NTH - Management Information System

National Test House (WR), Mumbai

Plot No. F 10, M.I.D.C, Marol, Andheri (E), Mumbai Maharashtra - 400093, Mumbai, Mumbai, Maharashtra, 400093

28260927 director-mum[at]nth[dot]gov[dot]in

Scope List

Reset

659 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

Customized Specification for NUWARE MICROWAVE SAFE DINNER SET - Customized Specification for NUWARE MICROWAVE SAFE DINNER SET

Customized Specification for NUWARE MICROWAVE SAFE DINNER SET

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature)	500.0
- (Description)	500.0
- (Colour)	500.0
- (Packing Specification)	500.0
- (Identification Mark/Marking)	500.0
- (Active Ingredient)	2000.0

RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter V/Cl. 3.2 (Abrasion resistance-1000 cycles)	3000.0
Chapter V/Cl. 3.2 (Humidity test.)	11000.0
Chapter V/Cl. 3.2 (Durability Tests : Accelerated weathering test)	110000.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to solvents)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to water)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to oil)	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests Resistance to 20% caustic potash (weight by volume))	1500.0
Chapter V/Cl. 3.2 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume))	1500.0
Chapter V/Cl. 3.2 (Gloss at 60 degree angle of incidence)	1200.0
Chapter V/Cl. 3.2 (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter V/Cl. 3.2 (Fineness of grind)	1200.0
Chapter V/Cl. 3.2 (Theoretical Spreading rate)	1200.0
Chapter V/Cl. 3.2 (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter V/Cl. 3.2 (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter V/Cl. 3.2 (Mass in Kg/10 litres)	1200.0
Chapter V/Cl. 3.2 (Keeping Properties for both the packs)	5000.0
Chapter V/Cl. 3.2 (Flash Point (b) Component B)	1200.0
Chapter V/Cl. 3.2 (Flash Point (a) Component A)	1200.0
Chapter V/Cl. 3.2 (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter V/Cl. 3.2 (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter V/Cl. 3.2 (Volume solids)	1200.0
Chapter V/Cl. 3.2 (Dry film thickness/Per coat)	1200.0
Chapter V/Cl. 3.2 (Colour)	1200.0
Chapter V/Cl. 3.2 (Finish)	1200.0
Chapter V/Cl. 3.2 (Consistency)	1200.0
Chapter IV / Table I (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter V/Cl. 3.2 (Drying time b) Hard Dry)	1200.0
Chapter V/Cl. 3.2 (Drying time a) Surface Dry)	1200.0
Chapter II/Cl. 4.1 (Theoretical Spreading Capacity)	1200.0
Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation)	9000.0
Chapter II/Cl. 4.1 (Resistance to salt spray)	21000.0
Chapter II/Cl. 3.2.1.2 (Pigment Content)	1500.0
Chapter II/Cl. 3.2.1.1 Table 1 (Weight per epoxy equivalent on non-volatile vehicle content basis)	3000.0
Durability test (Durability test, Accelerated test for durability, 750 hrs, (ASTM G 53) 4 hrs UV and 4 hrs condensation)	45000.0

BSEN 13348 (2016) - Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

Copper and Copper Alloy - Seamless Round Copper Tube for Medical Gases or vacuum

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Dimension - Outer Diameter mm, in accordanc e with BS EN 13348 (2016) Table 2, 3 and 4)	1000.0
6.3 (Dimension - Thickness of the Tube in mm in accordance with BS EN 13348(2016) Table 2, 3 and 4)	1000.0
6.2 (Tensile Strength)	2000.0
6.2 (Elongation)	1000.0
6.2 (Hardness)	2000.0
8.5 (Bending Test)	1000.0
8.6 (Drift Expansion test)	2000.0
6.1 (Cu + Ag)	4000.0
6.1 (Phosphorus (% by mass))	1000.0
6.1 (Copper (% by mass))	2000.0

IS 8887 (2004) - Bitumen Emulsion for Roads (Cationic Type)

Bitumen Emulsion for Roads (Cationic Type)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 and 6.2 (Viscosity by say bolt viscometer)	1000.0
4.2 and 6.2 (Solubility in Trichloroethylene)	1000.0
4.2 an 6.2 (Residue by Evaporation)	1500.0

IS 14223 (Part 1):2023 - Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5,Table 1-(i) (Specific gravity ( as per IS 1124))	1000.0
5,Table-1(ii) (Water absorption (as per IS 1124))	1000.0
5,Table-1(iii) (Compressive strength, in N/mm2 (as per IS 1121 (Part 1)))	3000.0
5,Table-1(vi) (Hardness, in Mohs (as per IS 13630 (Part 13)))	2000.0
5,Table-1(x) (Resistance to wear- a)Average b)Individual maximum, in mm (as per IS 1706))	4000.0
custom (Moisture content (%))	500.0
custom (Dry density)	1000.0
custom (Flexural strength)	3000.0
custom (Porosity)	1000.0

Custom specification- Bipolar for metro rail (general chemical) - Custom specification- Bipolar for metro rail (general chemical)

Custom specification- Bipolar for metro rail (general chemical)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Appearance)	500.0
- (Odour)	500.0
- (Skin Irritation)	500.0
- (pH Value)	1000.0
- (Viscosity by Flow cup)	1000.0
- (Accelerated Corrosion test ( For 21 Hours) with raw water)	1500.0
- (Accelerated Corrosion (for 21 hours) with Bipolar)	1500.0
- (Specific Gravity)	1000.0

IS 8986 (2022) (2022) - Hexagonal Integral Drill Steel and Extension Rods and Hollow Round Drill Steel in Bar Form — Dimensions (Second Revision)

Hexagonal Integral Drill Steel and Extension Rods and Hollow Round Drill Steel in Bar Form — Dimensions (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Dimension - Hexagonal Integral Drill Steel and Extension Rods in mm Clause 2.1 and Table 1 of IS 8986 or any other relevant National & International Standard Specified)	1000.0
2 (Dimension -Hollow Round Drill Steel in Bar Form for Extension Rods, in mm, Clause 2.2, Table 2 of IS 8986 or any other national or International Stanard specified)	1000.0
2 (Mass per Meter in Kg/M as per Table 1 or 2 of IS 8986 or any other National or International Standard specified.)	1000.0
0 (Rockwell Hardness Test in HRC)	2000.0
0 (Mechanical Properties - Tensile Strength, Yield Strength and % of Elongation as per IS 1608 Prt-1 or ASTM E8 or any other relevant National or International specification.)	4000.0
2 (Sectional Area in mm2 as per IS 8986 Clause 2 Table 1 /Table 2)	1000.0
0 (Chemical Composition in mass% by OES method or any other National or International product specification specified test method.)	3500.0

IS 17044 (2018) - Intumescent fire retardant paint (Water Based) - Specification

Intumescent fire retardant paint (Water Based) - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Intumescent fire retardant paint (Water Based) - Specification (Please refer to the annexure for the test result)	10000.0

IS 5758 (2020) - Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons

Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Dimensions, Overall Length, in mm)	500.0
9.2 (Dimensions, Overall Height, in mm)	500.0
9.2 (Overall Thickness, in mm)	500.0
9.3 (Bending Strength, N/mm^2)	4000.0
9.4 (Water Absorption, in %)	2000.0
4.2 (Shape and Profile)	1000.0

IS 15961 (2012) - Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Triple Spot Coating Mass)	2000.0

IS 15965 : 2012 (2012) - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Total Coated Thickness (As received condition), mm)	1000.0
8 (Tensile Strength (As per IS 15961), MPa)	1000.0
8 (Yield Strength (As per IS 15961), MPa)	1000.0
8 (% Elongation (As per IS 15961), %)	1000.0
7.1 (Mass of Coating (Both sides), g/m²)	2000.0
5 (Chemical composition (As per IS 513), % by mass)	2500.0
1 (Composition of AZ Coating Material in %)	3000.0

Customized Specification for Plastic Bottle with cap - Customized Specification for Plastic Bottle with cap

Customized Specification for Plastic Bottle with cap

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Identification of Plastic bottle body by FTIR)	2000.0
- (Identification of plastic cap by FTIR)	2000.0

- (2025) - Customize General chemical specifical NTH (WR)

Customize General chemical specifical NTH (WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Appearance)	500.0
- (Specific gravity)	1000.0
- (Releasing Properties)	3000.0
- (Flash Point by COC)	1000.0
- (Fire Point by COC)	1000.0
- (Aluminium Reactivity at 60 deg. C for 72 hours)	1000.0
- (Effect on Wooden Ply at 60 deg C. for 72 hours)	1000.0
- (Viscosity by Flow Cup)	1000.0

16720 (2018) - Pulverized Fuel Ash - Cement Bricks

Pulverized Fuel Ash - Cement Bricks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (General)	500.0
8.2 (Dimension, Length, in mm)	500.0
8.2 (Dimensions, Width)	500.0
8.2 (Dimensions, Thickness, in mm)	500.0
8.3 (Density, in kg/m^3)	1000.0
8.4 (Compressive Strength, in N/mm^2)	2000.0
8.5 (Drying Shrinkage, in %)	2000.0
8.6 (Water Absorption Test)	1000.0

IS 18387 (2023) - Gypsum Ceiling Tiles

Gypsum Ceiling Tiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1.1 (Dimensions and Tolerances on size, Length in mm)	500.0
7.1.1 (Dimensions and Tolerances on Size, Width)	500.0
7.1.2 (Dimensions and Tolerances on Edges Profile)	500.0
7.2.2 (Tolerances on Squareness of Edges,)	500.0
7.3 (Density, in kg/m^3)	1000.0
7.4 (Flexural Breaking Strength (Length wise), in N)	2000.0
7.4 (Flexural Breaking Strength (Across the length), in N)	2000.0
7.5 (Water Absorption, in %)	1000.0
7.8 (Humidified Deflection, in mm)	5000.0

Customized Specification for Plastic Material - Customized Specification for Plastic Material

Customized Specification for Plastic Material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Material Identification by FTIR)	2000.0
- (Hardness)	1000.0

Customized specification for T Shirt - Customized specification for T Shirt

Customized specification for T Shirt

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Size)	500.0
- (Material(composition))	2000.0
- (Mass of material)	1000.0
- (Knitting)	500.0
- (Lining)	500.0
- (Neck type)	500.0
- (Sleeve)	500.0
- (Pocket)	500.0
- (Logo)	500.0

Customized specification for peak cap - Customized specification for peak cap

Customized specification for peak cap

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Material)	2000.0
- (Diameter)	500.0
- (Peak)	500.0
- (Complete height(Peak to top))	500.0
- (Side button of white metal with steel emblem)	500.0
- (Width of leather strip)	500.0
- (Inner side material)	500.0
- (Band Patti)	500.0

Customized Specification for Bag - Customized Specification for Bag

Customized Specification for Bag

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Type of Bag)	500.0
- (Main Outside material)	2000.0
- (Inside material)	500.0
- (Material of straps/Tapes/webbing)	2000.0
- (Slide fasteners)	1000.0
- (Side Pocket material (for bottle))	1000.0
- (Backside material(for backpack))	2000.0
- (Number of inside compartment(full pockets))	500.0
- (Number of inside patch pockets)	500.0
- (Water resistance)	500.0
- (Height)	500.0
- (Width)	500.0
- (Depth)	500.0
- (Type of Logo)	500.0
- (Buckle material)	2000.0

CUS/SR/MECH-22 - Stainless Steel Insu-Roti Saver (Mini)

Stainless Steel Insu-Roti Saver (Mini)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions)	2000.0
2.0 (Weight)	500.0
3.0 (Capacity)	1000.0
4.0 (Chemical composition, % by mass)	3000.0

IS 6603 (2024) - Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Freedom From Defects - Visual Examination as per IS 6603 Cl.6.1 & 6.2)	1000.0
7 (Chemical Composition-The ladle analysis of steel, when carried out either by the methods specified in relevant parts of IS 228 or any other established international instrumental/chemical method)	5000.0
9.0 Mechancial Properites (The tensile test ( Tensile Stregth, 0.2% Proof/Yield Stress, % of Elongation ) shall be carried out in accordance with IS 1608 (Part 1))	3000.0
9.0 Mechancial Properties (Hardness shall be determined in accordance with IS 1500 (Part 1), IS 1501 (Part 1) or IS 1586 (Part 1).)	2000.0
9.0 Mechanical Properties (Charpy impact test shall be carried out in accordance with IS 1757 (Part 1).)	5000.0
12 (Dimesnion Measurment in mm dimensional tolerances for the bars and flats shall be as laid down in Table 26 to Table 36 given at Annex C of IS 6603)	1000.0
14 (Corrosion Resistance Test - The material shall be tested for corrosion resistance as per IS 10461 (Part 1) or ISO 3651 (Part 2) or any other method)	10000.0

RDSO/2020/GE:IRS-0004 (2020) - Comprehensive Guidelines and Specification for Railway Formation

Comprehensive Guidelines and Specification for Railway Formation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.8 (Gradation of Particles, % passing)	5000.0
3.8 (Particle passing 75 microns, %)	1000.0
3.8 (Coefficient of Curvature)	1500.0
3.8 (Uniformity Coefficient)	1500.0
3.8 (California Break Ration (CBR in Dry condition) Test)	7000.0
3.8 (California Break Ration (CBR in Wet Condition))	7000.0
3.8 (Aggregate Abrasion Value (Los Angeles), %)	2000.0
3.8 (Aggregate Impact Value, %)	2000.0
- - (Atterberg Limits)	3000.0
Fig. 3.8 (Enveloping Curves for Blanket Material from Sieve Analysis)	1000.0
3.8 (Maximum Dry Density & Optimum Moisture Content (OMC & MDD))	5000.0

RDSO/2020/GE:IRS-0004/September 2020 (Including ACS No 01 dated 16.12.2021) - Comprehensive guidelines and Specifications for Railway formation

Comprehensive guidelines and Specifications for Railway formation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3.2.C.1 (The Uniformity of Co-efficient(Cu):(as per IS 2720(1)1983/IS 1498:1970))	1500.0
7.3.2.C.1 (The Co-efficient of Curvature -Cc (IS 2720(1):1983/IS 1498(1970))	1500.0
7.3.2.C.1 (Percentage of Fines(Passing 75 micron)-IS 2720(1):1983/IS 1498:1970)	1000.0
7.3.2.C.2 (CBR test)	6000.0
7.3.2.C.3 (Los angeles abrasion value)	1500.0
7.3.2.C.6 (Checking of forming with enveloping curves)	2000.0
6.2.8.C (OMC &MDD (IS 2720(8)):1983)	5000.0

IS/RDSO-GE/0001:23 (2023) - Specification for Track Ballast

Specification for Track Ballast

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.2 (Aggregate Abrasion Value, Average Value in %)	2000.0
2.2 (Aggregate Impact Value, Average value in %)	2000.0
2.2.3 (Water Absorption, in %)	1000.0
2.3 (Sieve Analysis, Retention on 65mm sq. mesh sieve, in %)	1000.0
203 (Sieve Analysis, Retention on 40mm sq. mesh sieve, in %)	1000.0
2.3 (Sieve Analysis, Retention on 20mm sq. mesh sieve, in %)	1000.0

- - Custom Specification for coal analysis-General Chemical (WR)

Custom Specification for coal analysis-General Chemical (WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash Content%)	1500.0

Customized specification for VIP frenchie Pro Brief Colour 90 cm. as per TDS Index no. 41294 - Customized specification for VIP frenchie Pro Brief Colour 90 cm. as per TDS Index no. 41294

Customized specification for VIP frenchie Pro Brief Colour 90 cm. as per TDS Index no. 41294

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature)	500.0
- (Identification Mark/Marking)	500.0
- (Fibre Composition)	1000.0
- (Count)	500.0
- (Dimensional Change)	1000.0
- (Wales and Course)	500.0
- (pH)	1000.0
- (Colour fastness to washing)	1000.0
- (Size)	500.0
- (Waist band width)	500.0
- (Side length(including waist band))	500.0
- (Full width flat)	500.0
- (Centre height (including waist band))	500.0
- (Pouch with front(bottom))	500.0
- (Half leg open)	500.0
- (Width of top elastic)	500.0

Customized specification for VIP FRENCHIE COLOURED 85 CMS as per TDS Index no. 41546 - Customized specification for VIP FRENCHIE COLOURED 85 CMS as per TDS Index no. 41546

Customized specification for VIP FRENCHIE COLOURED 85 CMS as per TDS Index no. 41546

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature)	500.0
- (Identification Mark/Marking)	500.0
- (Fibre Composition)	1000.0
- (Count)	500.0
- (Wales and Course)	500.0
- (pH value)	1000.0
- (Size)	500.0
- (Waist band width)	500.0
- (Side length)	500.0
- (Full width flat)	500.0
- (Central height(including waist band))	500.0
- (Pouch width(bottom))	500.0
- (Half leg open)	500.0
- (Width of inner elastic)	500.0

Customized specification for Camber Tray Set as per TDS Index no. 34442 - Customized specification for Camber Tray Set as per TDS Index no. 34442

Customized specification for Camber Tray Set as per TDS Index no. 34442

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Dimensions of Camber large tray)	500.0
- (Dimensions of camber medium tray)	500.0
- (Dimensions of camber small tray)	500.0
- (Weight of camber large tray)	500.0
- (Weight of camber medium tray)	500.0
- (Weight of camber small tray)	500.0
- (Colour)	500.0
- (Material Identification)	2000.0
- (Identification mark/marking)	500.0
- (Design)	500.0

Custom specification CSD Canteen Chemical Lab samples - Custom specification CSD Canteen Chemical Lab samples

Custom specification CSD Canteen Chemical Lab samples

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Camphor analysis (Please refer annexure for the test result of Camphor samples)	6000.0
AGARBATTlS - SPECIFICATION (Please refer annexure for the test result (Agarbattis/Incense sticks))	7000.0
Cosmetic products (Please refer annexure for the test results)	5000.0

Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies - Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies

Customized Specification for Non Metallic Liners/Packing Plates for Use in CASBUS Bogies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Specific Gravity as per ASTM D 790)	1000.0
- (Hardness as per ASTM D 2240)	1000.0
- (Tensile Strength at yield as per ASTM D 638)	2000.0
- (Flexural Modulus as per ASTM D 790)	2000.0
- (Water absorption at 23(+/-)1deg.C for 24(+1/2, -o)hours)	2000.0

First
Prev
2
3
4
5
Next
Last