NTH - Management Information System

National Test House (SR), Chennai

CSIR Road, Tharamani, Chennai - 600113, Chennai, Chennai, Tamil Nadu, 600113

9444380435 directornthsr[at]nth[dot]gov[dot]in

Scope List

Reset

487 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

331

IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17 & 18 (Identification, Packing & Marking)	-
17.3 (Marking)	-
15.1.C (Minimum thickness of insulation)	250.0
15.1.C (Minimum thickness of sheath)	250.0
15.2 (e) (Average thickness of insulation)	250.0
15.2 (e) (Average thickness of sheath)	250.0
13.3 (ARMOURING)	100.0
15.1.d i (Elongation at break-Black)	250.0
15.1.d i (Elongation at break-B)	250.0
15.1.d i (Elongation at break-Y)	250.0
15.1.d i (Elongation at break-R)	250.0
15.1.d i (Tensile strength at break-R)	250.0
15.1.d i (Tensile strength at break-Y)	250.0
15.1.d i (Tensile strength at break-B)	250.0
15.1.d i (Tensile strength at break-Black)	250.0
15.1.d ii (Elongation at break-Black)	250.0
15.1.d ii (Elongation at break-B)	250.0
15.1.d ii (Elongation at break-Y)	250.0
15.1.d ii (Elongation at break-R)	250.0
15.1.d ii (Tensile strength at break-Black)	250.0
15.1.d ii (Tensile strength at break-B)	250.0
15.1.d ii (Tensile strength at break-Y)	250.0
15.1.d ii (Tensile strength at break-R)	250.0
15.1.d iii (Hot set test-Permanent elongation after cooling-Black)	250.0
15.1.d iii (Hot set test-Permanent elongation after cooling-B)	250.0
15.1.d iii (Hot set test-Permanent elongation after cooling-Y)	250.0
15.1.d iii (Hot set test-Permanent elongation after cooling-R)	250.0
15.1.d iii (Hot set test-Elongation under load-Black)	250.0
15.1.d iii (Hot set test-Elongation under load-B)	250.0
15.1.d iii (Hot set test-Elongation under load-Y)	250.0
15.1.d iii (Hot set test-Elongation under load-R)	250.0
15.1.e ii (Elongation variation)	1000.0
15.1.e ii (Tensile strength variation)	1000.0
15.1.e i (Elongation at break)	1000.0
15.1.e i (Tensile strength at break)	250.0
15.3 (a) (Conductor resistance-Black )	2000.0
15.3 (a) (Conductor resistance-Blue)	500.0
15.3 (a) (Conductor resistance-Yellow )	500.0
15.3 (a) (Conductor resistance-Red )	500.0
15.2 (c) (Wrapping test ( for aluminium 1)	500.0
15.2.1.c2 (a) (Oxygen index )	3500.0
15.1 (a) ii (Tensile Test )	500.0
15.1.1.g (Temperature index)	1000.0
15.2.1.c2 (d) (Halogen acid gas evaluation)	3500.0
15.1.1.c2 (d) (Optical density of smoke)	3500.0
15.2 (a) (Annealing test ( for copper ))	-
15.1 (a) i (Annealing test)	1000.0
15.1 (Test on extra cores, Four core)	6000.0
15.1 (Test on extra cores, three core)	4000.0
15.1 (Test on extra cores, two core)	2000.0
15.2 (c) (Wrapping test ( for aluminium 1)	500.0
15.1.f (Volume resistivity at ambient temperature-Black)	500.0
15.1.f (Volume resistivity at ambient temperature-B)	500.0
15.1.f (Volume resistivity at ambient temperature-Y)	500.0
15.1.f (Volume resistivity at ambient temperature-R)	500.0
15.1 (a) ii (Tensile Test )	500.0
15.1.g (High Voltage test at room temperature)	2000.0
15.3 (a) (Conductor resistance-Black )	2000.0
15.3 (a) (Conductor resistance-Blue)	500.0
15.3 (a) (Conductor resistance-Yellow )	500.0
15.3 (a) (Conductor resistance-Red )	500.0
15.4 (Cold bend test)	1000.0

332

CUS/SR/MECH-1 - Colour coated Galvalume profile sheet

Colour coated Galvalume profile sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Total coated thickness, mm)	1000.0
2.0 (Tensile strength, MPa)	1000.0
2.0 (Yield strength, MPa)	1000.0
2.0 (Percentage Elongation in 50mm gauge length, %)	1000.0
4.0 (Chemical composition, % by mass)	2000.0
5.0 (Coating thickness of inner and outer layers)	4500.0
3.0 (Mass of zinc coating (Triple spot & Single test))	3000.0
1.0 (Base metal thickness)	-
6.0 (Dimensions, mm)	2000.0

333

IS 2465 (1986) - Cable for Motor Vehicles

Cable for Motor Vehicles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

334

IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Material)	1000.0
4.2 (Material : Insulation)	100.0
4.2 (Material : Messenger Conductor)	100.0
6.4 (Construction : Conductor)	250.0
7.1 (Construction Insulation)	100.0
10.1 (1) f (Volume resistivity for XLPE)	250.0
10.1 (1) f (Volume resistivity for XLPE)	1000.0
12 (Identification)	100.0
15 (Discrete Tests)	12500.0
10.1 (Type tests (Complete Cable))	20000.0
10.2 (Acceptance tests (Complete Cable))	16000.0

335

GOST 2850-80 (80) - Millboard

Millboard

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Density , Grade : KAOH-1& KAOH-2)	1000.0
2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-1)	1500.0
2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-1)	1500.0
2 (Ultimate Tensile Strength (Transverse Direction) , Grade KAOH-2)	1500.0
2 (Ultimate Tensile Strength (Longitudinal Direction) , Grade KAOH-2)	1500.0
3 (Moisture Content, Grade: KAOH-1)	1000.0
3 (Moisture Content, Grade: KAOH-2)	1000.0
4 (Loss of Weight by Calculation, Grade : KAOH-1 & KAOH-2)	2000.0

336

IEC 62561-2 (2018) - Lightning Protection System components (LPSC) - Part 2: Requirements for conductors and earth electrodes

Lightning Protection System components (LPSC) - Part 2: Requirements for conductors and earth electrodes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.6 (Tensile strength)	4000.0

337

IEC 62561-1 (2017) - Lightning Protection System components (LPSC) - Part 1: Requirements for connection components

Lightning Protection System components (LPSC) - Part 1: Requirements for connection components

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.5 (Static mechanical test)	5000.0

338

IS 516 : Part 1 : Sec 1 (2021) - Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Compressive Strength of CC Cube 1 set IS 516 (Part1)/Sec1:2021)	1200.0

339

IS 8887 (2018) - Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2&6.2 v (Particle charge)	1500.0
4.2&6.2 viii (Miscibility with water)	1200.0
4.2&6.2 ix 2 (Tests on residue: Penetration 25dg/100g/5sec)	1200.0
4.2&6.2 ix 3 (Tests on residue: Ductility 27°C/cm)	1200.0
4.2&6.2 ix 4 (Tests on residue: Solubility I tricholoethylene,)	1200.0
4.2&6.2 ix 1 (Tests on residue: Residue by evaporation)	1200.0
4.2&6.2 iv (Storage stability after 24 hr)	1200.0
4.2&6.2 i (Residue on 600 micron IS seive)	1200.0

340

NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light (2022) - NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light

NTH SR MICR Cheque Paper Sensitization to chemicals and UV Light

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

341

IS 7318 : Part 1 (1974) - Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel

Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Visual examination)	1000.0
5.2.2 (Macro-examination)	1000.0

342

customer specification SR Chennai-AAS (2022) - customer specification SR Chennai-AAS

customer specification SR Chennai-AAS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Iron (as Fe2O3))	1200.0
3 (Calcium (as CaO))	1200.0
1 (Aluminum (as Al2O3))	2400.0
4 (Total Silica (as SiO2))	1000.0
5 (Magnesium (as Mg))	2000.0
6 (Sodium (as Na))	1200.0

343

IS 15298 : PART 2 (2011) - Personal Protective Equipment Part 2 Safety Footwear

Personal Protective Equipment Part 2 Safety Footwear

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

344

NSS 2022 (2022) - Non Standard Specification (NSS) as per Customer's request

Non Standard Specification (NSS) as per Customer's request

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

345

DKD-R 6-1 (2014) - Calibration of Pressure Gauges.

Calibration of Pressure Gauges.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Pressure (Accu: 0.50%))	3000.0
7 (Pressure (Accu: 0.25%))	4000.0

346

IS 101 : Part 3 : Sec 5 Hegman Gauge (2022) - Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision (Hegman Gauge)

Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision (Hegman Gauge)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.1.1 (Hegman gauge - Length)	1500.0

347

1708 (1986) - Testing of Small Specimen of Timber

Testing of Small Specimen of Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 1 (Moisture Content, in %)	1000.0
Part 2 (Specific Gravity /Density, g/cm3)	500.0
Part 5 (Static Bending Strength (MoR), N/mm2)	3000.0
Part 8 (Compressive Strength Parallel to Grain, N/mm2)	3000.0
Part 9 (Compressive Strength Perpendicular to Grain, N/mm2)	3000.0

348

IS 16491 : Part 2 (2016) - Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics

Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

349

NTH/WI/MC 6 (2019) - Calibration of Stage micrometer, Microscope standard kit, Microscope scale

Calibration of Stage micrometer, Microscope standard kit, Microscope scale

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Measurement of scale graduation)	1500.0
1.2 (Measurement of scale graduation)	1500.0
1.3 (Measurement of scale graduation)	1500.0

350

101 part 5 sec 2 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

351

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

352

Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products

Methods of Sampling and Test for Paints, Varnishes and related products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

353

IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating ))	29500.0
5 (The insulation shall be of polyvinyl chloride compound of a) Type A — Cables for fixed installation b) Type C — Heat-resistant cables (HR) c) Type D — Flexible cables and cords The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor)	-
6 (Filler: Material & Application The fillers shall be composed of one of the following or of any combination of the following: a) A compound based on unvulcanized rubber or plastics; or b) Natural or synthetic textiles; or c) Paper; or d) PVC)	-
7 (Binder tape (Binder tape shall consist of plastic or proof textile material.))	-
8 (Sheath: Material, Colour & application of sheath The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below: a) Type ST1 — cables for fixed installations b) Type ST2 — cables sheathed with 85°C HRPVC compound c) Type ST3 — flexible cables)	-
9 (Ovality)	-
12 (Core identification)	-
13 (Cable code)	-
15 (Packing and Marking)	-
Table 1. iii. a. 1 (Annealing test for copper (core 1))	500.0
Table 1. iii. a. 2 (Tensile test for Aluminium(core 1))	500.0
Table 1. iii. a. 3 (Wrapping test for Aluminium)	500.0
Table 1. iii. a. 4 (Conductor resistance test (core 1))	1500.0
Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only))	1000.0
Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath)	1000.0
Table 1. iii. b(2) (Minimum thickness of insulation (Core 1))	500.0
Table 1. iii. b(3) (Average thickness of sheath)	-
Table 1. iii. b(4) (Minimum thickness of sheath)	-
Table 1. iii. b(5) (Overall dimension)	500.0
Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1))	1000.0
Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1))	1000.0
Table 1. iii. c.2 (Loss of mass test for insulation (Core 1))	500.0
Table 1. iii. c.3(1) (Percentage elongation after ageing for insulation(Core 1),)	500.0
Table 1. iii. c.3(2) (Tensile strength test after ageing for insulation(Core 1), Tensile strength test after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1))	-
Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1))	-
Table 1. iii. c.4 (Shrinkage test for insulation(Core 1))	500.0
Table 1. iii. c.5 (Heat shock test for insulation(Core 1))	250.0
Table 1. iii. c.6 (Hot deformation test for insulation(Core 1))	250.0
Table 1. iii. c.7 (Thermal stability test for insulation(Core 1))	500.0
Table 1. iii. c.8 (Cold bend test for insulation(Core 1))	1000.0
Table 1. iii. c.9 (Cold impact test for insulation(Core 1))	1000.0
Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1))	750.0
Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1))	500.0
Table 1. iii. c.11 (The Oxygen index for insulation(Core 1))	5000.0
Table 1. iii. c.12 (Test temperature index for insulation(Core 1))	5000.0
Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1))	5000.0
Table 1. iii. c.14 (Smoke density test for insulation (Core 1))	5000.0
Table 1. iii. d.1(1) (Tensile strength for sheath)	-
Table 1. iii. d.1(2) (Elongation test for sheath)	-
Table 1. iii. d.2 (Loss of mass test for sheath)	-
Table 1. iii. d.3(1) (Tensile strength after ageing for sheath)	-
Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath)	-
Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath)	-
Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath)	-
Table 1. iii. d.4 (Shrinkage test for sheath)	-
Table 1. iii. d.5 (Heat shock test for sheath)	-
Table 1. iii. d.6 (Hot deformation test for sheath)	-
Table 1. iii. d.7 (Thermal stability for sheath)	-
Table 1. iii. d.8 (Oxygen index for sheath)	5000.0
Table 1. iii. d.9 (Test for temperature index for sheath)	5000.0
Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath)	5000.0
Table 1. iii. d.11 (Smoke density rating for sheath)	5000.0
Table 1. iii. d.12 (Cold bend test for sheath)	-
Table 1. iii. d.13 (Cold impact test(for sheath))	-
Table 1. iii. e.1(1) (High voltage test (water immersion test))	3000.0
Table 1. iii. e.1(2) (High voltage test DC (Core 1))	1000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature))	1500.0
Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning)	500.0
Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion)	750.0
Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use))	3000.0
Table 1. iii. e.5(1) (High Voltage Test after additional ageing)	-
Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing)	-
Table 1. iii. (Type tests)	40000.0
Table 1 (Test on two core cable/single core sheathed cable)	2000.0
Table 1 (Test on three core cable)	4000.0
Table 1 (Test on four core cable)	6000.0
Table 1 (Test on five core cable)	8000.0
Table 1 (Test on six core cable)	10000.0
table 1 (Test on seven core cable)	12000.0
Table 4 of IS 191 (Purity test (for Cu))	3500.0

354

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Substances)	1000.0

355

IS 3087 (2005) - Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.5 & 11.7Table 1, Sl No.(v) , (Swelling due to surface absorption-IS 2380 (Part 17):1977)	2000.0
9.4 & 11.6, Table 1, Sl No.(iii) & (iv) (Swelling in water-IS 2380 (Part 17):1977)	1500.0
9.3 & 11.5, Table 1, Sl No.(ii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
9.2 & 11.4 (Moisture content-IS 2380 (Part 3):1977)	1000.0
9.1 & 11.3, Table 1, Sl No.(i) (Density-IS 2380 (Part 3):1977)	500.0
8 and 11.2 (Dimensions and Tolerances-IS 2380 (Part 2):1977)	500.0
custom (Compression strength)	1500.0
custom (Compression strength)	1500.0
custom (Lead content)	1200.0
custom (Shore D)	1000.0
11.9.1, Table 1, Sl No.(ix), a & b (Tensile strength perpendicular to surface after cyclic/accelerated water resistance test-IS 2380 (Part 5):1977)	2000.0
11.10, Table 1, Sl No.(x) (Screw Withdrawal Strength-IS 2380 (Part 14):1977)	1500.0
11.9, Table 1, Sl No.(viii) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
11.8, Table 1, Sl No.(vi) & (vii) (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
9.6 (Workability-IS 3087:2005)	2000.0

356

School Bag-CUST-TNTB&ESC (2021) - TS for School Bag

TS for School Bag

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part1 1.1 (Colour of the Bag)	85.0
Part1 1.2 (Colour of the Front Pocket)	85.0
Part1 1.3 (Colour of Shoulder Strip)	85.0
Part1 1.4 (Colour of Adjustable Belt)	85.0
Part1 1.5 (Colour of Beeding)	85.0
Part1 1.6 (colour of shoulder adjustable buckle)	85.0
Part1 1.7 (Colour of Water bottle pocket)	85.0
Part1 1.8 (Colour of Zip & Runner)	85.0
Part1 1.9 (Colour of ID Card pocket)	80.0
Part1 1.10 (Colour of Top handle)	80.0
Part1 1.11 (Colour of Belt Buckle)	80.0
Part1 1.12 (Colour of Inner Compartment)	80.0
Part2 2.1.1 (School Bag Length)	70.0
Part2 2.1.2 (School Bag Breadth)	35.0
Part2 2.1.3 (School Bag Total Depth, Border side)	35.0
Part2 2.1.4 (School Bag First Compartment Depth)	35.0
Part2 2.1.5 (School Bag Second Compartment Depth)	35.0
Part2 2.1.6 (Thickness of School bag material)	35.0
Part2 2.1.7 (Thickness of School bag Compartment Material)	35.0
Part2 2.1.8 (Weight of School bag)	35.0
Part2 2.2.1 (Front pocket Length Top-to-Bottom)	35.0
Part2 2.2.2 (Front pocket Breadth Right-to-Left)	35.0
Part2 2.2.3 (Front pocket Depth)	70.0
Part2 2.3 (SHOULDER STRIP-Edges stitched lengthwise along with foam)	35.0
Part2 2.3.1 (Shoulder Strip Length)	35.0
Part2 2.3.2 (Shoulder Strip Breadth)	35.0
Part2 2.3.3 (Shoulder Strip Thickness including foam)	35.0
Part2 2.3.4 (Shoulder Strip Hooke, free Length)	35.0
Part2 2.4.1 (Water Bottle Pocket Length)	70.0
Part2 2.4.2 (Water Bottle Pocket Depth at bottom)	35.0
Part2 2.4.3 (Water Bottle Pocket Diameter of Elastic on Stretching)	70.0
Part2 2.5.1.1 (First Compartment Zip Length)	30.0
Part2 2.5.1.2 (Zip Size of First Compartment)	30.0
Part2 2.5.1.3 (Second Compartment Zip Length)	30.0
Part2 2.5.1.4 (Zip Size of Second Compartment)	30.0
Part2 2.5.2.1 (Front Pocket Zip Length)	30.0
Part2 2.5.2.2 (Front Pocket Zip size)	30.0
Part2 2.5.3.1 (Runner Handle Length)	30.0
Part2 2.5.3.2 (Runner Handle Width)	30.0
Part2 2.5.3.3 (Runner Handle Thickness)	30.0
Part2 2.5.3.4 (Weight of runner handle with head)	30.0
Part2 2.6.1 (ID card Pocket Length)	30.0
Part2 2.6.2 (ID card Pocket Width)	30.0
Part2 2.7.1 (Stitched Edges Pipe Beeding Diameter)	30.0
Part2 2.8.1 (Top Handle Length)	30.0
Part2 2.8.2 (Top Handle Breadth/Diameter)	30.0
Part2 2.9 (Adjustable Belt free ends)	30.0
Part2 2.9.1 (Adjustable Belt Length)	23.0
Part2 2.9.2 (Adjustable Belt Breadth)	23.0
Part2 2.9.3 (Adjustable Belt Thickness)	23.0
Part2 2.9.4 (Adjustable Belt Weight per meter)	23.0
Part2 2.10 (Shoulder Adjustable Belt Buckle)	23.0
Part3 3.1.1 (Bag Outer Layer material)	210.0
Part3 3.1.2 (Bag Inner Layer material)	210.0
Part3 3.2.1 (Compartment Outer Layer material)	210.0
Part3 3.2.2 (Compartment Inner Layer material)	210.0
Part3 3.3.1 (Front Pocket Outer Layer material)	210.0
Part3 3.3.2 (Front Pocket Inner Layer material)	210.0
Part3 3.4.1 (Shoulder Strip Outer Layer material)	210.0
Part3 3.4.2 (Shoulder Strip Inner Layer material)	210.0
Part3 3.4.3 (Shoulder Strip Cushion Foam material)	210.0
Part3 3.5.1 (Water Bottle Pocket Outer Layer)	210.0
Part3 3.5.2 (Water Bottle Pocket Inner Layer material)	210.0
Part3 3.5.3 (Water Bottle Pocket Net material)	210.0
Part3 3.6 (Zip material material)	210.0
Part3 3.7 (Runner material material)	210.0
Part3 3.8 (ID Card material material)	210.0
Part3 3.9 (Stitched Edges Pipe Beeding material material)	210.0
Part3 3.10 (Top handle material)	210.0
Part3 3.11 (Adjustable Belt material)	215.0
Part3 3.12 (Shoulder adjustable belt buckle material)	215.0
Part4 4.1.1 (Bag Outer Material Breaking Strength Warp)	425.0
Part4 4.1.1.1 (Bag Outer Material Breaking Strength Weft)	425.0
Part4 4.1.2 (Bag Outer Material Tearing Strength Warp)	425.0
Part4 4.1.2.1 (Bag Outer Material Tearing Strength Weft)	425.0
Part4 4.1.3 (Bag Outer Material GSM)	425.0
Part4 4.1.4 (Bag Outer Material Colour Fastness to Water)	425.0
Part4 4.2.1 (Bag Inner Material Breaking Strength Warp)	425.0
Part4 4.2.1.1 (Bag Inner Material Breaking Strength Weft)	425.0
Part4 4.2.2 (Bag Inner Material Tearing Strength Warp)	425.0
Part4 4.2.2.1 (Bag Inner Material Tearing Strength Weft)	425.0
Part4 4.2.3 (Bag Inner Material GSM)	425.0
Part4 4.2.4 (Bag Inner Material Colour Fastness to Water)	425.0
Part4 4.3.1 (Lateral Strength of Slide Fastener(Zip))	500.0
Part4 4.3.2 (Resistance of Slide Fastener To Repeated Opening and Closing(Zip))	1000.0
Part4 4.3.3 (Strength of Slide Fastener Puller(Zip))	500.0
Part4 4.4.1 (Minimum Static Load Bearing Capacity for 1 hour 10kg or15kg or 20kg)	270.0
Part4 4.4.2 (Shoulder Strap Joint pulling Strength(Top back Strap))	270.0
Part4 4.4.3 (Attachment Strength of Adjustable Belt and Buckle)	270.0
Part4 4.4.4 (Top Handle Attachment Strength)	270.0
Part4 4.4.5.1 (Right side Seam Strength)	270.0
Part4 4.4.5.2 (Left side Seam Strength)	270.0
Part4 4.4.5.3 (Bottom side Seam Strength)	270.0
Part4 4.4.5.4 (Pocket Seam Strength)	270.0
Part4 Note1 (Stitch Length)	270.0
Part4 Note2 (Top handle Joint Stitch)	270.0
Part4 Note3 (Shoulder Strip Joint Stitch)	260.0
Part4 Note4 (Provision of second compartment)	260.0
Part4 Note5 (Adjustable strip bottom stitch)	260.0
Part4 Note6 (Number of runners on each compartment)	260.0
Part4 Note7 (Shoulder Strap Attachment)	260.0
Part4 4.1.5 (Bag Outer Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.1.5.1 (Bag Outer Material Colour Fastness to minimum Wet 10 rubbings)	425.0
Part4 4.2.5 (Bag Inner Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.2.6 (Bag Inner Material Colour Fastness to minimum Wet 10 rubbings)	425.0
1 to 4, Note (Test Results)	19200.0

357

IS 12776 (2002) - Galvanized strand for earthing - Specification (First Revision)

Galvanized strand for earthing - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Construction)	-
6 (Diameter of the strand)	1000.0
8.1 (Breaking load of the wire)	1500.0
8.2 (Elongation of steel wire)	1500.0
8.3 (Resistance of the Earth Strand)	2000.0
8.4 (Wrapping test)	2000.0
8.5(1) (Galvanizing Test-Mass of Zinc coating)	2000.0
8.5(2) (Galvanizing test-Uniformity of Zinc Coating)	1000.0
8.6 (Torsion test)	2000.0
Annex A (8) (Lay ratio)	1000.0
Annex A(9) (Minimum breaking force of galvanized earth strand)	5000.0
Annex A(11) (Equivalent modulus of elasticity)	2000.0
4 (Material (Chemical Composition))	2500.0

358

IS 15652 (2006) - Insulating mats for electrical purposes - Specification

Insulating mats for electrical purposes - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

359

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 5 - Calibration of Hydraulic jack.

Calibration of Hydraulic jack.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of the hydraulic jack (20T))	12000.0

360

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 4 - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 1000 kN to 2000 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (above 1000 kN to 2000 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of Force proving instruments (above 1000 kN to 2000 kN))	20000.0