NTH - Management Information System

National Test House (WR), Mumbai

Plot No. F 10, M.I.D.C, Marol, Andheri (E), Mumbai Maharashtra - 400093, Mumbai, Mumbai, Maharashtra, 400093

28260927 director-mum[at]nth[dot]gov[dot]in

Scope List

Reset

659 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

451

IS 1848 : Paaaart 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Substance (Grammage), g/sq.m)	1000.0
4.6 (Brightness, %)	2000.0
4.6 (One Minute Cobb)	1000.0
4.6 (i) b (Tensile Index (MD))	1000.0
4.6 (i) a (Tensile Index (CD))	1000.0
4.6 (Opacity, %)	2000.0
4.6(ix) b (Tear Index (CD))	1000.0
4.6 (ix) a (Tear index(MD))	1000.0

452

IS 4658:(2019) (2019) - Specification for coated paper and board (Art And Chromo) (Second Revision)

Specification for coated paper and board (Art And Chromo) (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Substance (Grammage))	1000.0
5.5 (Brightness)	2000.0
5.5 (Burst Index )	2000.0
5.5 (Wax Pick)	2000.0
5.5 (Gloss)	1500.0
5.5 (Surface pH)	1000.0

453

F-16 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS

F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume soilds % minimum)	1200.0
2 (DFT per coat microns)	1200.0
3 (Theoretical covering capacity in m sq/coat/litre)	1200.0
4 (Weight per liter in kg/litre)	1200.0
5 (Touch dry at 30 Deg c max (hours))	1200.0
6 (Hard dry at 30 deg C max(hours))	1200.0
7 (Over coating interval , hours)	1200.0
8 (Potlife at 30 deg C for 2 comp paints, hours)	1200.0
9 (Temperature resistance 650 ⁰ C (ASTM D 2485 method B))	4200.0
10 (Non Volatile Matter (% by mass) Component-A (Base))	1200.0
11 (Non Volatile Matter (% by mass) Component-B (Hardener))	1200.0
12 (Volatile Matter (% by mass) Component-A (Base))	1200.0
13 (Volatile Matter (% by mass) Component-B (Hardener))	1200.0
14 (Specific Gravity Component-A (Base) (ASTM D1475))	1200.0
15 (Specific Gravity Component-B curing agent(ASTM D1475))	1200.0
16 (Ash Content (% by mass)Component-A (Base))	1200.0
17 (Ash Content (% by mass)Component-B (hardener ))	1200.0
F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS (F-16 Technical Name: Inert polymeric matrix coating suitable for under insulation for CS and SS. HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS- Please Refer Annexure)	16300.0

454

IS 1481 (2024) - Specification for metric steel scales for engineers (First Revision)

Specification for metric steel scales for engineers (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Length)	1200.0

455

IS 1828: Part 1 (2022) - METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Force)	6000.0
6 (Calibration of UTM (Tension Mode) up to 50kN - 1 Scale)	6000.0
6 (Force (for 4 Scale upto 100kN))	10000.0
6 (Force (for 5 Scale upto 100kN))	11000.0
6 (Force)	6000.0
6 (Force)	7000.0
6 (Force (for 2 Scale Above 100kN upto 1000kN))	8000.0
6 (Calibration of UTM Compression Mode Up to 500kN (1 Scale))	7000.0

456

IS 3601 (2006) - Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.5 (Drift Expansion)	1500.0
13.3, 13.4 (Bend Test)	1000.0
13.2 (Flattening test)	1000.0
10 (Dimensions, mm)	1000.0
8 (Straightness)	-
6 (Visual examination)	1000.0
13.1 (Tensile strength, MPa)	1000.0
13.1 (Yield stress, MPa)	1000.0
13.1 (% Elongation)	1000.0
4.1 (Sulphur)	1250.0
4.1 (Phosphorus)	1250.0
4 (Chemical composition, % by mass)	2500.0
10 (Outside diameter, mm)	1000.0
10 (Thickness, mm)	1000.0
10 (Weight, kg/m)	-
0 (Mass of Zinc Coating (g/m2 ))	2000.0
13.6 (Crushing Test as per IS 3601 or relevant specification)	1500.0

457

IS 4923 (2017) - Hollow steel sections for structural use - Specification (Third Revision)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.4 (Concavity and Convexity)	1000.0
15.2 (Tensile Strength, MPa)	1000.0
15.2 (Yield Strength, MPa)	1000.0
15.2 (Elongation, %)	1000.0
9.1 (Dimension, mm)	1000.0
9.1 (Weight, kg/m)	1000.0
10.2 (Outside Dimension (B), mm)	500.0
10.2 (Outside Dimension (H), mm)	-
10.3 (Thickness, mm)	500.0
10.5 (Squareness of sides, degree)	1000.0
10.6 (External Corner Radius.)	-
10.7 (Straightness and Twist)	1000.0
7 (Chemical Composition % by mass)	1500.0

458

IS 265 (2021) - HYDROCHLORIC ACID SPECIFICATION Fifth Revision

HYDROCHLORIC ACID SPECIFICATION Fifth Revision

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.2, 4.2 and 5.2.2 (i) (Total acidity (as HCl))	1000.0
4.1.2, 4.2 and 5.2.2 (ii) (Residue on ignition)	400.0
4.1.2, 4.2 and 5.2.2 (iii) (Sulphates (as H2SO4))	400.0
4.1.2, 4.2 and 5.2.2 (iv) (Iron (as Fe))	400.0
4.1.2, 4.2 and 5.2.2 (v) (Free Chlorine and Bromine (as Cl))	400.0
4.1.2, 4.2 and 5.2.2 (vi) (Sulphites (as SO2))	500.0
4.1.2, 4.2 and 5.2.2 (vii) (Heavy metals (as Pb))	500.0
4.1.2, 4.2 and 5.2.2 (viii) (Arsenic (as As))	500.0
4.1.2, 4.2 and 5.2.2 (x) (Mercury (as Hg))	500.0
4.1 (Description (Preliminary Examination))	500.0
Annexure A (Relative Density at 25 degC/ 25degC)	500.0

459

1121 (Stone) (1974) - Method of Test of Natural Building Stone

Method of Test of Natural Building Stone

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Compressive Strength (Dry Condition), [IS 1121 (Part 1): 1974], N/mm^2)	3000.0
5 (Compressive Strength (Wet Condition), [IS 1121 (Part 1): 1974], N/mm^2)	3000.0
5 (Tensile Strength [IS 1121 (Part 3):1974], N/mm^2)	3000.0
5 & 6 (Water Absorption [IS 1124 : 1974], %)	1000.0
5 & 6 (Porosity [IS 1124 : 1974], %)	1000.0
5 & 6 (Specific Gravity [ IS 1124 : 1974])	1000.0
13 (Mohs Hardness [ IS 13630 (Part 13) 2019])	2000.0

460

IS 1293 (2019) - Plugs and socket- outlets of rated Voltage up to and inculding 250 Volts and rated current up to and inculding 16 amperes-Specification(Fourth Revision)

Plugs and socket- outlets of rated Voltage up to and inculding 250 Volts and rated current up to and inculding 16 amperes-Specification(Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
31.1 (Type Test)	12000.0

461

IS/IEC 60898 : PART 1 (0) - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation

Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
C.1 (A) (All tests under test sequence as per table C.1 (A))	12000.0

462

IS 6603 (2001) - Stainless steel bars and flats - Specification (First Revision)

Stainless steel bars and flats - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Visual Observation)	1000.0
7 (Chemical composition, C, Si, Mn, S, Ni, Cr, Mo, Ti, Nb, P, and others.)	5000.0
9.2 (Tensile strength.)	1000.0
9.2 (0.2% proof stress.)	1000.0
9.2 (Percentage of Elongation)	1000.0
9.3 (Bend Test)	1000.0
9.4 (Rockwell/Vickers/ Brinell hardness.)	1500.0
9.5 (Impact Energy)	1500.0
12 (Width of the Flats.)	500.0
12 (Thickness of the flats)	500.0
12 (Diameters of the bar.)	1000.0

463

IS 2720 (Soil) (1987) - Method of Test for Soil.

Method of Test for Soil.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Moisture Content [IS 2720 (Part 2)], %)	500.0
4 (Specific Gravity [Is 2720 (Part 3): 1980])	1000.0
3 to 5 (Grain Size Analysis [IS 2720 (Part 4):1985], % passing)	5000.0
3 (Liquid Limit [IS 2720 (Part 5):1985], %)	1000.0
7 (Plastic Limit [IS 2720 (Part 5):1985], %)	1000.0
5 (Shrinkage [IS 2720 (Part 6):1980],)	1000.0
5 (Determination of Water Content-Dry Density (Light Compaction) [IS 2720 (7):1980], %)	5000.0
5 (Determination of Water Content-Dry Density (Heavy Compaction) [IS 2720 (8):1980], %)	5000.0
5 (CBR Test (Declared OMC) [IS 2720 (Part 16):1987], %)	4000.0
5 (CBR Test (unknown OMC) [IS 2720 (Part 16):1987], %)	9000.0
2 (Total Soluble Sulphates [Is 2720 (Part 27):1977], %)	1000.0

464

IS 2386/2720 (GSB) (1963) - GSB Aggregates/Granulated Sub Base Materials (Testing of GSB Aggregates/materials)

GSB Aggregates/Granulated Sub Base Materials (Testing of GSB Aggregates/materials)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Sieve Analysis (IS 2386 (Part 1) : 1963), % Passing)	2000.0
4 & 5 of IS 2386 (Combined Flakiness and Elongation (IS 2386 (Part 1):1963), %)	3000.0
2 (Clay Lumps (IS 2386 (Part 2):1963), %)	500.0
3 (Material Finer than 75 microns (IS 2386 (Part 2):1963), %)	500.0
4 (Coal & Lignite (IS 2386 (Part 2):1963), %)	500.0
5 of IS 2386 (Part 2) (Soft Fragments (IS 2386 (Part 2):1963), %)	500.0
6 (Organic Impurities (IS 2386 (Part 2):1963))	500.0
2 (Specific Gravity (IS 2386 (Part 3):1963))	500.0
2 (Water Absorption (IS 2386 (Part 3):1963), %)	1000.0
3 (Density (Loose) [(S 2386 (Part 3):1963], kg/m^3)	500.0
3 (Density (Compacted) [(S 2386 (Part 3):1963], kg/m^3)	500.0
3 (Void [IS 2386 (Part 3):1963],%)	500.0
4 (Aggregate Impact Value [IS 2386 (Part 4):1963], %)	1500.0
5 (Aggregate Abrasion Value [IS 2386 (Part 4):1963], %)	1500.0
6 (Soundness of Aggregates [IS 2386 (Part 5):1963], %)	2000.0
6 (Soundness of Aggregates [IS 2386 (Part 5):1963], %)	2000.0
401.2.2 of MoRTH (CBR Test at 98% dry Density (IS 2720- Part 16))	6000.0
Cl 401.2.2 (Optimum Moisture Content and Maximum Dry Density for CBR Test, (IS 2720-Part 8))	5000.0
IS 2720 (Part 5) (Atterberg limits (Liquid Limit - %, Plastic Limit - %, Plasticity Index))	3000.0
401.2.2 of MoRTH (CBR Test at 98% dry Density (IS 2720- Part 16))	6000.0

465

2386 (WMM) (1963) - Wet Mix Macadum

Wet Mix Macadum

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Sieve Analysis (as per IS 2386), % Passing)	2000.0
4 & 5 of IS 2386 (Combined Flakiness and Elongation, %)	3000.0
2 (Clay Lumps (IS 2386 (Part 3)), %)	500.0
3 (Material Finer than 75 microns (IS 2386 (P 2)), %)	500.0
4 (Coal and Lignite, (IS 2386 (P-2)), %)	500.0
5 (Soft Fragments (IS 2386 (P-5)), %)	500.0
6 (Organic Impurities, (IS 2386 (Part 2)),)	500.0
2 (Specific Gravity (IS 2386 (Part 3)).)	500.0
2 (Water Absorption (IS 2386 (Part 3)), %)	1000.0
3 (Bulk Density (Compacted), kg / m^3)	500.0
4 (Bulking (Field Method, IS 2386 (Part 3)), %)	1000.0
5 (Aggregate Abrasion Value (IS 2386 (Part 4)), %)	1500.0
4 (Aggregate Impact Value (IS 2386 (Part 4)), %)	1500.0
6 (Soundness of Aggregates, (IS 2386 (Part 5), %)	2000.0
5 (Soundness of Aggregates [IS 2386 (Part 5):1963])	2000.0
IS 2720 (Part 5) (Coefficient of Uniformity Cv and Coefficient of curvature Cc (from grain size analysis))	1000.0
IS 2720 (Part 5) (Atterberg Limit (Liquid Limit, Plastic Limit and Plasticity Index) (IS 2720 - Part 5))	3000.0
IS 2720 (Part 5) (Modified Proctor [OMC & MDD - heavy compaction] IS 2720 (Part 8))	6000.0
IS 2720 (Part 16) (Laboratory CBR value (IS 2720 - Part 16))	7000.0

466

IS 17875 (2022) - Stainless Steel Seamless Pipes and Tubes for General Services

Stainless Steel Seamless Pipes and Tubes for General Services

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical Composition)	5000.0
8.1 & 8.2 (Carbon) (Carbon (as C))	1000.0
8.1 & 8.2 (Manganese) (Manganese (as Mn))	1000.0
8.1 & 8.2 (Silicon) (Silicon (as Si))	1000.0
8.1 & 8.2 (Nickel) (Nickel (as Ni))	1000.0
8.1 & 8.2 (Chromium) (Chromium (as Cr))	1000.0
8.1 & 8.2 (Molybdenum) (Molybdenum (as Mo))	1000.0
8.1 & 8.2 (Sulphur) (Sulphur (as S))	1000.0
8.1 & 8.2 (Phosphorus) (Phosphorus (as P))	1000.0
8.1 & 8.2 (Copper) (Copper (as Cu))	500.0
8.1 & 8.2 (Nitrogen) (Nitrogen (as N))	500.0
8.1 & 8.2 (Others-Al) (Aluminium (Al))	500.0
8.1 & 8.2 (Others-Ti) (Titanium (as Ti))	500.0
8.1 & 8.2 (Others-Nb) (Niobium (as Nb))	500.0
8.1 & 8.2 (Others-Ce) (Cerium (as Ce))	500.0
8.1 & 8.2 (Others-Ta) (Tantalum (as Ta))	500.0
8.1 & 8.2 (Others-W) (Tungsten ( as W))	500.0
10.1 (Tensile Strength)	1000.0
10.1 (Yield Strength)	1000.0
10.1 (Percent Elongation)	1000.0
23 (Outside Diameter)	500.0
21 (Workmanship, Finish, and Appearance)	1000.0
12 (HARDNESS TEST FOR TUBES)	2000.0
13 (FLARING TEST (FOR TUBES ONLY))	1500.0
23 (Wall Thickness)	500.0
14 (Flattening)	1000.0
15 (Micro Structure Austenitic Grain Size)	3000.0
17 (Hydraulic Pressure Test)	5000.0
18 (Inter-Granular Corrosion Test)	10000.0
- (Charby-Impact Test)	5000.0

467

NTH/WR/MECH-CHEM/001-Metals (2022) - Custom Specifications- Mechanical and Chemical Properties of Metals & Alloys

Custom Specifications- Mechanical and Chemical Properties of Metals & Alloys

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimensions as per drawing)	1000.0
2 (Thickness)	1000.0
3 (Mass per meter)	1000.0
4 (Hardness)	1000.0
5 (Tensile Strength)	1000.0
6 (Yield Strength)	1000.0
7 (Percentage of Elongation)	1000.0
8 (Coating Thickness)	1000.0
9 (Mass of Zinc Coating)	2000.0
10 (Bend Test)	1000.0
11 (Rebend Test)	1000.0
12 (Flattening Test)	1000.0
13 (Charpy Impact Test)	3000.0
14 (Resistance to corrosion)	10000.0
15 (Abrasion Resistance)	1000.0
16 (Impact Test-Resistance to Coated Reinforcing Bar)	1000.0
17 (Carbon (as C))	500.0
18 (Phosphorus (as P))	500.0
19 (Sulphur (as S))	500.0
20 (Phosphorus (as P) plus Sulphur (as S))	1.0
21 (Silicon (as Si))	500.0
22 (Manganese (as Mn))	500.0
23 (Chromium (as Cr))	500.0
24 (Carbon Equivalent (CE))	500.0
25 (Molybdenum (as Mo))	500.0
26 (Vanadium (as V))	500.0
27 (Nickel (as Ni))	500.0
28 (Copper (as Cu))	500.0
29 (Nitrogen (as N))	500.0
30 (Titanium (as Ti))	500.0
31 (Niobium (as Nb))	500.0
32 (Aluminum (as Al))	500.0
33 (Calcium (as Ca))	500.0
34 (Boron (as B))	500.0
35 (Tungsten (as W))	500.0
36 (Cerium (as Ce))	500.0
38 (Tantalum (as Ta))	500.0
37 (Zirconium (as Zr))	500.0
39 (Chemical Compision in (%))	4000.0
3 (Weight Measurment)	1000.0
40 (Chemical Compositions in %)	5000.0
41 (Visual Observations -Designation, Marking and Finish)	1000.0
42 (Vickers Hardness in HV)	2000.0
44 (Weld Shear Strength as per the Product Specification or EN 10223-7 or relevanr IS or ISO or ASTM or any national and internation specific test method)	5000.0
46 (Mesh Size as per the product Specification or EN 10223-7 or customer Specification of relevant IS ISO/ASTM/EN/BS standard specification of any other National / International Standard Test Method)	1000.0
45 (Colour-In accordance with customer/Product Specification or IS /ISO/ASTM standard or any other Nation /International Standard Test Method)	1000.0
47 (Resistance to Deformation-In accordance with customer/Product Specification or IS /ISO/ASTM standard or any other Nation /International Standard Test Method)	2000.0
48 (Adhesion of Zinc coating as per IS 4826/IS 2629 or In accordance with customer/Product Specification or IS /ISO/ASTM standards or any other Nation /International Standard Test Method)	2000.0
49 (Dry Film Thickness as per En ISO 2808 In accordance with customer/Product Specification or IS /ISO/ASTM standards or any other Nation /International Standard Test Method)	2000.0
50 (Adhersion of Zinc Coating on wire as per IS 2629/IS 6745)	2000.0
51 (Uniformity of Coating as per IS 2633)	2500.0

468

IS 10262:2019 (with out admixture) - Concrete Mix Proportioning —Guidelines

Concrete Mix Proportioning —Guidelines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Concrete Mix Proportioning — Guidelines (without admixture))	30000.0

469

IS/IEC 60898 : PART 1 (2015) - Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Marking and other product information (SP upto 32A))	500.0
9.16 (Test of resistance to rusting (SP upto 63A))	500.0
9.14.1 (Test of resistance to heat (SP upto 63A))	1000.0
8.1.1 (General (SP upto 32A))	500.0
8.1.2 (Mechanism (SP upto 32A))	500.0
8.1.3 (Clearances and creepage distances (SP upto 32A))	500.0
9.4 (Test of reliability of screws, current-carrying parts and connections (SP upto 32A))	-
9.15 (Resistance to abnormal heat and to fire (SP upto 32A))	2000.0

470

IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST

SPECIFICATIONS FOR TRACK BALLAST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.3 (Size and Gradation (IRS-GE-I, JUNE-2016))	2000.0
2.2.3 (Water absorption (IS 2386 (Part III):1963))	1000.0
2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0
2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0

471

IS 1500 : Part 1 (2019) - Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

472

IS 940 (2003) - Specification for Portable Fire Extinguisher, Water Type (Gas Cartridge) -

Specification for Portable Fire Extinguisher, Water Type (Gas Cartridge) -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Construction of Fire Extinguisher)	1000.0
10.1 (Internal Hydraulic pressure and Ultimate strength test of pipes)	2000.0
10.3 (Discharge test )	1000.0
8 (Anti corrosive treatment)	1000.0

473

ASTM D 2863 - Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Minimum Concentration of Oxygen)	5000.0

474

IS 13620 (1993) - Fusion Bonded Epoxy Coated Reinforcing Bars -

Fusion Bonded Epoxy Coated Reinforcing Bars -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Coating Thickness)	1500.0
7.3 (Adhesion of Coating)	2000.0
A-7 (Impact Test - Resistance of Coating)	1500.0

475

Customized specification for self igniting light - Customized specification for self igniting light

Customized specification for self igniting light

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Overall length ,Light Dome length & Diameter)	1000.0
- (Lens Drop Test)	2000.0
- (Floatation test)	2000.0

476

IS 6219 (1989) - Methods of Test for General Purpose Flat Pallets for Through Transit of Goods

Methods of Test for General Purpose Flat Pallets for Through Transit of Goods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Dimensions, (Length, Width, thickness, etc.), mm)	2000.0
4.2 & 6.4 (Moisture Content of individual components [as per IS 1708 (P-1) 1986], in %)	2000.0
4.1 (Dimension of Top Planks (upto 8 Nos), in nn)	4000.0
4.1 (Dimension of Stringers (upto 3 Stringers), in mm)	1500.0
4.1 (Dimension of Bottom Planks (upto 3 Planks), in mm)	1500.0
4.1 (Dimension of Blocks (upto 10 Nos), in mm)	5000.0

477

260 (2001) - ALUMINIUM SULPHATE, NON-FERRIC

ALUMINIUM SULPHATE, NON-FERRIC

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (i) (Insoluble matter, percent by mass)	600.0
4.2 (ii) (pH ( of 5 percent solution ))	600.0
4.2 (iii) (Heavy metals (as Pb))	700.0
4.2(iv) (Iron (as Fe), percent by mass)	600.0
4.2 (vi) (Arsenic (as AS203), parts per million)	700.0
4.2 (vii) (Ammonium salts (as NH3), percent by mass)	600.0
4.2 (viii) (Aluminium (as Al203), percent by mass)	700.0
4.2 RESULTS AS PER ANNEXURE (4.2 RESULTS AS PER ANNEXURE)	5000.0

478

JAPANESE INDUSTRIAL STANDARD JIS K 5659 (2018) - JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures

JAPANESE INDUSTRIAL STANDARD JIS K 5659 -Long Durable Paints for Steel Structures

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 (Condition inside container As per 4.1.2 a of JIS K5600-1-1)	1200.0
7.5 (Low temperature stability at (-5 deg.C) As per 3.3.7 of JIS K5600-1-1)	5000.0
7.6 (Surface Drying Property as per JIS K 5600)	1200.0
7.7 (Appearance of the Film ( As per of JIS K5600-1-1 ))	1200.0
7.8 (Pot life)	1500.0
7.10 (Specular Gloss (60º) as per JIS K5600-4-7)	1200.0
7.11 (Overcoatability)	1200.0
7.12 (Flexibility 10 mm dia mandrel of type I tester as per JIS 5600-5-1)	1200.0
7.13 (Falling weight Resistance 300 gram weight& drop height 500 mm (As per JIS K 5600-5-3))	1500.0
7.14 (Interlayer adhesion-I(between undercoat and intermediate coat))	2000.0
7.15 (Interlayer adhesion-II(between Intermediate coat & top coat))	2000.0
7.16 (Alkali Resistance (dilute Calcium Hydroxide),Immersing method, for 168 Hours at 23 ±1 Deg c)	1500.0
7.17 (Acid Resistance (dilute Sulfuric Acid 5gram per litre),Immersing method, for 168 Hours at 23 ±1 Deg c)	1500.0
7.19 (Non Volatile Matter content % As per JIS K 5601-1-2)	1200.0
7.20 (Accelerated weathering Resistance- Xenon arc Exposure period 2000 hours As per of JIS K5600-7-7)	120000.0
7.20 b (Accelerated weathering Resistance by Xenon arc Exposure period 500 hours) after 24 Months Natural Weathering Resistance test (As per of JIS K5600-7-7))	15000.0
7.21 (Natural Weathering Resistance (for 24 Months) as per JIS K 5600-7-6)	20000.0
JIS K 5659 (Please refer annexure for test results)	1.0
7.18 (Humidity and Cool-Heat Cycling Resistance Test Condition :Immersion in water at 23 Deg C for 18 hours followed by cooling at -20 deg C for 03 Hours ,Heat at 50 deg C for 03 hours (10 Cycles))	10000.0
JIS K 5659 (Scratch Hardness test (IS 101 (Part 5/Sec 2)))	1200.0
JIS K 5659 (Adhesion, Cross Cut)	1500.0
JIS K 5659 (Mix density, (IS 101 (Part 1/Sec 7))	1200.0
JIS K 5659 (Dry Film Thickness (DFT) (IS 101 (Part 3/Sec 2))	1200.0
7.9 (Contrast ratio %)	2000.0

479

13209 (2024) - Indelible Ink-Specification

Indelible Ink-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Description)	1000.0
3.3 (Colour)	1000.0
3.4 (pH)	1000.0
3.5 (Total solids)	1000.0
3.6 (Development)	1000.0
3.7.1 (Performance- Resistance to Bleaching)	1000.0
3.7.2 (Performance- Resistance to organic solvents)	1000.0

480

IRS : TC 30-05 - UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1 (The diameter of the conductor shall be measured on the finished sample. The measurement shall be made atleast at three different points with two readings at 90 degree along the length of the sample.)	1.0
5.5.2 (A sample of wire taken from finished cable, when tested shall have elongation at fracture of not less than 23 d for diameter O.9 mm)	1.0
5.7.1 (Determination of the thickness of insulation of round cores and sheath shall be made on a representative sample of the cable approximately one meter long taken from the drum length of the cable.)	1.0
5.7.2 (The measurement in case of conductor insulation, inner, intermediate and outer sheath shall be made at three different points at interval of not less than 75 mm along the length of the sample and at each point the minimum thickness or the'insulation inner, intermediate & outer sheath shall be measured along with two more readings made at equidistant points around the periphery.)	1.0
3.8.3 (The number and the size of the aluminium wires/strips used for screening shall be such as to comply with the requirements of Cl 5.9.9)	200.0
3.8.4 (The layer of the aluminium wires/ strips used for screening shall be compact and the length of the lay shall be high.)	200.0
3.8.5 (The minimum tensile strength of Aluminium screen shall be 15 Kg/ Sqmm)	200.0
3.8.6 (The innermost layer of the screening shall have left hand lay and the sucessive layer shall be laid with opposite lay.)	200.0
3.8.7 (Drift expansion test to IS 2335-1985 shall be carried out on a test piece of length twice the external dia of the tube by conical mandrel having height three times its base diameter.)	200.0
3.8.8 (Flattening test to IS. 2328- 1983 shall be carried out on a test piece of not less than 50 mm long cut from each selected tube.)	200.0
3.9.1 (The aluminium screen shall be wrapped with a single layer of woven tape impregnated with Barium Chromate with minimum 20% overlap.)	500.0
3.9.2 (The tape used shall be fine woven cloth tape of about 0.15 mm thickness.)	200.0
3.10.7 (The test shall be conducted on PVC intermediate sheath in accprdance with BS 6169 or any approved method.)	1000.0
5.8.1.1 (The test shall be conducted in accordance with the procedure laid down in IS 10810 (Part-7))	500.0
5.8.1.2 (The values after ageing for tensile strength and % elongation shall not be less than given in Cl 5.8.1)	500.0
5.8.1.3 (The values of all the four samples in case of each sheath shall be averaged and then % variation calculated.)	1.0
5.8.1.4 (For acceptance test, the sample shall be kept in air oven at 130 deg C for 5 hours)	1000.0
5.8.1.5 (Tensile strength and Elongation at break for polythene sheath and insulation shall be carried out before ageing only)	500.0
5.8.2.1 (No crack should occur)	500.0
5.8.2.2 (For PVC intermediate and outer sheath shrinkage shall not exceed 2% of original length and temperature shall be 150 Deg C for 15 min.)	1000.0
5.8.2.3 (For PE insulation temp shall be 100 Deg C for a period of 24 hrs and average shrinkage of 4 samples of length 150 mm of each colour of insulation shall not exceed 6.35 mm.)	1000.0
5.8.2.4 (A sample shall be cut from the cable sheath, 50 mm long measured along the axis. 12 mm wide and the same thickness as the cable sheath)	1000.0
5.8.11 (The test to be conducted in accordance with the procedure laid down in IS 10810 (Part 60))	500.0
5.8.22 (Visual Inspection and Marking)	100.0
5.9.1 (HV Test to be carried out)	2000.0
5.9.2 (Insulation resistance Test)	1000.0
5.9.3 (Conductor Resistance Test)	1.0
5.8.2.3 (Shrinkage Test of PE Insulation)	1000.0