NTH - Management Information System

National Test House (SR), Chennai

CSIR Road, Tharamani, Chennai - 600113, Chennai, Chennai, Tamil Nadu, 600113

9444380435 directornthsr[at]nth[dot]gov[dot]in

Scope List

Reset

487 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

271

CUS/SR/MECH-15 - Dimensional measurement

Dimensional measurement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Dimensions)	1200.0
1.2 (Dimensions)	3000.0

272

RFP-1/NA-S - Note Authenticator Cum Sorting Machines

Note Authenticator Cum Sorting Machines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Performance and verification for Note Authenticator Cum Sorting Machine(1+1))	35000.0

273

IEC 62040 (2011) - Method of specifying the performance and test requirements

Method of specifying the performance and test requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Performance check (1kVA))	10000.0
1 (Performance check(3kVA))	12500.0
1 (Performance check (5kVA))	12500.0
1 (Performance check(10kVA))	25000.0
1 (Performance check (20 KVA))	40000.0

274

Gravel Resistivity Measurement On lines of SFQP Power Grid Specification & Customer Specification - 20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification

20/40 Stone Aggregates Gravel Resistivity Measurement as per SFQP “Switchyard Civil works doc.no. C/QA&I/SFQA/SCW, Rev-04 dated 29.01.2016 and Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Description of Sample)	1.0
2 (Sample Marking Provided on Sample)	1.0
3 (Gravel Resistivity Measurement (as per Customer Specification))	20000.0

275

Customer Specification - Lightning Impulse Voltage - Lightning Impulse Voltage Test on HV Bushings - Customer Specification

Lightning Impulse Voltage Test on HV Bushings - Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Lightning Impulse test Full wave - Customer Specification (Lightning Impulse test Full wave on HV Bushings - Customer Specification)	10500.0
Lightning Chopped Impulse test - Customer Specification (Lightning Chopped Impulse test on HV Bushings - Customer Specification)	13000.0
3 (Dielectric Test on Tap Changer - Lightining Impulse , Chopped Impulse and High Voltage Test)	122500.0
Lightning Impulse test (Lightning Impulse test Full wave)	15000.0

276

NTH/WI/MC (on the lines of IS 4169) 10 (2019) - Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (30 kN to 50 kN).

Metallic Materials - calibration of force-proving instruments used for the verification of uniaxial testing machines (30 kN to 50 kN).

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Force (30 kN to 50 kN))	10000.0

277

Raincoat (Unisex)-Custom (2022) - TNTB Tech. Specification for Raincoat (Unisex)

TNTB Tech. Specification for Raincoat (Unisex)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A to C (Test results)	8500.0

278

IS 7291 (1981) - Specification for high speed tool steels (First Revision)

Specification for high speed tool steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Carbon)	500.0
5 (Silicon)	500.0
5 (Manganese)	500.0
5 (Chromium)	500.0
5 (Molybdenum)	500.0
5 (Vanadium)	500.0
5 (Tungsten)	500.0
5 (Cobalt)	500.0
5 (Sulphur)	500.0
5 (Phosphorus)	500.0

279

IS 14246 (2024) - Continuously Pre-Painted Galvanized Steel Sheets and Strips

Continuously Pre-Painted Galvanized Steel Sheets and Strips

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Bend Test)	1000.0
6.3 (Pencil Hardness Test)	1000.0
6.4 (Impact Resistance Test)	1000.0
9 (Mass of Sheet)	1000.0
4.2 (Mass of Zinc Coating)	2000.0
4 (Tensile strength, MPa)	1000.0
4 (Yield Stress, MPa)	1000.0
4 (% Elongation)	1000.0

280

IS 6012 (1992) - Measurement of coating thickness by eddy current method (First Revision)

Measurement of coating thickness by eddy current method (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 6012 (Coating thickness)	2000.0

281

IS 1501 (1996) - Metallography examination - Micro hardness test

Metallography examination - Micro hardness test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1501 (Micro Vicker Hardness)	3000.0

282

IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.6 (Microstructure)	3000.0
7.5 (Carbon (C))	500.0
7.5 (Manganese (Mn))	500.0
7.5 (Silicon (Si))	500.0
11.2 (Phosphorus (P))	500.0
11.2 (Tin (Sn))	500.0
11.2 (Copper (Cu))	500.0

283

ASTM D 2370 - Standard Test Method for Tensile and Elongation Properties

Standard Test Method for Tensile and Elongation Properties

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile strength and Elongation at break)	2000.0
- (Elongation at break)	2000.0

284

IS 516 : Part 5 : Sec 1 (2018) - Hardened Concrete -Methods of Test Part 5 Non-destructive Testing of Concrete Section 1 Ultrasonic Pulse Velocity Testing ( First Revision )

Hardened Concrete -Methods of Test Part 5 Non-destructive Testing of Concrete Section 1 Ultrasonic Pulse Velocity Testing ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

285

IS 712 (1984) - Specification for building limes (Third Revision)

Specification for building limes (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Compressive strength)	2000.0
6 (Setting time)	1000.0
6 (Soundness by Le Chatlier's method)	500.0
6 (Popping and pitting)	500.0
7.1 (Transverse strength Strength)	2000.0
7.1 (Workability(Lime))	500.0
7.1 (Fineness (by wet sieveing) Single Sieve)	500.0
4.1 (Calcium and Magnesium Oxides (on dry basis), percent)	2000.0
4.1 (Magnesium Oxides (on ignited basis), percent)	1000.0
4.1 (Silica, Alumina and ferric oxide (on ignited basis), percent)	3000.0
4.1 (Insoluble residue in dilute acid and alkali (on ignited basis), percent)	1000.0
4.1 (Free moisture content, percent)	1000.0
4.1 (Available lime as CaO, percent)	1000.0

286

CUS/SR/MECH-14 - Trek Bottle

Trek Bottle

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Height)	1000.0
2.0 (Weight)	1000.0
3.0 (Capacity)	1000.0
6.0 (Chemical composition, % by mass)	6000.0
4.0 (Hot water test)	3000.0
5.0 (Cold water test)	3000.0

287

CUS/SR/MECH-13 - Fruit Basket

Fruit Basket

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions)	1000.0
2.0 (Weight)	1000.0

288

CUS/SR/MECH-12 - Casserole

Casserole

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Inside diameter)	1000.0
1.2 (Thickness)	1000.0
2.0 (Capacity)	1000.0

289

CUS/SR/MECH-11 - Insulated Tiffin Carrier

Insulated Tiffin Carrier

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Weight)	1000.0
2.0 (Capacity)	1000.0

290

IS 2547 : Part 2 (1976) - Specification for gypsum building plasters: Part 2 premixed lightweight plasters

Specification for gypsum building plasters: Part 2 premixed lightweight plasters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Compressive Strength )	1000.0
4.1 (Dry set density)	500.0
4.1 (Dry bulk density)	500.0
4.1 (Mechanical Resistance)	500.0
4.1 (Sum of Sodium and Magnesium salt contents expressed as percentage of Sodium oxide (Na2O) & Magnesium of Oxide (MgO)by mass)	3000.0
custom (Degree of whiteness(IS 8042:2015))	1500.0
custom (Setting time (IS 2542))	500.0

291

OIML R 76-1 (2006) - Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests

Non-automatic weighing instruments Part 1: Metrological and technical requirements - Tests

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Weighing balance calibration)	4000.0

292

CUS/SR/MECH/10 - Hoist Chain

Hoist Chain

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Proof Load)	2500.0
2.0 (Breaking load)	2500.0

293

IS 2720 : Part 4 (1985) - Methods of test for soils: Part 4 grain size analysis (Second Revision)

Methods of test for soils: Part 4 grain size analysis (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Grain size analysis manual)	5000.0

294

Woollen Sweater-Girls Cardigan as per TNTBESC Specification - Woollen Sweater-Girls Cardigan as per TNTBESC Specification

Woollen Sweater-Girls Cardigan as per TNTBESC Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Blend)	150.0
1.2 (Yarn)	150.0
1.3 (Fabric)	150.0
1.4 (Seams and Stitches)	150.0
1.5 (Design)	150.0
1.6 (Size)	150.0
1.7 (Colour)	150.0
1.8 (Cuff and Border)	150.0
1.9 (Freedom from defects)	150.0
2.1 (Wool content, percent by mass)	1000.0
2.2 (Acrylic Yarn content, percent by mass)	1000.0
2.3 (Wales/inch)	500.0
2.4 (Course/inch)	500.0
2.5 (Dimensional Change due to relaxation, percent (Along & Across).)	1000.0
2.6 (Solubility in Alkali, percent by mass)	1000.0
2.7 (pH value of Aqueous Extract)	1000.0
2.8 (Colour Fastness to Light)	2000.0
2.9 (Colour Fastness to washing, a) Change in Colour b) Staining of Adjacent Fabric)	1000.0
2.10 (Colour Fastness to Rubbing (Dry & Wet))	1000.0
2.11 (Colour Fastness to Dry Cleaning- a) Change in Colour b) Staining of Solvent)	1000.0
2.12 (Weight, g/sq.m)	1050.0
2.13 (Button Attachment Strength)	1000.0
3.1 (Width across chest)	300.0
3.2 (Length of Cardigan)	300.0
3.3 (Length of Sleeves)	300.0
3.4 (Width of opening at armhole)	300.0
3.5 (Width across shoulder)	300.0
3.6 (Bottom border depth)	300.0
3.7 (Width at bottom)	300.0
3.8 (Sleeve Cuff Depth)	300.0
3.9 (Sleeve Cuff Width)	300.0
3.10 (Width of neck opening)	300.0
3.11 (Depth of neck opening)	300.0
3.12 (Width of Welt)	300.0

295

IS 2595 (2008) - Industrial radiographic testing - Code of practice (Second Revision)

Industrial radiographic testing - Code of practice (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

296

IRS : M-41-97 (1997) - Corrosion Resistant Structural Steel Required for Rolling Stock

Corrosion Resistant Structural Steel Required for Rolling Stock

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Carbon (% by mass))	700.0
3.1 (Manganese (% by mass))	700.0
3.1 (Silicon (% by mass))	700.0
3.1 (Nickel (% by mass))	500.0
3.1 (Copper (% by mass))	500.0
3.1 (Chromium (% by mass))	500.0
3.1 (Sulphur (% by mass))	700.0
3.1 (Phosphorous (% by mass))	700.0
3.1 (Molybdenum (% by mass))	500.0
3.1 (Vanadium (% by mass))	500.0
3.1 (Aluminium (% by mass))	500.0
3.1 (Niobium (% by mass))	500.0
3.1 (Total Incidental Elements (Mo+V+Al+Nb) (% by mass))	-

297

Woollen Sweater-Boys Pullover as per TNTBESC Specification (2022) - CUS Spec- Woollen Sweater-Boys Pullover as per TNTBESC Specification

CUS Spec- Woollen Sweater-Boys Pullover as per TNTBESC Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Blend)	150.0
1.2 (Yarn)	150.0
1.3 (Fabric)	150.0
1.4 (Seams and Stitches)	150.0
1.5 (Design)	150.0
1.6 (Size)	150.0
1.7 (Colour)	150.0
1.8 (Cuff and Border)	150.0
1.9 (Freedom from defects)	150.0
2.1 (Wool Content, percent by mass)	1000.0
2.2 (Acrylic Yarn content, percent by mass)	1000.0
2.3 (Wales/inch)	1000.0
2.4 (Course/inch)	1000.0
2.5 (Dimensional Change due to relaxation, percent (Along & Across).)	1000.0
2.6 (Solubility in Alkali, percent by mass)	1000.0
2.7 (pH value of Aqueous Extract)	1000.0
2.8 (Colour Fastness to Light)	2000.0
2.9 (Colour Fastness to washing, a) Change in Colour b) Staining of Adjacent Fabric)	1000.0
2.10 (Colour Fastness to Rubbing (Dry & Wet))	1000.0
2.11 (Colour Fastness to Dry Cleaning- a) Change in Colour b) Staining of Solvent)	1000.0
2.12 (Weight, g/sq.m)	1050.0
3.1 (Width across chest)	300.0
3.2 (Length of Pullover)	300.0
3.3 (Length of Sleeves)	300.0
3.4 (Width of opening at armhole)	300.0
3.5 (Width across shoulder)	300.0
3.6 (Bottom border depth)	300.0
3.7 (Width at bottom)	300.0
3.8 (Cuff Depth)	300.0
3.9 (Cuff Width)	300.0
3.10 (Width of neck opening)	300.0
3.11 (Depth of neck opening)	300.0
3.12 (Width of Welt)	300.0

298

RDSO SPECIFICATION NO. WD-01-HLS-94 - Spring Steel Rod/Bar as per RDSO SPECIFICATION NO. WD-01-HLS-94

Spring Steel Rod/Bar as per RDSO SPECIFICATION NO. WD-01-HLS-94

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Chemical Composition)	5000.0
1.2 (Surface Hardness)	2000.0
1.3 (Microstructure)	3000.0
1.4 (Determination of Grain Size)	3000.0
1.5 (Determination of Inclusion Content)	4000.0
1.6 (Determination of De-Carburization)	3000.0

299

Cust Spfn UPVC Window Profile - UPVC Window Profile

UPVC Window Profile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension General)	1000.0
2 (Density / Specific Gravity)	1000.0
4 (Impact Strength Izod)	2000.0
5 (Vicat Softening Temperature)	1500.0
6 (Water Absorption at Ambient Temperature)	1000.0
7 (Drop Test at Normal Temperature)	1000.0
8 (Drop Test at Low Temperature)	2000.0
9 (Tensile Strength and Elongation Before Ageing)	2000.0
3 (Hardness Test Normal Condition)	1000.0
10 (Mass of Profile)	1000.0
11 (Resistance to Impact by Falling mass)	2000.0
12 (Heat Ageing Test)	2000.0
13 (Flexural Strength)	2000.0
14 (Flammability Test)	2000.0
15 (Ash Content Test)	2000.0
16 (Tensile Strength)	2000.0
17 (Impact Strength Charpy)	2000.0
19 (Titanium Di-oxide)	2000.0
20 (Calcium Carbonate)	2000.0
21 (Limiting Oxygen Index Test)	5000.0
18 (Heat Reversion Test)	2000.0
22 (Flexural Modulus of elasticity)	2000.0
23 (Visual Appearance)	1000.0
24 (Identification of Material)	2000.0
25 (Lead content)	2000.0

300

IS : 7098(Part 1)1988, Reaff 2020 Amdt-5 (1988) - Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable Part 1 for working voltage upto and Including 1100Volt

Specification for Cross linked Polyethylene Insulated PVC Sheathed Cable Part 1 for working voltage upto and Including 1100Volt

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Type tests ( XLPE insulated, PVC sheathed, Single Core))	20000.0
15.1 (Type tests (XLPE insulated, PVC sheathed, Two Core ))	22000.0
15.1 (Type tests ( XLPE insulated, PVC sheathed, Three Core ))	24000.0
15.1 (Type tests (XLPE insulated, PVC sheathed, Three and Half or four core))	26000.0
15.2 (Acceptance tests ( XLPE insulated, PVC sheathed, Single Core ))	12000.0
15.2 (Acceptance tests ( XLPE insulated, PVC sheathed, Two Core ))	14000.0
15.2 (Acceptance tests ( XLPE insulated, PVC sheathed, Three Core ))	16000.0
15.2 (Acceptance tests ( XLPE insulated, PVC sheathed, Three and Half or four core ))	18000.0
15.1 (Type tests ( Single Core FRLS Cable))	35000.0
15.1 (Type tests ( Two core FRLS Cable ))	40000.0
15.1 (Type tests (Three core FRLS Cable))	45000.0
15.1 (Type tests ( Three and Half or four core FRLS Cable))	50000.0
15.2 (Acceptance tests (Single core FRLS Cable))	12000.0
15.2 (Acceptance tests ( Two core FRLS Cable ))	17000.0
15.2 (Acceptance tests ( Three coreFRLS Cable ))	22000.0
15.2 (Acceptance tests ( Three and Half or four core FRLS Cable ))	27000.0
15.1.1 & 15.2.1 (FRLSH for all type of samples)	20000.0
15.1.a.ii (Tensile Test (for Aluminum) Conductor read with IS : 8130-1984)	1000.0
15.1.a.iii (Wrapping Test ( For aluminum) as Per IS : 8130:1984 Clause 6.2.2)	500.0
15.1.1 & 15.2.1 (FRLSH for all type of samples)	20000.0
15.1.a.iv (Resistance Test Read With IS : 10810( Part 5))	2000.0