NTH - Management Information System

National Test House (WR), Mumbai

Plot No. F 10, M.I.D.C, Marol, Andheri (E), Mumbai Maharashtra - 400093, Mumbai, Mumbai, Maharashtra, 400093

28260927 director-mum[at]nth[dot]gov[dot]in

Scope List

Reset

659 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

271

IS 1367 : Part 3 (2017) - Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Composition, % by mass)	2500.0
7 (Surface Integrity (Table 3 in accordance with ISO 6157 - 1 ))	1200.0
7 (Mechanical and physical properties (tensile Strength))	3000.0
7 (Mechanical and physical properties (ultimate tensile load))	2000.0
7 (Mechanical and physical properties (Proof load test))	1000.0
7 (Mechanical and physical properties (Hardness,Rockwell C scale))	2000.0
7 (Mechanical and physical properties (Hardness,Vickers))	2000.0

272

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Surface Integrity)	1200.0
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
7, Table 6 (Rockwell hardness, HRC)	2000.0
6 (Chemical composition, % by mass)	2500.0

273

IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Surface Integrity)	1200.0
7 (Hardness Test)	2000.0
7 (Wedge loading test)	3000.0
7 (Proof Load, N.)	3000.0
7 (Tensile load, N.)	3000.0
2 (Dimensions)	1500.0
6 (Carbon, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
6 (Boron, % by mass)	625.0

274

IS 1367 : Part 13 (2020) - Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Coating Thickness)	2000.0

275

IS 11688:2022 (2022) - Standard Newsprint-Specification

Standard Newsprint-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per clause no.6.2 of IS 11688:2022 (Grammage, gm/sq. m.(as per IS 1060(Part 5/Sec 5)))	1000.0
As per table 1 sl.no. (i)of IS 11688:2022 (Brightness ISO, Percent(as per IS 1060(Part 4/Sec 13)))	2000.0
As per table 1 sl.no.(iii)of IS 11688:2022 (Smoothness(Bendtsen), ml./min.(as per IS 1060(Part 5/Sec 20)))	2000.0

276

ASTM D 2370 - Standard test methods for Tensile properties

Standard test methods for Tensile properties

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength and Elongation at Break)	2000.0

277

IS 14506 : 1998 (1998) - EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION

EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
EPOXY REDOXIDEZINCPHOSPHATE WELDABLEPRIMER,TWOCOMPONENTSPECIFICATION (Please refer annexure for the test result)	23000.0

278

IS 383 for coarse aggregate (2016) - Coarse and fine aggregate for concrete

Coarse and fine aggregate for concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1200.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
5.3 (Flakiness Index)	1500.0
5.3 (Elongation Index)	1500.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1200.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1200.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1200.0
12 (Organic Impurities)	1000.0

279

Custom specification for general chemical (WR) - Custom specification for general chemical (WR)

Custom specification for general chemical (WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for general chemical (WR) (Please see Annexure)	5000.0

280

Custom specification for metal (Chemical) WR - Custom specification for metal (Chemical) WR

Custom specification for metal (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification for metal (Chemical) WR (Please see the annexure)	5000.0

281

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement - Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

Custom specification for Chemical analysis of high strength deformed steel bars and wires for concrete reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (CARBON)	1200.0
2 (SULPHUR)	1200.0
3 (PHOSPHOROUS)	1200.0
4 (SULPHUR & PHOSPHOROUS)	1200.0
5 (CARBON EQUIVALENT)	1200.0

282

Custom Specification for Sand (Chemical) WR - Custom Specification for Sand (Chemical) WR

Custom Specification for Sand (Chemical) WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure (Please see the Annexure)	5000.0

283

IS 14948 : 2001 (2001) - PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
PAINT COAL TAR EPOXY, TWO PACK, BLACK AND BROWN (BASE AND HARDNER) — SPECIFICATION (Please refer annexure for tests result)	45000.0

284

IS 16943 : 2019 (2019) - TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT — SPECIFICATION (Please refer annexure for test result)	30000.0

285

ASTM / IS / EN - Block Jointing Mortar

Block Jointing Mortar

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl. No. 6 of ASTM C 1660 - 2009 (Splitting Tensile Strength Test, Splitting Tensile Strength in N/mm^2)	5000.0
ASTM D 7234 (Pull out Adhesion Strength of mortar to block, MPa)	5000.0

286

IS 1285 (2023) - Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Chemical Analysis (as per IS 733))	5000.0
10 (Tensile Strength (as per IS 733))	1000.0
10 (0.2 % Proof Stress (as per IS 733))	1000.0
10 (% Elongation (as per IS 733))	1000.0
8 (Dimension)	1000.0
4 (Mass per meter)	1000.0
6 (Freedom from Defect)	1000.0
8 (Copper, % by mass)	600.0
8 (Magnesium, % by mass)	600.0
8 (Silicon, % by mass)	600.0
8 (Iron, % by mass)	600.0
8 (Manganese, % by mass)	600.0
8 (Zinc, % by mass)	600.0
8 (Titanium, % by mass)	600.0
8 (Others, % by mass)	600.0
8 (Chromium, % by mass)	600.0
8 (Aluminium, % by mass)	600.0
4 (Dry Film Thickness - Powder Coating as per IS 13871 by Test Method 5 of IS 101 Part-3 Sec.2 1989 or any other test method specified by the customer)	1500.0

287

IS 2086 (1993) - Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

288

Custom - Berger QUV test - QUV test of Paint and Coating

QUV test of Paint and Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-2 (Salt spry for 96 hrs)	5000.0

289

IS 2086 (1993) - Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

Carriers and Bases in Electrical Fuses for voltages up to 650 V - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (All possible tests as per customer requirement)	20000.0

290

IS 9968 : Part 1 (1984) - Elastomer Insulated Cables

Elastomer Insulated Cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.2 (Conductor Resistance)	2000.0
21.1 (Insulation resistance)	1000.0
22.1 (High voltage (water immersion) test)	1000.0
22.1 (Flammability test)	1000.0

291

IS 3384 (1986) - bitumen primer for use in waterproofing and damp-proofing

bitumen primer for use in waterproofing and damp-proofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1(v)c (Test on residue from distillation upto 360 dg , c)matter soluble in carbon disulphide or ccl4 or tce)	1200.0
3.1(v)b (Test on residue from distillation upto 360 dg , b)penetration 25 dg 100g 5 sec)	1200.0
3.1(v) a (Test on residue from distillation upto 360 dg , a)ductility)	1200.0
3.1(iv) (water Content )	1200.0
3.1(iii) (Flash point pensky martens closed type)	1200.0
ADDITIONAL pARAMETER (Specific gravity)	1200.0

292

IS 7193:2013 - Glass Fibre Base Bitumen Felts

Glass Fibre Base Bitumen Felts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 Table 3(Sl.no. i) (Breaking Load(warp direction) as per IS 13826(Part 1))	2000.0
8 Table 3(Sl.no. i) (Breaking Load(weft direction) as per IS 13826(Part 1))	2000.0
8 Table 3(Sl.no. ii) (Pliability at 23 ±1°C as per IS 13826(Part 2))	2000.0
8 Table 3(Sl.no. iii) (Storage Sticking as per IS 13826(Part 3))	2000.0
8 Table 3(Sl.no. iv) (Pressure Head test(conditioned at 5°C) as per IS 13826(Part 4))	2000.0
8 Table 3(Sl.no. iv) (Pressure Head test(conditioned at 65°C) as per IS 13826(Part 4))	2000.0
8 Table 3(Sl.no. v) (Heat resistance at 68±2°C as per IS 13826(Part 5))	2000.0
8 Table 3(Sl.no. vi) (Water absorption percent as per IS 13826(Part 6))	2000.0
7.1 (Dimensions(Length and Width))	1000.0
7.2 (Weight)	1000.0

293

IS 1254 (2007) - Corrugated aluminium sheet (Fourth Revision)

Corrugated aluminium sheet (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Aluminium)	500.0
7 (Dimension)	1000.0

294

IS 737 (2008) - Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Analysis (Please see Annexure)- NABL)	6000.0
7.2 (Bend Test)	1000.0
7.1 (% Elongation at 50 mm gauge length)	500.0
7.1 (0.2% Proof Stress)	1000.0
7.1 (Tensile Strength)	1000.0
9 (Dimensions)	1000.0
6 (Chemical Analysis (Please see Annexure)- NABL)	6000.0
6 (Titanium)	1000.0
6 (Silicon)	1000.0
6 (Manganese)	1000.0
6 (Chromium)	1000.0
6 (Magnesium)	1000.0
6 (Iron)	1000.0
6 (Copper)	1000.0
6 (Zinc)	1000.0
6 (Aluminium)	1000.0
6 (Chemical composition, Cu+Si+Fe for designation 19990.)	1000.0
6 (Chemical composition, Cu+Si+Fe+Mn+Zn for Designation 19800)	1000.0
6,Table1 (Chemical Composition (Please see Annexure) - NON NABL)	2500.0
6 (Chemical composition, Cr+Mn for Designation 55000)	2500.0

295

IS 2553 : PART 1 (1990) - SAFETY GLASS PART 1 ARCHITECTURAL, BUILDING AND GENERAL USES

SAFETY GLASS PART 1 ARCHITECTURAL, BUILDING AND GENERAL USES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

296

IS 2553(1):2018 & IS 17004:2018 (2018) - SAFETY GLASS — SPECIFICATION PART 1 ARCHITECTURAL, BUILDING AND GENERAL USES & TESTING METHODS FOR PROCESSED GLASS

SAFETY GLASS — SPECIFICATION PART 1 ARCHITECTURAL, BUILDING AND GENERAL USES & TESTING METHODS FOR PROCESSED GLASS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

297

Fibre Glass Insulation - Fibre Glass Insulation

Fibre Glass Insulation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness(mm.))	1000.0

298

Nitrile Rubber - Nitrile Rubber

Nitrile Rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Thickness)	1000.0

299

IS 14589 (1999) - ZINC PRIMING PAINT, EPOXY BASED, (TWO-PACK) -SPECIFICATION

ZINC PRIMING PAINT, EPOXY BASED, (TWO-PACK) -SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ZINC PRIMING PAINT, EPOXY BASED, TWO-PACK - SPECIFICATION (Please refer annexure for tests result)	23000.0

300

IS 14209 (2016) - Epoxy Enamel, Two Component, Glossy — Specification

Epoxy Enamel, Two Component, Glossy — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Epoxy Enamel, Two Component, Glossy — Specification (Please refer annexure for tests result)	30000.0