NTH - Management Information System

National Test House (WR), Mumbai

Plot No. F 10, M.I.D.C, Marol, Andheri (E), Mumbai Maharashtra - 400093, Mumbai, Mumbai, Maharashtra, 400093

28260927 director-mum[at]nth[dot]gov[dot]in

Scope List

Reset

659 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

391

ASTM D 638 - Tensile Properties Of Plastics

Tensile Properties Of Plastics

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength (Test method: ASTM D 638 ))	2000.0

392

IRC 105 (2019) - SPECIFICATIONS FOR DENSE BITUMINOUS MACADAM AND BITUMINOUS CONCRETE FOR AIRFIELD PAVEMENTS

SPECIFICATIONS FOR DENSE BITUMINOUS MACADAM AND BITUMINOUS CONCRETE FOR AIRFIELD PAVEMENTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Thickness of DBM, in mm)	1000.0
2 (Thickness of DAC I, in mm)	1000.0
2 (Thickness of DAC II, in mm)	1000.0
3.1.5 (Bitumen Content of DBM, %)	2000.0
3.1.5 (Bitumen content of BC (DAC I), %)	2000.0
3.1.5 (Bitumen Content of BC, %)	2000.0
2 (Density of DAC (On lines of ASTM D 2726))	2000.0
2 (Density of DBM (On lines of ASTM D 2726))	2000.0
Table 3.5 (Cleanliness, Grain Size Analysis [IS 2386 (Part 1)], %)	2000.0
Table 3.5 (Particle Shape (Combined Flakiness and Elongation Index), %)	3000.0
Table 3.5 (Strength [Los Angeles Abrasion Value], %)	1500.0
Table 3.5 (Strength [Aggregate Impact Value], %)	1500.0
Table 3.5 (Water Absorption, %)	1000.0
Table 3.5 (Durability [ Soundness (Sodium sulphate )], %)	2000.0
Table 3.5 (Durability [Soundness (Magnesium or Sodium Sulphate )], %)	2000.0
3.1.5 (Bitumen Content of BC, %)	2000.0

393

Customer Requirement - Customer Requirement

Customer Requirement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Customer Requirement)	30000.0

394

Custom IS / ASTM - Testing on coating Materials to be used with cement / concrete

Testing on coating Materials to be used with cement / concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 2770 (Pull out Test [IS 2770 (Part 1)], % increase with respect to plain bar.)	10000.0
ASTM D 4541 (Pull off Adhesion Test (ASTM D 4541 - 2009), Pull off Adhesion Strength against concrete, MPa)	5000.0

395

NTH(WR)/MECH/CUSTOM/005 (2023) - Custom Specification for HSFG Bolt, Nut and Washer

Custom Specification for HSFG Bolt, Nut and Washer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
16 (Chemical Composition of HSFG Bolts)	5000.0
17 (Chemical Composition of HSFG Nuts)	5000.0
18 (Chemical Composition of HSFG Washers)	5000.0
1 (Visual Examination as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	1000.0
2 (Dimensions as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	1000.0
3 (Hardness test as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	3000.0
4 (Yield Strength as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	1000.0
5 (Tensile Strength as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	1000.0
6 (Percentage of Elongation as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	1000.0
7 (Proof Load as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	3000.0
8 (Visual Examination as per IS 6649-1985 or Relevant Standard or Custom Spec.)	1000.0
9 (Dimensions as per IS 6649-1985 or Relevant Standard or Custom Spec.)	1000.0
10 (Hardness as per IS 6649-1985 or Relevant Standard or Custom Spec.)	2000.0
11 (General Requirements as per IS 6649-1985 or Relevant Standard or Custom Spec.)	2000.0
12 (Visual Examination Dimensions as per IS 6623-2004 or Relevant Standard or Custom Spec.)	1000.0
13 (Dimensions as per IS 6623-2004 or Relevant Standard or Custom Spec.)	1000.0
14 (Hardness as per IS 6623-2004 or Relevant Standard or Custom Spec.)	2000.0
15 (Torque Test as per IS 1367 Part 3 or Relevant Standard or Custom Spec.)	2000.0

396

2933 (Part 1) (2013) - Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications

Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Lead Restriction, (IS 101 (Part 8/Sec 5))	700.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (a) Consistency, (Annex C))	1000.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (b) Viscosity by ford cup No. 4 at (27 +/- 2 deg C), (IS 101 (Part 1/Sec 5)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Mass, kg/10 litre, Min, (IS 101 (Part 1/Sec 7)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : c) Tack free (IS 101 (Part 3/Sec 1)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Wet opacity, Min, (IS 101 (Part 4/Sec 1)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Finish, (IS 101 (Part 3/Sec 4)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Fineness of grind, Max (IS 101 (Part 3/Sec 5)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Colour, (IS 101 (Part 4/Sec 2)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Water content (if water is suspected to be present), Max, (IS 101 (Part 2/Sec 1)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: a) Scratch hardness, (Load 1000 g), clause 3 of (IS 101 (Part 5/Sec 2)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: b) Bend test, (with 6.25 mm Dia Mandrel in type 1 apparatus), clause 2 of (IS 101 (Part 5/Sec 2)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Striping test (Annex D))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flash Point, (IS 101 (Part 1/Sec 6)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Keeping properties , (IS 101 (Part 6/Sec 2)))	5000.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Accelerated Weathering test (Xenon arc ) (clause no. 6.2 of IS 2933 (Part 1)))	21600.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Normal Outdoor Exposure test for 12 Months (Annex B-3))	10000.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total non-volatile matter, (IS 101 (Part 8/Sec 2)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total pigment content)	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Phthalic anhydride content of the non-volatile vehicle, (IS 101 (Part 8/Sec 4)))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure)	1.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Gloss (specular 60 deg), (IS 101 (Part 4/Sec 4)))	500.0

397

IS 14333 - High Density Polyethylene Pipe For Sewerage -

High Density Polyethylene Pipe For Sewerage -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4 (Melt Flow Rate (IS:14333 & IS:2530))	2000.0
8.2 (Reversion Test (IS:14333 & IS:4984))	1000.0
7.4 (Outside Diameter (IS:14333 & IS:4984))	500.0
7.4 (Wall Thickness (IS:14333 & IS:4984))	500.0
8.5 (Carbon Black Content and Dispersion)	2000.0
8.6 (Density (IS:14333 & IS:7328))	2000.0

398

ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength)	2000.0
- (Elongation (Both directions))	2000.0

399

IS 1848 : Part 2 (2018) - Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Substance (Grammage),)	1000.0

400

IS 1528 (2010) - Refractory materials

Refractory materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 4 (Cold Crushing Strength (as per IS 1528 (Part 4): 2012), in N/mm^2)	2500.0
Part 8 / Part 15 (Apparent Porosity [on the lines of IS 1528 (Part 8)/ IS 1528 (Part 15)], %)	1000.0

401

ASTM D 257 (1999) - Solid insulating materials

Solid insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Solid insulating materials)	1000.0

402

ISO / EN / ASTM - Custom Specn Adhesive / Coating NTH(WR)

Custom Specn Adhesive / Coating NTH(WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Pull out test of coating, (ISO 4624), N/mm^2)	5000.0
8 (Pull-off Adhesion Strength of Coating on Concrete (on the lines of ASTM D 7234-12), MPa)	5000.0
8 (Average Tensile Strength (on the lines of ASTM D 412), N/mm^2)	2000.0
8 (Average Elongation at Break (on the lines of ASTM D 412), in %)	2000.0
5 (Depth of Permeability of Water under pressure (on lines of BS EN 12390), in mm)	10000.0
5 (Depth of Permeability of Water under pressure-comparison with controlled specimen (on lines of BS EN 12390), in mm)	15000.0

403

MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
505 (Thickness of Dense Bituminous Macadam (DBM), in mm)	1000.0
507 (Thickness of Bituminous Concrete Layer (BC), in mm)	1000.0
505 (Combined Density of Dense Bituminous Macadam (DBM) & BC, in g/cc)	2000.0
505 (Binder Content of DBM, in %)	3000.0
507 (Bitumen Content of BC, in %)	3000.0
507 (Thickness of DBM Layer (BC), in mm)	1000.0
505 (Density DBM (ASTM-D2726))	2000.0
507 (Density of BC (ASTM-D2726))	2000.0
Binder Content of SDAC (Binder content of Semi Dense Asphaltic Concrete)	3000.0
Binder Content DAC (Binder content of Dense Asphaltic Concrete)	3000.0
505 (Binder Content of DBM, in %)	3000.0
Density of SDAC (Density of Semi Dense Asphaltic Concrete)	2000.0
Density DAC (Density of Dense Asphaltic Concrete.)	2000.0
CLAUSE-1,Table-1 (Cutting & Preparation of Core sample-Single Stage)	1000.0

404

Cust Specn Adhesive - Custom Specification for Adhesive NTH(WR)

Custom Specification for Adhesive NTH(WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM (Accelerated Weathering Test by Xenon Arc (500 hr))	30000.0
IS 15477 (Modified Adhesion Test before exposure to Accelerated Weathering Test, N)	8000.0
IS 15477 (Modified Adhesion Test after exposure to Accelerated Weathering Test, N)	8000.0
ASTM (Accelerated Weathering Test by Xenon Arc (250 hr))	15000.0
ASTM D 4541 / 7234 (Pull off Adhesion Strength of coating (a) Control sample (b) Coated Sample.)	10000.0

405

RDSO SPECIFICATION No. M&C/PCN/123/2018 (2018) - SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Weight per epoxy equivalent on non-volatile vehicle content basis (Cl.4 of IS:9162-1979))	3500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) a) Surface dry (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) b) Recoating time (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at (27+/-2 deg C) c) Hard dry (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Drying time at 27(+/-2 deg C) d) Curing time (IS: 101 (Pt. 3/Sec.1)-1986)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Consistency (IS: 101 (Pt. 1/Sec. 5)-1989)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Finish (IS: 101 (Pt. 3/Sec. 4)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Colour (IS: 101 (Pt. 4/Sec. 2)-1989)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Dry film thickness per coat, by brush/air/airless spray (IS: 101 (Pt.3/Sec.2)-1989 By Elecometer Thickness gauge meter)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Volume solids, Appendix-I of RDSO SPECIFICATION No.M&C/PCN/123/2018)	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Scratch hardness (at 1.5 Kg load) (IS: 101 Pt.5/Sec.2)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flexibility & Adhesion (6.25 mm Mandrel) (IS: 101 Pt.5/Sec.2)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Flash point for both the packs (IS: 101 (Pt.1/Sec. 6)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to salt spray for 3000 hours (ASTM: B-117))	100000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Protection against corrosion under condition of condensation for 3000 hours (IS: 101 (Pt. 6/Sec.1)-1988)	75000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Keeping properties for both the packs (IS : 101 (Pt. 6/Sec.2)-1989)	5000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min i) 100 micron DFT (IS: 101 (Pt.4/Sec.1)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Covering Capacity, min ii) 75 micron DFT (IS: 101 (Pt.4/Sec.1)-1988)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals i) 25% caustic soda solution (w/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals ii) 30% sulphuric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iii) 20% hydrochloric acid solution (v/v) for 1800 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Resistance to chemicals iv) Resistance to tap Water for 3000 hrs, Appendix-II of RDSO SPECIFICATION No.M&C/PCN/123/2018)	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pot life at 27(+/-2) deg C, min. Appendix-III of RDSO SPECIFICATION No.M&C/PCN/123/2018)	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Mass in kg/10 litres, min, (IS : 101 (Pt. 1/Sec.7)-1987)	1200.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Impact resistance test at height 31 inch and weight 3.226 pound) (100 inch pound load), (ASTM D 2794))	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Cathodic disbondment test, max)	10000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Abrasion Resistance test for 1000 cycles with CS-17 wheels & 1.0 Kg load (ASTM D 4060))	3000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion test (ASTM D 3359))	1500.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Adhesion & Compatibility test with Acrylic Polyurethane Paint (ASTM D 3359 & Appendix -IV))	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Pull of Adhesion test, Min (ASTM D 4541))	2000.0
RDSO SPECIFICATION No.M&C/PCN/123/2018 (Please refer annexure for test result as per RDSO SPECIFICATION No.M&C/PCN/123/2018)	1.0

406

RDSO SPEC M&C/PCN/103/2020 (2020) - SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK)

SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

407

266 (1993 (RA2020)) - Sulphuric Acid

Sulphuric Acid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 and 4.3 (i) (Total Acidity (as H2SO4))	1000.0
4.2 and 4.3 (ii) (Residue on Ignition)	500.0
4.2 and 4.3 (iii) (Iron (as Fe))	500.0
4.2 and 4.3 (iv) (Chlorides (as Cl))	500.0
4.2 and 4.3 (v) (Lead (as Pb))	1.0
4.2 and 4.3 (vi) (Arsenic (as As))	500.0
4.2 and 4.3 (vii) (Oxidizable Impurities (as SO2))	500.0
4.2 and 4.3 (viii) (Organic Matter)	500.0
4.2 and 4.3 (ix) (Nitrates (as NO2))	500.0
4.2 and 4.3 (x) (Ammonia (as NH3))	500.0
4.2 and 4.3 (xi) (Selenium (as Se))	500.0
4.2 and 4.3 (xii) (Manganese (as Mn))	500.0
4.2 and 4.3 (xiii) (Copper (as Cu))	500.0
4.2 and4.3 (xiv) (Zinc (as Zn))	500.0
4.2 and 4.3 (xv) (Nitrates, Nitrites, and Ammonia (as N))	500.0
4.1.3 (Preliminary Examination)	500.0
Specific Gravity (Specific Gravity)	500.0
TEST RESULTS AS PER ANNEXURE (TEST RESULTS AS PER ANNEXURE)	5000.0

408

Customized specification for Polycarbonate seal - Customized specification for Polycarbonate seal

Customized specification for Polycarbonate seal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Breaking Strength ( On the lines of ASTM D 638 )-Breaking load between wire and seal in tension)	3000.0
- (Corrosive Resistance Test(On the lines of ASTM D 543-14))	2000.0
- (Heat Resistance Test(On the lines of ASTM D 3045-92))	2000.0

409

IS 10322 : Part 1 (2014) - Luminaires: Part 1 general requirements and tests (First Revision)

Luminaires: Part 1 general requirements and tests (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

410

IS 374 (2019) - Specification for electric ceiling type fans and regulators (Third Revision)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

411

Customer Specification - Electrical product

Electrical product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	75000.0
1 (As per Customer request)	20000.0
1 (As per customer requirement)	40000.0

412

ONGC Specification for protective coating (2005) - ONGC Offshore Design Section: Specification for protective coating

ONGC Offshore Design Section: Specification for protective coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ONGC Specification for protective coating (Touch Dry at 25 deg C (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Hard Dry at 25 Deg C (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Over Coating Interval (ASTM D 1640))	1200.0
ONGC Specification for protective coating (Pot Life at 25 Deg C)	1500.0
ONGC Specification for protective coating (Dry Film Thickness, per coat)	1200.0
ONGC Specification for protective coating (Volume Solid (ISO 3233))	2000.0
ONGC Specification for protective coating (Theoretical Covering Capacity)	1200.0
ONGC Specification for protective coating (Weight Per liter (ISO 2811))	1200.0
ONGC Specification for protective coating (Temperature Resistance (ASTM D 2485 Method A))	5000.0

413

Civil lab Training - Evaluation of Building Materials through Quality Testing & Standard specification-Training

Evaluation of Building Materials through Quality Testing & Standard specification-Training

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Training)	5000.0

414

IS 2046 (1995) - Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Colour and pattern)	1000.0
5.2.1 (Surface Finish)	1000.0
5.3 (Thickness)	1000.0
5.4.1 (Surface Defects)	1000.0
5.5 (Resistance to suface wear)	3000.0
5.5 (Resistance to immersion in Boiling water(mass increase))	2000.0
5.5 (Resistance to immersion in Boiling water(thickness increase))	1000.0
5.5 (Resistance to immersion in boiling water (Appearance))	500.0
5.5.3 (Resistance to Dry Heat at 180 degC.)	2000.0
5.5 (Dimensional Stability at Elevated Temperature (L))	1500.0
5.5 (Dimensional Stability at Elevated Temperature(T))	1500.0
5.5 (Dimensional Stability at 20 degC(L))	1000.0
5.5 (Dimentional Stability at 20 degC(T))	1000.0
5.5 (Resistance to Cracking)	2000.0
5.5 (Resistance to Scratching)	2000.0
5.5 (Resistance to Staining)	5000.0
5.5 (Resistance to colour change in Xenon arc light)	3000.0
5.5 (Resistance to Cigarate Burns)	2000.0
5.5 (Resistance to Steam)	2000.0
- (Density)	1000.0
5.5 (Tensile strength)	4000.0
5.5 (Flexural Strength)	4000.0
5.5 (Resistance to crazing)	1500.0
5.5 (Resistance to surface wear)	5000.0

415

IS 266 (1993) - Sulphuric acid - Specification (Third Revision)

Sulphuric acid - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Total Acidity (as H2SO4))	1000.0
4.2 (Residue on ignition)	1000.0
4.2 (Iron (as Fe))	1000.0
4.2 (Chlorides (as Cl))	1000.0
4.2 (Lead (as Pb))	1000.0
4.2 (Arsenic (as As))	1000.0
4.2 (Oxidizable impurities (as SO2))	1000.0
4.2 (Organic matter)	1000.0
4.2 (Nitrates (as NO3))	1000.0
4.2 (Ammonia (as NH3))	1000.0
4.2 (Selenium (as Se))	1000.0
4.2 (Manganese (as Mn))	1000.0
4.2 (Copper (as Cu))	1000.0
4.2 (Zinc (as Zn))	1000.0
4.2 (Nitrates, nitrites & ammonia (as N))	1000.0

416

IS 2046-IS 2046 (1995) - Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

417

NTH(WR)/MECH/CUSTOM/004 (2022) - Customer Specification- Dimension Measurement of Weight Per Litre Cup

Customer Specification- Dimension Measurement of Weight Per Litre Cup

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension Measurement of Weight Per Litre Cup)	2000.0
2 (Dimension Measurement of Weight Per Litre Cup)	4000.0

418

EN / BS - Method of test of Rock

Method of test of Rock

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 of EN 13383 (Part 2) (Determination of Particle Density (EN 13383-2:2013), Mg/m^3)	1500.0
8 of EN 13383 (Part 2) (Determination of Water Absorption (EN 13383-2:2013), %)	1500.0
8 of EN 1926 :2006 (Compressive strength (EN 1926 : 2006), MPa)	5000.0
8 of EN 1926 :2006 (Compressive strength normal to plane of anisotropy (EN 1926 : 2006), MPa)	5000.0
8 of EN 1926 :2006 (Compressive strength Parallel to plane of anisotropy (EN 1926 : 2006), MPa)	5000.0
5 of BS EN 1097 - 2 : 2010 (Determination of resistance to fragmentation by Los Angeles Test Method (BS EN 1097-2 : 2010), %)	2000.0
9 of BS EN 1367-2 : 2009 (Magnesium Sulphate Test (BS EN 1367 - 2 : 2009), MS Value in %)	4000.0

419

JIS K 6911 and Customer requirements - Sheet Molding Compound

Sheet Molding Compound

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Flexural Strength (JIS K 6911:1995))	4000.0
- (Water absorption test (JIS K 6911:1995))	2000.0
- (Appearance after boiling (JIS K 6911:1995))	2000.0
- (Specific Gravity (IS 8543(Part 1/Sec 2):1979))	1000.0
- (Withstand voltage flatwise (JIS K 6911:1995))	2000.0
- (Insulation resistance test at normal state and after boiling (JIS K 6911:1995))	3000.0

420

IS 1554 : Part 1 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Type Tests)	75000.0
15.1 (Type Test)	40000.0
15 (Type tests (Non FRLS))	25000.0