NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

301

RDSO/PE/SPEC/TL/0091-2016(Rev-1) (2016) - SPECIFICATION FOR ENERGY EFFICIENT LED BASED LUMINAIRE UNITS FOR PASSENGER COACHES

SPECIFICATION FOR ENERGY EFFICIENT LED BASED LUMINAIRE UNITS FOR PASSENGER COACHES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8(i) (Visual and Dimensional Check)	1000.0
8(iii) (Resistance to Humidity)	4000.0
8(iv) (Insulation resistance test)	4000.0
8(v) (HV Test)	5000.0
8(vi) (Over Voltage Protection)	2000.0
8(vii) (Wattage Measurement)	2000.0
8(viii) (The luminaire shall withstand Short circuit protection. The luminaire shall work normal after re-setting.)	1000.0
8(ix) (Surge Protection Test)	5000.0
8(x) (Reverse Polarity)	2000.0
8(xi) (Temperature Rise Test)	5000.0
8(xii) (. The Colour Rendering Index shall be minimum 80)	10000.0
X(iii) (Lux measurement)	5000.0
8(xv) (Test for IP Protection as per IEC 60529)	15000.0
8[xv(i)] (Test for IP X5 As per IEC 60529)	3000.0
8(xvi) (The complete unit cubicle together with its mounting arrangements (including shock absorbing devices, if provided) shall be subjected to the vibration testing (for Category-1, Class A) as per latest IEC 61373.)	15000.0
8(xvi-I) (The complete unit cubicle together with its mounting arrangements (including shock absorbing devices, if provided) shall be subjected to the shock testing (for Category-1, Class A) as per latest IEC 61373.)	10000.0
8(xvii-a (Dry Heat Test as per requirements of IEC 60571)	10000.0
8(xvii-b) (Damp Heat Test as per requirements of IEC 60571)	15000.0
8(xvii-c) (As per IEC 60571)	3000.0
8(xxi) (Safety Test)	20000.0
28379 (Viscosity by flow cup)	1000.0

302

Specification for Saif Seal Fire Resistant Cement/Putty - Specification for Saif Seal Fire Resistant Cement/Putty

Specification for Saif Seal Fire Resistant Cement/Putty

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D149 (Dielectric Strength Test)	15000.0
ASTM D257 (Surface Resistivity/Volume resistivity)	10000.0

303

IS 854 (2021) - Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification

Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Count of Yarn (Warp))	500.0
5.1 (Count of yarn (Weft))	500.0
5.1 (Ends/dm)	500.0
5.1 (Picks/dm)	500.0
5.1 (Mass)	1000.0
5.1 (Weave)	500.0
5.1 (Breaking Load (Warp))	1000.0
5.1 (Breaking Load (Weft))	1000.0
5.2 (Identification of material)	2000.0
5.2 (Dimensional Change)	2000.0
5.2 (Scouring loss)	2000.0
5.2 (Color fastness to light)	3000.0
5.2 (Color fastness to washing)	2000.0
5.2 (Color fastness to rubbing)	2000.0
5.2 (Wettability)	1000.0

304

CUSTOM/NYLON CAGE/2023 - CUSTOM/NYLON CAGE/2023

CUSTOM/NYLON CAGE/2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Size of the Cage.)	500.0
2.0 (Size of Mesh.)	500.0
3.0 (Yarn Count in Denier.)	1000.0
4.0 (Tensile Strength of Nylon rope.)	2000.0

305

IRS T - 42: 2020 (2020) - Single Coil Spring Steel washers for Track

Single Coil Spring Steel washers for Track

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2.1 (Rockwell Hardness Sacle-C)	2000.0
9.3 (Dimension)	1000.0
9.4 (Decarburization Test)	3000.0
7.3 (Decompression Test)	2000.0
7.2 (Flattening Test)	1000.0
9.1 (Carbon)	500.0
9.1 (Sulphur)	500.0
9.1 (Phosphorus)	500.0
9.1 (Manganese)	500.0
9.1 (Silicon)	500.0
4 (Freedom from defects)	1000.0

306

Custom Specification - GPS Tracker

GPS Tracker

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Environmental Test)	15000.0
- (Battery Testing)	10000.0

307

NFC-33 041 (1998) - Insulated cables and their accessories for power systems Anchoring devices for overhead distribution with bundle assembled cores of rated voltage of 0.6/1 kV

Insulated cables and their accessories for power systems Anchoring devices for overhead distribution with bundle assembled cores of rated voltage of 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (High Voltage Test)	5000.0
- (Dimension test)	1000.0

308

NFC-33 040 (1988) - Insulated cables and their accessories for power systems Suspension equipments for overhead distribution with bundle assembled cores of rated voltage 0.6/1 kV

Insulated cables and their accessories for power systems Suspension equipments for overhead distribution with bundle assembled cores of rated voltage 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (High Voltage Test)	5000.0
- (Dimension Test)	1000.0

309

Custom - Bitumen GP

Bitumen GP

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Penetration)	1000.0
2 (Solubility in TCE)	1000.0
3 (Softening point)	1000.0
4 (Ash content)	1000.0
5 (Density)	1000.0

310

Custom - Bitumen Content BC

Bitumen Content BC

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Bitumen content BC)	3000.0

311

Custom - Bitumen DBM

Bitumen DBM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Bitumen content in DBM)	3000.0

312

CUSTOMER SPECIFICATION FIRE RETARDANTCEMENT /PUTTY (2023) - CUSTOMER SPECIFICATION FIRE RETARDANTCEMENT /PUTTY

CUSTOMER SPECIFICATION FIRE RETARDANTCEMENT /PUTTY

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Appearance &Colour)	200.0
3 (Density As per IS std)	1000.0
4 (Fire test on metal surface for 02 Hours)	5000.0
5 (Surface spread of Flame test Bs 476 part 7)	5000.0
6 (Temperature resistance test 650 deg C ASTM D 2485)	2500.0
7 (Salt spray test for 96 hours ASTM B 117)	4800.0

313

Custom-34-NTH-LM - W-Beam Metal Crash Barrier

W-Beam Metal Crash Barrier

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile Strength)	2000.0
2 (Yield stress)	1000.0
3 (Elongation)	1000.0
4 (Mass per Metre)	1500.0
5 (Bend Test)	1000.0
6 (Carbon)	500.0
7 (Sulphur)	500.0
8 (Phosphorus)	500.0
9 (Manganese)	500.0
10 (Carbon Equivalent)	500.0

314

ELRS /SPEC/ SI /0015 (2001) - SPECIFICATION FOR RELIABILITY OF ELECTRONICS USED IN ROLLING STOCK APPLICATION

SPECIFICATION FOR RELIABILITY OF ELECTRONICS USED IN ROLLING STOCK APPLICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.7 & Annexure-1 (Burn – in test)	20000.0

315

IS 6745 (1972) - Mass of Zinc Coating (IS 6745)

Mass of Zinc Coating (IS 6745)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Mass of Zinc Coating (IS 6745:1972))	1000.0

316

NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023 (2023) - NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023

NTH ER PAINT LAB CUSTOMER SPECIFICATION 2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Acid value %)	1200.0
2 (Wet Opacity/Coverage capacity Minimum & Maximum(as per IS 101))	1500.0
3 (Drying Time at 30 Deg C a) Surface Dry b) Hard Dry as per IS 101)	1200.0
4 (Mass in Kg/10 litre as per IS 101)	1200.0
5 (Salt spray Test 5 % NAcl solution for 100 hours ASTM B 117)	5000.0
6 (Abrasion Resistance Test ASTM D 4060)	3500.0
7 (Density gm/cc IS 101 part1 Sec 7)	1200.0
8 (Solid content % IS 101 part8 Sec 2)	1200.0
10 (PH at 25 Deg C)	500.0
12 (2000 hrs QUV)	100000.0

317

CUSTOM-25-ER-MCALI - Calibration of Floating Carriage Micrometer

Calibration of Floating Carriage Micrometer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Length)	2400.0

318

IS 16172 (2023) - Reinforcement couplers for mechanical splices of bars in concrete - Specification

Reinforcement couplers for mechanical splices of bars in concrete - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Visual Observation (Workmanship and Finish))	1000.0
8 (Chemical composition, % by mass)	3000.0
9.2 (Tensile Strength as per IS 1608(Part 1):2022)	1500.0
9.2 (Percentage Elongation as per IS 1608(Part 1):2022)	1500.0
9.2 (Visual Observation for Nature & Location of failure of spliced specimen (With Coupling).)	1000.0
0 (Test results as per customer test request.)	15000.0
9.2.1 (The tensile strength of the spliced bar ( With Coupling))	2500.0
9.2.2 (The minimum percentage elongation at maximum force (also termed as uniform elongation) for spliced bar ( with coupler) when measured in accordance with the method given in Annex B in the reinforcing bar outside the length of the mechanical splice before failure.)	1000.0
9.2.2 (The percentage elongation at maximum force for unspliced specimen)	1000.0

319

CUSTOM-24-ER-MCALI (2023) - Calibration of Profile Projector

Calibration of Profile Projector

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Magnification)	2000.0
2 (Angle)	2000.0
3 (Length)	2000.0
4 (Length)	2000.0

320

IS 9857:1990 (1990) - Welding Cable Specification

Welding Cable Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1.a.2 (Test on Conductor- Conductor Resistance Test)	2500.0
10.1.b (Test for thickness of Covering)	1500.0
10.1.d (High Voltage Test (Water Immersion Test))	3500.0

321

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
APPENDIX –VII METHOD OF IDENTIFYING AROMATIC AND ALIPHATIC ISOCYANATE (Identification of poly isocyanate ( aliphatic or aromatic in nature) procedure in Appendix- VII. Specification No M&C /PCN/100/2018)	3000.0

322

IS 4984:2016 (2016) - Polyethylene pipes for water supply - Specification (Fifth Revision)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Slow Crack Growth Rate)	2000.0
8.9 (b) (Elongation at break)	1500.0
8.8 (Tensile Strength for Butt-fusion)	1000.0
8.7 (Density at 27 degree celsius (base density))	1000.0
8.6 (Overall Migration (Chemical Lab))	2000.0
8.5 (Oxidation Induction Time)	2000.0
8.4 (Melt Flow Rate at 190 degree celcius and 5kgf)	2000.0
8.3 (Carbon Black Content)	2000.0
8.2 (Longitudinal Reversion Test)	2000.0
8.1 (Hydraulic Characteristics)	5000.0
7.4 (Wall Thickness)	500.0
7.3 (Coiling)	1000.0
7.2 (Length)	1000.0
7.1 (Visual Appearance)	500.0
6.2 (Colour)	-
8.3 (Carbon Black Dispersion)	1000.0
7.4.1 (Outside Diameter)	500.0
7.4.1.2 (Ovality)	100.0
6.2.1 (Colour Of strip)	-
6.2.1 (Width Of Strip)	100.0
6.2.1 (Depth Of strip)	100.0
8.1 (Internal Pressure Creep Rupture test of pipe for 165 hrs at 80deg.)	5000.0
8.1 (Internal Pressure Creep Rupture test of pipe for 48 hrs at 80deg.)	5000.0
8.1 (Internal Pressure Creep Rupture test of pipe Joints for 48 hrs at 80deg.)	5000.0
8.1.1 (Internal Pressure Creep Rupture test at 27 deg. for 100 hrs.)	5000.0
8.1 (Internal Pressure Creep Rupture test for 1000 hrs. at 80deg.)	20000.0
8.9 (Elongation at Break Annex.-H, Table-6 (IS:4984-2016))	1000.0
8.9 (IS:4984, Annex.-H (Tensile Strength))	1000.0
Firm's request (Hardness(Shore D))	1000.0
firm's request (Density)	2000.0
Firm's request (Melting Point)	1000.0

323

Custom-33-ER-LM - Load Test

Load Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Load Test)	15000.0

324

Custom - Raw Water (NMDC) (Vide Annexure)

Raw Water (NMDC) (Vide Annexure)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Chemical Parameters Vide Annexure)	12000.0

325

CUSTOM/TEXTILE/2024 - CUSTOM/TEXTILE/2024

CUSTOM/TEXTILE/2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Average GSM)	1000.0
2.0 (Thread per inch (Warp))	500.0
3.0 (Threads per inch (Weft))	500.0
4.0 (Yarn Count (warp))	1000.0
5.0 (Yarn Count (Weft))	1000.0
6.0 (Blend Composition %)	2000.0
7.0 (Colour Fastness to Washing)	2000.0
8.0 (Type of Weave)	500.0
9.0 (pH)	1000.0
10 (Tensile Strength)	2000.0

326

Valve protective coating on Ductile Cast Iron (as per BS 2789 Gr 420/12 or 500/7) (2023) - Valve protective coating on Ductile Cast Iron (as per BS 2789 Gr 420/12 or 500/7)

Valve protective coating on Ductile Cast Iron (as per BS 2789 Gr 420/12 or 500/7)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Coating dry film thickness (DFT) for flat surface Cl 5.3.1 of DIN 30677- Part 1)	1000.0
2 (Coating dry film thickness (DFT) for convex surface Cl 5.3.21 of DIN 30677 Part 1)	1000.0
3 (Cyclic Salt Spray Test (for 24 hours) ASTM B 117)	6000.0
4 (Cycle Artificial Weathering Test 100% Humidity (for 24 hours ASTM D 2247 10 Cycles)	6500.0
5 (Cathodic Disbondment Test (for evaluation of any pitting development) For 30 days at 23 ± 2° C ASTM G-95)	7500.0
6 (Cathodic Disbondment Test (for evaluation of any pitting development) For 2 days at 65 ± 2° C ASTM G-95)	1500.0
7 (Bond Strength Cl 4.2.2 of DIN 30677 Part 1 – Feb 1991)	2500.0

327

IS 7933 (1975) - Specification for flexible polyurethane foam for domestic mattresses

Specification for flexible polyurethane foam for domestic mattresses

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.8 (Density)	1000.0

328

IS 101 ( Part 3/Set 2 ) (:1989 (RA 2019)) - METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

METHODS OF SAMPLING AND TEST FOR PAINTS,VARNISHESAND RELATED PRODUCTS (PART 3: TESTS ON PAINT FILM FORMATION) (Section 2: Film Thickness)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Measurement of dry film thickness on magnetic metallic substrate by magnetic flux principle)	2000.0

329

BIS IS 2932:2013 RA 2018 (2013) - Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing - Specification :for Domestic and Decorative Applications

Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing - Specification :for Domestic and Decorative Applications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 Composition (Composition 6.1.1 Rosin and Resin derivative test IS 101 (Part 9/Sec 2)))	100.0
6.1.2 (Total Non-Volatile Content( matter including pigments, extenders and vehicles) IS 101 (Part8/Sec 2))	500.0
6.2 (Condition in Container)	100.0
6.3 (Freedom from Coarse Particles IS 101 (Part l/Sec 2))	100.0
6.4 (Skin Formation IS 101(Part 1/Sec 2).)	100.0
6.5 (Thinning Properties)	100.0
6.6 (Application Properties)	100.0
6.7 (Durability 6.7.1 Registered Sample NORMAL OUTDOOR EXPOSURE TEST ANNEX C at an angle of 45° facing south. Commence the exposure not earlier than the third week of January and not later than the first week of April. (Clauses 6.7.1 .1, 6.7.1.2, 6.7.2.2 and 8.1.1.1))	10000.0
6.7.1.2 (6.7 Durability 6.7.1.2 sample for registration C-4 Artificial weathering apparatus(Xenon ) for 700 hours)	10000.0
6.7.1.3 (Durability Accelerated weathering apparatus (QUV) for 360 hours 6.7.1.3 Lamp type : UV 313 Test cycle : UV (4 h at 60 ± 3°C) Condensation (4 h at 50 ± 3°C)Irradiance : 0.67 W/m2/nm UVB wavelength : 295 – 325 nm (Approx))	10000.0
6.8 (Lead Restriction IS 101 (Part 8/Sec 5))	500.0
6.9 Table 2 1 a) (Consistency Annexure B)	100.0
6.9 Table 2 1 b) (Viscosity by ford cup No. 4 at 27 ± 2°C IS (Part l/Sec 5) —)	100.0
6.9 Table 2 ii (Mass, in kg/10 litre IS 101 (Part l/Sec 7))	100.0
6.9 Table 2 iii a) (Drying time in hours a) Surface Dry)	100.0
6.9 Table 2 iii b) (Drying Time b) Hard Dry in hours)	100.0
6.9 Table 2 iii C) (Drying Time in hours c)Tack free)	100.0
6.9 Table 2 iv a) (Finish IS 101 (Part 3/Sec 4))	100.0
6.9 Table 2 iv b) (b) Gloss at 60 Deg Angle IS 101(Part 4/Sec 4))	100.0
6.9 Table 2 vi (Colour IS 101 (Part 4/Sec 2))	100.0
6.9 Table 2 vi a) (Flexibility and adhesion: a) Scratch hardness IS 101 (Part 5/Sec 2) cl 2)	100.0
6.9 Table 2 vii b) (b) Bend test (with 6.25 mm in type 1 apparatus) Clause 2 of IS 101 (Part 5/Sec 2))	200.0
6.9 Table 2 viii (Flash point in Deg.C IS 101 (Part l/Sec 6))	200.0
6.9 Table 2 ix a) (Composition a) Volume solids percent IS 101 (Part 8/Sec 6))	200.0
6.9 Table 2 ix b) (Composition b)Phthalic anhydride content non-volatile vehicle, percent by mass, IS 101 (Part 8/Sec 4))	200.0
6.9 Table 2 x (Resistance to acid Annexure E)	200.0
6.9 Table 2 xi) (Resistance to alkali Annexure F)	200.0
6.9 Table 2 xiii (Keeping properties For 12 Months IS 101 (Part 6/Sec 2) Not less than one year from date of manufacturing)	5000.0
6.9 Table 2 xiv (Wet opacity, m2/10 litre As per values given in clause 5 IS 101 (Part 4/Sec 1))	100.0

330

CUSTOM - Ferro Alloy

Ferro Alloy

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon)	1000.0
2 (Sulphur)	1000.0
3 (Phosphorus)	1000.0
4 (Silicon)	1000.0
5 (Chromium)	1000.0
6 (Manganese)	1000.0
7 (Aluminium, % by mass)	1200.0