NTH - Management Information System

National Test House (SR), Chennai

CSIR Road, Tharamani, Chennai - 600113, Chennai, Chennai, Tamil Nadu, 600113

9444380435 directornthsr[at]nth[dot]gov[dot]in

Scope List

Reset

487 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

301

IS 8042 (2015) - White portland cement - Specification (Third Revision)

White portland cement - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Compressive strength, ,672±4 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Compressive strength, 168 ± 2 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Compressive strength, 72±1 h [as per IS 4031 (Part 6)], MPa)	1000.0
6 (Setting time Final [as per IS 4031 (Part 5)], minutes)	500.0
6 (Setting time Initial [as per IS 4031 (Part 5)], minutes)	500.0
6 (Soundness-autoclave method [as per IS 4031 (Part 3)], %)	1000.0
6 (Soundness-Lechatlier method [as per IS 4031 (Part 3)], mm)	500.0
5 (Magnesia (as per IS 4032), %)	500.0
5 (Insoluble Residue (as per IS 4032), %)	500.0
5 (Iron Oxide (as per IS 4032), %)	500.0
5 (Ratio of lime to silica, alumina and iron oxide (as per IS 4032))	1000.0
5 (Total Sulphur Content calculated as SO3 (as per IS 4032), %)	500.0
5 (Loss on ignition, (as per IS 4032), %)	500.0
5 (Chloride Content, (as per IS 4032), %)	500.0
6.1.1 (Progressive increase in strength -from the strength at 72 hrs)	2000.0
- (Consistency)	500.0

302

NTH/WI/MC (On the lines of IS:3624-1987) 9 - Calibration of Vacuum Gauges

Calibration of Vacuum Gauges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.2 (Vacuum gauge calibration)	1200.0

303

NTH/WI/MC (On the lines of DKD-R 6-1:01/2014) 8 - Calibration of Pressure Gauges

Calibration of Pressure Gauges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Industrial pressure gauge calibration)	1200.0

304

NTH/WI/MC (by substitutional weighing in Electronic balance with reference to OIML R-111) 7 - Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3

Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Analytical weight calibration)	4310.0

305

Elect-Safety on footwear IS 15298 Part 2 : 2011 (2011) - Personnel Protective Equipment . Part 2, Safety Footwear

Personnel Protective Equipment . Part 2, Safety Footwear

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

306

NLC Blended Organo Phosphonate - NLC (BOP)

NLC (BOP)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Calcium Scaling Inhibition Efficiency(%))	4000.0
2 (HEDP Content(% by mass))	1000.0

307

CUS/SR/MECH-9 - Link assembly

Link assembly

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Proof load)	2500.0
2.0 (Tensile load)	2500.0

308

IS 7739 : Part 5 (1976) - Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7739 (Microstructure)	3000.0

309

Customer specification - Flame retardant test for 4 hours

Flame retardant test for 4 hours

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
27600 (FLAME RETARDANT TEST FOR 4 Hrs.)	3000.0

310

IS 2202 : Part 1 (2023) - Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.15 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998)	1500.0
11.14 (Glue Adhesion Test-IS 4020 (Part 15):1998 for BWP and (60± 2)°C for MR)	1000.0
11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998)	2000.0
11.2 (General Flatness-IS 4020 (Part 3):1998)	1000.0
11.3 (Local planeness Test-IS 4020 (Part 4):1998)	1000.0
11.4 (Impact Indentation-IS 4020 (Part 5):1998)	1000.0
11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998)	1000.0
11.8 (Buckling Test-IS 4020 (Part 9):1998)	1500.0
11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998)	1000.0
11.12 (End Immersion Test-IS 4020 (Part 13):1998 for BWP and 3cycle for MR)	1000.0
11.10 (Misuse Test-IIS 4020 (Part 11):1998)	1000.0
11.6 (Edge loading test-IS 4020 (Part 7):1998)	1500.0
11.7.1 and 11.7.2 (Shock Resistance test- Cl 2.1 & 3.1 of IS 4020 (Part 8):1998)	1500.0
9 (Workmanship and Finish-IS 2202 (Part 1):1999)	1000.0
11.13 (Knife test-IS 4020 (Part 14):1998)	1000.0
4 (Grade, Type and Construction:)	1000.0
5 (Sizes:)	500.0
6 (Material:)	1000.0
custom (Density)	1000.0
custom (Shore hardness(D))	1000.0
custom (Lead content(as per standard AAS method))	1200.0
custom (Compressive strength- Paralllel)	1500.0
custom (Compression Test(Perpendicular))	1500.0

311

Customer Specification-TNCSC - Cust Spfn for Polypropylene Multifilament Twine Y Cone

Cust Spfn for Polypropylene Multifilament Twine Y Cone

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Visual Examination (as received))	250.0
2 (Breaking (Strength) Load, kg)	2000.0
3 (Colour (Visual))	250.0
4 (Length)	500.0
5 (Ply (Denier/Ply, on as received basis))	500.0

312

IS 1199 (4) - Methods of sampling and analysis of concrete

Methods of sampling and analysis of concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Cement content of hardened portland cement concrete, % by weight)	5000.0
Custom (Cement : Sand ratio by weight (considering the submitted mortar sample contains Sand & OPC only))	1000.0

313

IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3.b (Compressive Strength-7days)	2000.0
3.3.a (Compressive Strength-3 days)	2000.0
3.2.b (Setting Time (Final Setting Time))	500.0
3.2.a (Setting Time (Initial Setting Time))	500.0
3.4 (Chloride Content, %)	1000.0

314

IS 4351 (2003) - STEEL DOOR FRAMES — SPECIFICATION

STEEL DOOR FRAMES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Height)	1000.0
6 (Width)	1000.0

315

IS 432 : Part 1 (1982) - Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimensions)	600.0
6 (Mass per meter)	600.0

316

IS 9926 (1981) - SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS

SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Visual examination)	-
7.2 (Dimension: Diameter of the Wire)	1000.0
7.3 (Resistance test: Calculated resistance corrected to 20°C)	3000.0
7.0 (Acceptance test)	3000.0

317

WI Calibration (ECE) (0) - Calibration - Electrical

Calibration - Electrical

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Digital Multimeter Calibration of, V I R (3 ½ digit))	1000.0
0 (Calibration of Temperature Indicator (5 points) with simulation method temperature upto 300 deg C)	700.0
0 (Digital Multimeter Calibration of, V I R (3 ½ digit))	1000.0
5 Stopwatch (Time Parameter Calibration in Seconds)	1200.0

318

AISI 304 STAINLESS STEEL 304 (2022) - AISI 304 STAINLESS STEEL 304

AISI 304 STAINLESS STEEL 304

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon as C,% by mass)	700.0
2 (Silicon as Si ,% by mass)	700.0
3 (Manganese as Mn % by mass)	700.0
4 (Phosphorus as P, % by mass)	700.0
5 (sulphur as S,% by mass)	700.0
6 (Chromium as Cr % by mass)	800.0
7 (Nickel as Ni % by mass)	700.0

319

IS 2365 (2018) - Steel Wire Suspension Ropes for Lifts, Elevators and Hoists

Steel Wire Suspension Ropes for Lifts, Elevators and Hoists

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Breaking load)	10000.0

320

CUS/SR/MECH-8 - Composite Sandwich Shutter

Composite Sandwich Shutter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

321

CUS/SR/MECH-7 - Composite Plug

Composite Plug

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Minimum tensile load)	4000.0
2.0 (Minimum compression load)	4000.0

322

CUS/SR/MECH-6 - Composite Chequered Plate

Composite Chequered Plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	3000.0
2.0 (Breaking load)	3000.0

323

CUS/SR/MECH-5 - Composite Groove Channel

Composite Groove Channel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	3000.0
2.0 (Breaking load)	3000.0

324

CUS/SR/MECH-4 - Composite Top Beam

Composite Top Beam

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	4000.0
2.0 (Breaking load)	3000.0

325

CUS/SR/MECH-3 - Composite Top Channel

Composite Top Channel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Deflection)	4000.0
2.0 (Breaking load)	3000.0

326

CUS/SR/MECH-2 - Shear plate

Shear plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Breaking load)	3000.0

327

IS 16532: 2017 (2017) - APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6..0 (Thickness)	1000.0
6.0 (Cold Flexibility)	2000.0

328

SOCKS-CUST-TNTB&ESC (2022) - TNTB Technical Specification for socks

TNTB Technical Specification for socks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (General)	100.0
1.2 (Yarn)	100.0
1.3 (Splicing)	100.0
1.4 (Linking)	100.0
1.5 (Colour)	100.0
2.1 (Foot Length)	300.0
2.2 (Leg Length)	300.0
2.3 (Depth of top portion)	300.0
2.4 (Width of Foot & Leg at Centre)	300.0
2.5 (Mass per 10 pairs)	300.0
2.6 (Total number of Wales)	300.0
3.1 (Dimensional Change due to relaxation, Percent)	1000.0
3.2 (pH value of Aqueous Extract)	1000.0
3.3 (Colour Fastness to Light)	2000.0
3.4 (Colour Fastness to Washing)	1000.0
3.5 (Colour Fastness to Rubbing)	1000.0
3.6 (Colour Fastness to Perspiration)	1000.0
3.7 (Pairing)	220.0

329

OPTICAL FIBER CABLE - OPTICAL FIBER CABLE

OPTICAL FIBER CABLE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Marking)	500.0
2 (Description of Optical Fiber Cable)	500.0
4 (Construction of Optical Fiber Cable)	500.0
4.1(a) (Nos of Fiber and Colour)	1000.0
4.1(b) (Presence of Sheath/Covering in addition to coat on Fiber)	500.0
4.1(d) (Colour of Sheath)	500.0
4.1(e) (Mylar Fiber and Colour)	500.0
4.1(g) (Colour of Jacket)	500.0
WI/2 (FTIR method - Glass Fibers are Individual covered by Plastic or coated)	6000.0
1 (Customs Specification)	30000.0
4.1(f) (Any other Detail of fiber cable)	500.0
4.1(c) (Individual Sheathed of Fiber Cable)	8000.0
4.1(f) (Any other Detail of fiber cable)	500.0
4.1(h) (Overall Diameter of Jacket)	500.0
5 (OPTICAL FIBER CABLE 16 core)	64000.0

330

ISO 606 (2015) - Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4.2 (Breaking load, kN)	4000.0
3.3 (Dimensions, mm)	2000.0
3.3 (Chain length, mm)	1000.0