NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

721

JIS K 5551:2008 (2008) - HEAVY DUTY ANTICORROSIVE PAINTS FOR METAL STRUCTURES

HEAVY DUTY ANTICORROSIVE PAINTS FOR METAL STRUCTURES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 5 Table 2 (Please see Annexure)	30000.0

722

IS 16676 (2017) - Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification

Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Vii (Solvent Rub Test)	1200.0
Vi (Cathodic Disbondment Test, Max)	2000.0
V (Abrasion Resistance, Max)	2000.0
IV (c) (Immersion & vapour phase c) Sodium hydroxide pass 1 percent by weight)	2000.0
IV (b) (Immersion & vapour phase b) Sulphuric acid pass 1 percent by weight.)	2000.0
IV (a) (Immersion & vapour phase a) De-ionized water)	2000.0
III (a) (Adhesion Test a)Tape Test)	1200.0
III (b) (Adhesion Test b)Pull off Test.)	2500.0
II (Electrical insulation (holidays))	2500.0
6.7 Table 1 I (Thickness, dry film, Min)	1200.0
6.6 (Keeping Properties)	2500.0
6.5 (Consistency)	1200.0
6.4 (Recoating Properties)	1200.0
6.3 (Application Properties)	1200.0
6.2 (Thinning)	1200.0
6.1 (Condition)	1200.0

723

JIS K 5659:2018 (2018) - LONG DURABLE PAINTS FOR STEEL STRUCTURES

LONG DURABLE PAINTS FOR STEEL STRUCTURES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 5 Table 2 Top Coat Type A (Please see Annexure)	40000.0
Clause 5 Table 2 Intermediate CoatType A (Please see Annexure)	40000.0
Clause 5 Table 2 Top Coat Type B (Please see Annexure)	1.0
Clause 5 Table 2 Type B Intermediate Coat (Please see Annexure)	1.0
5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES ( ZINC RICH PRIMER) TYPE A (Please see Annexure)	55000.0
5 Table 2 (LONG DURABLE PAINTS FOR STEEL STRUCTURES( Intermediate) TYPE A (Please see Annexure)	45000.0
5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES (Undercoat) TYPE A (Please see Annexure)	20000.0
5 Table 2 LONG DURABLE PAINTS FOR STEEL STRUCTURES( FINISH) TYPE A (Please see Annexure)	50000.0

724

IS 12894 (2002) - Pulverized fuel ash - Lime bricks - Specification

Pulverized fuel ash - Lime bricks - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Drying Shrinkage)	2000.0
7.3 (Efforescence)	1000.0
7.4 (Water Absorption)	1000.0
7.1 (Crushing Strength)	2000.0
5 (Dimensions)	500.0
3 (General quality)	500.0

725

RDSO/M&C/RP-198 (2006) - COMPOSITE GROOVED RUBBER SOLE PLATES FOR PLACING BENEATH RAILS

COMPOSITE GROOVED RUBBER SOLE PLATES FOR PLACING BENEATH RAILS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Hardness)	1000.0
3.2 (Compression Set)	3000.0
3.2 (Relaxed Modulus at 100% elongation before ageing)	1000.0
3.2 (Tension Set)	3000.0
3.2 (Electrical Resistance after immersion)	5000.0
3.2 (Electrical Resistance Before immersion)	5000.0
3.2.2 (Ash Content)	2000.0
3.2.2 (Specific Gravity)	1000.0
3.2 (Relaxed Modulus at 100% elongation, Change after ageing)	1000.0
3.2 (Elongation at break, Before ageing)	1500.0
3.2 (Elongation at Break, After ageing)	1500.0
3.2 (Elongation at Break, Retention after ageing)	1000.0
3.2 (Tensile Strength, Before ageing)	1500.0
3.2 (Tensile Strength, After ageing)	1500.0
3.2 (Tensile Strength, Retention after Ageing)	1000.0
3.1.3 (Thickness of Composite Pad)	1000.0

726

IS 2202 : Part 1 (2023) - Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.15 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998)	1500.0
11.14 (Glue Adhesion Test-IS 4020 (Part 15):1998 for BWP and (60± 2)°C for MR)	1000.0
11.13 (Knife test-IS 4020 (Part 14):1998)	1000.0
11.12 (End Immersion Test-IS 4020 (Part 13):1998 for BWP and 3cycle for MR)	1000.0
11.11 (Varying Humidity Test-IS 4020 (Part 12):1998)	3000.0
11.10 (Misuse Test-IIS 4020 (Part 11):1998)	1000.0
11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998)	1000.0
11.8 (Buckling Test-IS 4020 (Part 9):1998)	1500.0
11.7.1 and 11.7.2 (Shock Resistance test- Cl 2.1 & 3.1 of IS 4020 (Part 8):1998)	1500.0
11.6 (Edge loading test-IS 4020 (Part 7):1998)	1500.0
11.4 (Impact Indentation-IS 4020 (Part 5):1998)	1000.0
11.3 (Local planeness Test-IS 4020 (Part 4):1998)	1000.0
11.2 (General Flatness-IS 4020 (Part 3):1998)	1000.0
11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998)	2000.0
9 (Workmanship and Finish-IS 2202 (Part 1):1999)	1000.0

727

RDSO/2007/GE:0014 November 2009 (November 2009) - Guidelines and Specifications for Design of Formation for Heavy Axle Load (RDSO/2007/GE:0014 )

Guidelines and Specifications for Design of Formation for Heavy Axle Load (RDSO/2007/GE:0014 )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1(i-a) (The uniformity coefficient (Cu) IS 2720-1 (1983)/IS 1498 (1970))	1500.0
12.1.(i-b) (The Coefficient of Curvature (Cc) IS 2720-1 (1983)/IS 1498 (1970))	1500.0
12.1.(ii) (Los Angeles Abrasion Value (IS 2386(4):1963))	1500.0
12.1(iv) (OMC & MDD (Proctor Test) [IS 2720 (Part 8)])	5000.0
12.2 (Sieve Analysis/Grading Percentage /Grain size distribution [IS 2720 (Part 4)])	5000.0
- (Liquid Limit [IS 2720-5(1985)])	1000.0
- (Plastic limit [IS 2720-5(1985)])	1000.0
- (Shrinkage limit [IS 2720-6 (1972)])	1000.0
12.1.iv) (CBR value (Soaked))	6000.0

728

IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Equivalent Cube Strength of core samples with preparation, N/mm^2)	5000.0

729

Custom-16-ER-LM - IV Pole for ICU Beds

IV Pole for ICU Beds

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Outside Diameter)	1000.0
5 (Thickness)	1000.0
6 (Carbon)	500.0
7 (Manganese)	500.0
8 (Sulphur)	500.0
9 (Phosphorus)	500.0
10 (Bend Test)	1000.0
11 (Hardness Test)	2000.0

730

Custom-15-ER-LM - Metal Frame of TREATMENT COUCH

Metal Frame of TREATMENT COUCH

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

731

Custom-14-ER-LM - Metal Frame/Metal Sheet of of LOCKERS

Metal Frame/Metal Sheet of of LOCKERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

732

Custom-13-ER-LM - Metal Frame of PATIENT CARE BEDS/Motorized & Semi-Motorized ICU BED

Metal Frame of PATIENT CARE BEDS/Motorized & Semi-Motorized ICU BED

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

733

Custom-12-ER-LM - Metal Frame/Metal Sheet of ALMIRAH

Metal Frame/Metal Sheet of ALMIRAH

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

734

Custom-11-ER-LM - Metal Frame of WAITING CHAIR 03 SEATER

Metal Frame of WAITING CHAIR 03 SEATER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

735

Custom-10-ER-LM - SEMI-MOTORIZED ICU BED

SEMI-MOTORIZED ICU BED

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	1000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

736

Custom-9-ER-LM - MOTORIZED ICU BED

MOTORIZED ICU BED

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Yield Point or Proof Stress)	1000.0
2 (Tensile Strength)	1000.0
3 (Elongation)	1000.0
4 (Thickness)	1000.0
5 (Bend Test)	1000.0
6 (Hardness Test)	2000.0
7 (Cupping Test)	3000.0
8 (Carbon)	500.0
9 (Manganese)	500.0
10 (Sulphur)	500.0
11 (Phosphorus)	500.0
12 (Powder Coating Thickness)	2000.0

737

IS 710 (2010) - Marine Plywood -Specification

Marine Plywood -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.6 (Static Bending Strength-IS 1734 (Part 11):1983)	3000.0
9.1.7 (Wet Bending Strength-IS 710:2010 & IS 1734 (Part 11):1983)	3000.0
9.1.5 (Mycological Test-Observation, Glue Shear Strength and Adhesion of Plies- IS 1734 (Part 7, 4 & 5):1983)	2500.0
9.1.4 (Tensile Strength-IS 1734 (Part 9):1983)	2500.0
9.1.3.1.2 (Water Resistance Test-Adhesion of Plies-IS 710:2010 & IS 1734 (Part 5):1983)	1000.0
9.1.3.1.1 (Water Resistance Test-Glue Shear Strength-IS 710:2010 & IS 1734 (Part 4):1983)	2500.0
9.1.2.2 (Glue Adhesion in Dry State-Adhesion of Plies in dry state-IS 1734 (Part 5):1983)	1000.0
9.1.2.1 (Glue Adhesion in Dry State-Glue Shear Strength-IS 1734 (Part 4):1983)	2000.0
7 (Workmanship & Finish-IS 710:2010)	1000.0
6 (Dimensions-IS 710:2010, Annex B)	1000.0
9.1.1 (Moisture content-IS 1734 (Part 1):1983)	1000.0

738

IS 710 (2010) - Marine plywood - Specification (Second Revision)

Marine plywood - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

739

CQA(HV)/QAI/66/001/ELECTROMAGNET (1989) - Quality Assurance Instruction for Electromagnet

Quality Assurance Instruction for Electromagnet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.5.2 (Insulation Resistance Test)	6000.0
12.5.5 (Moisture Resistance Test)	30000.0
12.5.6 (Cold Resistance Test)	10000.0
12.5.7 (Thermal Stability Test)	10000.0
12.5.9 (Frost & Dew Resistance Test)	10000.0
12.5.12 (Vibration Strength Test)	10000.0

740

IS 513 : Part 2 (2016) - Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Yield stress)	1000.0
7.1 (Tensile strength)	1000.0
7.1 (% Elongation)	1000.0
7.2 (Bend Test)	1000.0
10 (Thickness)	1000.0
6 (Chemical composition (Carbon))	625.0
6 (Chemical composition (Manganese))	625.0
6 (Chemical composition (Sulphur))	625.0
6 (Chemical composition (Phosphorus))	625.0

741

Custom Specification ER Starch - Testing method for starch (Customer specification)

Testing method for starch (Customer specification)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Starch content)	1500.0

742

ASM Hand Book Vol 9 (1992) - Metallography and Microstructures

Metallography and Microstructures

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASM Vol. 9 (Microstructure Analysis)	3000.0
ASM Vol. 9 (Grain Size)	3000.0
ASM Vol. 9 (Examination of Macrostructure)	2000.0

743

Custom-8-ER-LM - Automatic Come Along Clamp

Automatic Come Along Clamp

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Breaking Load)	5000.0

744

IRS-GE-1 (2016) - Specifications for Track ballast (IRS-GE-1)

Specifications for Track ballast (IRS-GE-1)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.2.1 (Aggregate abrasion Value (IS 2386(IV):1963))	2500.0
2.2.2 (Aggregate Impact Value (IS 2386(Part IV):1963))	2500.0
2.2.3 (Water absorption ( IS 2386 (III):1963))	1000.0
2.3 (Size and Gradation (as per annexure IV of IRS-GE-1,June 2016))	2000.0

745

IRS-GE-I, JUNE-2016 (2016) - SPECIFICATIONS FOR TRACK BALLAST

SPECIFICATIONS FOR TRACK BALLAST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.3 (Size and Gradation (IRS-GE-I, JUNE-2016))	2000.0
2.2.3 (Water absorption (IS 2386 (Part III):1963))	1000.0
2.2.1 (Aggregate abrasion value-Annexure I of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0
2.2.2 (Aggregate Impact Value-Annexure II of IRS- GE-I, June 2016 & IS 2386 (Part IV):1963)	1500.0

746

IS 1838 : Part 1 (1983) - preformed fillers for expansion joint in concrete pavement and structures (non extruding and resilient type): Part 1 Bitumen impregnated fibre - Specification

preformed fillers for expansion joint in concrete pavement and structures (non extruding and resilient type): Part 1 Bitumen impregnated fibre - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dimensions)	500.0
4.1(b) (Width)	1000.0
4.1(c) (Thickness)	1000.0
5.1(i) (Resistance to handling)	1000.0
5.1(ii) (Recovery)	1000.0
5.1(iii)a (Compression)	1000.0
5.1(iv) (Extrusion)	1000.0
5.1(v) (Water Absorption)	1000.0
5.1(vi) (Density)	1000.0
5.1(vii) (Bitumen Content)	2000.0
5.1(Viii)a (Weathering)	5000.0
5.1(viii)b.1 (Recovery Test After Weathering)	1000.0
5.1(viii)b.2 (Compression Test after Weathering)	1000.0
5.1(viii)b.3 (Extrusion after weathering)	1000.0
5.1(iii)b (Loss in Bitumen)	1000.0

747

IS 2185 : Part 3 (1984) - Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.6 (Drying Shrinkage, in %)	1000.0
8.4 (Compressive Strength, in N/mm²)	12000.0
8.3 (Block Density, kg/m³)	1000.0
8.2 (Dimensions (Length, width and thickness))	3000.0
8.1 (General )	500.0

748

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Nominal Mass)	1500.0
6.1 (Nominal Area )	1000.0
6.1 (Nominal Diameter )	1000.0
6.2.3 (Elongation)	1000.0
6.2.2 (0.2% Proof Load)	1000.0
6.2.2 (Breaking Strength)	3000.0
4.2 (Length of lay for dia 15.2mm)	500.0
6.2 (Length of lay of Strand- IS 14268: 2022.)	1000.0
4.2 (Nominal mass of strand)	1000.0
4.2 (Length of lay of 9.5 mm strand)	1000.0
4.5 (Visual observation)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
4.1 (Phosphorus, % by mass)	600.0
4.1 (Sulphur, % by mass)	600.0
4.5 (Workmanship and Finish)	1000.0
6.2 (Length of lay of Strand- IS 14268: 2022.)	1000.0
6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.)	3000.0
6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.)	1000.0
6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.)	1000.0
6.1 (Nominal Diameter of strand- IS 14268: 2022.)	1000.0
4.1.2 (Carbon (As per IS 7904:2018))	500.0
4.1.2 (Sulphur (As per IS 7904:2018))	500.0
4.1.2 (Phosphorus (As per IS 7904:2018))	500.0
4.1.2 (NIckel (As per IS 7904:2018))	500.0
4.1.2 (Chromium (As per IS 7904:2018))	500.0
4.1.2 (Manganese (As per IS 7904:2018))	500.0
4.1.2 (Silicon (As per IS 7904:2018))	500.0
4.1.2 (Copper (As per IS 7904:2018))	500.0
4.1.2 (Molybdenum (As per IS 7904:2018))	500.0
4.1.2 (Aluminium (As per IS 7904:2018))	500.0
4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018))	500.0

749

IS 6746 (1994 RA 2020) - UNSATURATED POLYESTER RESIN SYSTEM

UNSATURATED POLYESTER RESIN SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Appearence)	1200.0
4.1(i) Table 1 (Viscosity at 25 Deg C by Brookfield viscometer)	2000.0
4.1 (ii) table 1 (Acid Value mgKOH/gm)	1200.0
4.1 (iii) table 1 (Volatile Content,% by mass)	1200.0
4.1 (iv) table 1 (Gel time at 25 Deg.C)	1500.0
4.2 (ii) (Relative Density at 27 deg C)	1200.0
4.2 (iii) (Refractive Index at 25 Deg C)	1000.0

750

IS 16532: 2017 (2017) - APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

APP Modified Bituminous Waterproofing and Damp Proofing Membrane with Polyester Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6..0 (Thickness)	1000.0
6.0 (Cold Flexibility)	2000.0
6.0 (Softening Point)	1000.0
6.0 (Tear Strength in longitudinal direction)	1000.0
6.0 (Tear Strength in transverse direction)	1000.0
6.0 (Elongation in longitudinal direction)	2000.0
6.0 (Elongation in transverse direction)	2000.0
6.0 (Tensile strength in longitudinal direction)	1000.0
6.0 (Tensile Strength in transverse direction)	1000.0