| 331 |
Distilled water/Reagent water for Laboratory use (-) - Distilled water/Reagent water for Laboratory use |
Distilled water/Reagent water for Laboratory use |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Electrical Conductivity micro siemens/cm at 25 deg C) |
1000.0 |
|
| 2 (PH at 25 Deg C) |
1000.0 |
|
| 3 (Sodium in ppm) |
1000.0 |
|
| 4 (Chloride ppm) |
1000.0 |
|
|
| 332 |
IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.1 (Breaking Load of Completed Barbed Wire) |
1000.0 |
|
| 12.1 (Tensile Strength of Line Wire) |
1000.0 |
|
| 12.3 (Ductility) |
1000.0 |
|
| 12.2.1 (Zinc Coating of Line wire) |
2000.0 |
|
| 6 (Chemical composition (Carbon)) |
625.0 |
|
| 5 (Dimension/ Sizes) |
1000.0 |
|
| 9 (Freedom from Defects) |
500.0 |
|
| 6 (Chemical composition (Manganese)) |
625.0 |
|
| 6 (Chemical composition (Sulphur)) |
625.0 |
|
| 6 (Chemical composition (Phosphorus)) |
625.0 |
|
| 12.2.2 (Zinc Coating of Point wire) |
2000.0 |
|
| 12.2.2 (Adhesion of Coating of Point wire) |
1000.0 |
|
| 12.2.1 (Adhesion of Coating of Line wire) |
1000.0 |
|
|
| 333 |
CUSTOM/PP ROPE/2023 - CUSTOM/PP ROPE/2023 |
CUSTOM/PP ROPE/2023 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Dia of Rope) |
500.0 |
|
| 2.0 (Weight of Rope) |
1000.0 |
|
| 3.0 (Breaking Strength of Individual Rope) |
5000.0 |
|
| 4.0 (Size of Crate) |
1000.0 |
|
| 5.0 (Size of Mesh Opening) |
500.0 |
|
| 6.0 (Structure of Rope) |
500.0 |
|
| 7.0 (Construction of Net) |
500.0 |
|
| 8.0 (Size of Gabion) |
500.0 |
|
| 9.0 (Linear Density of Rope) |
1000.0 |
|
| 10.0 (Material of Rope) |
5000.0 |
|
| 11 (Length of Lay) |
1000.0 |
|
| 12 (Weight of Tar) |
1200.0 |
|
|
| 334 |
IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Mass of Zinc Coating, (g/m2)) |
2000.0 |
|
| 9.3 (Determination of Uniformity of Galvanizing Coating) |
1000.0 |
|
|
| 335 |
RDSO/2009/CG-03 (2016) - Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative). |
Schedule of Technical Requirements for Injection Moulded Polyacetal Protective Tube for ICF Type B.G. Main Line & EMU Trailer Coaches (Tentative). |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Specific Gravity) |
1000.0 |
|
| 5.1 (Tensile Strength) |
2000.0 |
|
| 5.1 (Elongation at Break) |
1000.0 |
|
| 5.1 (Melt Flow Rate @ 190 deg.C at 2.16 kg load) |
2000.0 |
|
|
| 336 |
IS 613 (2000) - Copper Rods and Bars for Electrical Purposes |
Copper Rods and Bars for Electrical Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4 (Resistance of a Solid Conductor) |
5000.0 |
|
| 6 (Freedom from defects) |
1000.0 |
|
| 9.1 (Tensile Strength) |
2000.0 |
|
| 9.1 (Elongation) |
1000.0 |
|
| 9 (Vickers Hardness) |
2000.0 |
|
| 9.2 (Bend Test) |
1000.0 |
|
| 10 (Dimensions) |
1000.0 |
|
| 11 (Electrical Resistivity Test) |
2000.0 |
|
| 8 (Chemical composition as given in for grades ETP, FRHC of IS 191 (Part 5) or IS 191 (Part 6) respectively.) |
5000.0 |
|
|
| 337 |
CUSTOM - Iron content in Mild Steel |
Iron content in Mild Steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Iron content) |
2000.0 |
|
|
| 338 |
ND Custom 9 (2023) - Training on Manual Metal Arc welding/ Gas Metal arc Welding |
Training on Manual Metal Arc welding/ Gas Metal arc Welding |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (One Day Training Programme on MMAW/GMAW) |
1000.0 |
|
| 2 (Two Days Training Programme on MMAW/GMAW) |
1000.0 |
|
| 3 (Three Days Training Programme on MMAW/GMAW) |
3000.0 |
|
| 4 (Four Days Training Programme on MMAW/GMAW) |
4000.0 |
|
| 5 (Five Days Training Programme on MMAW/GMAW) |
5000.0 |
|
|
| 339 |
IS 5154-Part 1- 2013 (2013) - LEAD-ACID TRACTION BATTERIES
PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST
[ Bag plate Lead Acid Secondary Battery) |
LEAD-ACID TRACTION BATTERIES
PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST
[ Bag plate Lead Acid Secondary Battery) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Capacity Test on the lines of IS 5154 - Part 1
Sample shall meets the requirements ,Ca = 0,85 CN at the first cycle;
Ca = 1,00 CN at or before the tenth cycle.
Charging Current . Specific Gravity and Cut off Voltage as per Manufacturer instruction) |
20000.0 |
|
| 6.1 (Energy Density Test) |
5000.0 |
|
|
| 340 |
CUSTOM - Fish Food |
Fish Food |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Protein content) |
2000.0 |
|
|
| 341 |
2664 - Specification for Quenching Oil |
Specification for Quenching Oil |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Acidity, Inorganic (mg of KOH per gram of oil)) |
1000.0 |
|
| 2 (Acidity, Organic (mg of KOH per gram of oil)) |
1000.0 |
|
| 3 (Ash, Percent by mass) |
1000.0 |
|
| 4 (Pour point, Dg C) |
1000.0 |
|
| 5 (Flash point, Cleveland (Open) Cup , Dg C) |
1000.0 |
|
| 6 (Kinematic Viscosity at 40 Dg C, cSt) |
1000.0 |
|
| 7 (Viscosity Index) |
1000.0 |
|
| 8 (Saponification Value) |
1000.0 |
|
| 9 (Volatility (Loss on heating at 150 dg C for two hours)) |
1000.0 |
|
| 11 (Copper strip corrosion test at 100 dg C for 3h) |
1000.0 |
|
|
| 342 |
EN 438 (2016) - High Pressure decorative laminates(HPL) - Sheets based on thermosetting resins(Usually called laminates)-Part-3 : classification and Specifications for laminates less than 2 mm thick intended for bonding to supporting substrates. |
High Pressure decorative laminates(HPL) - Sheets based on thermosetting resins(Usually called laminates)-Part-3 : classification and Specifications for laminates less than 2 mm thick intended for bonding to supporting substrates. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2.5 (Visual Inspection) |
500.0 |
|
| 6.2.5.3 (Edge Quality) |
500.0 |
|
| 6.3 (Thickness) |
1000.0 |
|
| 6.3 (Edges Straightness) |
1000.0 |
|
| 6.3 (Length) |
500.0 |
|
| 6.3 (Width) |
500.0 |
|
| 6.3 (Edges Squareness) |
1000.0 |
|
| 6.3 (Flatness) |
1000.0 |
|
| 6.4 (Resistance to Surface Wear) |
5000.0 |
|
| 6.4 (Resistance to immersion in boiling water) |
2000.0 |
|
| 6.4 (Resistance to Water Vapour) |
2000.0 |
|
| 6.4 (Resistance to dry heat(160 deg.C)) |
2000.0 |
|
| 6.4 (Dimensional stability at elevated temperature) |
2000.0 |
|
| 6.4 (Resistance to wet heat(100 deg.C)) |
2000.0 |
|
| 6.4 (Resistance to cracking under stress) |
2000.0 |
|
| 6.4 (Resistance to scratching) |
2000.0 |
|
| 6.4 (Resistance to staining) |
5000.0 |
|
| 6.4 (Light Fastness(Xenon arc)) |
3000.0 |
|
| 6.4 (Density) |
1000.0 |
|
|
| 343 |
CUSTOM-23-ER-MCALI - Calibration of Ultrasonic Thickness Gauge |
Calibration of Ultrasonic Thickness Gauge |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 344 |
CUSTOM-22-ER-MCALI - Calibration of Wheel Gauge (B.G) for thick and wear adopter profile |
Calibration of Wheel Gauge (B.G) for thick and wear adopter profile |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 345 |
CUSTOM-21-ER-MCALI - Calibration of Wheel Diameter Gauge |
Calibration of Wheel Diameter Gauge |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 346 |
CUSTOM-20-ER-MCALI - Calibration of Buffer Height Gauge |
Calibration of Buffer Height Gauge |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 347 |
CUSTOM-19-ER-MCALI - Calibration of WHEEL DISTANCE GAUGE |
Calibration of WHEEL DISTANCE GAUGE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 348 |
CUSTOM - WOODEN SAWDUST BRIQUETTE |
WOODEN SAWDUST BRIQUETTE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (ASH CONTENT) |
1000.0 |
|
| 2 (GROSS CALORIFIC VALUE) |
2000.0 |
|
| 3 (Moisture) |
1000.0 |
|
|
| 349 |
CUSTOM-18-ER-MCALI - Calibration of BORE GAUGE |
Calibration of BORE GAUGE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 0 (Length) |
1200.0 |
|
| 1 (Length) |
3000.0 |
|
|
| 350 |
CUSTOM-17-ER-MCALI - Calibration of COUNTER LIMIT GAUGE NO.2 |
Calibration of COUNTER LIMIT GAUGE NO.2 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 351 |
CUSTOM-16-ER-MCALI - Calibration of COUNTER LIMIT GAUGE NO.1 |
Calibration of COUNTER LIMIT GAUGE NO.1 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 352 |
CUSTOM-15-ER-MCALI - Calibration of KNOCKLE NOSE WEAR STRETCH LIMIT GAUGE |
Calibration of KNOCKLE NOSE WEAR STRETCH LIMIT GAUGE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 353 |
CUSTOM-14-ER-MCALI - Calibration of MECHANICAL DIAL FLANGE WEAR GAUGE FOR BG LOCO |
Calibration of MECHANICAL DIAL FLANGE WEAR GAUGE FOR BG LOCO |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
1200.0 |
|
|
| 354 |
CUSTOM-13-ER-MCALI - Calibration of MECHANICAL DIAL ROOT WEAR GAUGE FOR BG LOCO |
Calibration of MECHANICAL DIAL ROOT WEAR GAUGE FOR BG LOCO |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Dimension) |
1200.0 |
|
|
| 355 |
CUSTOM - CAST IRON |
CAST IRON |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Cadmium) |
1200.0 |
|
| 2 (Lead) |
1200.0 |
|
| 3 (Mercury) |
1200.0 |
|
| 4 (Chromium) |
1200.0 |
|
| 5 (Carbon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 7 (Silicon) |
1500.0 |
|
| 5 (Carbon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 7 (Silicon) |
1500.0 |
|
| 5 (Carbon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 7 (Silicon) |
1500.0 |
|
| 5 (Carbon) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
|
| 356 |
Salt spray test for 500 hours ASTM B 117 (0) - Salt spray test for 500 hours
ASTM B 117 |
Salt spray test for 500 hours
ASTM B 117 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Salt spray test for 500 hours ASTM B 117) |
25000.0 |
|
|
| 357 |
Custom ASTM - Non Shrinking Grouts / Mortar - Method of Test ASTM |
Non Shrinking Grouts / Mortar - Method of Test ASTM |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASTM C 109 (Test for Compressive Strength (28 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 109 (Test for Compressive Strength (1 Day Compressive Strength), N/mm^2) |
4000.0 |
|
| ASTM C 109 (Test for Compressive Strength (3 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
| ASTM C 109 (Test for Compressive Strength (7 Day Compressive Strength), N/mm^2 [ASTM C 109]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (7 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 348 (Test for Flexural Strength (28 Day Flexural Strength), N/mm^2 [ASTM C 348]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (7 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 307 (Test for Tensile Strength (28 Day Tensile Strength), N/mm^2 [ASTM C 307]) |
4000.0 |
|
| ASTM C 1585-04 (Rate of Absorption of Water (single duration on the lines of ASTM C 1585:2004)) |
2000.0 |
|
|
| 358 |
ASTM C348 (2021) - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars |
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Flexural strength) |
4000.0 |
|
|
| 359 |
ASTM C 307 (2003) - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Surfacing |
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Surfacing |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Tensile Strength) |
4000.0 |
|
|
| 360 |
ASTM C 109 (1995) - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars |
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (compressive strength) |
4000.0 |
|
|
