| 31 |
IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision) |
Methods of testing local thickness of electroplated coatings (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 3203 (Coating thickness) |
3000.0 |
|
|
| 32 |
Customized Specification for lavie Sport Swift Sml Whl Duffle - Customized Specification for Lavie Sport Swift Sml Whl Duffle |
Customized Specification for Lavie Sport Swift Sml Whl Duffle |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of the article) |
500.0 |
|
| - (Dimensions) |
500.0 |
|
| - (Weight) |
500.0 |
|
| - (Colour) |
500.0 |
|
| - (Identification Mark/Marking) |
500.0 |
|
| - (Fabric Identification) |
2000.0 |
|
| - (Opening) |
500.0 |
|
| - (Pocket) |
500.0 |
|
| - (Handle) |
500.0 |
|
| - (Wheels) |
500.0 |
|
| - (Trolley) |
500.0 |
|
| - (Strap) |
500.0 |
|
| - (Side lug) |
500.0 |
|
| - (Puller) |
500.0 |
|
| - (Zipper) |
500.0 |
|
| - (Combilock) |
500.0 |
|
| - (Volume) |
500.0 |
|
|
| 33 |
Customized Specification for BACKPACK - Customized Specification for BACKPACK |
Customized Specification for BACKPACK |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of the article) |
500.0 |
|
| - (Dimensions) |
1000.0 |
|
| - (Weight) |
1000.0 |
|
| - (Colour) |
500.0 |
|
| - (Volume) |
500.0 |
|
| - (Identification Marks/Markings) |
500.0 |
|
| - (Fabric Identification) |
2000.0 |
|
| - (Zip Compartment) |
500.0 |
|
| - (Water Bottle Pocket) |
500.0 |
|
| - (Front Pocket) |
500.0 |
|
| - (Handle(Visual)) |
500.0 |
|
| - (Shoulder Strap Construction) |
500.0 |
|
| - (Hook) |
500.0 |
|
| - (Sleeve) |
500.0 |
|
| - (Pocket) |
500.0 |
|
| - (Zip Pocket for rain safety) |
500.0 |
|
| - (Combilock) |
500.0 |
|
| - (Smart Sleeve) |
500.0 |
|
|
| 34 |
Specification for LED Based Flasher Light - Specification for LED Based Flasher Light |
Specification for LED Based Flasher Light |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (As per customers Specification) |
50000.0 |
|
| 1 (Voltage surge test. 1.8 kV as per IEC 61000-4-5) |
5000.0 |
|
| 2 (Damp Heat Test as per IEC 60571-2012) |
15000.0 |
|
| 3 (Dry heat test as per ELRS/SPEC/LFL/0017 (Rev-I, Sep 2024) Cl no. 6.10.5) |
10000.0 |
|
|
| 35 |
ASME Code IX Boiler and Pressure Vessel Code - QW 382 (2021) - QW 382 - Hard Facing Weld metal overlay (Wear Resistance) |
QW 382 - Hard Facing Weld metal overlay (Wear Resistance) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Macro Examination) |
1000.0 |
|
| 2.0 (Liquid Penetrant Test) |
1000.0 |
|
| 3.0 (Hardness) |
2000.0 |
|
| 4.0 (Chemical Composition, % by mass) |
8000.0 |
|
|
| 36 |
MDTS 48279 Rev 04 2022 (2022) - Technical Specification for Adhesion Promoting Primer Two Pack (MDTS 48279 Rev 04 2022) |
Technical Specification for Adhesion Promoting Primer Two Pack (MDTS 48279 Rev 04 2022) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 Technical requirement for Adhesion Promoting Primer (Two Pack) (Technical requirement for Adhesion Promoting Primer (Two Pack), Please refer annexure for the test results) |
90800.0 |
|
| Keeping properties/long duration tests (Keeping properties/long duration tests, Please refer annexure for the results) |
10000.0 |
|
|
| 37 |
RDSO Specification No. M&C/PCN/100/2018 (2018) - M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack) |
M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table I and Table II (Requirement for Epoxy-Based Zinc Phosphate Primer (Two Pack) Please refer annexure for the test results) |
51000.0 |
|
| Keeping properties/long duration test (Keeping properties for 12 months/long duration test - please refer to annexure for the test result) |
10000.0 |
|
|
| 38 |
IS: 1708 (Parts 1 to 18) : 1986 - Methods of Testing of Small Clear Specimens of Timber [Extra] |
Methods of Testing of Small Clear Specimens of Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 1,Clause 4 (Moisture Content) |
1000.0 |
|
| Part 2,Clause 4.1.a (Specific gravity) |
500.0 |
|
| Part 2,Clause 4.1.b (Adjusted specific gravity) |
500.0 |
|
| Part 5,Clause 4.2.ii (Equivalent fibre stress at maximum load ( modulus of rupture - M of R )) |
3000.0 |
|
| Part 5,Clause 4.2.iii (Modulus of elasticity ( M of E )) |
3000.0 |
|
| Part 8,Clause 4.1.ii (Compressive strength-Parallel to grain
[Compressive stress at maximum load]) |
1500.0 |
|
| Part 9,Clause 4.1.ii (Compressive strength-Perpendicular to grain
[Compressive stress at compression of 2.5 mm]) |
1500.0 |
|
| Part 5, Clause 4.2(iii) (Modulus of Elasticity (in wet condition), N/mm^2.) |
3000.0 |
|
|
| 39 |
RDSO - MDTS176 Rev. 04 (2016) - Technical specification for light weight body filler for high build-up passenger coaches |
Technical specification for light weight body filler for high build-up passenger coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Base filler (Visual under magnifier)) |
1200.0 |
|
| Table 1 (Pot life at 27+/- 2 Deg. C, (min) - Ann II of M&C/PCN/100/2013) |
1500.0 |
|
| Table 1 (Specific Gravity (ASTM D 1475)) |
1200.0 |
|
| Table 1 (Drying time a) surface dry max IS 101 (Part 3/sec 1)) |
1200.0 |
|
| Table 1 (Drying time b) hard dry max IS 101 (Part 3/sec 1)) |
1200.0 |
|
| Table 1 (Drying time c) Hard dry at 70 Deg C max IS 101 (Part 3/sec 1)) |
1200.0 |
|
| Table 1 (Flash point a) Component A (IS 101 (Part 1/sec 6))) |
1200.0 |
|
| Table 1 (Flash point a) Component B (IS 101 (Part 1/sec 6))) |
1200.0 |
|
| Table 1 (Consistency (IS 101 (Part 1/Sec 5)) |
1200.0 |
|
| Table 1 (Stopping properties (Appendix IX of M&C/PCN/100/2013)) |
1500.0 |
|
| Table 1 (Rubbing properties (Appendix X of M&C/PCN/100/2013)) |
1500.0 |
|
| Table 1 (Adhesion and compatibility in paint system (Appendix XII of M&C/PCN/100/2013)) |
1500.0 |
|
| Table 1 (Shelf life/Keeping properties 12 months (Appendix III of M&C/PCN/100/2013)) |
5000.0 |
|
| Table 1 (Tensile Strength (ASTM D 638)) |
2000.0 |
|
| Table 1 (Shore D Hardness @ 24 Hrs (ASTM D 2240)) |
1000.0 |
|
| Table 1 (Flexural Strength (ASTM D 790)) |
3000.0 |
|
|
| 40 |
ILC for water storage tanks - ILC for water storage tanks |
ILC for water storage tanks |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength) |
- |
|
| - (Flexural Modulus) |
- |
|
| - (Density) |
- |
|
| - (Melt Flow Index) |
- |
|
| - (Carbon Black Content) |
- |
|
| - (Carbon Black Dispersion) |
- |
|
| - (Thickness) |
- |
|
|
| 41 |
IS:191 Clause 7.1 Table 4 - Copper-Specification |
Copper-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (4) (Copper) |
2000.0 |
|
|
| 42 |
IS 191 (2007) - Copper - Specification (Fourth Revision) |
Copper - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 43 |
Custom specification NTH WR for General surface coating material - Custom specification NTH WR for General surface coating materials |
Custom specification NTH WR for General surface coating materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Galvanizing (Mass of Zinc Coating)) |
1500.0 |
|
| - (Uniformity of Coating) |
1500.0 |
|
| - (Purity of Copper) |
2000.0 |
|
|
| 44 |
Customized Specification for Bed Sheet and Pillow Cover - Customized Specification for Bed Sheet and Pillow Cover |
Customized Specification for Bed Sheet and Pillow Cover |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of the item) |
500.0 |
|
| - (Dimensions) |
1000.0 |
|
| - (Weight) |
500.0 |
|
| - (Design) |
500.0 |
|
| - (Active Ingredients) |
2000.0 |
|
| - (Visual Inspection) |
500.0 |
|
|
| 45 |
RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR UNSATURATED POLYSTER BASE KNIFING PUTTY
(TWO PACK), Please refer annexure |
SPECIFICATION FOR UNSATURATED POLYSTER BASE KNIFING PUTTY
(TWO PACK), Please refer annexure |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Unsaturated Polyester Putty (Please refer annexure for the result of Unsaturated Polyester Putty) |
20500.0 |
|
|
| 46 |
Customized Specification for FRP Chajja - Customized Specification for FRP Chajja [-] |
Customized Specification for FRP Chajja |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength) |
2000.0 |
|
| - (Compression Strength) |
3000.0 |
|
| - (Flexural Strength) |
3000.0 |
|
| - (Thickness) |
1000.0 |
|
|
| 47 |
RDSO Specification No. M&C/PCN/100/2018 - POLYURETHANE SURFACER (TWOPACK) |
POLYURETHANE SURFACER (TWOPACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drying time
a) Surface dry
b) Hard dry
c) Hard dry at 70°C) |
3600.0 |
|
| 2 (Consistency) |
1200.0 |
|
| 3 (Finish) |
1200.0 |
|
| 4 (Colour) |
1200.0 |
|
| 5 (Dry film thickness) |
1200.0 |
|
| 6 (Volume solids, %) |
2000.0 |
|
| 7 (Scratch hardness (1.5Kg Load)) |
1200.0 |
|
| 9 (Flashpoint
a) Component ‘A’
b) Component ‘B’) |
2400.0 |
|
| 10 (Fineness of Grind) |
1200.0 |
|
| 11 (Pot life (After induction time)
i) 27±2°C
ii) 40±2°C) |
1500.0 |
|
| 12 (Mass in Kg/10 litres) |
1200.0 |
|
| 13 (Keeping properties) |
2000.0 |
|
| 14 (Theoretical spreading rate) |
2000.0 |
|
| 15 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix of two components at 27± 2 °C in Supply condition) |
1200.0 |
|
|
| 48 |
RDSO SPECIFICATION M&C/PCN/100/2018 PUTTY - UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK) |
UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Drying time:
a)Surface dry
b) Hard dry
c)Hard dry time at 70 Deg. C) |
3600.0 |
|
| 2 (Consistency) |
1200.0 |
|
| 3 (Stopping properties) |
2000.0 |
|
| 4 (Rubbing properties) |
2000.0 |
|
| 5 (Hold out Property) |
2000.0 |
|
| 6 (Adhesion & Compatibility of Paint System) |
2000.0 |
|
| 7 (Pot life ,at 27±2 Deg. C) |
1500.0 |
|
| 8 (% solids) |
1200.0 |
|
| 9 (Keeping properties) |
5000.0 |
|
|
| 49 |
IS 15850 (2009) - Nuclear grade boron carbide - Specification |
Nuclear grade boron carbide - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clauses 4.2.1 and 4.2.2 (Total Boron In Boron Carbide) |
2000.0 |
|
|
| 50 |
CGRSP rubber pad as per RDSO Specification - CGRSP rubber pad as per RDSO Specification |
CGRSP rubber pad as per RDSO Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Compression Set) |
2000.0 |
|
| - (Modulus at 100% Elongation) |
2000.0 |
|
| - (Elongation at Break) |
2000.0 |
|
| - (Tensile Strength) |
2000.0 |
|
| - (Shore hardness) |
1000.0 |
|
| - (Tension Set Subject to 50% Stretch) |
2000.0 |
|
| - (Tensile Strength after ageing at 100±1ºC for 72+0/-2 hrs.) |
3000.0 |
|
| - (Tensile Strength(Retension after ageing)) |
1000.0 |
|
| - (Elongation at Break After ageing at 100±1ºC for 72+(0/-2) hrs) |
3000.0 |
|
| - (Elongation at Break (Retention after ageing)) |
1000.0 |
|
| - (Thickness) |
1000.0 |
|
| - (Specific Gravity) |
1000.0 |
|
| - (Ash Contents) |
2000.0 |
|
| - (Electrical resistance before immersion as per appendix "G") |
2000.0 |
|
| - (Electrical resistance after immersion as per appendix "G") |
3000.0 |
|
|
| 51 |
GFN Liners as per RDSO Specification - GFN Liners as per RDSO Specification [-] |
GFN Liners as per RDSO Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Internal Cavity) |
1000.0 |
|
| - (Water absorption) |
2000.0 |
|
| - (Cross Breaking Load) |
2000.0 |
|
| - (Glass Filler) |
2000.0 |
|
| - (Specific Gravity) |
1000.0 |
|
| - (Dielectric Strength) |
5000.0 |
|
| - (Volume Resistivity) |
3000.0 |
|
|
| 52 |
Customized Specification for Printed Papers/Books - Customized Specification for Printed Papers/Books [-] |
Customized Specification for Printed Papers/Books |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (GSM) |
1000.0 |
|
|
| 53 |
28907 (2021) - CUSTOM SPECIFICATION -IR STD. SPEC SR NO T-31-2021 FOR LADLE ANALYSIS [-] |
CUSTOM SPECIFICATION -IR STD. SPEC SR NO T-31-2021 FOR LADLE ANALYSIS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3.1 (Carbon) |
1000.0 |
|
| 4.3.1 (Manganese) |
1000.0 |
|
| 4.3.1 (Silicon) |
1000.0 |
|
| 4.3.1 (Sulphur) |
1000.0 |
|
| 4.3.1 (Phosphorus) |
1000.0 |
|
|
| 54 |
Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane - Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane [-] |
Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Thickness) |
1000.0 |
|
| - (Pressure Head Test) |
2000.0 |
|
| - (Tensile Strength(Longitudinal direction)) |
1000.0 |
|
| - (Tensile Strength(Transversal)) |
1000.0 |
|
| - (Elongation at Break(Longitudinal)) |
1000.0 |
|
| - (Elongation at Break(Transversal)) |
1000.0 |
|
| - (Tear Strength(Longitudinal)) |
1000.0 |
|
| - (Tear Strength(Transversal)) |
1000.0 |
|
| - (Low temperature flexibility) |
2000.0 |
|
| - (Heat Resistance) |
1000.0 |
|
| - (Static Puncture Resistance) |
1000.0 |
|
| - (Softening Point of coating compound) |
1500.0 |
|
| - (Water absorption at 24 hours) |
2000.0 |
|
|
| 55 |
Custom - Concrete - Hardened Concrete Physical & Chemical properties. |
Hardened Concrete Physical & Chemical properties. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Test for compressive strength (3) [IS 516 (Part 4)], N/mm^2) |
15000.0 |
|
| - - (Test for Alkali content (3) [IS 4032 or relevant specification], %) |
3000.0 |
|
| - - (Test for Chloride Content (3) [ IS 4032 or relevant specification], %) |
3000.0 |
|
| -- (Test for sulphate content (3) {is 4032 or relevant specification], %) |
3000.0 |
|
| - - (Test for Sulphate Content [IS 4032 or relevant specification], %) |
2000.0 |
|
| - - (Test for Alkali content (2) [IS 4032 or relevant specification)) |
2000.0 |
|
| - - (Test for Chloride Content (2) [IS 4032 or relevant specification], %) |
2000.0 |
|
| 8 (Equivalent Cube Strength [IS 516 (Part 4)], in N/mm^2) |
5000.0 |
|
| - (Test for Alkali content [IS 4032 / IS 2386], %) |
1000.0 |
|
| - - (Test for Chloride Content [ IS 4032 or relevant IS], %) |
1000.0 |
|
| - - (Test for Sulphate content [IS 4032 or relevant specification], %) |
1000.0 |
|
| 3 (Test for Carbonation [IS 516 (Part 5 / section 3)]) |
5000.0 |
|
| 8 (Test for compressive Strength (5) [IS 516 (Part 4)], in N/mm^2) |
25000.0 |
|
| - - (Test for Alkali content (5) [Is 4032 or relevant specification], %) |
5000.0 |
|
| - - (Test for Chloride Content (3) [ IS 4032 or relevant specification], %) |
3000.0 |
|
| - - (Test for Sulphate content (5) [IS 4032 or relevant specification]) |
5000.0 |
|
|
| 56 |
Customized Specification for Shore D hardness test - Customized Specification for Shore D hardness test [-] |
Customized Specification for Shore D hardness test |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Shore D harness) |
1000.0 |
|
|
| 57 |
1834 (1984) - SPECIFICATION FOR HOT APPLIED SEALING COMPOUNDS FOR
JOINTS IN CONCRETE |
SPECIFICATION FOR HOT APPLIED SEALING COMPOUNDS FOR
JOINTS IN CONCRETE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Pour Point) |
1500.0 |
|
| - (Flow Test) |
1500.0 |
|
| - (Penetration) |
1500.0 |
|
|
| 58 |
Customized Specification for SHYLA TOTE LARGE AST - Customized Specification for SHYLA TOTE LARGE AST |
Customized Specification for SHYLA TOTE LARGE AST |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature) |
500.0 |
|
| - (Outer dimensions(cm.) 37.4x14.7x26.3(+/-5%)) |
500.0 |
|
| - (Weight(Kg.) 0.60(+/-5%)) |
1000.0 |
|
| - (Capacity(ltrs)4.67(+/-5%)) |
1000.0 |
|
| - (Colour(assorted)) |
500.0 |
|
| - (Active Ingredient(Synthetic fabric)) |
2000.0 |
|
| - (Identification Mark/Marking) |
500.0 |
|
| - (Packing type and speciofication) |
500.0 |
|
|
| 59 |
Customized specification for SAIMAA LG HZ TOTE - Customized specification for SAIMAA LCHZ TOTE |
Customized specification for SAIMAA LCHZ TOTE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature of the product) |
500.0 |
|
| - (Specification(cm.)45x15x25(+/-5%)) |
500.0 |
|
| - (Weight(Kg.) 0.7(+/-6%)) |
1000.0 |
|
| - (Colour (assorted)) |
500.0 |
|
| - (Volume(ltrs) 10(+/-10%)) |
1000.0 |
|
| - (Packing type and specification) |
500.0 |
|
| - (Identification Mark/Marking) |
500.0 |
|
|
| 60 |
Customized Specification for LAVIE LADIES HANDBAG CROCO BURSA LG TOTE-NAVY - Customized Specification for LAVIE LADIES HANDBAG CROCO BURSA LG TOTE-NAVY |
Customized Specification for LAVIE LADIES HANDBAG CROCO BURSA LG TOTE-NAVY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Nomenclature) |
500.0 |
|
| - (Specification(cm.) 42x13x28 (+/-3)) |
500.0 |
|
| - (Weight(Kg.) 0.70(+/-6%)) |
1000.0 |
|
| - (Colour) |
500.0 |
|
| - (Volume(ltrs) 5 (+/-6%)) |
1000.0 |
|
| - (Packing type and specification) |
500.0 |
|
| - (Identification Mark/Marking) |
500.0 |
|
|
