| 241 |
2595 (2008) - INDUSTRIAL RADIOGRAPHIC TESTING —CODE OF PRACTICE |
INDUSTRIAL RADIOGRAPHIC TESTING —CODE OF PRACTICE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Radiographic Examination) |
2000.0 |
|
|
| 242 |
IS 4748 (2021) - Steels - Micrographic determination of the apparent grain size (Third Revision) |
Steels - Micrographic determination of the apparent grain size (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 4748 (Grain Size) |
3500.0 |
|
|
| 243 |
Customized Specification for EPDM Rubber (2023) - Customized Specification for EPDM Rubber |
Customized Specification for EPDM Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Hardness Shore A) |
1000.0 |
|
| 1.2 (Polymer Identification (FTIR Method)) |
2000.0 |
|
|
| 244 |
IS 4454 : Part 1 (2001) - Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.3 (Torsion Test) |
1000.0 |
|
|
| 245 |
IS 516 (Part 1/Sec 1) : 2021 (3 set CC cubes) - Hardened Concrete —Methods of Test
(Part 1 Testing of Strength of Hardened Concrete)
(Section 1 Compressive, Flexural and Split Tensile Strength) |
Hardened Concrete —Methods of Test
(Part 1 Testing of Strength of Hardened Concrete)
(Section 1 Compressive, Flexural and Split Tensile Strength) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Compressive strength,MPa) |
3600.0 |
|
|
| 246 |
IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY |
WHITE CEMENT BASED POLYMERIC PUTTY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.5 Table 1(iii) (Initial Setting time-Annex D in minutes) |
200.0 |
|
| 4.5 Table 1(iii) (Final Setting time-Annex D
in minutes) |
200.0 |
|
| 4.6 Optional requirement (Compressive strength, 28 days in N/mm2
(IS 4031 (Part 6))) |
3000.0 |
|
|
| 247 |
IS 1264 (1997) - Brass gravity die castings - Specification (Fourth Revision) |
Brass gravity die castings - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 Table 1 (Copper) |
1000.0 |
|
| 7.1 Table 1 (Tin) |
500.0 |
|
| 7.1 Table 1 (Lead) |
500.0 |
|
| 7.1 Table 1 (Nickel) |
500.0 |
|
| 7.1 Table 1 (Iron) |
500.0 |
|
| 7.1 Table 1 (Aluminium) |
500.0 |
|
| 7.1 Table 1 (Manganese) |
500.0 |
|
| 7.1 Table 1 (Silicon) |
500.0 |
|
| 7.1 Table 1 (Total Impurities (excluding Ni+Pb+Al)) |
500.0 |
|
| 7.1 Table 1 (Zinc) |
1000.0 |
|
|
| 248 |
ASTM - A276/A276M (2010) - Standard Specification for Stainless Steel Bars and Shapes |
Standard Specification for Stainless Steel Bars and Shapes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Carbon) |
1000.0 |
|
| Table 1 (Manganese) |
1000.0 |
|
| Table 1 (Phosphorus) |
1000.0 |
|
| Table 1 (Sulfur) |
1000.0 |
|
| Table 1 (Silicon) |
1000.0 |
|
| Table 1 (Chromium) |
1000.0 |
|
| Table 1 (Nickel) |
1000.0 |
|
| Table 1 (Molybdenum) |
1000.0 |
|
|
| 249 |
IS/IEC60947-1 - Low-voltage switchgear and control gear - Part 1: General rules |
Low-voltage switchgear and control gear - Part 1: General rules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.3 & 8.3.3.4 (The dielectric test (Power frequency withstand Test)) |
5000.0 |
|
| 8.3.3.3 (Temperature-rise limits of terminals - Table 2 as per IS/IEC 60947 -Part-1:2004) |
25000.0 |
|
| 10 (Marking) |
- |
|
|
| 250 |
IS/IEC 60898 : PART 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 251 |
1542 (1992) - Sand for Plastering |
Sand for Plastering |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Grading of Sand, (IS 2386 Part 1))) |
2000.0 |
|
| 4.4 (Compressive Strength (IS Appendix A of IS 2250), N/mm^2) |
2000.0 |
|
| 5.2 (Fineness Modulus of sand (IS 2386 (Part 1) from gradation)) |
500.0 |
|
| 4.4.1 (Water Required for Gauging (IS 1727 cl 9.5.3), %) |
1000.0 |
|
| 4.2 (Deleterious Materials, General observation (presence of iron pyrites, alkalies, salts, coal, mica, shale etc. - IS 2386)) |
1000.0 |
|
| 4.3 (Deleterious Materials, (a) Clay, Silt and Dust as per IS 2386 (Part 2) and (b) Organic impurities as per IS 2386 (Part -2 )) |
2000.0 |
|
| 6.2 (Bulk density-loose) |
500.0 |
|
| 6.2 (Bulk density-Compacted) |
500.0 |
|
| 6.2 (Water absorption) |
1000.0 |
|
| 6.2 (Specific gravity) |
500.0 |
|
| 4.1 (General - Visual Observation.) |
500.0 |
|
| custom (Materials finer than 75 microns IS sieve) |
1000.0 |
|
|
| 252 |
CUS/SR/MECH-17 - Aluminium composite panel |
Aluminium composite panel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Total Thickness, mm) |
1000.0 |
|
| 2.0 (Breaking load) |
3000.0 |
|
| 3.0 (Panel Thickness) |
1000.0 |
|
| 4.0 (Weight, kg/m²) |
1000.0 |
|
| 5.0 (Tensile strength, N/mm²) |
1000.0 |
|
| 6.0 (Yield strength, N/mm²) |
1000.0 |
|
| 7.0 (Percentage Elongation, %) |
1000.0 |
|
|
| 253 |
RDSO IRS S 63/2015 : Part 1 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 254 |
RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Conductor) |
100.0 |
|
| 3.2.1 (Insulation ) |
100.0 |
|
| 3.2.3 (Insulation ) |
100.0 |
|
| 3.2.4 (Insulation ) |
250.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.3.1 (LAYING UP (for power cable only)) |
100.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.4.1 (Inner Sheath) |
100.0 |
|
| 3.5.1 (Armouring) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for power cable only)) |
100.0 |
|
| 3.6.1 (OUTER SHEATH) |
100.0 |
|
| 4.1 (Marking) |
100.0 |
|
| 5.2 (a) (Dimensions) |
1000.0 |
|
| 5.2 (a) (Elongation of annealed copper) |
1000.0 |
|
| 5.2 (b) (Conductor resistance ) |
2000.0 |
|
| 5.2 (c) (Dimensions of Armour Wires) |
1000.0 |
|
| 5.3 (c) (Tensile Strength ) |
1000.0 |
|
| 5.2 (c) (Elongation ) |
1000.0 |
|
| 5.2 (c) (Torsion test) |
1000.0 |
|
| 5.2 (c) (Winding test ) |
1000.0 |
|
| 5.2 (c) (Mass of Zinc coating test) |
1000.0 |
|
| 5.2 (c) (Uniformity of Zinc coating) |
1000.0 |
|
| 5.2 (c) (Resistivity test.) |
1500.0 |
|
| 5.2 (c) (closeness of armour tape) |
100.0 |
|
| 5.2 (d) (Thickness of insulation ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (d) (Thickness of Outer sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of inner sheath ) |
500.0 |
|
| Cl. 5.2(e)) (Tensile Strength of insulation) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength Insulation variation ) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength inner sheath variation ) |
500.0 |
|
| Cl. 5.2(e) ( Tensile strength outer sheath variartion) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath variation) |
500.0 |
|
| 5.2 (f) (Flammability Test) |
500.0 |
|
| 5.2.g) (High Voltage 4 kV a.c.) |
1500.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1000.0 |
|
| 5.2 (i) (Water immersion test AC TEST) |
1500.0 |
|
| 5.2 (i) (Water immersion test DC TEST) |
3000.0 |
|
| 5.2 (j) (visual inspection) |
100.0 |
|
| 5.2 (j) (Sequential marking . ) |
100.0 |
|
| 5.5.a) (Depth of indentation) |
1000.0 |
|
|
| 255 |
Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements - Test as per Manufacture Specification |
Test as per Manufacture Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1kVA UPS Test as per Manufacture Specification) |
10000.0 |
|
| 2 (2kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 3 (3kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 4 (5kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 5 (10kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 6 (15kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 7 (20kVA UPS Test as per Manufacture Specification) |
40000.0 |
|
| 8 (Scientist Charges for Onsite Testing per day) |
5000.0 |
|
|
| 256 |
Bituminous Membrane-L-n-T (2022) - Water Proofing Membrane Firms Specification |
Water Proofing Membrane Firms Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Bituminous Membrane Results Attached Annexure) |
21000.0 |
|
|
| 257 |
IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IBR 1950 (Welder qualification) |
4500.0 |
|
| NTH Additional Charges for Testing (Scientist Charges) |
5000.0 |
|
|
| 258 |
IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963) |
2000.0 |
|
| 2 (Test for Specific Gravity
(IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
| 4 (Test for Bulk Density-Loose condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 5 (Test for Bulk Density-Compacted condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 6 (Test for Silt content- (CPWD Specification)) |
1000.0 |
|
| 7 (Deleterious Materials) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 9 (Test for Alkali aggregate reaction- Chemical method
(IS 2386(Part 7):1963)) |
3000.0 |
|
| 10 (Test for bulking of sand) |
1000.0 |
|
| Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT) |
1200.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1200.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1200.0 |
|
| 8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963)) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
|
| 259 |
CUS/SR/MECH-16 - Nylon Rope |
Nylon Rope |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Breaking load, kN) |
3000.0 |
|
|
| 260 |
Industrial Training - Industrial Training - Electrical Laboratory |
Industrial Training - Electrical Laboratory |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Industrial Training - Electrical Laboratory) |
1.0 |
|
|
| 261 |
IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1 (Hydrostatic Characteristics) |
5000.0 |
|
| 7.1.3 (Length) |
1000.0 |
|
| 7.1.2 (Wall Thickness) |
1000.0 |
|
| 7.1.1 (Diameter at any point ) |
1000.0 |
|
| 9.4 (Reversion Test) |
2000.0 |
|
|
| 262 |
Customer Specification ALL (2022) - Cust Spfn. Test Result |
Cust Spfn. Test Result |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Results of the Tests - RPPT) |
5000.0 |
|
| 2 (Results of the Tests - Electrical) |
1500.0 |
|
| 2 (Results of Tests) |
6000.0 |
|
| 3 (Test Results) |
5500.0 |
|
| 5 (Effect on water) |
2000.0 |
|
| 6 (Results of the Test(All other Custom Test)) |
15500.0 |
|
| 7 (Results of Test(all other Custom tests)) |
14000.0 |
|
| 8 (Vicat Softening Temperature) |
1500.0 |
|
| 9 (Opacity Test) |
2000.0 |
|
| 10 (Results of the Test) |
1.0 |
|
| 11 (Results of the Tests) |
5000.0 |
|
| 12 (100% Cotton Test) |
2000.0 |
|
| 13 (100% Cotton Test) |
2000.0 |
|
| 14 (Identification of Material) |
2000.0 |
|
| 15 (Results of the Tests Handloom Cotton Bed sheet) |
26400.0 |
|
| 16 (Results of the Tests firms requirement handloom cotton bed sheet) |
9400.0 |
|
| 17 (Results of the Test Custom spfn) |
11000.0 |
|
| 18 (Results of Tests-Raincoat) |
9000.0 |
|
| 19 (Water Absorption Test at RT) |
1000.0 |
|
| 20 (Result of the Tests (Foam Material) Attached Annexure) |
6000.0 |
|
| 21 (Results of the Tests (SMC profile) Annexure attached) |
21500.0 |
|
| 22 (Result of the Tests (UPVC profile) Attached Annexure) |
16500.0 |
|
| 23 (Thickness, mm) |
1000.0 |
|
| 24 (Density at RT) |
1000.0 |
|
| 25 (Hardness Test - Shore A
(Normal Condition)) |
1000.0 |
|
| 26 (Hardness Test - Shore A
(After ageing Condition)) |
2000.0 |
|
| 27 (Results of the Test-Buckram (Annexure attached)) |
31500.0 |
|
| 28 (Accelerated Fading test (After72hours exposure)) |
5000.0 |
|
| 29 (Thickness, mm) |
3000.0 |
|
| 30 (Count) |
1000.0 |
|
| 31 (Fiber Composition) |
2000.0 |
|
| 32 (Results of the Tests (Annexure attached Dungricloth)) |
11000.0 |
|
| 33 (Scouring loss, %) |
1200.0 |
|
| 34 (pH value of aqueous extract (cold method)) |
1200.0 |
|
| 35 (Tensile Strength, MPa) |
2000.0 |
|
| 36 (Elongation, %) |
1000.0 |
|
| 37 (Tensile Strength, MPa & Elongation, %) |
2000.0 |
|
| 38 (Results of Test (Pl. see Annexure attached)) |
12500.0 |
|
| 39 (Results of Tests (Annexure Attached AF5200)) |
15000.0 |
|
| 40 (Softening point) |
2000.0 |
|
| 41 (Thickness test) |
1000.0 |
|
| 42 (Elongation, % at 23deg Both Longitudinal & Transverse direction) |
1000.0 |
|
| 43 (Joint Strength, N/5cm width, in Longitudinal & Transverse direction) |
2000.0 |
|
| 44 (Tear Strength, N in Longitudinal & Transverse direction) |
2000.0 |
|
| 45 (Cold Flexibility at (-)2degC) |
2000.0 |
|
| 46 (Results of the tests(Annexure-Polycarbonate Sheet)) |
9000.0 |
|
| 47 (Shore Hardness, Shore-A) |
1000.0 |
|
| 48 (Identification of Material-FTIR) |
2000.0 |
|
| 49 (Thickness of foam-Seat) |
1000.0 |
|
| 50 (Thickness of Foam-Back) |
1000.0 |
|
| 51 (Density of Foam-Seat) |
1000.0 |
|
| 52 (Density of Foam-Back) |
1000.0 |
|
| 53 (Powder coating thickness) |
2000.0 |
|
| 54 (Thickness of Fabric) |
1000.0 |
|
| 55 (Dimension Seat Size) |
1000.0 |
|
| 56 (Dimension Back size) |
1000.0 |
|
| 57 (UV Exposure (Protection) Test) |
5000.0 |
|
| 58 (Results of tests (Polycarbonate sheet)) |
4000.0 |
|
|
| 263 |
IS 3203 (1982) - Methods of testing local thickness of electroplated coatings (First Revision) |
Methods of testing local thickness of electroplated coatings (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 3203 (Coating thickness) |
2000.0 |
|
|
| 264 |
IS 1868 (1996) - Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 c (Eddy current method) (Thickness of Coating, Micron) |
2000.0 |
|
|
| 265 |
ASTM A240/A240M-15b (2015) - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Carbon) |
1000.0 |
|
| Table 1 (Manganese) |
1000.0 |
|
| Table 1 (Phosphorus) |
1000.0 |
|
| Table 1 (Sulphur) |
1000.0 |
|
| Table 1 (Silicon) |
2000.0 |
|
| Table 1 (Chromium) |
1000.0 |
|
| Table 1 (Nickel) |
1000.0 |
|
| Table 1 (Molybdenum) |
1000.0 |
|
|
| 266 |
ASTM A312 (2016) - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Carbon) |
500.0 |
|
| 7 (Manganese) |
500.0 |
|
| 7 (Phosphorus) |
500.0 |
|
| 7 (Sulfur) |
500.0 |
|
| 7 (Silicon) |
500.0 |
|
| 7 (Chromium) |
500.0 |
|
| 7 (Nickel) |
500.0 |
|
| 7 (Molybdenum) |
500.0 |
|
| 9 (Wall Thickness, mm) |
1000.0 |
|
| 10 (Tensile Strength) |
1000.0 |
|
| 10 (Yield Strength) |
1000.0 |
|
| 10 (Elongation) |
1000.0 |
|
| 9.1 (Outside diameter, mm) |
1000.0 |
|
| 9.1 (Mass per meter, kg/m) |
1000.0 |
|
|
| 267 |
Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification |
Test as per Manufacturer/Customer Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test as per Manufacture / Customer Specification) |
25000.0 |
|
| 2 (Electrical conductivity test in IACS as per IS 613.) |
5000.0 |
|
| 3 (Electrical Resistance Test as per IS 3635.) |
3000.0 |
|
| 4 (Purity of Copper as per IS 191) |
2000.0 |
|
| 5 (Tensile and Elongation test for Insulation and Outer Sheath on the lines of IS 694.) |
3000.0 |
|
| 6 (Test for over all Dimension) |
1000.0 |
|
| 7 (Density) |
1000.0 |
|
| 8 (Electrical Resistivity Test IS 1897 in accordance with IS 3635.) |
1500.0 |
|
| 9 (CHEMICAL COMPOSITION as per IS 440) |
3000.0 |
|
| 10 (Uniformity of Zinc coating) |
1500.0 |
|
| 11 (Marking of Sample) |
1.0 |
|
| 12 (Dimensions as per Table 1 & 2 of IEC 62561-2) |
1000.0 |
|
| 13 (Electrical Resistivity - Table 2 & 4 of IEC 62561-2) |
2000.0 |
|
| 14 (Tensile Strength as per Cl.No:5.2.5 of IEC 62561-2 :2012) |
1500.0 |
|
| 15 (Coating Test as per Cl.No:5.2.2 of IEC 62561-2 :2012) |
2000.0 |
|
| 16 (Testing as per UL 94 Classification Requirement (V-0), Vertical Flame Test and Customer Test request.) |
5000.0 |
|
| 17 (LSZH Property) |
20000.0 |
|
| 19 (Mechanical Endurance test for 1000 cycles on the lines of relevant para of IEC 62271-103:2011) |
15000.0 |
|
| 20 (Electrical Resistivity Test as per IEC 62561-7) |
10000.0 |
|
| 21 (Determination of Insulation Resistance as per IS 10810: Part 43: 1984 (Reaffirmed Year: 2021 )) |
1500.0 |
|
| 22 (Thermal profile test – as per PGCIL Specification Cl. No 2.6) |
15000.0 |
|
| 23 (Magnetic power loss test as per PGCIL technical Specification Cl 2.5.) |
15000.0 |
|
| 24 (Drawing Verification) |
6000.0 |
|
| 25 (Functional Verification of Fail Safe Circuits in Heavy Escalator) |
20000.0 |
|
| 24 (Drawing Verification) |
6000.0 |
|
| 26 (Mechanical endurance test for 1000 Cycles on lines of relevant para of IEC 62271-102) |
15000.0 |
|
| 27 (Test as per RDSO Specification:T1/ SPC/OHE/CAT(CuCd)/0971 Effect from 04.01.2021 for Individual wire & Conductor (Values Specified / Declared by Power Grid)) |
64700.0 |
|
| 28 (Test as per RDSO Specification:T1/ SPC / OHE/ CW /0971 Effect from 01.01.2021 (Values Specified / Declared by Power Grid)) |
15000.0 |
|
| 29 (Type Test as per RDSO spec No. IRS : S76-89) |
25000.0 |
|
| 37 Note Authenticator Cum Sorting Machines (3+1) (Note Authenticator Cum Sorting Machines (3+1)
Tests and observations as per Bank Specification) |
40000.0 |
|
| 31 (onsite : Scientist charges) |
5000.0 |
|
| 32 (Lightning Impulse Voltage Dry Test) |
15000.0 |
|
| 33 Note Authenticator Cum Sorting Machines (2+1) (Note Authenticator Cum Sorting Machines (2+1)
Tests and observations as per Bank Specification) |
40000.0 |
|
| 34 Note Authenticator Cum Sorting Machines (4+1) (Note Authenticator Cum Sorting Machines (4+1)
Tests and observations as per Bank Specification) |
50000.0 |
|
| 35 Note Authenticator Cum Sorting Machines (8+1) (Note Authenticator Cum Sorting Machines (8+1)
Tests and observations as per Bank Specification) |
50000.0 |
|
| 36 (Scientist Charges ( for 2 persons, 5 days)) |
50000.0 |
|
| 30 Note Authenticator Cum Sorting Machines (1+1) (Note Authenticator Cum Sorting Machines (1+1) Tests and observations as per Bank Specification) |
35000.0 |
|
| 1 (Test as per Manufacture / Customer Specification) |
25000.0 |
|
| 38 (Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification) |
3000.0 |
|
| 39 (Tests as per Manufacture/Customer Specification) |
5000.0 |
|
| 40 (Tests as per Manufacture/Customer Specification) |
10000.0 |
|
| 41 (Tests as per Manufacture/Customer Specification) |
15000.0 |
|
| 42 (Tests as per Manufacture/Customer Specification) |
20000.0 |
|
| 43 (Conformity Tests for Battery operated platform truck as per IS:10311-1982) |
30000.0 |
|
| 44 (Manufacture/Customer Specification) |
40000.0 |
|
| 47 (Manufacture/Customer Specification) |
100000.0 |
|
| 48 (Manufacture/Customer Specification) |
200000.0 |
|
|
| 268 |
ISTA 1G - Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS |
Test Procedure ( International Safe Transit Association) Testing of Packaging of 6 kVA UPS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 269 |
Customer Requirement - Electronics/IT/RF Product |
Electronics/IT/RF Product |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (As per Customer requirement) |
20000.0 |
|
|
| 270 |
IS 1161 (2014) - Steel Tube for Structural Purposes |
Steel Tube for Structural Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
