NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- nthsal-wb[at]nic[dot]in

Scope List

Reset

1145 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

751

ASTM A537 (2013) - SPECIFICATION FOR PRESSURE VESSEL PLATES,HEAT-TREATED, CARBON-MANGANESE-SILICON STEEL

SPECIFICATION FOR PRESSURE VESSEL PLATES,HEAT-TREATED, CARBON-MANGANESE-SILICON STEEL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Carbon)	500.0
6 (Manganese)	500.0
6 (Phosphorus)	500.0
6 (Sulfur)	500.0
6 (Silicon)	500.0
6 (Copper)	1000.0
6 (Nickel)	1000.0
6 (Chromium)	1000.0
6 (Molybdenum)	1000.0
7 (Tensile strength)	2000.0
7 (Yield strength)	1000.0
7 (Elongation in 50 mm)	1000.0
S5 (Charpy V-Notch Impact Test at 0 Deg. C)	4000.0

752

IS 5986 (2017) - Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes

Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Tensile Strength)	2000.0
8 (Yield Stress)	1000.0
0 (Mass of Zinc Coating as per IS 4759)	2000.0
8 (Percentage Elongation)	1000.0
9.2.2 (Bend Test)	1500.0
10 (Impact Test)	2000.0
15 (Dimension)	1000.0
7 (Carbon)	500.0
7 (Sulphur)	500.0
7 (Phosphorus)	500.0
7 (Carbon Equivalent)	1000.0
7 (Manganese)	500.0
7 (Silicon)	500.0
7 (Chromium)	1000.0
7 (molybdenum)	1000.0
7 (Nickel)	1000.0
0 (Uniformity of Coating as per Is 2633)	1000.0

753

Custom Scool Bag Test NTH(ER)-2022 (2022) - Custom Scool Bag Test NTH(ER)-2022

Custom Scool Bag Test NTH(ER)-2022

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Front Length)	500.0
1.1 (Width)	500.0
1.2 (Bottom)	500.0
1.3 (Cloth)	500.0
1.4 (Front Pocket Size)	500.0
1.5 (Front Pocket Bottom width)	500.0
1.6 (No. of water Bottle)	500.0
1.7 (Water bottle size with elastic)	500.0
1.8 (Zip Nos.)	500.0
1.9 (Runners)	500.0
1.10 (shoulder pads)	500.0
1.11 (Clips)	500.0
1.12 (Handle)	500.0
1.13 (Partition Cloth)	1000.0
1.14 (Nawar)	1000.0
1.15 (Logo & Photo)	500.0
1.16 (Drop Test)	1000.0
1.17 (Snatch Test)	1000.0
1.18 (GSM of Fabric)	1000.0

754

IS 4000 (1992) - Code for practice for High strength bolts in steel structures

Code for practice for High strength bolts in steel structures

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4.1 (Slip Factor - Surface Not Treated - consideration of 3 Specimens)	18000.0

755

Customer Specification NTH ER Paint QUV 2022 (2022) - Customer Specification NTH ER Paint QUV Test 2022

Customer Specification NTH ER Paint QUV Test 2022

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (UV exposure test (for 08 Hrs) Irradiance:0.63W/m2 Temp :60 Deg)	3500.0
2 (Temperature Durability test for 16 hrs. (08 Hours at minus 30 Deg C followed by 08 Hours at plus 70 deg C))	10000.0

756

ISO 10675-1 (2016) - Non-destructive Testing of Welds-Acceptance levels for radiographic testing- Part 1: Steel, nickel, titanium and their alloys

Non-destructive Testing of Welds-Acceptance levels for radiographic testing- Part 1: Steel, nickel, titanium and their alloys

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Radiographic Testing of Butt Welds)	3000.0

757

IS 1730 (1989) - Dimensions for steel plates,sheets strips and flats for general engineering purposes

Dimensions for steel plates,sheets strips and flats for general engineering purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

758

ER-LP-Intensity-01 - Peak Intensity measurement at different Mode.

Peak Intensity measurement at different Mode.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Peak Intensity measurement at Single Mode, on the lines of IS - 16106 : 2012)	10000.0
A2 (Peak Intensity measurement at Dual Mode , on the lines of IS - 16106 : 2012)	20000.0
A3 (Peak Intensity measurement at Triple Mode , on the lines of IS - 16106 : 2012)	30000.0

759

CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER (2022) - CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER ASIAN PAINTS

CUSTOMER SPECIFICATION CHEMICAL PAINT NTH ER ASIAN PAINTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Specific Gravity)	1000.0
2 (Volume solids ,% by mass)	1000.0
3 (Zinc content,% by mass)	1500.0
4 (Drying time ,Touch Dry)	500.0
5 (Drying time Full cure)	500.0
6 (Adhesion Test (cross-cut))	700.0
7 (Adhesion Pull Off (ASTM D 4541))	4000.0
8 (Storage stability (pot life))	2000.0

760

IRC-83 (1987) - Elastomeric Bearings

Elastomeric Bearings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
915.1 (Identification of polymer)	3000.0
915.1.3(i) (Ash Content)	2000.0
915.13(ii) (Polychloroprene Conetnt)	4000.0
915.2(1.1) (Hardness)	1000.0
915.2(1.2) (Tensile Strength)	2000.0
915.2(1.3) (Elongation at Break)	1000.0
915.2(2) (Compression set)	3000.0
915.2(3.1) (Change in Hardness)	2000.0
915.2(3.2) (Change in Tensile Strength)	3000.0
915.2(3.3) (Change in Elongation)	1000.0
915.2.2 (Adhesion Strength of Elastomer to Laminate)	3000.0
916.2.2(iii) (Thickness of individual elastomer layer)	1000.0
916.2.2(iv) (Thickness of Outer Layer)	1000.0
916.2.2(v) (Number of Internal Layers of Elastomer)	500.0
916.2.2(vii) (Thickness of Steel Laminates)	500.0
12.0 (Ultimate Compressive strength)	6000.0

761

RDSO SPEC/E. NO. SPEC/E-7/17-REV1 (2004) - Resin Pre-Impregnated Semi-Cured Unidirectional Glass Banding Tape

Resin Pre-Impregnated Semi-Cured Unidirectional Glass Banding Tape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Identification of Resin)	5000.0

762

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103) (1991 RA 2018) - Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

Customer Specification NTH ER CONCRETE ADMIXTURES (IS 9103)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (i) (Dry material content % by mass)	1000.0
9 (ii) (Ash Content % by mass)	1000.0
9(iii) (Relative density)	1000.0
9 (iv) (Chloride ion content % by mass)	1000.0
9 (v) (PH)	1000.0

763

Custom-7-ER-LM - Galvanized Steel Rope Net Wire

Galvanized Steel Rope Net Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Breaking Force of Rope)	3000.0
2 (Punching Resistance of Steel Wire Rope Net)	2000.0
3 (Rope Size)	1000.0
4 (Mass)	1500.0
5 (Mass of Zinc Coating)	2000.0
6 (Carbon)	500.0
6 (Sulphur)	500.0
6 (Phosphorus)	500.0
6 (Manganese)	1000.0
6 (Silicon)	1000.0
7 (Tensile Strength of Element wire)	3000.0

764

IS/IEC 60529,IS 16102 & LM79 - Light Candela Test Ingress of protection IP-65 Light test as per IS 16102

Light Candela Test Ingress of protection IP-65 Light test as per IS 16102

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Light Candela test on LED Aviaton Obstruction Light)	10000.0
2 (Ingress of Protection IP-65 Test as per IS/IEC 60529)	15000.0
3 (Light Test as Per IS 16102)	20000.0

765

ISTA 1G - Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS

Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ISTA 1G (Random Vibration Test on the lines of ISTA-1G non operational with Packing of 6 kVA UPS Overall Grms level of 1.15 Face 3 on Table surface for 30 min Face 1 on table surface for 10 min. Face 2 or 4 on table surface for 10 minutes Face 5 or 6 on table surface for 10 min.)	20000.0
ISTA 1G (Drop Test On the lines of ISTA 1G Specification)	10000.0

766

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0
7 (Dimension)	1000.0
9.1 (Tensile Strenth)	2000.0
9.1 (0.2% Proof Stress)	1000.0
9.1 (Elongation)	1000.0

767

Custom-6-NTH-LM - G.I Welded Wire Mesh

G.I Welded Wire Mesh

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Weld Shear Test of Wire Mesh)	2000.0
2 (Tensile Strength of G.I Wire)	1500.0
3 (Mass of Zinc Coating of G.I Wire)	2000.0
4 (Weld Penetration)	2000.0
5 (Yield Strength of G.I Wire)	1500.0
6 (Dimension)	4000.0
7 (Tensile strength of Galvanized steel Longitudinal wire)	1000.0
8 (Yield stress of Galvanized steel Longitudinal wire)	1000.0
9 (Percentage of Area Reduction of G.I Wire)	1500.0
10 (Bend Test of G.I Wire)	1000.0
11 (Tensile strength of Galvanized steel Transverse wire)	1000.0
12 (Yield stress of Galvanized steel Cross wire)	1000.0
13 (Percentage of Area Reduction of Galvanized steel Transverse wire)	1000.0
14 (Bend Test of Galvanized steel Cross wire)	1000.0
15 (Mass of Zinc Coating of Galvanized steel Longitudinal wire)	2000.0
16 (Mass of Zinc Coating of Galvanized steel Transverse wire)	2000.0
17 (Carbon)	500.0
18 (Sulphur)	500.0
19 (Phopshorus)	500.0
20 (Manganese)	500.0
21 (Silicon)	500.0

768

MMDTS 19021 (2020) - Schedule of Technical Requirements for Fire Barrier Cloth for Seats and Berths Meeting FST(Fire Smoke and Toxicity) Properties to EN45545 HL3 for Passenger Coaches.

Schedule of Technical Requirements for Fire Barrier Cloth for Seats and Berths Meeting FST(Fire Smoke and Toxicity) Properties to EN45545 HL3 for Passenger Coaches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.5.1.1 (Weight)	1000.0
2.5.1.2 (Thickness)	1000.0
2.5.1.3a (Tensile Strength,CD)	1000.0
2.5.1.3b (Tensile strength,MD)	1000.0
2.5.1.4a (Tear Resistance,CD)	1000.0
2.5.1.4b (Tear Resistance,MD)	1000.0
2.5.1.5a (Elongation at 100 N,CD)	500.0
2.5.1.5b (Elongation at 100 N,MD)	500.0

769

NTHER calibration of 3.5 digit Multi Function Calibrator - Calibration of 3.5 digit Multi-Function Calibrator

Calibration of 3.5 digit Multi-Function Calibrator

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Voltage, Current and Resistance)	5000.0
A.2 (Voltage, Current and Resistance)	6000.0
A.3 (Voltage, Current and Resistance)	7000.0
A.4 (Voltage, Current and Resistance)	15000.0
A.5 (Capacitance)	2000.0
A.6 (Frequency)	2000.0
A.7 (Temperature)	5000.0

770

NTHER Calibration of Power Analyzer - Calibration of Power Analyzer

Calibration of Power Analyzer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Voltage, Current, Power Factor and Power)	4500.0
A.2 (Voltage, current, Power factor and Power)	6000.0

771

NTH ER Calibration of Single Phase wattmeter - Calibration of Single Phase wattmeter

Calibration of Single Phase wattmeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC/DC Power)	1200.0
A.2 (AC/DC Power)	1500.0

772

On the lines of IS: 13875 (Part-I) - 1993 & V/I method - Calibration of Relay Test Set

Calibration of Relay Test Set

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (sec.)	1200.0
A2 (V,A,sec)	3500.0

773

NTH/HV/01 - Calibration of High Voltage Test Set

Calibration of High Voltage Test Set

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (kV,mA)	1500.0
A2 (kV,mA)	2000.0
A3 (kV,mA)	3000.0
A4 (kV,mA)	3500.0
A5 (kV,mA)	4000.0
A6 (kV,mA)	5000.0
A7 (kV,mA)	6000.0
A8 (kV,mA)	7000.0
A9 (kV,mA)	8000.0
A10 (kV,mA)	10000.0

774

Custom Specification ER Plastic (2022) - Custom Specification ER Plastic

Custom Specification ER Plastic

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Thickness)	1000.0
2 (Length in meter)	1000.0
3 (GSM)	1000.0
4 (Identification of Polymer)	4000.0
5.0 (Tensile Strength at Break)	2000.0
6.0 (Elongation at Break)	1000.0
7.0 (Specific Gravity)	1000.0
8.0 (Water Absorption ( Kept in water for 4 hrs.))	1000.0
9.0 (Melting Point)	1000.0
10.0 (Inherent Viscosity)	2000.0
11.0 (Hardness(Shore D))	1000.0
12.0 (Compressive Strength(At a pressure of 10 Mpa))	2000.0
13.0 (Compressive Strength (At a pressure of 18 Mpa))	2000.0
14. (Flammability - IS:11731(Part-1)FH Method)	5000.0
15. (Flammability - IS 11731(Part-2)FV Method)	5000.0
16 (Notch Impact Strength)	2000.0
17 (Tensile Modulus)	2000.0
18 (Fire Behaviour)	5000.0
19 (Colour Resistance to Xenon Exposure(192 hrs))	9600.0
20 (Flammability Test)	5000.0
21 (Flexural Strength)	2000.0
22 (Resistance to HCL(10%) 7-days at room temp.)	2000.0
23 (Resistance to Sulphuric Acid(10%) 7-days at room temp.)	2000.0
24 (Resistance to Sodium Hydroxide(10%)7-days at room temp.)	2000.0
25 (Resistance to Ammonium Hydroxide(10%)7-days at room temp.)	2000.0
26 (Resistance to Sodium Chloride(10%)7-days at room temp.)	2000.0
27 (Resistance to Petrol 7-days at room temp.)	2000.0
28 (Resistance to Lime Water 7-days at room temp.)	2000.0
29 (Tear Strength)	3000.0
30 (Low Temperature bend(-2 deg.C))	2000.0
31 (Linear Dimensional Change)	2000.0
32 (Puncture Resistance)	2000.0
33 (Resistance under Water Pressure)	2000.0
34 (Hardness (Shore A))	1000.0
35 (Dimension)	1000.0
36 (Physical Appearance)	1000.0
37 (Bulk Density)	1000.0
38 (Ash Content)	2000.0
39 (Compressive Strength)	2000.0
40 (Unnotched Impact Strength)	2000.0
41 (Dielectric Strength)	10000.0
42 (Thickness Nominal)	1000.0
43 (Thickness Lowest)	1000.0
44 (Melt Flow Index)	2000.0
45 (Tensile Strength)	2000.0
46 (Elongation (%))	1000.0
47 (Dimensional Stability after warm storage for 1hr/100 deg.C)	2000.0
48 (Puncture Resistance)	2000.0
49 (Peel Adhesion Test)	2000.0
50 (Tacking Test)	2000.0
51 (Mass per unit Area)	1000.0
52 (Compressive Strength (N/sq.mm) at 20% deflection.)	2000.0
52 (Strength of welded seam)	2000.0
53 (Change in Tensile strength after ageing (80 deg. C for 7 days).)	3000.0
54 (Change in Elongation at break (80 deg. C for 7 days).)	1000.0
55 (Dimensional stability (80 deg. C for 7 days).)	2000.0
56 (General appearance (80 deg. C for 7 days).)	1000.0
57 (Constant Pressure head of water of 900 mm.)	2000.0
58 (Water absorption in 7-days.)	2000.0
59 (Light Transmission)	2000.0
60 (60 degree Gloss)	1000.0
61 (Whiteness Index (Reflective))	1000.0
62 (Substrate)	2000.0
63 (Film Color)	500.0
64 (Adhesive)	500.0
65 (Adhesive Color)	500.0
66 (Liner)	3000.0
67 (Typical Adhesion 24 hours after application)	1000.0
68 (Chemical Resistance)	3000.0
69 (Finish)	500.0
70 (Hardness)	1000.0
71 (Heat aging (At 150 deg.C for 30 min.))	2000.0
72 (Compressive Strength)	2000.0
73 (Size)	1000.0
74 (Height)	1000.0
75 (Weight)	1000.0
76 (Water Absorption Test)	2000.0
77 (Bulk factor)	1000.0
78 (Flexural Modulus of Elasticity)	2000.0
79 (Bursting Strength)	2000.0
80 (Bending Test)	2000.0
81 (Fire Retardancy Test)	5000.0
82 (Self Extinguishing Test)	5000.0
83 (Volume Resistivity)	5000.0
84 (Tensile Strength before UV exposure)	2000.0
85 (UV exposure for 1000 hours)	50000.0
86 (Tensile Strength after UV exposure)	2000.0

775

IS 8427 (1989) - Agricultural Produce Milling Machinery - Rubber Roll for Paddy Dehusker - Specification (First Revision)

Agricultural Produce Milling Machinery - Rubber Roll for Paddy Dehusker - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1(i) (Outer Diameter)	1000.0
5.1(ii) (Inner Diameter)	1000.0
5.1(iii) (Length)	1000.0
5.1(v) (Key Dimension)	1000.0
5.1(iv) (No of Keys)	1000.0
5.2(i) (Outer Diameter)	1000.0
5.2(ii) (Inner Diameter)	1000.0
5.2(iii) (Length)	1000.0
6.1 (Tensile Strength)	2000.0
6.2 (Elongation)	1000.0
6.3 (Hardness)	1000.0
6.4 (Change in Hardness at 90+/-2 deg.C for 2 hrs.)	2000.0
6.5(i) (Abrasion Resistance)	2000.0
Firm's request. (Adhesion Strength)	2000.0

776

AISI 304 STAINLESS STEEL 304 (2022) - AISI 304 STAINLESS STEEL 304

AISI 304 STAINLESS STEEL 304

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon as C,% by mass)	700.0
2 (Silicon as Si ,% by mass)	700.0
3 (Manganese as Mn % by mass)	700.0
4 (Phosphorus as P, % by mass)	700.0
5 (sulphur as S,% by mass)	700.0
6 (Chromium as Cr % by mass)	800.0
7 (Nickel as Ni % by mass)	700.0

777

EURAMET cg - 2 (2011) - CALIBRATION OF GAUGE BLOCK COMPARATORS

CALIBRATION OF GAUGE BLOCK COMPARATORS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Length)	15000.0

778

ASTM D2240 (2015) - Standard Test Method for Rubber Property—Durometer Hardness

Standard Test Method for Rubber Property—Durometer Hardness

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Force)	5000.0

779

ASTM D88 (1994) - Standard Test Method for Saybolt Viscosity

Standard Test Method for Saybolt Viscosity

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimension)	5500.0

780

SANAS TR 45-03 (2023) - CRITERIA FOR LABORATORIES ACCREDITED TO CALIBRATE TACHOMETERS AND MEASURE ROTATIONAL SPEED

CRITERIA FOR LABORATORIES ACCREDITED TO CALIBRATE TACHOMETERS AND MEASURE ROTATIONAL SPEED

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Speed)	2500.0