| 541 |
IS 516 : Part 5 : Sec 1 (2018) - Hardened Concrete -Methods of Test Part 5 Non-destructive Testing of Concrete Section 1 Ultrasonic Pulse Velocity Testing ( First Revision ) |
Hardened Concrete -Methods of Test Part 5 Non-destructive Testing of Concrete Section 1 Ultrasonic Pulse Velocity Testing ( First Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2 (Ultrasonic test (field) IS 516 (Part5)/Sec1:2021) |
2000.0 |
|
|
| 542 |
IS 2062 (2011) - Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15 (Dimensions) |
1000.0 |
|
| 12 (Impact Test (For Specified Quality Grade)) |
5000.0 |
|
| 11 (Bend Test - IS 1599: 2019.) |
1500.0 |
|
| 10 (% Elongation - IS 1608 (Part 1): 2022.) |
1000.0 |
|
| 10 (Yield Stress - - IS 1608 (Part 1): 2022.) |
1000.0 |
|
| 10 (Tensile Strength - IS 1608 (Part 1): 2022) |
1000.0 |
|
| 7 (Freedom from Defects) |
1000.0 |
|
| 8.2 (Carbon) |
500.0 |
|
| 8.2 (Manganese) |
500.0 |
|
| 8.2 (Sulphur) |
500.0 |
|
| 8.2 (Phosphorus) |
500.0 |
|
| 8.2 (Silicon) |
500.0 |
|
| 8 (Chemical Analysis) |
2500.0 |
|
| 8 (Chemical Analysis with micro-alloys) |
5000.0 |
|
| 8.2 (Carbon Equivalent, %) |
500.0 |
|
|
| 543 |
IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision) |
Mild steel wire for general engineering purposes (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.1 (Tensile Strength) |
3000.0 |
|
| 9.2 (Wrapping Test) |
1000.0 |
|
| 9.3 (Bend Test) |
1000.0 |
|
| 6 (Chemical Composition (Carbon)) |
625.0 |
|
| 6 (Chemical Composition (Manganese)) |
625.0 |
|
| 6 (Chemical Composition (Sulphur)) |
625.0 |
|
| 6 (Chemical Composition (Phosphorus)) |
625.0 |
|
| 6 (Chemical composition) |
2500.0 |
|
| 0 (Adhesion Test) |
1000.0 |
|
| 0 (Mass of Zinc Coating) |
2000.0 |
|
| 0 (Uniformity of Coating) |
1000.0 |
|
| 0 (Coating Thickness) |
2000.0 |
|
| 7.1 (Wire Diameter) |
1000.0 |
|
| 0 (Weight) |
1000.0 |
|
| 0 (Tensile Strength of Wire) |
1000.0 |
|
| 13 (Freedom From Defects) |
1000.0 |
|
|
| 544 |
IS 16014 (2018) - Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Tensile Strength of Mesh Wire(Steel)) |
2000.0 |
|
| 7.1 (Mass of Zinc/Zinc Alloy Coating of Mesh Wire) |
2000.0 |
|
| 7.2 (Specific Gravity of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 7.2 (Tensile Strength of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 6.1 (Elongation of Mesh Wire) |
1000.0 |
|
| 7.2 (Hardness of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 8 (Diameter of Mesh Wire without Polymer Coating) |
1000.0 |
|
| 8 (Thickness of Polymer Coating of Mesh Wire) |
1000.0 |
|
| 8 (Mesh Size) |
1000.0 |
|
| 8 (Diameter of Edge/Selvedge Wire without Polymer Coating) |
1000.0 |
|
| 8 (Diameter of Lacing Wire without Polymer Coating) |
500.0 |
|
| 8 (Diameter of Mesh Wire with Polymer Coating) |
500.0 |
|
| 8 (Size of Gabion Box/ Revet Mattress/ Reinforced Soil Structure (L x W x H)) |
1000.0 |
|
| 8 (Size of Sack Gabion (L x D)) |
1000.0 |
|
| 8 (Size of Rockfall Netting (L x W)) |
1000.0 |
|
| 6.1 (Tensile Strength of Edge/Selvedge Wire (steel)) |
2000.0 |
|
| 6.1 (Tensile Strength of Lacing Wire(steel)) |
2000.0 |
|
| 6.1 (Elongation of Edge/Selvedge Wire) |
1000.0 |
|
| 6.1 (Elongation of Lacing Wire) |
1000.0 |
|
|
| 545 |
IS 1079 (2017) - Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Tensile Strength for Designation Ordinary, Commercial and General purpose.) |
2000.0 |
|
|
| 546 |
IS 1341 (2018) - Steel Butt Hinges - Specification (Sixth Revision) |
Steel Butt Hinges - Specification (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Dimensions) |
1000.0 |
|
| 4 (Chemical Analysis) |
5000.0 |
|
|
| 547 |
IS 277 (2018) - Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) |
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15 (Dimensions of Corrugated sheet) |
1000.0 |
|
| 8.1 (Yield Strength, MPa) |
1000.0 |
|
| 8.1 (Tensile strength, MPa) |
1000.0 |
|
| 8.1 (Percentage Elongation, %) |
1000.0 |
|
| 8.2 (Bend Test) |
1000.0 |
|
| 12 (Freedom from defects) |
1000.0 |
|
| 5.1 (Carbon) |
500.0 |
|
| 5.1 (Manganese) |
500.0 |
|
| 5.1 (Silicon) |
500.0 |
|
| 5.1 (Sulphur) |
500.0 |
|
| 5.1 (Phosphorus) |
500.0 |
|
| 5.1 (Aluminium) |
500.0 |
|
| 5.1 (Niobium) |
500.0 |
|
| 5.1 (Vanadim) |
500.0 |
|
| 5.1 (Titanium) |
500.0 |
|
| 5.1 (Boron) |
500.0 |
|
| 5.1 (Nb+V+Ti+B) |
- |
|
| 8.1 (Uniformity of Zn coating) |
1000.0 |
|
|
| 548 |
IS 513 : Part 2 (2016) - Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Yield stress) |
1000.0 |
|
|
| 549 |
IS 1599 (2023) - Metallic Materials - Bend Test |
Metallic Materials - Bend Test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 1599 (Bend test) |
1500.0 |
|
|
| 550 |
IS 1501 : Part 1 (2020) - Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision ) |
Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Hardness) |
2000.0 |
|
|
| 551 |
IS 1586 : Part 1 (2018) - Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision) |
Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Hardness) |
2000.0 |
|
|
| 552 |
IS 9845 (1998) - Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) |
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Overall migration in simulant A) |
3000.0 |
|
| 1 (Overall migration in simulant 'B') |
3000.0 |
|
| 1 (Overall migration in simulant 'C1') |
3000.0 |
|
| 1 (Overall migration in simulant 'C2') |
3000.0 |
|
| 1 (Overall migration in simulant 'D') |
3000.0 |
|
|
| 553 |
IS 2095 : Part 1 (2011) - Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
Gypsum Plaster Boards - Part 1 Plain Gypsum Plaster Boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Finish-IS 2095 (1):2011) |
500.0 |
|
| 8.3 (Mass of Plaster-IS: 2542 (Part 2/Sec 4)) |
1000.0 |
|
| 7.2, 8.2 (Taper Profile-IS 2095 (1):2011) |
2000.0 |
|
| 7.3, Table3, 8.1 (Transverse Strength-IS: 2542 (Part 2/Sec 4)) |
4000.0 |
|
| 7.1, Table1 /Table2, 8.1 (Dimensions-IS: 2542 (Part 2/Sec 1)) |
500.0 |
|
|
| 554 |
IS 2095 : Part 3 (2018) - Gypsum Plaster Boards — Specification Part 3 Reinforced Gypsum Plaster Boards, Tiles, Cornices and Mouldings ( Third Revision ) |
Gypsum Plaster Boards — Specification Part 3 Reinforced Gypsum Plaster Boards, Tiles, Cornices and Mouldings ( Third Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.7 (Water Absorption-IS: 2542 (Part 2/Sec 6)) |
1000.0 |
|
|
| 555 |
IS 2095 : Part 2 (2001) - Gypsum plaster boards - specification: Part 2 coated/laminated gypsum plaster boards |
Gypsum plaster boards - specification: Part 2 coated/laminated gypsum plaster boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 to 6.5, Table1 (Dimensions & Tolerances, Shape, Mass-IS 2095 (2):2001) |
2000.0 |
|
|
| 556 |
IS 3622 (1977) - Sandstone (slabs And Tiles) |
Sandstone (slabs And Tiles) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Dimensions) |
500.0 |
|
| 4.1 (Resistanceto wear) |
2000.0 |
|
| 4.1 (Transverse Strength) |
2000.0 |
|
| 4.1 (Water Absorption) |
1000.0 |
|
|
| 557 |
IS 2720 : Part 4 (1985) - Methods of test for soils: Part 4 grain size analysis (Second Revision) |
Methods of test for soils: Part 4 grain size analysis (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Particle size distribution) |
5000.0 |
|
|
| 558 |
IS 2720 : Part 16 (1987) - Methods of test for soils: Part 16 laboratory determination of cbr (Second Revision) |
Methods of test for soils: Part 16 laboratory determination of cbr (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (CBR with declared OMC on disturbed sample) |
4000.0 |
|
|
| 559 |
IS 4457 (2007) - Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision) |
Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Water Absorption) |
1000.0 |
|
| 4 (Acid resistance) |
1500.0 |
|
| 4 (Warpage) |
1000.0 |
|
| 4 (Breaking Strength) |
2000.0 |
|
| 4 (Modulus of rupture) |
2000.0 |
|
| 4 (Water Absorption) |
1000.0 |
|
| 3 (Dimension-Length) |
1000.0 |
|
| 2 ( Surface Quality) |
500.0 |
|
|
| 560 |
IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision ) |
Concrete Mix Proportioning — Guidelines ( Second Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Concrete Mix Design (IS 10262:2019)) |
35000.0 |
|
|
| 561 |
IS 9103 (1999) - Specification for Concrete Admixtures - |
Specification for Concrete Admixtures - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.2.1 (Comparative Compressive strength for three duration of concrete) |
10000.0 |
|
| 9 (Dry Material content) |
1000.0 |
|
| 9 (Ash content) |
1000.0 |
|
| 9 (Relative density) |
1000.0 |
|
| 9 (Chloride ion content) |
1000.0 |
|
| 7.2.1 (Slump of Control Concrete Mix at 15 Minutes) |
2000.0 |
|
| 7.2.4 (Bleeding concrete additive) |
2000.0 |
|
| 8.2.3 (Length change concrete additive) |
2000.0 |
|
| 8.2.2 (Comparative Flexural Compressive strength for one duration of concrete additive) |
5000.0 |
|
| 8.2.2 (Flexural strength for one duration of concrete additive) |
5000.0 |
|
| 7.2.3 (Setting time of concrete additive allowable Deviation from control sample) |
2000.0 |
|
| 9 (Colour (as per IS 9103)) |
1000.0 |
|
| 9 (pH) |
1000.0 |
|
| 8.2.1 (Comparative Compressive strength for three duration of concrete) |
10000.0 |
|
| 8.2.1 (iv) (Comparative Compressive strength of concrete after 6 months) |
7000.0 |
|
| 8.2.1 (iv) (Comparative Compressive strength of concrete after 1 year) |
9000.0 |
|
| 8.2.3 (iv) (Comparative length change of concrete after 6 months) |
3000.0 |
|
| 8.2.3 (iv) (Comparative length change of concrete after 1 year) |
5000.0 |
|
|
| 562 |
IS 3316 (1974) - Structural Granite |
Structural Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Water Absorption) |
1000.0 |
|
| 3.2 (Specific Gravity) |
1000.0 |
|
| 3.1 (Compressive Strength) |
2000.0 |
|
|
| 563 |
IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite |
Polished Building Stones: Part 1 Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Dimensions) |
500.0 |
|
| 5 (Moisture content) |
500.0 |
|
| 5 (Dry density ) |
1000.0 |
|
| 5 (Specific gravity) |
1000.0 |
|
| 5 (Porosity) |
1000.0 |
|
| 5 (Compressive strength) |
2000.0 |
|
| 5 (Tensile strength) |
2000.0 |
|
| 5 (Hardness) |
2000.0 |
|
| 5 (Resistance to wear) |
4000.0 |
|
| 5 (Water absorption) |
1000.0 |
|
| 4 (Dimensions) |
500.0 |
|
|
| 564 |
IS 14587 (2017) - Cement Bonded Particle Boards |
Cement Bonded Particle Boards |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 565 |
IS 1328 (1996) - Veneered Decorative Plywood -Specification |
Veneered Decorative Plywood -Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.1.1 (Moisture Content IS 1734 (Part 1):1983) |
1000.0 |
|
|
| 566 |
IS 1003 : Part 1 (2003) - Timber Panelled and Glazed Shutters-Door shutter |
Timber Panelled and Glazed Shutters-Door shutter |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Location of fittings and accessories -IS 1003 (Part 1) : 2003) |
1000.0 |
|
|
| 567 |
ASTM C882 (2005) - Standard Test Method for the bond strength of epoxy-resin-base bonding systems for used with concrete by slant shear |
Standard Test Method for the bond strength of epoxy-resin-base bonding systems for used with concrete by slant shear |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Slant Shear strength) |
4000.0 |
|
|
| 568 |
ASTM C580 (2002) - Standard Test Method for Compressive Strength of Chemical-Resistant Mortar, Grouts, and Surfacing, Polymer concretes |
Standard Test Method for Compressive Strength of Chemical-Resistant Mortar, Grouts, and Surfacing, Polymer concretes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Flexural strength) |
4000.0 |
|
|
| 569 |
ASTM C579 (2001) - Standard Test Method for Compressive Strength of Chemical-Resistant Mortar, Grouts, and Surfacing, Polymer concretes |
Standard Test Method for Compressive Strength of Chemical-Resistant Mortar, Grouts, and Surfacing, Polymer concretes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (compressive strength) |
4000.0 |
|
|
| 570 |
ASTM C 307 (2003) - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Surfacing |
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Surfacing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Tensile Strength) |
4000.0 |
|
|
