NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

511

IRS T-57-2020 (2020) - POLYETHYLENE DOWELS FOR CONCRETE SLEEPER.

POLYETHYLENE DOWELS FOR CONCRETE SLEEPER.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Identification of Polymer)	5000.0
4.1.2 (Melt Flow Index)	2000.0
4.1.2 (Crystaline Melting Point)	1000.0
4.1.2 (Density)	1000.0
4.1.2 (Ash Content)	2000.0
4.1.2 (Hardness(Shore D))	1000.0
4.1.2 (Tensile Strength)	2000.0
4.1.2 (Elongation at break)	1000.0
Firm's request. (Dimension)	1000.0

512

CUSTOM/TEXTILE CONVEYOR BELT JOINT EFFICIENCY TEST/2022 - CUSTOM/TEXTILE CONVEYOR BELT JOINT EFFICIENCY TEST/2022

CUSTOM/TEXTILE CONVEYOR BELT JOINT EFFICIENCY TEST/2022

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's request. (Splice Efficiency Test(Breaking Strength))	15000.0
Firm's request. (Top Cover Hardness(Shore A))	1000.0
Firm's request. (Bottom Cover Hardness(Shore A))	1000.0

513

NTH- Grounding Resister (2023) - Neutral Grounding Resister

Neutral Grounding Resister

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Insulation Resistance 500V DC & High Voltage Test at 1kV AC)	2500.0
1.2 (IP 3X,Protected against solid foreign objects, As per IEC 60529 , Clause No. 13.2)	7500.0
1.3 (IP X1,Protection against Vertically Falling Water Drop as per IEC 60529:2001, Clause No.,14.2.1)	7500.0
1.4 (As per customer requirements)	3000.0
1.5 (Final Measurement of IR & High Voltage Test as per customer specification.)	2500.0
1.6 (IP-X3 ( Ingress Protection) as per IS /IEC 60529 : 2001, Clause 14.2.3)	7500.0
1.7 (IP-X4: As per IS/IEC 60529:2001,Clause 14.2.4)	7500.0

514

IS 17077 : Part 1 (2022) - Plastics - AcrylonitrileButadienestyrene (Abs) moulding and extrusion materials: Part 1 designation system and basis for specifications

Plastics - AcrylonitrileButadienestyrene (Abs) moulding and extrusion materials: Part 1 designation system and basis for specifications

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Vicat Softening Temprature)	1500.0
6.2 (Melt Mass Flow Rate)	2000.0
6.3 (Charpy Notched Impact Strength)	2000.0
6.4 (Tensile Modulus)	2000.0
6.5.1.2 (Overall Migration)	3000.0

515

IS 8887 (2018) - Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2&6.2 xi (Water content)	1200.0
4.2&6.2 x 5 (Residue at 360°)	1200.0
4.2&6.2 ix 4 (Tests on residue: Solubility I tricholoethylene,)	1200.0
4.2&6.2 ix 2 (Tests on residue: Penetration 25dg/100g/5sec)	1200.0
4.2&6.2 ix 1 (Tests on residue: Residue by evaporation)	1200.0
4.2&6.2 viii (Miscibility with water)	1200.0
4.2&6.2 iv (Storage stability after 24 hr)	1200.0
4.2&6.2 v (Particle charge)	1500.0
4.2&6.2 ii 2 (Viscocity by saybolt furol viscometer 50 dg)	1200.0
4.2&6.2 ii 1 (Viscocity by saybolt furol viscometer 25 dg)	1200.0
4.2&6.2 i (Residue on 600 micron IS seive)	1200.0

516

ASTM D149-20 - Standard test method for Dielectric breakdown voltage & Dielectric strength of solid Electrical insulating materials at commercial power frequencies

Standard test method for Dielectric breakdown voltage & Dielectric strength of solid Electrical insulating materials at commercial power frequencies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12 (Dielectric Strength)	10000.0

517

CUSTOM/POLYCARBONATE SEAL & SS WIRE/2022 - POLYCARBONATE SEAL & SS WIRE(AISI GRADE - 316).

POLYCARBONATE SEAL & SS WIRE(AISI GRADE - 316).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's request. (Effect of Hydrochloric Acid(Conc.) (Kept for 2-hours).)	1000.0
Firm's request. (Effect of Mineral Oil (Kept for 2-hours).)	1000.0
Firm's request. (Effect of Vegetable Oil (Kept for 2-hours).)	1000.0
Firm's request. (Effect of Alcohol(Ethyl) (Kept for 2-hours).)	1000.0
Firm's request. (Effect of Sodium Hydroxide(10% W/V) (Kept for 2 hours))	1000.0
Firm's request. (Effect of Potassium Hydroxide(10%W/V) (Kept for 2-hours).)	1000.0
Firm's request. (Boiling water Test for 4- hours)	1000.0
Firm's request. (Muriatic Acid Test (Kept for 2-hours).)	1000.0
Firm's request. (Petrol Test (Kept for 2 hours))	1000.0
Firm's request. (Thinner Test ( Kept for 2 Hours))	1000.0
Firm's request. (Kerosene Test)	1000.0
Firm's request. (Heat Resistance Test at 148 deg.C for 2 hours.)	1000.0
Firm's request. (Specific Gravity Test)	1000.0
Firm's request. (Identification of Base Polymer)	4000.0
Firm's request. (Melting Point)	1000.0
Firm's request. (UV Resistance Test(100 hrs))	4000.0
Firm's request. (Breaking Strength of Seal Wire(AISI-316 GRADE))	1000.0
Firms request (Chemical Composition Grade 316 (C, Mn, Si, Cr, Ni, P, S, Mo))	4000.0
Firm's request (Resistance to Salt Spray (For 100 Hours).)	4000.0
Firm's request (Tamper Proof Test (Pull out test).)	1000.0
Firm's request (Tensile Test (Pull out Test) Male and Female Opening.)	1000.0
Firm's request (Tensile Test (Pull out Test) Opening of wire from seal.)	1000.0
Firm's request. (Width of Female part(Top).)	500.0
Firm's request. (Height of Female part.)	500.0
Firm's request. (Depth of Female part.)	500.0

518

Custom - EN rod DIN1651

EN rod DIN1651

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon)	1200.0
2 (Manganese)	1200.0
3 (Sulphur)	1200.0
4 (Phosphorus)	1200.0
5 (Silicon)	1200.0
6 (Lead)	1200.0

519

IS 13515 (1992 RA 2018) - RUST CONVERTERS

RUST CONVERTERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Application)	500.0
3.3 (Drying)	500.0
3.4 (Application of an Organic Coating)	500.0
4.2.1 (Drying Time)	500.0
4.2.2 (Acid Leach Test)	500.0
4.2.2.1 (pH of the solution after Acid Leach Test)	500.0
4.2.3 (Adhesion Test)	500.0
4.2.4 (Scratch Test 1 000 gm weight)	500.0
4.2.5 (Resistance to Temperature at 75 and 80°C for 60 minutes)	500.0
42.6 (Immersion Test(in distilled water at room temperature for 30 days.)	1000.0
4.2.7 (Salt Spray Test for 30 days (3 % sodium chloride salt spray test ))	15000.0

520

MORTH 5th Revision table 900-4/IRC:111-2009 - Dense bituminous macadam/bituminous concrete-Specification for dense graded bitumen mixes

Dense bituminous macadam/bituminous concrete-Specification for dense graded bitumen mixes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
505.3.5 (Density(ASTM-D2726))	2000.0
505.3.5 (GMM(ASTM-D2041))	3000.0
505.3.5 (Compaction in %(ASTM-D2041))	5000.0
505.3.5 (Binder content(ASTM-D 2172))	5000.0

521

MORTH-5th revision 2013 -Wet Mix Macadam Sub-base/base - Specifications for Road and Bridge Works

Specifications for Road and Bridge Works

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
406.2.1.1 (Water absorption)	1000.0
406.2.1.1 (Soundness)	2000.0
406.2.1.1 Table 400.12.1 (Los Angeles Abrasion value)	1500.0
406.2.1.1 Table 400.12.1 (Aggregate Impact value)	1500.0
406.2.1.1 Table 400.12.2 (Combined Flakiness and Elongation Indices (Total))	3000.0
406.2.1.2 Table 400.13 (Grading Requirements of Aggregates for Wet Mix Macadam)	5000.0
406.2.1.2 (Plasticity Index (PI))	1000.0
406.2.1.2 (Liquid Limit)	1000.0
406.2.1.2 (Plastic Limit)	1000.0

522

ISKCON Sri Mayapur Chandrodya Mandir TOVP ISKCON (2023) - ISKCON Sri Mayapur Chandrodya Mandir TOVP ISKCON

ISKCON Sri Mayapur Chandrodya Mandir TOVP ISKCON

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Durability Test- Accelerated Weathering Test (QUV 4 hours and 4 hours condensation alternatively, Temp. 50°C, 500 hours))	24000.0
2 (Gloss Value at 60 deg&45 deg angle a)Before Exposure b) after exposure c)Gloss retention %)	1000.0
3 (Resistance to salt spray(5% Nacl Solution) 500 hours ASTM B 117)	25000.0

523

IS 516 (Part 1/Sec 1) : 2021 (3 set CC cubes) - Hardened Concrete —Methods of Test (Part 1 Testing of Strength of Hardened Concrete) (Section 1 Compressive, Flexural and Split Tensile Strength)

Hardened Concrete —Methods of Test (Part 1 Testing of Strength of Hardened Concrete) (Section 1 Compressive, Flexural and Split Tensile Strength)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Compressive strength,MPa)	3600.0

524

2386 (WMM) (1963) - Wet Mix Macadum

Wet Mix Macadum

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

525

MORTH-5th Revision 2013 Sub Base, Bases (Non Bituminous) - Specifications for Road and Bridge Works

Specifications for Road and Bridge Works

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Section 400 of MoRTH GSB/WBM/WMM/Screening/CRM etc. (Table 400-1/9/10/13/14 etc.). (Grading(as per Table 400 section of Morth 5th revision))	5000.0
401.2.2 (Water absorption)	1000.0
Section 400 of MoRTH GSB/WBM/WMM/CRM etc. (Table 400-2/8/1215 etc.). (Aggregate Impact value)	1500.0
Section 400 of MoRTH GSB/CRM etc. (Table 400-2/15 etc.). (Liquid limit)	1000.0
Section 400 of MoRTH GSB/CRM etc. (Table 400-2/15 etc.). (Plasticity Index)	2000.0
401.2.2 Table 400.2 (CBR)	6000.0

526

NTH/ER/CHEM/CUST-02 BS 476 ASTM E 119 (22) - AS PER CUSTOMER REQUIRMENTS FIRE RESISTANCE TEST

AS PER CUSTOMER REQUIRMENTS FIRE RESISTANCE TEST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Fire Resistance Test: 1.Stability)	2000.0
2 (Fire Resistance Test: 2.Integrity)	2000.0
3 (Fire Resistance Test:3. Insulation)	1000.0
4 (Fire Resistance Test:4 Fire resistance Properties)	2000.0
5 (Fire Resistance Test:5 Self –Extinguished Properties)	2000.0
6 (Fire Resistance Test: 6 Peel Off after 120 /240 min Fire test)	1000.0

527

NTH/NR/CHEM/CUST-02 ASTME 119/BS 476 (As per Pt: 20 and 24) - As per Customer Requirement

As per Customer Requirement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

528

Custom - Kiln Bricks / Fused Alumina

Kiln Bricks / Fused Alumina

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Fe2O3, Percent by mass)	2000.0
2 (Al2O3, Percent by mass)	2000.0

529

CUSTOM/EAR TAG/2022 (2022) - CUSTOM/EAR TAG/2022

CUSTOM/EAR TAG/2022

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Pull Test Force)	2000.0
2.0 (Material Identification)	5000.0
3.0 (Weight of Male BTM and Female Tag)	2000.0
4.0 (Dimension of Tag(Male & female))	1000.0

530

NTHER-Calibration of Digital DC Power Supply - NTHER-Calibration of Digital DC Power Supply

NTHER-Calibration of Digital DC Power Supply

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Calibration of Digital DC Power Supply upto 100V,150A)	5000.0
A2 (Calibration of Digital DC Power Supply upto 100V,20A)	2500.0
A3 (Calibration of Digital DC Power Supply upto 50V,40A)	3500.0
A4 (Calibration of Digital DC Power Supply upto 40V,25A)	3000.0

531

NTHER-Calibration of Programmable DC Electronics Load - NTHER-Calibration of Programmable DC Electronics Load

NTHER-Calibration of Programmable DC Electronics Load

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (NTHER-Calibration of Programmable DC Electronics Load)	4000.0

532

NTHER-Calibration of Data Acquisition Chart Recorder - NTHER-Calibration of Data Acquisition Chart Recorder

NTHER-Calibration of Data Acquisition Chart Recorder

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (NTHER-Calibration of Data Acquisition Chart Recorder (32 Channel))	5000.0
A2 (NTHER-Calibration of Data Acquisition Chart Recorder (16 Channel))	4000.0
A3 (NTHER-Calibration of Data Acquisition Chart Recorder (8 Channel))	3000.0

533

IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.5 (Carbon (C))	500.0
7.5 (Manganese (Mn))	500.0
11.2 (Phosphorus (P))	500.0
7.5 (Sulphur (S))	500.0
7.5 (Silicon (Si))	500.0
11.4 (Tensile Strength)	2000.0
11.4 (% Elongation)	1000.0
11.5 (Brinell Hardness)	2000.0
11.6 (Microstructure)	3000.0
13 (Weight)	1000.0
11.2 (Tin (Sn))	500.0
11.2 (Copper (Cu))	500.0

534

IRS T-46 (1996) - Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts

Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

535

ISO 683-17 (2014) - Heat-treated steels, alloy steels and free-cutting steels —Ball and roller bearing steels

Heat-treated steels, alloy steels and free-cutting steels —Ball and roller bearing steels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1.2 (Carbon)	500.0
7.1.2 (Silicon)	500.0
7.1.2 (Manganese)	500.0
7.1.2 (Phosphorus)	500.0
7.1.2 (Sulphur)	500.0
7.1.2 (Chromium)	500.0
7.1.2 (Molybdenum)	500.0
7.1.2 (Copper)	500.0
7.1.2 (Aluminium)	500.0
7.1.2 (Nickel)	500.0
7.1.2 (Vanadium)	500.0
7.1.2 (Lead)	500.0
7.1.4 (Hardness)	2000.0
7.5.1 (Visual Inspection)	1000.0

536

RCF Spec. No. EDTS-163,Rev. C - RCF Spec. No. EDTS-163,Rev. C

RCF Spec. No. EDTS-163,Rev. C

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4.c (IP Protection Test)	15000.0
7.4.f (Vibration and shock test)	70000.0
7.4.f (Impact Test)	15000.0

537

NTHER-Calibration of HV Probe - NTHER-Calibration of HV Probe

NTHER-Calibration of HV Probe

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (NTHER-Calibration of HV Probe upto 40 kV)	4000.0
A2 (NTHER-Calibration of HV Probe upto 80 kV)	7000.0

538

Custom: Bright bar

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon % by mass)	1200.0
2 (Silicon % by mass)	1200.0
3 (Manganese % by mass)	1200.0
4 (Sulphur % by mass)	1200.0
5 (Phosphorus % by mass)	1200.0
6 (Lead % by mass)	1200.0

539

AWWA C210-15 (2015) - Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal

Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 Prequalification Requirements a) (Immersion and vapour resistance test for 30 days in: 1. Deionized Water (ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1--ASTM D 6943))	3000.0
Table 1 Prequalification Requirements b) (Immersion and vapour resistance test for 30 days in: 2. Sulphuric Acid,1% by weight ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943)	3000.0
Table 1 Prequalification Requirements c) (Immersion and vapour resistance test for 30 days in: 3.Sodium Hydroxide, 1% by weight ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943)	3000.0
Table 1 2 Prequalification Requirements (Cathodic disbondment test, 28 days, -1.5V AWWA C 210 Clause No. 5.2.1.2 /*ASTM G 8)	5000.0
Table 1 3.Prequalification Requirements (Dielectric Strength AWWA C 210-2015 Clause No. 5.2.1.3/ASTM D 149)	10000.0
Quality Control Requirements Table 2 1 (Appearance AWWA C 210-2015 Clause No. 5.5.1)	100.0
Quality Control Requirements .2 Table 2 (Cure test AWWA C 210-2015 Clause No. 5.5.2/ASTM D 5402)	1000.0
Quality Control Requirements 3 Table 2 (Dry Film Thickness AWWA C 210-2015 Clause No. 5.5.3)	1000.0
Quality Control Requirements 4 Table 2 (Adhesion to steel (Pull Adhesion to steel (Pull Off Adhesion test) ASTM D 4541)	5000.0
Quality Control Requirements 5. Table 2 (Electrical Continuity Inspection / (Pin-hole detector @ 2.5 KV))	5000.0
Quality Control Requirements (Abrasion resistance - 'Abrasion resistance of organic coatings by the Taber Abraser" - 1 kg load / 1000 cycles CS 17 wheel or CS 10 wheel ASTM D4060)	5000.0
Quality Control Requirements (Shore D hardness "ASTM D2240 ")	1200.0
Quality Control Requirements (Compressive Strength "ASTM C109 ")	5000.0
ADD PARAMETER 1 (Potable Water Service test a)PH on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test b)Turbidity on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test d)Chloride on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test c)Total hardness on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test e)Nitrate on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test f)Iron on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test g)Arsenic on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test h)Fluoride on the lines of IS 10500)	1000.0
1.1 (Specific Gravity (after Mixing Comp A+ Comp B))	1000.0
additional parameter (Abrasion Resistance 1560Cycle/mill as per ASTM D4060)	5000.0
additional parameter (Adhesion to steel)	1200.0

540

AAI BAGDOGRA AIRPORT SPECIFICATION (2023) - AAI BAGDOGRA AIRPORT SPECIFICATION

AAI BAGDOGRA AIRPORT SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Thickness of ACP)	1000.0
A (Thickness of Aluminium Coil)	1000.0
B (Tensile Strength)	1000.0
B (Yield Strength)	1000.0
B (Elongation)	1000.0
F (Bend Test)	2000.0
C Paint Performance 1 (Specular gloss 60 degree angle ASTM 523/4214)	1000.0
C PAINT Performance 2 (Thickness of coating in microns)	1000.0
C PAINT Performance 3 (Pencil Hardness test(11 ,11 B) ASTM 3363)	1000.0
C PAINT Performance 4 (Impact Resistance ASTM D 2794)	2000.0
D FIRE RESISTING BEHAVIOUR 3 (Surface Spread of Flame (BS 476 Part VII))	5000.0
E chemical &aging test 1 (chemical & Aging Test 1)Weathering & Conditioning test(ASTM D 2247) for 24 Hours)	2000.0
E chemical &aging test 2 (chemical & Aging Test Salt Spray test for 500 hours(ISO 9227))	20000.0
E chemical &aging test 2 (chemical & Aging Test Salt Spray test for 3000 hours(ISO 9227))	100000.0
E chemical &aging test 3 (Resistance to 5%(V/V)Hydrochloric acid solution for 24 hours)	1000.0
E chemical &aging test 3 (Resistance to 5%(V/V)H2SO4 acid solution for 24 hours)	1000.0