1 (Diameter at any point )	1000.0
9.4 (Reversion Test)	2000.0

1955

National Test House (SR), Chennai

Customer Specification ALL (2022) - Cust Spfn. Test Result

Cust Spfn. Test Result

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Results of the Tests - RPPT)	5000.0
2 (Results of the Tests - Electrical)	1500.0
2 (Results of Tests)	6000.0
3 (Test Results)	5500.0
5 (Effect on water)	2000.0
6 (Results of the Test(All other Custom Test))	15500.0
7 (Results of Test(all other Custom tests))	14000.0
8 (Vicat Softening Temperature)	1500.0
9 (Opacity Test)	2000.0
10 (Results of the Test)	1.0
11 (Results of the Tests)	5000.0
12 (100% Cotton Test)	2000.0
13 (100% Cotton Test)	2000.0
14 (Identification of Material)	2000.0
15 (Results of the Tests Handloom Cotton Bed sheet)	26400.0
16 (Results of the Tests firms requirement handloom cotton bed sheet)	9400.0
17 (Results of the Test Custom spfn)	11000.0
18 (Results of Tests-Raincoat)	9000.0
19 (Water Absorption Test at RT)	1000.0
20 (Result of the Tests (Foam Material) Attached Annexure)	6000.0
21 (Results of the Tests (SMC profile) Annexure attached)	21500.0
22 (Result of the Tests (UPVC profile) Attached Annexure)	16500.0
23 (Thickness, mm)	1000.0
24 (Density at RT)	1000.0
25 (Hardness Test - Shore A (Normal Condition))	1000.0
26 (Hardness Test - Shore A (After ageing Condition))	2000.0
27 (Results of the Test-Buckram (Annexure attached))	31500.0
28 (Accelerated Fading test (After72hours exposure))	5000.0
29 (Thickness, mm)	3000.0
30 (Count)	1000.0
31 (Fiber Composition)	2000.0
32 (Results of the Tests (Annexure attached Dungricloth))	11000.0
33 (Scouring loss, %)	1200.0
34 (pH value of aqueous extract (cold method))	1200.0
35 (Tensile Strength, MPa)	2000.0
36 (Elongation, %)	1000.0
37 (Tensile Strength, MPa & Elongation, %)	2000.0
38 (Results of Test (Pl. see Annexure attached))	12500.0
39 (Results of Tests (Annexure Attached AF5200))	15000.0
40 (Softening point)	2000.0
41 (Thickness test)	1000.0
42 (Elongation, % at 23deg Both Longitudinal & Transverse direction)	1000.0
43 (Joint Strength, N/5cm width, in Longitudinal & Transverse direction)	2000.0
44 (Tear Strength, N in Longitudinal & Transverse direction)	2000.0
45 (Cold Flexibility at (-)2degC)	2000.0
46 (Results of the tests(Annexure-Polycarbonate Sheet))	9000.0
47 (Shore Hardness, Shore-A)	1000.0
48 (Identification of Material-FTIR)	2000.0
49 (Thickness of foam-Seat)	1000.0
50 (Thickness of Foam-Back)	1000.0
51 (Density of Foam-Seat)	1000.0
52 (Density of Foam-Back)	1000.0
53 (Powder coating thickness)	2000.0
54 (Thickness of Fabric)	1000.0
55 (Dimension Seat Size)	1000.0
56 (Dimension Back size)	1000.0
57 (UV Exposure (Protection) Test)	5000.0
58 (Results of tests (Polycarbonate sheet))	4000.0

1956

National Test House (SR), Chennai

IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision)

Methods of testing local thickness of electroplated coatings (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3203 (Coating thickness)	2000.0

1957

National Test House (SR), Chennai

IS 1868 (1996) - Anodic coatings on aluminium and its alloys - Specification (Third Revision)

Anodic coatings on aluminium and its alloys - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 c (Eddy current method) (Thickness of Coating, Micron)	2000.0

1958

National Test House (SR), Chennai

ASTM A240/A240M-15b (2015) - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Carbon)	1000.0
Table 1 (Manganese)	1000.0
Table 1 (Phosphorus)	1000.0
Table 1 (Sulphur)	1000.0
Table 1 (Silicon)	2000.0
Table 1 (Chromium)	1000.0
Table 1 (Nickel)	1000.0
Table 1 (Molybdenum)	1000.0

1959

National Test House (SR), Chennai

ASTM A312 (2016) - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Carbon)	500.0
7 (Manganese)	500.0
7 (Phosphorus)	500.0
7 (Sulfur)	500.0
7 (Silicon)	500.0
7 (Chromium)	500.0
7 (Nickel)	500.0
7 (Molybdenum)	500.0
9 (Wall Thickness, mm)	1000.0
10 (Tensile Strength)	1000.0
10 (Yield Strength)	1000.0
10 (Elongation)	1000.0
9.1 (Outside diameter, mm)	1000.0
9.1 (Mass per meter, kg/m)	1000.0

1960

National Test House (ER), Kolkata

IS:14772-2000 (2000) - GE~NERAL REQUIREMENTS FOR ENCLOSURES FOR ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - SPECIFICATION

GE~NERAL REQUIREMENTS FOR ENCLOSURES FOR ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15 (RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT AND TO FIRE)	10000.0

1961

National Test House (SR), Chennai

Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification

Test as per Manufacturer/Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test as per Manufacture / Customer Specification)	25000.0
2 (Electrical conductivity test in IACS as per IS 613.)	5000.0
3 (Electrical Resistance Test as per IS 3635.)	3000.0
4 (Purity of Copper as per IS 191)	2000.0
5 (Tensile and Elongation test for Insulation and Outer Sheath on the lines of IS 694.)	3000.0
6 (Test for over all Dimension)	1000.0
7 (Density)	1000.0
8 (Electrical Resistivity Test IS 1897 in accordance with IS 3635.)	1500.0
9 (CHEMICAL COMPOSITION as per IS 440)	3000.0
10 (Uniformity of Zinc coating)	1500.0
11 (Marking of Sample)	1.0
12 (Dimensions as per Table 1 & 2 of IEC 62561-2)	1000.0
13 (Electrical Resistivity - Table 2 & 4 of IEC 62561-2)	2000.0
14 (Tensile Strength as per Cl.No:5.2.5 of IEC 62561-2 :2012)	1500.0
15 (Coating Test as per Cl.No:5.2.2 of IEC 62561-2 :2012)	2000.0
16 (Testing as per UL 94 Classification Requirement (V-0), Vertical Flame Test and Customer Test request.)	5000.0
17 (LSZH Property)	20000.0
19 (Mechanical Endurance test for 1000 cycles on the lines of relevant para of IEC 62271-103:2011)	15000.0
20 (Electrical Resistivity Test as per IEC 62561-7)	10000.0
21 (Determination of Insulation Resistance as per IS 10810: Part 43: 1984 (Reaffirmed Year: 2021 ))	1500.0
22 (Thermal profile test – as per PGCIL Specification Cl. No 2.6)	15000.0
23 (Magnetic power loss test as per PGCIL technical Specification Cl 2.5.)	15000.0
24 (Drawing Verification)	6000.0
25 (Functional Verification of Fail Safe Circuits in Heavy Escalator)	20000.0
24 (Drawing Verification)	6000.0
26 (Mechanical endurance test for 1000 Cycles on lines of relevant para of IEC 62271-102)	15000.0
27 (Test as per RDSO Specification:T1/ SPC/OHE/CAT(CuCd)/0971 Effect from 04.01.2021 for Individual wire & Conductor (Values Specified / Declared by Power Grid))	64700.0
28 (Test as per RDSO Specification:T1/ SPC / OHE/ CW /0971 Effect from 01.01.2021 (Values Specified / Declared by Power Grid))	15000.0
29 (Type Test as per RDSO spec No. IRS : S76-89)	25000.0
37 Note Authenticator Cum Sorting Machines (3+1) (Note Authenticator Cum Sorting Machines (3+1) Tests and observations as per Bank Specification)	40000.0
31 (onsite : Scientist charges)	5000.0
32 (Lightning Impulse Voltage Dry Test)	15000.0
33 Note Authenticator Cum Sorting Machines (2+1) (Note Authenticator Cum Sorting Machines (2+1) Tests and observations as per Bank Specification)	40000.0
34 Note Authenticator Cum Sorting Machines (4+1) (Note Authenticator Cum Sorting Machines (4+1) Tests and observations as per Bank Specification)	50000.0
35 Note Authenticator Cum Sorting Machines (8+1) (Note Authenticator Cum Sorting Machines (8+1) Tests and observations as per Bank Specification)	50000.0
36 (Scientist Charges ( for 2 persons, 5 days))	50000.0
30 Note Authenticator Cum Sorting Machines (1+1) (Note Authenticator Cum Sorting Machines (1+1) Tests and observations as per Bank Specification)	35000.0
1 (Test as per Manufacture / Customer Specification)	25000.0
38 (Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification)	3000.0
39 (Tests as per Manufacture/Customer Specification)	5000.0
40 (Tests as per Manufacture/Customer Specification)	10000.0
41 (Tests as per Manufacture/Customer Specification)	15000.0
42 (Tests as per Manufacture/Customer Specification)	20000.0
43 (Conformity Tests for Battery operated platform truck as per IS:10311-1982)	30000.0
44 (Manufacture/Customer Specification)	40000.0
47 (Manufacture/Customer Specification)	100000.0
48 (Manufacture/Customer Specification)	200000.0

1962

National Test House (ER), Kolkata

IS 2250:1981 - Code of Practice for Preparation and use of Masonry Mortars

Code of Practice for Preparation and use of Masonry Mortars

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.4,6.1, Table 1 & Appendix A (Compressive strength of Masonry Mortar)	4000.0
9.1.1 Table 1,Appendix B (Consistency of Masonry Mortar)	500.0
6,Table 1 (Grade of Mortar-Mortar mix ratio (IS 1199))	5000.0

1963

National Test House (WR), Mumbai

ISO / EN / ASTM - Custom Specn Adhesive / Coating NTH(WR)

Custom Specn Adhesive / Coating NTH(WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Pull out test of coating, (ISO 4624), N/mm^2)	5000.0
8 (Pull-off Adhesion Strength of Coating on Concrete (on the lines of ASTM D 7234-12), MPa)	5000.0
8 (Average Tensile Strength (on the lines of ASTM D 412), N/mm^2)	2000.0
8 (Average Elongation at Break (on the lines of ASTM D 412), in %)	2000.0
5 (Depth of Permeability of Water under pressure (on lines of BS EN 12390), in mm)	10000.0
5 (Depth of Permeability of Water under pressure-comparison with controlled specimen (on lines of BS EN 12390), in mm)	15000.0

1964

National Test House (ER), Kolkata

ND Custom 3 (2022) - Stainless Steel Wire 420 Grade

Stainless Steel Wire 420 Grade

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile Strength)	3000.0
2 (Carbon)	500.0
2 (Manganese)	500.0
2 (Silicon)	500.0
2 (Phosphorus)	500.0
2 (Sulphur)	500.0
2 (Chromium)	500.0
2 (Nickel)	500.0

1965

National Test House (ER), Kolkata

Custom BHU Soil

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (pH)	1000.0
2 (Manganese)	1000.0
3 (Zinc)	1000.0
4 (Total Nitrogen)	1000.0
5 (Iron)	1000.0

1966

National Test House (ER), Kolkata

IS 1148 (2009) - Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Shear Test (Medium Tensile Steel))	3000.0
9 (Diameter of Bar (Over 24mm))	500.0
6 (Carbon)	500.0
6 (Sulphur)	500.0
6 (Phosphorus)	500.0

1967

National Test House (SR), Chennai

ISTA 1G - Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS

Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1968

National Test House (SR), Chennai

Customer Requirement - Electronics/IT/RF Product

Electronics/IT/RF Product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (As per Customer requirement)	20000.0

1969

National Test House (SR), Chennai

IS 1161 (2014) - Steel Tube for Structural Purposes

Steel Tube for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1970

National Test House (NR), Ghaziabad

ICF/MD/SPEC-126 - Specification for Stainless Steel Flux Covered Electrodes

Specification for Stainless Steel Flux Covered Electrodes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Radiography Test)	2000.0

1971

National Test House (WR), Mumbai

MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
505 (Thickness of Dense Bituminous Macadam (DBM), in mm)	1000.0
507 (Thickness of Bituminous Concrete Layer (BC), in mm)	1000.0
505 (Combined Density of Dense Bituminous Macadam (DBM) & BC, in g/cc)	2000.0
505 (Binder Content of DBM, in %)	3000.0
507 (Bitumen Content of BC, in %)	3000.0
507 (Thickness of DBM Layer (BC), in mm)	1000.0
505 (Density DBM (ASTM-D2726))	2000.0
507 (Density of BC (ASTM-D2726))	2000.0
Binder Content of SDAC (Binder content of Semi Dense Asphaltic Concrete)	3000.0
Binder Content DAC (Binder content of Dense Asphaltic Concrete)	3000.0
505 (Binder Content of DBM, in %)	3000.0
Density of SDAC (Density of Semi Dense Asphaltic Concrete)	2000.0
Density DAC (Density of Dense Asphaltic Concrete.)	2000.0
CLAUSE-1,Table-1 (Cutting & Preparation of Core sample-Single Stage)	1000.0

1972

National Test House (WR), Mumbai

Cust Specn Adhesive - Custom Specification for Adhesive NTH(WR)

Custom Specification for Adhesive NTH(WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM (Accelerated Weathering Test by Xenon Arc (500 hr))	30000.0
IS 15477 (Modified Adhesion Test before exposure to Accelerated Weathering Test, N)	8000.0
IS 15477 (Modified Adhesion Test after exposure to Accelerated Weathering Test, N)	8000.0
ASTM (Accelerated Weathering Test by Xenon Arc (250 hr))	15000.0
ASTM D 4541 / 7234 (Pull off Adhesion Strength of coating (a) Control sample (b) Coated Sample.)	10000.0

1973

National Test House (ER), Kolkata

CUSTOM-02-ER-MCALI - Calibration of Test Ring (Ketos)

Calibration of Test Ring (Ketos)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension)	4000.0

1974

National Test House (ER), Kolkata

IS 12118(Part 1):1987 - Specification for Two-Part Polysulphide-based Sealants

Specification for Two-Part Polysulphide-based Sealants

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1.1 (Rheological Properties-Pouring grade sealants)	1000.0
5.1.1.2 (Rheological Properties-Gun grade sealant)	5000.0
5.1.2 (Plastic deformation)	1500.0
5.1.3 (Adhesion and Tensile modulus)	5000.0
5.1.5 (Adhesion in Peel)	2500.0
5.1.6 (Loss of Mass after heat ageing)	1500.0
5.1.7 (Staining)	600.0
5.1.4 (Application life)	1500.0

1975

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/123/2018 (2018) - SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Weight per epoxy equivalent on non-volatile vehicle content basis (Cl.4 of IS:9162-1979))	3500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) a) Surface dry (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) b) Recoating time (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) c) Hard dry (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at 27(+/-2 deg C) d) Curing time (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Consistency (IS: 101 (Pt. 1/Sec. 5)-1989)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Finish (IS: 101 (Pt. 3/Sec. 4)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Colour (IS: 101 (Pt. 4/Sec. 2)-1989)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Dry film thickness per coat, by brush/air/airless spray (IS: 101 (Pt.3/Sec.2)-1989 By Elecometer Thickness gauge meter)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Volume solids, Appendix-I of RDSO SPECIFICATION No.M&C/PCN/123/2018)	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Scratch hardness (at 1.5 Kg load) (IS: 101 Pt.5/Sec.2)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flexibility & Adhesion (6.25 mm Mandrel) (IS: 101 Pt.5/Sec.2)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flash point for both the packs (IS: 101 (Pt.1/Sec. 6)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to salt spray for 3000 hours (ASTM: B-117))	100000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Protection against corrosion under condition of condensation for 3000 hours (IS: 101 (Pt. 6/Sec.1)-1988)	75000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Keeping properties for both the packs (IS : 101 (Pt. 6/Sec.2)-1989)	5000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min i) 100 micron DFT (IS: 101 (Pt.4/Sec.1)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min ii) 75 micron DFT (IS: 101 (Pt.4/Sec.1)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals i) 25% caustic soda solution (w/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals ii) 30% sulphuric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iii) 20% hydrochloric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iv) Resistance to tap Water for 3000 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pot life at 27(+/-2) deg C, min. Appendix-III of RDSO SPECIFICATION No.M&C/PCN/123/2018)	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Mass in kg/10 litres, min, (IS : 101 (Pt. 1/Sec.7)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Impact resistance test at height 31 inch and weight 3.226 pound) (100 inch pound load), (ASTM D 2794))	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Cathodic disbondment test, max)	10000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Abrasion Resistance test for 1000 cycles with CS-17 wheels & 1.0 Kg load (ASTM D 4060))	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion test (ASTM D 3359))	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion & Compatibility test with Acrylic Polyurethane Paint (ASTM D 3359 & Appendix -IV))	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pull of Adhesion test, Min (ASTM D 4541))	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Please refer annexure for test result as per RDSO SPECIFICATION No.M&C/PCN/123/2018)	1.0

1976

National Test House (ER), Kolkata

ASTM A572 (2007) - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Yield Point)	2000.0
6 (Tensile Strength)	2000.0
6 (Elongation)	1000.0

1977

National Test House (SR), Chennai

CUS/SR/MECH-15 - Dimensional measurement

Dimensional measurement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Dimensions)	1200.0
1.2 (Dimensions)	3000.0

1978

National Test House (ER), Kolkata

IS 2590 - SPECIFICATION FOR PRIMARY ALUMINIUM INGOTS FOR REMELTING FOR GENERAL ENGINEERING PURPOSES

SPECIFICATION FOR PRIMARY ALUMINIUM INGOTS FOR REMELTING FOR GENERAL ENGINEERING PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 i (Aluminium,)	1200.0
6.1 ii (Copper)	1200.0
6.1 iii (Silicon)	1200.0
6.1 iv (Iron)	1200.0
6.1 v (Manganese)	1200.0
vi (Zinc)	1200.0
6.1 vii (Titanium + Vanadium)	2400.0

1979

National Test House (NR), Ghaziabad

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103) (1991 RA 2018) - Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1980

National Test House (SR), Chennai

RFP-1/NA-S - Note Authenticator Cum Sorting Machines

Note Authenticator Cum Sorting Machines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Performance and verification for Note Authenticator Cum Sorting Machine(1+1))	35000.0