| 91 |
17908 (2023) - Fibre Cement Sheet - Lightweight Concrete Sandwich Panels |
Fibre Cement Sheet - Lightweight Concrete Sandwich Panels |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Overall Length, in mm) |
1000.0 |
|
| 6.2 (Overall Width, in mm) |
1000.0 |
|
| 6.2 (Thickness, in mm) |
1000.0 |
|
| 6.2 (Indentation Depth, in mm) |
500.0 |
|
| 6.2.1.1 (Straightness of Edge, in mm/m) |
1000.0 |
|
| 6.2.1.2 (Squareness of edge, in mm/m) |
1000.0 |
|
| 6.3 (Density, in kg/m^3) |
1000.0 |
|
| 6.4.1 (Bending Strength (Three Point Loading), N/mm^2)) |
4000.0 |
|
| 6.4.2 (Bending Strength (Uniformly Distributed Load), in N/m^2) |
4000.0 |
|
| 6.5 (i) (Impact Test (Small Hard Body impact - Surface damage),) |
1500.0 |
|
| 6.5 (i) (Impact Test (Small hard body impact - Perforations)) |
1500.0 |
|
| 6.5 (ii) (Impact Test (Large soft body impact), deformation in mm) |
1500.0 |
|
| 6.6.2 (Tensile Strength, in N/mm^2) |
2000.0 |
|
| 6.6.3 (Screw Withdrawal Strength, in kN) |
1500.0 |
|
|
| 92 |
303 (2024) - Plywood for General Purpose |
Plywood for General Purpose |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.1 (Length, in mm) |
500.0 |
|
| 8.1 (Width, in mm) |
500.0 |
|
| 8.2 (Thickness, in mm) |
500.0 |
|
| 8.3 (Squareness, in mm/m) |
500.0 |
|
| 8.3 (Edge Straightness, in mm/m) |
500.0 |
|
| 5 (Classification by Appearance) |
1000.0 |
|
| 9 (Workmanship and finish,) |
1000.0 |
|
| 11.3.1 (a) (Glue Adhesion - Water Resistance Test) |
2000.0 |
|
| 11.3.1 (b) (Glue Adhesion Test - Water Resistance Test - BWR Grade) |
2000.0 |
|
| 11.3.1 cb) (Glue Adhesion Test - Water Resistance Test - BWP Grade) |
2000.0 |
|
| 11.3.2 (Mycological Test) |
1500.0 |
|
| 11.4 (Moisture Content, in %) |
1000.0 |
|
| 11.5 (Static Bending Strength (Modulus of Rupture -Along), in N/mm^2) |
1000.0 |
|
| 11.5 (Static Bending Strength (Modulus of Rupture - Across), in N/mm^2) |
1000.0 |
|
| 11.5 (Static Bending Strength (Modulus of Elasticity-Along), in N/mm^2) |
1000.0 |
|
| 11.5 (Static Bending Strength (Modulus of Elasticity- Across), in N/mm^2) |
1000.0 |
|
|
| 93 |
CUS/SR/MECH-55 (2024) - Mechanical Properties of Metal |
Mechanical Properties of Metal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Dimensions, mm) |
2000.0 |
|
| 2.0 (Brinell Hardness, HBW) |
2000.0 |
|
| 5.0 (Powder Coating Thickness, micron) |
2000.0 |
|
| 6.0 (Tensile strength, N/mm²) |
1000.0 |
|
| 7.0 (Yield strength, N/mm²) |
1000.0 |
|
| 8.0 (Percentage Elongation, %) |
1000.0 |
|
| 9.0 (Weight, kg) |
1000.0 |
|
|
| 94 |
CUS/SR/MECH-8 - Composite Sandwich Shutter |
Composite Sandwich Shutter |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Deflection) |
3000.0 |
|
| 2.0 (Breaking load) |
3000.0 |
|
|
| 95 |
CUS/SR/MECH-14 - Trek Bottle |
Trek Bottle |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Height) |
1000.0 |
|
| 2.0 (Weight) |
1000.0 |
|
| 3.0 (Capacity) |
1000.0 |
|
| 4.0 (Hot water test) |
3000.0 |
|
| 5.0 (Cold water test) |
3000.0 |
|
| 6.0 (Chemical composition, % by mass) |
6000.0 |
|
|
| 96 |
IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2.5 (Relaxation Losses) |
50000.0 |
|
| 6.2.4 (Relaxation Losses) |
50000.0 |
|
| 6.1 (Nominal Mass) |
1500.0 |
|
| 6.1 (Nominal Area ) |
1000.0 |
|
| 6.1 (Nominal Diameter ) |
1000.0 |
|
| 6.1 (Nominal Mass of strand - IS 14268: 2022.) |
1500.0 |
|
| 6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.) |
1000.0 |
|
| 6.1 (Nominal Diameter of strand- IS 14268: 2022.) |
1000.0 |
|
| 6.2.3 (Elongation) |
1000.0 |
|
| 6.2.2 (0.2% Proof Load) |
1000.0 |
|
| 6.2.2 (Breaking Strength) |
3000.0 |
|
| 6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
1000.0 |
|
| 6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
3000.0 |
|
| 6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.) |
1000.0 |
|
| 4.2 (Length of lay of 9.5 mm strand) |
1000.0 |
|
| 4.2 (Length of lay for dia 15.2mm) |
500.0 |
|
| 4.5 (Visual observation) |
1000.0 |
|
| 4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.) |
1000.0 |
|
| Table 2 (Cl 6.1, Cl 4.2) (Dimension and Mass) |
1000.0 |
|
| 4.5 (Workmanship and Finish) |
1000.0 |
|
| 4.1.2 (Chemical composition (Annexure for NABL parameters)) |
3500.0 |
|
| 4 (Chemical composition (Annexure for non-NABL parameters)) |
3000.0 |
|
| Note 1 (Modulus of Elasticity, N/mm2) |
1000.0 |
|
| 6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.) |
1000.0 |
|
|
| 97 |
CUS/SR/MECH-27 (2022) - Stainless Steel Kadai |
Stainless Steel Kadai |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Thickness) |
1000.0 |
|
| 2.0 (Inside diameter) |
1000.0 |
|
|
| 98 |
CUS/SR/MECH-11 - Insulated Tiffin Carrier |
Insulated Tiffin Carrier |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Weight) |
1000.0 |
|
| 2.0 (Capacity) |
1000.0 |
|
|
| 99 |
NTH(WR)/MECH/CUSTOM/022-CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa (2024) - CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa |
CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Identification and Marking) |
- |
|
| 2 (Product Dimension, in mm as per TDS / relevant Product IS specification) |
1000.0 |
|
| 3 (Weight in g as per TDS / relevant Product IS specification) |
1000.0 |
|
| 4 (Capacity in L, as per TDS / relevant Product IS Specification) |
500.0 |
|
| 5 (Workmanship and Finish- Visual Examination
as per IS 1660 / relevant product specification of National or International standard Test method specified) |
500.0 |
|
| 6 (Non-Stick Coating thickness, in µm
as per IS 9730 / IS 6012 or any other relevant International or National standard test method specified) |
2000.0 |
|
| 7 (Non-Stick Quality test, (Coating shall permit the test foods to be removed intact & coating surfaces to be wiped clean.)
as per IS 1660 or relevant product specification or any other International / National Standard test method) |
1000.0 |
|
| 8 (Finish of the coating - Visual Defects Test as per IS 1660 or any other International/national Standard or relevant product specification.
Non-stick coatings shall be free from defects visible to naked eye.) |
1000.0 |
|
| 9 (Salt-Water Corrosion Test, As per IS 9730
No defects additional to those initially present shall be observed in the coating.) |
2000.0 |
|
| 10 (Adhesion Test – Cross hatch Test, As per IS 9730
No complete squares and not more than 5 percent of the total cross hatched area of the coating shall be lifted from the base and wall of the utensil.) |
2000.0 |
|
| 11 (Adhesion Test – Peel Test,As per IS 9730
Peeled away coating length shall not be greater than 2 mm.) |
2000.0 |
|
| 12 (Abrasion Resistance, As per IS 1660:2009
When the coating surface is rubbed two or three times with emery paper or emery cloth with emery conforming to grit number 180 of IS 715 ( Part 1) using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface.) |
500.0 |
|
| 13 (Hardness Test as per IS 1660:2009) |
500.0 |
|
| 14 (Test on Handle- Visual Examination as per IS 1660
Handle shall be sufficiently strong to support a mass in the utensil equivalent to three times the mass of the water capacity of the utensil in the position of normal use without visible permanent deformation of the handle or utensil) |
500.0 |
|
| 15 (Body Assembly-Visual as per TDS / IS 1660
Stay cool handle fitted to body) |
1000.0 |
|
| 16 (Coating Thickness by Microscopic Method as per IS 5523) |
2500.0 |
|
| 17 (Material of Utensil as per TDS declaration /IS 21 / IS 1660 / any other relevant product specification specified National or International Standard Test Method) |
3500.0 |
|
| 18 (Material of Lid as per TDS Declaration / IS 1660 refered product specification and method / any other relevant product specification specified in the international or National standard) |
3500.0 |
|
|
| 100 |
IS 1660 (2009) - Wrought aluminium utensils - Specification (First Revision) |
Wrought aluminium utensils - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Dimension, mm) |
1000.0 |
|
| 8 (Workmanship & finish) |
1000.0 |
|
| 7.2 (Test on Handle) |
500.0 |
|
| 8.4.1.2 (Finish of the coating) |
500.0 |
|
| 8.4.2 (Coating thickness test) |
2500.0 |
|
| 8.4.3 (Abrasion resistance test) |
500.0 |
|
| 8.4.5 (Hardness test) |
500.0 |
|
| 4 (Materials of Lid) |
3500.0 |
|
| 4 (Materials of utensil) |
3500.0 |
|
| TDS-1 (Weight) |
500.0 |
|
| 8.5 (Non-Stick Unreinforced Plastics Coatings on Domestic Cooking Utensils) |
8000.0 |
|
| 8.5 (Coating thickness test as per IS 9730) |
2000.0 |
|
| TDS-2 (Capacity , ml) |
500.0 |
|
|
| 101 |
IS 2074 : 2023 (2023) - READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC
CHROME PRIMING ― SPECIFICATION |
READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC
CHROME PRIMING ― SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Composition) |
300.0 |
|
| 5.3 (Compatibility with Thinner) |
100.0 |
|
| 5.4 (Freedom from Objectionable Impurities) |
100.0 |
|
| 5.5 (Lead Restriction) |
100.0 |
|
| Table 1 (Consistency (Annexure C)) |
100.0 |
|
| Table 1 (Viscosity by ford cup No. 4 at 27±2°C ((Part l/Sec 5)) |
500.0 |
|
| Table 1 (Mass, in kg/10 l, (Part l/Sec 7)) |
500.0 |
|
| Table 1 (Drying time, h, Max: a) Surface dry ((Part 3/Sec 1)) |
500.0 |
|
| Table 1 (Drying time, h, Max: a) Hard dry ((Part 3/Sec 1)) |
500.0 |
|
| Table 1 (Finish, (IS 101 Part 3/Sec 4)) |
500.0 |
|
| Table 1 (Gloss 60°, Max (IS 101 Part 4/ sec 4)) |
500.0 |
|
| Table 1 (Fineness of grind, microns, Max (IS 101 Part 3/Sec 5)) |
500.0 |
|
| Table 1 (Colour (IS 101 (Part 4/Sec 2))) |
500.0 |
|
| Table 1 (Flexibility and adhesion:
a) Bend test with 6.25mm dia mandrel and in type 1 apparatus) (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Table 1 (Flexibility and adhesion: b) Scratch hardness ( Load 1 000g ) (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Table 1 (Flash point (IS 101 (Part l/Sec 6))) |
500.0 |
|
| Table 1 (Volume solids, (IS 101 (Part 8/Sec 6))) |
1.0 |
|
| Table 1 (Resistance to humidity under conditions of condensation
a) Resistance to humidity, (IS 101 (Part 6/Sec 1))) |
499.0 |
|
| Table 1 (b) Resistance to seawater (applicable for marine paints only), Annexure D) |
1000.0 |
|
| Table 1 (Accelerated storage stability test, Annexure F) |
500.0 |
|
| Table 1 (Keeping properties for 12 Months, (IS 101 (Part 6/Sec 2))) |
5000.0 |
|
| Table 2 (Consistency, Annexure C of IS 2074) |
300.0 |
|
| Table 2 (Hard dry, h, Max (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Table 2 (Non- volatile vehicle, (IS 101 (Part 8/Sec 2))) |
500.0 |
|
| Table 1 (Wet opacity, (IS 101 (Part 4/ Sec 1))) |
500.0 |
|
| Table 1 (c) Resistance to salt spray, (Annexure E of 2074), (IS 101 (Part 6/Sec 1))) |
500.0 |
|
|
| 102 |
Customized Specification for ILC of Paper - Customized Specification for ILC of Paper |
Customized Specification for ILC of Paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Ash at 900 deg. C as per IS 1060(Part 5/Sec 3)) |
- |
|
| - (ISO Brightness as per IS 1060(part 4/Sec 13)) |
- |
|
| - (Opacity as per IS/ISO 2471) |
- |
|
|
| 103 |
IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IBR 1950 (Welder qualification) |
4500.0 |
|
| IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Horizontally Fixed) |
3500.0 |
|
| IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Horizontally Fixed) |
4500.0 |
|
| NTH Additional Charges for Testing (Scientist Charges) |
5000.0 |
|
| IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Vertically Fixed) |
4500.0 |
|
| IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Vertically Fixed) |
3500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Plate (SMAW/FCAW) (Plate and Electrodes not supplied by NTH)) |
3000.0 |
|
| Chapter XIII (Certification of welder on Pipe & Branch Pipe by TIG/GTAW) |
9000.0 |
|
| Chapter XIII (Certification of welder per position of welding on Pipe/Tube by MMAW) |
4500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Pipe by TIG/GTAW) |
4500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Tube by TIG/GTAW) |
4500.0 |
|
| Chapter XIII (Certification of welder per position of welding on Plate (SMAW+TIG / GTAW)(Plate and Electrodes not supplied by NTH)) |
3500.0 |
|
|
| 104 |
Customized Specification for Nylon material - Customized Specification for Nylon material |
Customized Specification for Nylon material |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Specific Gravity as per ASTM D 792) |
1000.0 |
|
| - (Hardness as per ASTM D 2240) |
1000.0 |
|
| - (Tensile Strength at yield as per ASTM D 638) |
2000.0 |
|
| - (Flexural Modulus as per ASTM D 790) |
2000.0 |
|
| - (Water absorption as per ASTM D 570) |
2000.0 |
|
|
| 105 |
Customized specification for ASTM D 638 - Customized specification for ASTM D 638 |
Customized specification for ASTM D 638 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength and Elongation as per ASTM D 638) |
3000.0 |
|
|
| 106 |
Custom specifications for cosmetic products (2024) - Custom specifications for cosmetic products |
Custom specifications for cosmetic products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Custom specifications for cosmetic products (Please refer to the annexure for the result) |
5000.0 |
|
|
| 107 |
Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037 - Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037 |
Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of the item) |
500.0 |
|
| - (Outer dia.from top(approx)) |
500.0 |
|
| - (Height(approx)) |
500.0 |
|
| - (Weight with tolerance) |
500.0 |
|
| - (Capacity with tolerance) |
500.0 |
|
| - (Colour) |
500.0 |
|
| - (Active ingredients (HDPE)) |
2000.0 |
|
| - (Parts and their specifications) |
500.0 |
|
| - (Identification Marks /Marking) |
500.0 |
|
|
| 108 |
Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455 - Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455 |
Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of Item) |
500.0 |
|
| - (Dimensions with tolerances) |
500.0 |
|
| - (Weight with tolerance) |
500.0 |
|
| - (Active ingredients(PP/HD Powder)) |
2000.0 |
|
| - (Identification Marks/marking) |
500.0 |
|
|
| 109 |
None - Customer specification for General chemical and Metal oil fuel -NTH WR |
Customer specification for General chemical and Metal oil fuel -NTH WR |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Volatile Organic Compounds) |
4000.0 |
|
|
| 110 |
NTH(WR)/MECH/CUSTOM/021 (2024) - Fence Items and Accessories - Barbed Wire |
Fence Items and Accessories - Barbed Wire |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Line Wire Diameter as per IS 278) |
1000.0 |
|
| 2 (Point/Barb Wire Diameter as per IS 278) |
1000.0 |
|
| 3 (Designation & Type as per IS 278) |
1000.0 |
|
| 4 (Barbing Pitch as per IS 278) |
1000.0 |
|
| 5 (Barb Length as per IS 278) |
1000.0 |
|
| 6 (Tensile Strength of Barbed Wire as per IS 278) |
2000.0 |
|
| 7 (Tensile Strength of Line Wire as per IS 278) |
2000.0 |
|
| 8 (Mass of Zinc Coating (GSM) as per IS 4826) |
1500.0 |
|
|
| 111 |
NTH(WR)/MECH/CUSTOM/020 (2024) - Fence Items and Accessories - Concerina Coil |
Fence Items and Accessories - Concerina Coil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Dimensions of Blade
Tear Blade (TBBT):
Blade Length :
Width of Blade:
Distance between Blades (C-C):) |
1000.0 |
|
| 2 (Coil Diameter) |
1000.0 |
|
| 3 (Number of Loops) |
1000.0 |
|
| 4 (Dimension of G.I Wire in mm) |
1000.0 |
|
| 5 (Tensile Strength of GI Core Wire, as per relevant IS product specification or Test Method IS 1608 Part-1) |
3000.0 |
|
| 6 (Mass of Coating as per IS 4826 or IS 12753 or any other method or Product Specification of National /International standard specified by the customer.) |
1500.0 |
|
| 7 (Weight/Meter of Coil in Kg/m) |
1000.0 |
|
|
| 112 |
NTH(WR)/MECH/CUSTOM/019 (2024) - Fence Items and Accessories - GI Core Wire (Raw Material) and Galvanized Steel Strip |
Fence Items and Accessories - GI Core Wire (Raw Material) and Galvanized Steel Strip |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Diameter of core wire as per IS 280) |
1000.0 |
|
| 2 (Mechanical Properties as per IS 1608) |
4000.0 |
|
| 3 (Mass of Zinc Coating (GSM) as per IS 6745/ IS 4826) |
1200.0 |
|
| 4 (Galvanized Steel Strip Mechanical Properties as per IS 277) |
7000.0 |
|
| 5 (Galvanized Steel Strip Thickness as per IS 277) |
1000.0 |
|
| 1 (Diameter of core wire as per IS 280) |
1000.0 |
|
| 2 (Mechanical Properties as per IS 1608) |
4000.0 |
|
| 3 (Mass of Zinc Coating (GSM) as per IS 6745/ IS 4826) |
1200.0 |
|
| 4 (Galvanized Steel Strip Mechanical Properties as per IS 277) |
7000.0 |
|
| 5 (Galvanized Steel Strip Thickness as per IS 277) |
1000.0 |
|
|
| 113 |
NTH(WR)/MECH/CUSTOM/018 (2024) - Fence Items and Accessories - GI Anchor Rod |
Fence Items and Accessories - GI Anchor Rod |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Mass of Zinc Coating (DFT/GSM) as per ISO 2808/IS 4759/IS 4826) |
1200.0 |
|
| 2 (Dimensions) |
1000.0 |
|
| 3 (Mechanical
Property as per
IS 5986 Grade 235
/ IS 2062 GRADE
E250) |
5000.0 |
|
|
| 114 |
NTH(WR)/MECH/CUSTOM/017 (2024) - Fence Items and Accessories - SS Nuts and Bolt |
Fence Items and Accessories - SS Nuts and Bolt |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Mechanical Property (Tensile Strength) as per IS 8535 1937/IS 1608) |
5000.0 |
|
| 2 (Grade of Bolt as per Relevant EN/AST M/ISO Test Methods) |
5000.0 |
|
| 3 (Grade of Nut as per Relevant EN/AST M/ISO Test Methods) |
5000.0 |
|
|
| 115 |
NTH(WR)/MECH/CUSTOM/016 (2024) - Fence Items and Accessories - IP Binder (Raw Material) and Dual Powder Coating (Finished) |
Fence Items and Accessories - IP Binder (Raw Material) and Dual Powder Coating (Finished) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Thickness as per IS 277 OR IS 513 OR IS 1079) |
1000.0 |
|
| 2 (Mechanical Property as per As per IS 277 OR IS 1079 or IS 513) |
4000.0 |
|
| 3 (Mass of Zinc Coating (DFT/GSM) as per IS 6745 / IS 4759 / ISO 2808) |
1500.0 |
|
| 4 (Colour as per EN 10245-1/IS 13871) |
1200.0 |
|
| 5 (Dry Film Thickness as per EN ISO 2808) |
1200.0 |
|
|
| 116 |
NTH(WR)/MECH/CUSTOM/015 (2024) - Fence Items and Accessories - Omega Clamp with Profile Cover plate and Corner cody clamp (Raw Material) with dual powder coating (Finished ) |
Fence Items and Accessories - Omega Clamp with Profile Cover plate and Corner cody clamp (Raw Material) with dual powder coating (Finished ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Diameter as per IS 277 OR IS 513 GRADE CR1 "0" OR IS 1079) |
1000.0 |
|
| 2 (Dimensions) |
1000.0 |
|
| 3 (Mechanical Property as per As per IS 277 OR IS 1079 or IS 513) |
4000.0 |
|
| 4 (Mass of Zinc Coating (DFT/GSM) as per ISO 2808/IS 1730) |
1200.0 |
|
| 5 (Colour as per EN 10245-1/IS 13871) |
1200.0 |
|
|
| 117 |
Adhesion to Steel(Shear) - Customized specification for Adhesion to Steel(Shear) |
Customized specification for Adhesion to Steel(Shear) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Adhesion to Steel(Shear) as per ASTM D 1002) |
3000.0 |
|
|
| 118 |
NTH(WR)/MECH/CUSTOM/014 (2024) - Fence Items and Accessories - Angels for Y arms (Raw Material) and TPC Powder Coating |
Fence Items and Accessories - Angels for Y arms (Raw Material) and TPC Powder Coating |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Leg Length of Y Arm in mm) |
1000.0 |
|
| 2 (Y Arm Mechanical Property as per IS 2062 (Yield strength, Tensile Strength, % of Elongation and Bend )) |
5500.0 |
|
| 3 (Straining Y Arm Mass of Zinc Coating (DFT/GSM) as per IS 4759/ASTM A 123) |
1500.0 |
|
| 4 (Straining Y Arm Adhesion of Zinc Coating on Wire as per IS 2629/IS 6745) |
2000.0 |
|
| 5 (Straining Y Arm Uniformity of Coating as per IS 2629) |
1500.0 |
|
| 6 (Straining Y Arm Colour as per EN 10245-1/IS 13871) |
1200.0 |
|
| 7 (Straining Y Arm Dry Film Thickness as per EN ISO 2808) |
1500.0 |
|
| 8 (Y Arm Mass of Zinc Coating (DFT/GSM) as per IS 4759/ASTM A123/IS 2629) |
1200.0 |
|
| 9 (Y Arm Adhesion of Zinc Coating on Wire as per IS 2629/IS 6745) |
2000.0 |
|
| 10 (Y Arm Uniformity of Coating as per IS 2629) |
1200.0 |
|
| 11 (Y Arm Colour as per EN 10245-1/IS 13871) |
1200.0 |
|
| 12 (Y Arm Dry Film Thickness as per EN ISO 2808) |
1200.0 |
|
|
| 119 |
NTH(WR)/MECH/CUSTOM/013 (2024) - Fence Intems and Accessories -Galvanised Circular Hollow Section (Raw material) and TPC Powder Coating |
Fence Intems and Accessories -Galvanised Circular Hollow Section (Raw material) and TPC Powder Coating |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Outside Diameter as per IS 1161-2014) |
1000.0 |
|
| 2 (Thickness as per IS 1161-2014) |
1000.0 |
|
| 3 (Flatting Test as per IS 2328) |
1000.0 |
|
| 4 (Mass of Zinc
Coating
(DFT/GSM)
IS 4759 or IS 4736
/ ASTM A 123) |
1500.0 |
|
| 5 (Adhesion of Zinc coating) |
2000.0 |
|
| 6 (Uniformity of
Coating IS 2629) |
1500.0 |
|
| 7 (Colour EN 10245-1/IS
13871) |
1200.0 |
|
| 8 (Dry Film
Thickness EN ISO 2808) |
1200.0 |
|
| 9 (Yield Strength in MPa as per product specification IS 1161 refered Test method IS 1608 Part-1 latest editions) |
1500.0 |
|
| 10 (Tensile Strength in MPa as per Product Specification IS 1161 refered Test Method IS 1608 Part-1) |
1500.0 |
|
| 11 (% of Elongation as per Product specification IS 1161 refered Test Method IS 1608 Part-1 latest edition) |
1000.0 |
|
|
| 120 |
NTH(WR)/MECH/CUSTOM/012 (2024) - Fence Items and Accessories - Welded Mesh and Finished (Coated) Panels with Dual Powder Coating (Finished Good on Weld Mesh Panel) |
Fence Items and Accessories - Welded Mesh and Finished (Coated) Panels with Dual Powder Coating (Finished Good on Weld Mesh Panel) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Panel Dimensions in mm as per EN 10223-7) |
1000.0 |
|
| 2 (Mesh Size as per EN 10223-7) |
1000.0 |
|
| 3 (Weld Shear Strength as per EN 10223-7) |
5000.0 |
|
| 4 (Colour as per EN 10245-1/IS 13871) |
1200.0 |
|
| 5 (Dry Film Thickness as per EN ISO 2808) |
1200.0 |
|
| 6 (Resistance to
deformation as per
EN 10245-4/ EN
ISO 1519) |
1200.0 |
|
|
