NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

811

ANSI/UL 94-2015 (2015) - Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances

Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 8.1 (After flame time for each individual specimen)	1500.0
Table 8.1 (Total after flame time for any condition set (For five specimen))	1500.0
Table 8.1 (After flame plus afterglow time for each individual specimen)	1500.0
Table 8.1 (After flame or afterglow for any specimen upto the holding clamp)	1500.0
Table 8.1 (Cotton indicator ignited by flaming particle or drops)	1500.0

812

ISO 4624 (2016) - Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Pull-off test for adhesion

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Pull Off Test)	5000.0

813

IS 15658 (2021) - Concrete Paving Blocks - Specification ( First Revision )

Concrete Paving Blocks - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Dry condition)-IS 15658:2021, Annex E)	4000.0
7.3, , Table 3, Sl No (v) (Flexural strength-IS 15658:2021, Annex G)	4000.0
7.3, Table 3, Sl No (i) (Water Absorption-IS 15658:2021, Annex C)	1000.0
7.3, Table 3, Sl No (ii) (Compressive Strength-IS 15658:2021, Annex D)	4000.0
7.2, Table2 (Dimensions & Tolerances-IS 15658:2021, Annex B)	3000.0
7.1 (General quality & Finish-IS 15658:2021)	1000.0

814

NTHER Calibration of noncontact type temperature indicator - Calibration of noncontact type temperature indicator

Calibration of noncontact type temperature indicator

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Temperature)	1000.0
A.2 (Temperature)	1500.0
A.3 (Temperature)	2000.0
A.4 (Temperature)	2500.0

815

NTHER Calibration of Insulation Tester - Calibration of Insulation Tester

Calibration of Insulation Tester

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Insulation Resistance - Voltage Range-100V)	1000.0
A.2 (Insulation Resistance - Voltage Range-500V)	1200.0
A.3 (Insulation Resistance - Voltage Range-1000V)	1500.0
A.4 (Insulation Resistance - Voltage Range-2500V)	2000.0
A.5 (Insulation Resistance - Voltage Range-5000V)	2500.0

816

NTHER Calibration of Power Factor meter - Calibration of Power Factor meter

Calibration of Power Factor meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Power Factor (pf))	1200.0

817

NTHER Calibration of frequency meter - Calibration of frequency

Calibration of frequency

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Frequency up to 1kHz)	1000.0
A.2 (Frequency up to 1MHz)	1500.0
A.3 (Frequency up to 100 MHz)	2000.0
A.4 (Frequency up to 300 MHz)	2500.0
A.5 (Frequency up to 3 GHz)	3500.0

818

NTHER Calibration of decade Resistance - Calibration of decade Resistance

Calibration of decade Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Resistance up to 1GigaOhm)	2500.0
A.2 (Resistance up to 20 Giga Ohm)	3500.0
A.3 (Resistance up to 1 Tera Ohm)	4500.0

819

NTHER -Calibration of Standard dc Resistance (Fixed point) - dc Resistance

dc Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (dc Resistance)	2000.0
A.2 (dc Resistance)	1200.0
A.3 (ac Resistance)	3000.0

820

NTHER Calibration of Analog Ammeter - Calibration of Analog Ammeter

Calibration of Analog Ammeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Current)	1200.0
A.2 (dc current)	1200.0

821

NTHER Calibration of Digital Ammeter - Calibration of Digital Ammeter

Calibration of Digital Ammeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Current)	1200.0
A.2 (dc Current)	1200.0

822

NTHER -Calibration of Analog AC/DC Volt metert - Calibration of Analog AC/DC Volt meter

Calibration of Analog AC/DC Volt meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Voltage)	1200.0
A.2 (DC Voltage)	1200.0

823

NTHER Calibration of digital Voltmeter - Calibration of Voltmeter

Calibration of Voltmeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Voltage)	1200.0
A.2 (dc Voltage)	1200.0

824

IS : 1998:1962 ,Reaffirmed :2018 & IEC 60112:2003 - IS 1998 : Methods of test for thermosetting synthetic resin bonded laminated sheets IEC 60112:2003 :Methods of test for thermosetting synthetic resin bonded laminated sheets

IS 1998 : Methods of test for thermosetting synthetic resin bonded laminated sheets IEC 60112:2003 :Methods of test for thermosetting synthetic resin bonded laminated sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl : 15 of IS 1998 (Insulation resistance after Immersion in water after 24 hrs. Measurement of Insulation Resistance between each pair of Electrode at Potential Difference of 500V DC+/-50VDC for 1 minutes, Insulation resistance shall be min. 10 ^4 Mega Ohms)	20000.0
Cl : 11.3 of IEC 60112 (Comparative Tracking Index, Maximum 50 drops withstand Voltage of 250V AC)	10000.0

825

IS 4970 & 1708 Identification of Wood & Moisture content (1973) - Key for Identification of Commercial Timbers

Key for Identification of Commercial Timbers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of Timber (IS 4970:1973))	5000.0
2 (Test for Moisture Content(IS 1708(Part 1):1986)	1000.0
3 (Test for Compressive strength parallel to grain(IS 1708(Part 8):1986)	1500.0
4 (Test for Compressive strength perpendicular to grain(IS 1708(Part 9):1986)	1500.0
5 (Test for Compressive strength Parallel to grain( IS 1708(8):1986 (with sample preparation))	3000.0

826

IS 7071(Part 1 to 3 & 4) (1986 & 1989) - Ropes and Cordages - Methods of Physical Test

Ropes and Cordages - Methods of Physical Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.4 (Rope Diameter)	1000.0
1.0 (Rope Breaking Load)	5000.0
6.0 (Linear Density)	1000.0
3.13 (Pitch)	1000.0
Firm's request (Thermal stability of Rope)	6000.0

827

Paint NTH ER Customer specification ISO (2022) - Paint NTH ER Customer specification ISO

Paint NTH ER Customer specification ISO

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (UV weathering Test (UVA-340 lamp) ,40 days ISO 16474 - 3 Method A Cycle 1)	50000.0
2 (Impact Resistance Test ( 5N.m) ISO 6272-2)	5000.0
3 (Salt spray Test, for 40 days ISO 9227:2017)	50000.0
4 (100 days Acid test (Foul Sewer) (10 % v/v Sulphuric acid for 100 days))	20000.0
5 (Dry Film Thickness (DFT) ,microns)	1200.0
6 (Adhesion ,Pull Off (ASTM D 4541 /ISO 4624))	2500.0
7 (Holiday test)	5000.0
8 (Salt spray test 96 hours(5%NACL solution) ASTM B 117)	5000.0
9 (Salt spray Test 850 hours(5%NaCl solution) ASTM B 117)	42500.0
5 (Salt spray test for 500 hours (5% NaCl Solution))	25000.0
9 (Bend test (with 6.25 mm in type 1 apparatus) Clause 2 of IS 101 (Part 5/Sec 2))	1000.0
10 (Impact Resistance test)	1500.0

828

ASTM F 959M 06 - Standard Specification for Compressible-Washer-Type Tension Indicator for use with structural Fastener

Standard Specification for Compressible-Washer-Type Tension Indicator for use with structural Fastener

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Dimension(thickness))	500.0
8 (Dimension(Inside Diameter))	500.0
8 (Dimension(Outside Diameter))	500.0
8 (Dimension(Number of Protrusions))	500.0
6 (chemical composition (Carbon))	500.0
6 (chemical composition (Manganese))	1000.0
6 (chemical composition (Phosphorus))	500.0
6 (chemical composition(Sulphur))	500.0
6 (Chemical Composition(Silicon))	500.0
6 (Chemical Composition(Chromium))	1000.0

829

IS 6649 (1985) - Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Rockwell C/ Vickers)	2000.0
3 (Thickness, S)	500.0
3 (Chemical Composition as per IS 1570 Part-2.)	500.0
3 (Inner Diameter, (Φ d1))	500.0
8 (Mass of zinc coating)	2000.0
3 (Outer Diameter, (Φ d2))	500.0

830

IS 6623 (2004) - High Strength Structural Nuts

High Strength Structural Nuts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-6) clause No.-7)	3000.0
5 (Mechanical Properties(Rockwell Hardness Scale-C) as per IS 1367(Part-6) clause-7)	2000.0
5 (Mechanical Properties(Vicker Hardness)as per IS 1367(Part-6):2018 clause No- 7)	2000.0
4 (Dimension(Height of head),m)	500.0
4 (Dimension(width across corner),e)	500.0
4 (Dimension(width across flats),s)	500.0

831

IS 3757 (1985) - Specification for high strength structural bolts (Second Revision)

Specification for high strength structural bolts (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Dimension (Length of bolt))	200.0
2 (Dimension (Shank Diameter))	200.0
2 (Dimension (Width across the flat))	400.0
2 (Dimension (Width across the edge))	400.0
2 (Dimension (Height of the head))	400.0
4 (Mechanical Properties(Tensile Strength) as per IS 1367(Part-3):2017 Clause No.- 7)	3000.0
4 (Mechanical Properties(Ultimate Tensile Load) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties(Vickers Hardness ) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties( Rockwell Hardness Scale- C) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Carbon)	500.0
4 (Sulfur)	500.0
4 (Phosphorus)	500.0
4 (Boron)	500.0

832

IS 1171 (2011) - Ferromanganese - Specification (Fifth Revision)

Ferromanganese - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.3 Ferromanganese High Carbon (Manganese Content %)	2000.0
3.1.3 Ferromanganese High Carbon (Carbon %)	1500.0
3.1.3 High carbon ferromanganese (Silicon %)	1500.0
3.1.3 Ferromanganese High Carbon (Sulphur %)	1500.0
3.1.3 Ferromanganese High Carbon (Phosphorus (as P)%)	1500.0

833

Berger Customer Specification -NTH ER Paint 1 (2022) - Berger Customer Specification -NTH ER Paint 1

Berger Customer Specification -NTH ER Paint 1

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Shelf life @ 30 °C For 12 Months both liquid and powder)	10000.0
2 (Abrasion Resistance (ASTM - D — 4060))	5000.0
3 (Pigment, as metallic Zinc %)	2000.0
4 (Zinc Shape(ASTM D 520))	2000.0
5 (Zinc size)	1000.0
a (As per Customer Requirement)	100000.0
2 (Hardness test Shore D)	2500.0
3 (tensile strength)	3500.0
V (Tensile strength Mpa ASTM D2370)	2000.0
vi (Shore D Hardness (ASTM D2240))	2000.0
10 (Colour)	100.0
11 (Viscosity at 23 ± 2 ºC IS:101:1989, Part 1,Section 5)	1000.0
12 (Flash point (in ºC))	1200.0
13 (Specific Gravity (kg/Ltr) ISO 2811)	500.0
15 (Drying time a)Surface dry)	250.0
16 (Drying time b)Hard dry)	250.0
17 (Finess of Grind (in µ))	1000.0
18 (Pigment (% by wt.))	1200.0
18 (Volatile matter (in % by wt.))	1000.0
19 (Volume solid %)	1000.0
20 (Mass solid (in % by wt.))	1000.0
21 (Adhesion Pull off)	3500.0
22 (Adhesion Cross hatch)	2500.0
23 (Resistance to salt spray for 500 hours ASTM B 117)	25000.0
24 (Drying Properties* at 25±2 ºC (Touch dry))	250.0
25 (Flexibility test)	500.0
26 (Bend test)	500.0
26 (Impact test)	2500.0
27 (Scratch Hardness test)	1500.0
29 (Adhesion (as system) test Method A of ASTM D3359)	1500.0

834

IS 5287 (2005 RA2020) - ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED)

ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Ethyl Alcohol Content % BY MASS)	2000.0
7.2 (Freedom from Sedimentation and Harmful Ingredients)	100.0
7.3 (Freedom from Added Colouring Matter)	500.0
7.4 (Taste and Aroma)	500.0
7.5 Table 1 (i) (Residue on evaporation)	300.0
7.5 Table 1 (ii) (Total acids as tartaric acid)	500.0
7.5 Table 1 (iii) (Volatile acids as acetic acid)	500.0
FSSAI (Arsenic)	500.0
7.5 Table 1 (iv) (Esters as ethyl acetate)	1000.0
7.5 Table 1 (v) (Higher alcohols as amyl alcohol)	500.0
7.5 Table 1 (vi) (Aldehydes as acetaldehyde)	500.0
7.5 Table 1 (vii) (Furfural)	500.0
7.5 Table 1 (viii) (Copper (as Cu))	500.0
7.5 Table 1 (ix) (Methyl alcohol)	600.0
FSSAI (Lead)	500.0
FSSAI (Mercury)	500.0
FSSAI (Cadmium)	500.0

835

IS 9537 : Part 1 (1980) - Specification for conduits for electrical installations: Part 1 general requirements

Specification for conduits for electrical installations: Part 1 general requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Compression Test (Compression Force: 1250 N))	3000.0
9 (Compression Test (Compression Force: 4000 N))	3000.0
9 (Compression Test (Compression Force: 750 N))	3000.0
7 (Outside Diameter (Cl 7.1 of IS 9537 (Part-II): 1981)	500.0
7 (Wall Thickness (Cl. 7.1 of IS 9537(Part II):1981)	500.0
7 (Checking the Minimum Outside diameter (Cl 7.2.1 of IS 9537(Part II): 1981)	250.0
7 (Checking the Maximum Outside diameter (Cl 7.2.2 of IS 9537(Part II): 1981)	250.0

836

NTH ER Customer specification 2 -High Polymer - High Pressure Decorative Laminated sheet IS 2046:1995 RA 2020

High Pressure Decorative Laminated sheet IS 2046:1995 RA 2020

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.0 (Resistance to colour change in Xenon arc light (Blue wool Std No 8))	8000.0
7.1 (Resistance to colour change in Xenon arc light)	5000.0

837

IS 383 for coarse aggregate (2016) - Coarse and fine aggregate for concrete

Coarse and fine aggregate for concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0

838

PGCIL SFQP No.: Doc No. C/FQA/SFQP/SCW REV.06 dated:03.08.2020 (2020) - Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.6 (Measurement of Resistivity of Gravel)	20000.0

839

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
6 (Test for Silt content- (CPWD Specification))	1000.0
7 (Deleterious Materials)	2000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
10 (Test for bulking of sand)	1000.0

840

IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision )

Concrete Mix Proportioning — Guidelines ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Concrete Mix Design (IS 10262:2019))	35000.0