NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

841

IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386]

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Size and Grading of Aggregates-Sieve Analysis)	2000.0
5.6 (Alkali aggregate reactivity, m.mol/lit.)	3000.0
5.5 (Soundness)	2000.0
5.2 (Deleterious materials)	2000.0
5.4.3 (Abrasion Value, %)	1500.0
5.4.2 (Impact Value, %)	1500.0
5.4.1 (Crushing Value/Ten percent)	1500.0
5.3 (Combined Elongation Index and Flakiness Index)	3000.0
5.7 (Specific gravity)	500.0
5.7 (Water absorption)	1000.0
5.5 (Soundness)	2000.0
5.5 (Soundness)	2000.0

842

IS 25 (1979 RA 2021) - SPECIFICATION FOR ANTI FRICTION BEARING ALLOYS

SPECIFICATION FOR ANTI FRICTION BEARING ALLOYS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1 (Tin % by mass)	1000.0
3.1.2 (Antimony % by mass)	1000.0
3.1.3 (Lead % by mass)	1000.0
3.1.4 (Copper % by mass)	1000.0
3.1.5 (Iron % by mass)	1000.0
3.1.6 (Arsenic % by mass)	1000.0
3.1.7 (Aluminium % by mass)	1000.0
3.1.8 (Bismuth % by mass)	1000.0
3.1.9 (Zinc % by mass)	1000.0
3.1.10 (Cadmium % by mass)	1000.0

843

Counter Meter with Metal Wheel - Calibration of Counter Meter with Metal Wheel

Calibration of Counter Meter with Metal Wheel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension)	7000.0

844

Elect-Safety on footwear IS 15298 Part 2 : 2011 (2011) - Personnel Protective Equipment . Part 2, Safety Footwear

Personnel Protective Equipment . Part 2, Safety Footwear

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3.3 of EN 50321-1999 read with IS 15298 Part 2 (Proof Voltage Test [5 kV (rms) applied for 3 minutes] as per EN 50321-1999)	10000.0
6.3.4 as per EN 50321-1999 read with IS -15298-2 (Withstand Voltage Test, 10 kV (rms) clause 6.3.4 as per EN 50321-1999 read with IS -15298-2)	10000.0

845

ASTM 106 (2010) - Standard specification for Seamless Carbon Steel Pipe for high temperature service

Standard specification for Seamless Carbon Steel Pipe for high temperature service

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

846

NFC 33 020-1998 (1998) - Insulated cables & their accessories for power systems- Insulation piercing branch connectors for overhead distribution and services with bundle assembled cores, of rated voltage 0.6/1 kV

Insulated cables & their accessories for power systems- Insulation piercing branch connectors for overhead distribution and services with bundle assembled cores, of rated voltage 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.5 (Installation Test at low temperature)	11000.0
2.6 (Climatic ageing Test)	66000.0
- (Drawing Verification)	3000.0

847

IS 1110 (1990 RA 2019) - FERROSILICON - SPECIFICATION

FERROSILICON - SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2.1 (Silicon Content % by mass)	2000.0
7.2.2 (Carbon content % by mass)	2000.0
7.2.3 (Sulphur Content % by mass)	2000.0
7.2.4 (Phosphorous Content % by mass)	2000.0
7.2.5 (Aluminium Content % by mass)	2000.0
7.2.6 (Calcium content percent by mass)	2000.0

848

IS 1559 part 2 (1982) - Methods of chemical analysis of ferro silicon: Part 2 Determination of carbon

Methods of chemical analysis of ferro silicon: Part 2 Determination of carbon

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (carbon content % by mass)	1200.0

849

IS 1559 part 5 (2003) - Methods of chemical analysis of ferro silicon Determination of Aluminium (Aluminium 0.05 to 1.75 Percent)

Methods of chemical analysis of ferro silicon Determination of Aluminium (Aluminium 0.05 to 1.75 Percent)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Aluminium content % by mass)	1200.0

850

IS 1559 part 1 (1988) - Methods of chemical analysis of ferro silicon Determination of Silicon Gravimetric Method

Methods of chemical analysis of ferro silicon Determination of Silicon Gravimetric Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Silicon content % by mass)	2000.0

851

ASME Sec V, SE 797 (2019) - Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (Thickness Measurement by Ultrasonic Pulse-Echo Contact Method)	2000.0

852

IRS Spec.No. R-64/98(Rev.2) (1998) - Rubber washer

Rubber washer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2.1 (Tensile Strength)	1000.0
6.2.2 (Elongation at Break)	1000.0
6.2.3. (Compression set)	2000.0
6.2.4 (Hardness)	1000.0
6.2.6(i) (Hardness(Ageing))	1000.0
6.2.6(ii) (Tensile Strength(Ageing))	2000.0
6.2.6(iii) (Elongation at Break(Ageing))	5.0
6.2.7 (Swelling/Oil absorption test)	1000.0
6.2.5 (Ash Content)	2.0

853

ISO 340 (2022) - Conveyor Belt

Conveyor Belt

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Flammability characteristics with cover)	4000.0
4.0 (Flammability characteristics without cover)	4000.0

854

NFC 33 040-2013 - Insulated Cable & their Accessories for Power System

Insulated Cable & their Accessories for Power System

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.7 (Corrosion test)	60000.0

855

IS 13871 (2021) - Powder Coating

Powder Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension)	500.0
9.1 (Measurement of Thickness on non ferrous base: Dry film Thickness)	2000.0
9.1 (Measurement of Thickness on ferrous base: Dry film thickness)	2000.0

856

ASTM B117 - Salt spray for 3000 hrs ASTM B117

Salt spray for 3000 hrs ASTM B117

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM B 117 (Salt Fog Test 5% Nacl solution(for 96 hrs) ASTM 117B/IEC 60512-11-6 AS PER CLAUSE NO. 7.4.9 FOR INTER VEHICULAR COUPLER UNIT 500AMP AS PER RDSO SPEC. NO. RDSO/PE/SPEC/AC/0177-(REV-01)-2013)	5000.0
ASTM B 117 (Salt spray test 3000hrs)	150000.0

857

IS 1868 (1996 Reaffirmed In : 2021) - Anodic coatings on aluminium and its alloys - Specification (Third Revision)

Anodic coatings on aluminium and its alloys - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Eddy Current Method) (Measurement of Thickness (Eddy Current Method))	2000.0
9.2 (Microsection method) (Measurement of Thickness (Microsection method))	2000.0

858

IS 2508 (2016) - Low Density Polyethylene Films

Low Density Polyethylene Films

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.4 (Density at 27 deg C)	1000.0
5.2 (Nominal thickness)	1000.0
5.1.1 (Colour,Texture,Finish)	1000.0
5.1.2 (Film form)	1000.0
5.1.3 (Odour)	1000.0
5.1.5 (MFI at 190 deg, 2.16 kg)	2000.0
5.1.6(b) (Ash Content)	1000.0
5.1.6(c) (Dispersion of carbon black)	1000.0
5.2 (Nominal Width tolerance for 6000-9000 mm, 9000-12000 mm, 12000-15000 mm)	1000.0
5.2 (Nominal thickness)	1000.0
6.1(i)a (Tensile Strength at Break (MD))	1000.0
6.1(i)b (Tensile Strength at break(CD))	1000.0
6.1(ii) (Ageing test at 70 (+/-) 1 deg C for 7 days)	3000.0
6.1(iii)a (Elongation at Break(MD))	1000.0
6.1(iii)b (Elongation at break(CD))	1000.0
6.1(v)a (Tear strength(MD))	2000.0
6.1(v)b (Tear strength(CD))	1000.0
6.1(iv) (Dart impact strength)	2000.0

859

Dynamometer (1000kg) - Calibration of Dynamometer (1000kg)

Calibration of Dynamometer (1000kg)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	10000.0

860

IS 8504 : Part 4 (2013) - Electrical insulating materials - Thermal endurance properties: Part 4 instructions for calculating thermal endurance characteristics (First Revision)

Electrical insulating materials - Thermal endurance properties: Part 4 instructions for calculating thermal endurance characteristics (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

861

Dynamometer (2000kg) - Calibration of Dynamometer (2000kg)

Calibration of Dynamometer (2000kg)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	12000.0

862

IS 1828: Part 1 (2022) - METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Force)	10000.0
6 (Force)	13000.0
6 (Force)	20000.0
6 (Force)	6000.0
6 (Force)	7000.0
6 (Force)	8000.0
6 (Force)	9000.0
6 (Force)	7000.0
6 (Force)	13000.0
6 (Force)	7000.0
6 (Force)	2000.0
6 (Force)	2000.0
0 (Rate of separation of the jaws, mm/minute)	2000.0

863

IS 3624 (1987) - Specification for pressure and vacuum gauges (Second Revision)

Specification for pressure and vacuum gauges (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Pressure)	3000.0
14 (Pressure)	1200.0
14 (Pressure)	3000.0

864

MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
803.4.1.2 (Colour)	1200.0
803.4.1.2 (Drying Time)	1200.0
803.4.1.2 (Cracking Resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Flow resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Softening point (BS 3262 (Part 1)) ASTM D 36)	1200.0
803.4.1.2 (Titanium Dioxide, as TiO2 % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Luminance (White) (Daylight luminance at 45 degrees))	1200.0
803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Glass Bead content % (BS 3262 (Part 1)))	1200.0
803.4.2.3 (Free flowing properties)	900.0
803.4.2.3 (Roundness)	1000.0
803.4.2.3 (Appearance)	100.0
803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088))	1000.0
803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088))	750.0

865

BS 3262(Part -1)1989 (1989) - Hot Applied Thermoplastic Road Marking Material

Hot Applied Thermoplastic Road Marking Material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Hot Applied Thermoplastic road Marking Material (Colour)	1000.0
Hot Applied Thermoplastic road Marking Material (Cracking resistance at low temperature on application to concrete Block)	1200.0
Hot Applied Thermoplastic road Marking Material (Drying time)	1000.0
Hot Applied Thermoplastic road Marking Material (Softening point)	1200.0
Hot Applied Thermoplastic road Marking Material (Flow Resistance)	1200.0
Hot Applied Thermoplastic road Marking Material (Solid Glass Bead content % by mass of total mixture)	1700.0
Hot Applied Thermoplastic road Marking Material (Luminance)	1500.0
Hot Applied Thermoplastic road Marking Material (Pigment as Titanium Dioxide (TiO2) % by mass of total mixture)	2000.0
Hot Applied Thermoplastic road Marking Material (Aggergate together with pigment ,Extender and solid Glass beads % by mass of total mixture)	2200.0
Hot Applied Thermoplastic Road Marking Material (Binder Content (Resin and Oil), % by mass of total mixture)	2000.0

866

IS 1785 : Part 1 (1983) - Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dimension)	1000.0
6.1 (Tensile Strength)	1000.0
6.2 (Proof Stress)	1000.0
6.4 (% Elongation)	1000.0
7.5 (Reverse Bend test)	1000.0
3 (Chemical Analysis)	2500.0

867

IS 1161 (2014) - Steel Tube for Structural Purposes

Steel Tube for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Outside Diameter)	500.0
6.1 (Thickness)	500.0
6.1 (Weight)	1000.0
7 (Workmanship)	1000.0
9 (Straightness)	1000.0
11.2 (Tensile Strength, MPa)	1000.0
11.2 (Yield strength, MPa)	1000.0
11.2 (Percent Elongation, %)	1000.0
11.3 (Bend Test / Flattening test)	1000.0
5 (Carbon)	500.0
5 (Sulphur)	500.0
5 (Phosphorus)	500.0
5 (Manganese)	500.0

868

Custom - Berger QUV test - QUV test of Paint and Coating

QUV test of Paint and Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-1 (UV exposure for 500 hrs)	25000.0
A-2 (Salt spry for 96 hrs)	5000.0

869

13683 (2006) - Ring Spun Grey Cotton Yarn

Ring Spun Grey Cotton Yarn

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Count Of Yarn)	-
4.1(ii) (CSP)	2000.0

870

IS 2386 : Part 3 (1963) - Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Bulking of fine Aggregate)	1000.0
5 (Surface Moisture)	500.0
3 (Compacted Bulk Density)	500.0
3 (Loose Bulk Density)	500.0
2 (Water Absorption)	1000.0
2 (Speciﬁc Gravity)	500.0