NTH - Management Information System

Search by Standard No.

Reset

3478 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1981

National Test House (SR), Chennai

IEC 62040 (2011) - Method of specifying the performance and test requirements

Method of specifying the performance and test requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Performance check (1kVA))	10000.0
1 (Performance check(3kVA))	12500.0
1 (Performance check (5kVA))	12500.0
1 (Performance check(10kVA))	25000.0
1 (Performance check (20 KVA))	40000.0

1982

National Test House (NR), Ghaziabad

IS 1079 (2009) - Hot Rolled Carbon Steel Sheet and Strip

Hot Rolled Carbon Steel Sheet and Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Tensile strength for Designation Drawing quality)	1000.0
6 (Chemical composition)	2500.0
27473 (Core Wire Diameter)	1000.0

1983

National Test House (SR), Chennai

Gravel Resistivity Measurement On lines of SFQP Power Grid Specification & Customer Specification - 20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification

20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Description of Sample)	1.0
2 (Sample Marking Provided on Sample)	1.0
3 (Gravel Resistivity Measurement (as per Customer Specification))	20000.0

1984

National Test House (ER), Kolkata

IS 5666 (1970 RA 2019) - Etch Primer

Etch Primer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Consistency)	1000.0
3.3.2. (Mixed Material)	500.0
3.4 (Viscosity)	1000.0
3.5.1 (Air Drying)	500.0
3.5.2 (Force Drying Force Dry for 15 min at temp 85 to 100 Deg c &allow to cool for 1 hrs at Room Temp)	500.0
3.6 (Finish)	200.0
3.7 (Fineness of Dispersion)	500.0
3.8 (Fitness to Take a Coat of Primer, Cellulose Finish)	500.0
3.9 (Keeping Quality (for Six Months))	4000.0

1985

National Test House (WR), Mumbai

RDSO SPEC M&C/PCN/103/2020 (2020) - SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK)

SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1986

National Test House (NER), Guwahati

FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Schedule I Part A (Water soluble potash (as K2O))	1000.0
Schedule I Part A (Water soluble phosphate (as P2O5))	1000.0
Schedule I Part A (Ammoniacal nitrogen)	1000.0
Schedule I Part A (Total nitrogen)	1000.0
Schedule I Part A (Moisture)	1000.0
Schedule I Part A (Matter insoluble in water)	1000.0
Schedule I Part A (Moisture)	1000.0
Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve and not more than 5 per cent shall be below 1 mm IS sieve.)	1000.0
Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve.)	1000.0
Schedule I Part A (Available Phosphorous percent by weight)	1000.0
Schedule I Part A (Free phosphoric acid (as P 2O5))	1000.0
Schedule I Part A (Sulphate Sulphur percent by weight)	1000.0
Schedule I Part A (Biuret)	1000.0
Schedule I Part A (Neem oil content soluble in Benzene,)	1000.0
Schedule I Part A (Magnesium (as Mg))	1000.0
Schedule I Part A (Elemental sulphur (as S))	1000.0
Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5))	1000.0
Schedule I Part A (Iron (as Fe))	1000.0
Schedule I Part A (Copper (as Cu))	1000.0
Schedule I Part A (Manganese (as Mn))	1000.0
Schedule I Part A (Cadmium (as Cd))	1000.0
Schedule I Part A (Molybdenum (as Mo))	1000.0
Schedule I Part A (Lead (as Pb) )	1000.0
Schedule I Part A (Nitrate nitrogen)	1000.0
Schedule I Part A (Magnesium as MgO)	1000.0
Schedule I Part A (Boron (as B))	1000.0
Schedule I Part A (Water soluble calcium (as Ca))	1000.0
Schedule I Part A (Zinc (as Zn))	1000.0
Schedule I Part A (Arsenic (as As))	1000.0
Schedule I Part A (pH (5 % solution))	1000.0
Schedule I Part A (Total Chloride (as Cl) percent by weight)	1000.0
Schedule I Part A (Free acid (as H2SO4))	1000.0
Schedule I Part A (Specific gravity (kg/l))	1000.0
Schedule I Part A (Sodium as NaCl)	1000.0
Schedule I Part A (Particle Size)	1000.0

1987

National Test House (WR), Mumbai

266 (1993 (RA2020)) - Sulphuric Acid

Sulphuric Acid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 and 4.3 (i) (Total Acidity (as H2SO4))	1000.0
4.2 and 4.3 (ii) (Residue on Ignition)	500.0
4.2 and 4.3 (iii) (Iron (as Fe))	500.0
4.2 and 4.3 (iv) (Chlorides (as Cl))	500.0
4.2 and 4.3 (v) (Lead (as Pb))	1.0
4.2 and 4.3 (vi) (Arsenic (as As))	500.0
4.2 and 4.3 (vii) (Oxidizable Impurities (as SO2))	500.0
4.2 and 4.3 (viii) (Organic Matter)	500.0
4.2 and 4.3 (ix) (Nitrates (as NO2))	500.0
4.2 and 4.3 (x) (Ammonia (as NH3))	500.0
4.2 and 4.3 (xi) (Selenium (as Se))	500.0
4.2 and 4.3 (xii) (Manganese (as Mn))	500.0
4.2 and 4.3 (xiii) (Copper (as Cu))	500.0
4.2 and4.3 (xiv) (Zinc (as Zn))	500.0
4.2 and 4.3 (xv) (Nitrates, Nitrites, and Ammonia (as N))	500.0
4.1.3 (Preliminary Examination)	500.0
Specific Gravity (Specific Gravity)	500.0
TEST RESULTS AS PER ANNEXURE (TEST RESULTS AS PER ANNEXURE)	5000.0

1988

National Test House (ER), Kolkata

Customized IS:11673-1992 (1992) - Sodium Hypo Chlorite Specification

Sodium Hypo Chlorite Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Available Chlorine % by mass by Volume)	2000.0

1989

National Test House (SR), Chennai

Customer Specification - Lightning Impulse Voltage - Lightning Impulse Voltage Test on HV Bushings - Customer Specification

Lightning Impulse Voltage Test on HV Bushings - Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Lightning Impulse test Full wave - Customer Specification (Lightning Impulse test Full wave on HV Bushings - Customer Specification)	10500.0
Lightning Chopped Impulse test - Customer Specification (Lightning Chopped Impulse test on HV Bushings - Customer Specification)	13000.0
3 (Dielectric Test on Tap Changer - Lightining Impulse , Chopped Impulse and High Voltage Test)	122500.0
Lightning Impulse test (Lightning Impulse test Full wave)	15000.0

1990

National Test House (NR), Ghaziabad

IS 16205(Part24):2018 (2018) - Conduit Systems for Cable Management

Conduit Systems for Cable Management

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.0 (Table101) (Dimension)	2000.0
10.2 (Compression Test)	3000.0
10.3 (Impact Test)	4000.0

1991

National Test House (ER), Kolkata

IS 14246 (2024) - Continuously Pre-Painted Galvanized Steel Sheets and Strips

Continuously Pre-Painted Galvanized Steel Sheets and Strips

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Bend Test)	1000.0
9 (Mass of Sheet)	1000.0
8 (SALT SPRAY TEST (CORROSION RESISTANCE))	50000.0
4.2 (Mass of Zinc Coating)	2000.0
4.3 (Paint Coating Thickness)	2000.0
6.3 (Pencil Hardness Test)	1000.0
6.4 (Impact Resistance Test)	1000.0
6.5 (Cross Hatch Test)	1000.0
4 (Chemical Analysis as per Is 513 (Part-1):2016)	2500.0
4 (Tensile strength, MPa)	1000.0
4 (Yield Stress, MPa)	1000.0
4 (% Elongation)	1000.0
9 (Base Metal Thickness)	500.0
9 (Total Coated Thickness (as on received))	500.0

1992

National Test House (NR), Ghaziabad

JIS G 3448 - Light gauge stainless steel tubes for ordinary piping

Light gauge stainless steel tubes for ordinary piping

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Outside Diameter)	1000.0
6 (Thickness)	1000.0
3 (Chemical Composition)	5000.0
6.1 (Weight per Metre, kg)	1000.0
9.2 (Flattening Test)	1000.0
9.1 (Tensile strength test as per IS 1608 (Part 1):2022, N/mm2)	2000.0
9.1 (Elongation percent, % as per IS 1608(Part 1):2022)	1000.0

1993

National Test House (NR), Ghaziabad

IS 7098 Part 1, RA :2020, Amdt 5 - Cross linked polyethylene insulated PVC sheathed cables, Part 1: For working voltage upto and including 1 100 V

Cross linked polyethylene insulated PVC sheathed cables, Part 1: For working voltage upto and including 1 100 V

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.15.1 (Type tests as per Cl.15.1)	26000.0
C) and f) of Cl.15.1 (Test for thickness of insulation and sheath and Insulation Resistance)	5000.0
Test1 (Type tests)	20000.0
Test2 (Type Tests)	40000.0
Test3 (Type Tests)	22000.0
Test4 (Type Tests)	42000.0
Test5 (Type Tests)	24000.0
10.1 (Core Identification)	2000.0
Cl.15.1(f) (Insulation Resistance at Ambient Temperature)	2000.0
Type Tests-4Core-FRLSH (Type Tests)	46000.0
Test (Tests)	15000.0
Tests (Tests)	17000.0
Test (Tests)	11500.0
Tests (Tests)	12500.0
Tests (Tests)	21500.0
Tests2 (Tests)	17500.0
Test (HighVoltage Test at Room Temperature)	8000.0
Test (Insulation Resistance Test)	4000.0
Test (Test)	3000.0
Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.)	37000.0
Type Tests (Type Tests along with Oxygen index,Temperature Index and Test for halogen acid gas evolution.)	41000.0
Tests (Tests)	16000.0
Tests (Tests)	27000.0
Tests (Tests)	31000.0
Type tests as per IS 7098(Part-1):1988,Reaffirmed 2020,Amendment No.5 along with Fire Properties: a) Oxygen index test ,b) Flame retardance test on single cable,c) Smoke density,d) Test for halogen acid gas evolution and e) Temperature index. (Tests)	86000.0
Tests (Tests)	5000.0
Tests (Type Tests,Category-01 and Optional Tests)	36500.0
Tests (Acceptance Tests,Category-C2.)	83000.0
Tests (Test for thickness of insulation and sheath,Resistance test,Hot Set Test,Insulation resistance (volume resistivity test) at Room Temperature and High Voltage Test at Room Temperature)	8000.0
Tests (Type Tests along with Oxygen index test ,Flame retardance test on single cable,Flame retardance test on bunched cable,Smoke density,Test for halogen acid gas evolution,Temperature index.)	92000.0
Tests (Insulation Resistance Test and High Voltage Test at ambient Temperature.)	6000.0
Conductor Resistance Test (Tests)	4000.0
1.Conductor resistance test, 2. Test for thickness of insulation and sheath, 3. Tensile Strength and elongation at break test for insulation and sheath. 4. High voltage test, 5. Insulation resistance (volume resistivity) test. (Tests)	9500.0
Tests (d) Conductor resistance tests, e) Test for thickness of insulation (eccentricity) and sheath, f) Hot set test for insulation, g) Tensile strength and elongation at break test for insulation and outer sheath and k) Insulation resistance (volume resistivity) test})	10500.0
Tests(single Core) (Hot Set Test,Test for thickness of Insulation & Sheath,Tensile Strength & Elongation at break and weight.)	5000.0
Routine Test (Conductor Resistance Test and High Voltage Test)	10000.0
Tests (Acceptance Tests: Conductor resistance test,Test for thickness of insulation and sheath ,Tensile strength and elongation at break test for insulation and sheath.High voltage test, and Insulation resistance (volume resistivity) test.)	14500.0

1994

National Test House (NER), Guwahati

IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1995

National Test House (ER), Kolkata

EURAMET cg-2 (2011) - CALIBRATION OF GAUGE BLOCK COMPARATORS

CALIBRATION OF GAUGE BLOCK COMPARATORS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Length)	15000.0

1996

National Test House (WR), Mumbai

Customized specification for Polycarbonate seal - Customized specification for Polycarbonate seal

Customized specification for Polycarbonate seal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Breaking Strength ( On the lines of ASTM D 638 )-Breaking load between wire and seal in tension)	3000.0
- (Corrosive Resistance Test(On the lines of ASTM D 543-14))	2000.0
- (Heat Resistance Test(On the lines of ASTM D 3045-92))	2000.0

1997

National Test House (ER), Kolkata

Custom equaliser valve upper casing - Equaliser valve upper casing

Equaliser valve upper casing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon %)	1000.0
2 (Manganese %)	1000.0
3 (Silicon %)	1000.0
4 (Chromium %)	1000.0
5 (Nickel %)	1000.0
6 (Copper %)	1000.0
7 (Magnesium %)	1000.0

1998

National Test House (ER), Kolkata

FCO 1985 (as amended upto November 2023) - FCO 1985 (as amended upto October 2024)

FCO 1985 (as amended upto October 2024)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Total Nitrogen)	1000.0
2 (Ammoniacal Nitrogen)	1000.0
3 (Nitrate Nitrogen)	1000.0
4 (Urea Nitrogen)	1000.0
5 (Total phosphorous (as P2O5) percent by weight)	1000.0
6 (Water soluble phosphorous (as P2O5) percent by weight)	1000.0
7 (Available phosphorous (as P2O5) percent by weight)	1000.0
8 (Moisture percent by weight)	1000.0
9 (Sulphate Sulphur (as S))	1000.0
10 (Elemental Sulphur (as S) percent by weight)	1000.0
11 (Total elemental sulphur (as S), percent by weight)	1000.0
12 (Free acidity (as H2SO4) percent by weight)	1000.0
12 (Water soluble potassium as K2O, Percent by weight)	1000.0
13 (Particle size -material retained between 1mm and 4mm IS sieve)	1000.0
14 (Total Sulphur , Percent by weight)	1000.0
15 (Calcium Nitrate, Percent by weight)	1000.0
16 (Free phosphoric acid (as P2O5) percent by weight)	1000.0
17 (Magnesium as Mg , percent by weight)	1000.0
18 (Magnesium as MgO , percent by weight)	1000.0
19 (Magnesium as MgCl2, percent by weight)	1000.0
20 (Sodium as NaCl percent by weight)	1000.0
21 (Total Chlorides, as Cl percent by weight)	1000.0
22 (Matter insoluble in water, percent by weight)	1000.0
23 (pH of 5% solution)	1000.0
24 (As as As % by weight)	1000.0
25 (As as As2O3, % by weight)	1000.0
26 (Specific gravity at given temperature)	1000.0
27 (Biuret % by weight)	1000.0
28 (Particle size, percent retained between given IS sieves)	1000.0
29 (Manganese as Mn % by weight)	1000.0
30 (Zinc as Zn % by weight)	1000.0
31 (Zinc as Zn % by weight in the form of Zn EDTA)	1000.0
32 (Zinc as Zn % by weight in the form of Zn HEDP)	1000.0
33 (Iron/Fe as Fe % by weight in the form of FeHEDP)	1000.0
35 (Lead as Pb % by weight)	1000.0
36 (Cadmium as Cd % by weight)	1000.0
37 (Copper as Cu % by weight)	1000.0
38 (Iron as Fe % by weight)	1000.0
39 (Boron as B % by weight)	1000.0
40 (Calcium as Ca % by weight)	1000.0
12.1 (Molybdenum)	1000.0
55 (Fe as Fe-EDTA)	1000.0
56 (Appearance)	1000.0
1 (Total Nitrogen(ammoniacal and Urea)percent by weight)	1000.0
15 (Particle size-Minimum 90% of material shall be retained between 1mm and 4 mm IS sieve)	1000.0
1 (Carbon (% by mass))	1000.0
1 (Carbon : NItrogen ratio (C: N))	1000.0
1 (Bulk density)	1200.0
1 (Total organic carbon)	1200.0
1 (Manganese as Mn (% by mass))	1200.0
1 (Contamination level)	1200.0
1 (Efficiency Character)	1200.0
0 (Available Phosphorus (as P2O5),)	1000.0

1999

National Test House (NR), Ghaziabad

IRS-M-39-2000 (2000) - INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS

INDIAN RAILWAY STANDARD SPECIFICATION FOR CLASSIFICATION, TESTING AND ACEPTANCE CRITERIA OF WIRE AND FLUX FOR SUBMERGED ARC WELDING OF STRUCTURAL STEEL FOR USE ON INDIAN RAILWAYS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7.3.3 (Radiographic Examination)	2000.0
5.7.3.3 (Radiographic Examination)	4000.0

2000

National Test House (ER), Kolkata

IS 1321 : Part 1 (2003) - Sisal ropes – Specification Part 1 Untarred varieties (fourth revision)

Sisal ropes – Specification Part 1 Untarred varieties (fourth revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Identification of Fiber)	2000.0
5.2 (Count of the Yarn)	1000.0
5.3 (No of Yarns per Strand)	500.0
5.3 (Lay of Strand)	500.0
5.4 (No. of Strands in the Rope)	500.0
5.4 (Lay of Rope)	500.0
5.4.1 (Angle of Lay)	1000.0
5.5 (Percentage of Lubricant)	2000.0
5.6 (Zinc Content)	1000.0
5.6 (Copper Content.)	1000.0
6.1 (Mass of the Coil)	1000.0
6.2 (Pitch)	1000.0
6.3 (Length of the Coil)	1000.0
6.4 (Linear Density of Rope)	1000.0
6.4 (Breaking Strength Of Rope)	5000.0
6.5 (Diameter of Rope)	500.0

2001

National Test House (WR), Mumbai

IS 10322 : Part 1 (2014) - Luminaires: Part 1 general requirements and tests (First Revision)

Luminaires: Part 1 general requirements and tests (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

2002

National Test House (WR), Mumbai

IS 374 (2019) - Specification for electric ceiling type fans and regulators (Third Revision)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

2003

National Test House (WR), Mumbai

Customer Specification - Electrical product

Electrical product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	75000.0
1 (As per Customer request)	20000.0
1 (As per customer requirement)	40000.0

2004

National Test House (ER), Kolkata

Custom-24-ER-LM - Pull out Test for Assembly

Pull out Test for Assembly

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Pull out Test for Assembly)	5000.0

2005

National Test House (ER), Kolkata

Custom- Driers Pb,Mn,Cu,Co - Custom- Driers Pb,Mn,Cu,Co

Custom- Driers Pb,Mn,Cu,Co

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Lead ,percent by mass)	1200.0
2 (Cobalt, percent by mass)	1200.0
3 (Manganese percent by mass)	1200.0
4 (Copper percent by mass)	1200.0

2006

National Test House (NER), Guwahati

IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Mass of Zinc Coating, (g/m2))	2000.0
9.3 (Determination of Uniformity of Galvanizing Coating)	1000.0

2007

National Test House (ER), Kolkata

IS 2372:2021 - Timber for Cooling Towers-Specification

Timber for Cooling Towers-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.T1.3 (Species of Timber)	5000.0
4.T1.4 (Permissible stress-Bending and Tension Along Grain, Extreme Fibre stress)	3000.0
5.1 (Grading of Timber & defects in timber)	5000.0
6 (Dimension and Tolerances)	1000.0
7 (Treatment (IS 401:2001))	4000.0
7.1 (Depth of Penetration of Preservative)	1000.0

2008

National Test House (ER), Kolkata

1540 part-2 - QUICKLIME AND HYDRATED LIME FOR CHEMICAL INDUSTRIES SPECIFICATION

QUICKLIME AND HYDRATED LIME FOR CHEMICAL INDUSTRIES SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (ii) (Available lime [ as Ca (OH)2, percent by mass,)	2000.0

2009

National Test House (NR), Ghaziabad

IS 6649 (1985) - Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Rockwell C/ Vickers)	2000.0
8 (Mass of zinc coating)	2000.0
3 (Chemical Composition as per IS 1570 Part-2.)	500.0
3 (Inner Diameter, (Φ d1))	500.0
3 (Outer Diameter, (Φ d2))	500.0
8 (Uniformity of Coating)	1000.0
3 (Thickness, S)	500.0

2010

National Test House (NR), Ghaziabad

IS 164 (2015) - Ready mixed paint for road marking - Specification (Second Revision)

Ready mixed paint for road marking - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6.2.2 (Toxic metals as Pb Cd Cr: (Atomic Absorption Spectrophotometric methods))	2000.0
5.6.2.1 (Volatile Organic Compounds (VOC): (IS 101 (Part 2/Sec 1) and IS 101 (Part 2/Sec 2)))	3000.0
xii (Keeping properties (IS 101 (Part 6/Sec 2)))	5000.0
xi (Mass in kg/10 litre, (IS 101 (Part 1/Sec 7)))	500.0
x (Flash point (IS 101 (Part 1/Sec 6)))	600.0
ix (Residue on sieve, Max, (IS 101 (Part 8/Sec 1)))	500.0
viii-b (Resistance to wear a) For Grade 2 (as refer in IS 164))	1000.0
viii-a (Resistance to wear a) For Grade 1 (As refer in IS 164))	1000.0
vii (Recoating property (As refer in IS 164))	600.0
vi (Resistance to bleeding (As refer in IS 164))	500.0
v (Wet Opacity (IS 101 (Part 4/Sec 1)))	600.0
iv (Colour (IS 101 (Part 4/Sec 2)))	500.0
iii (Finish (IS 101 (Part 3/Sec 4)))	500.0
ii (Consistency (Annex D))	500.0
i (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
5.5 table 1 i (Drying time, Max a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
5.4 (Lead Restriction, Max, (IS 101 (Part 8/Sec 5)))	1200.0
5.2 (Applications (Annex B))	500.0